a28bbd68eb
"standby clone": improve replication slots handling
...
Ensure replication slot is created on the upstream node and deleted from
the source node, if upstream node and source nodes differ.
2017-09-06 12:16:02 +09:00
bd07a34472
"standby clone": improve log messages
...
Make it clearer which nodes are being connected to, and why.
2017-09-06 10:15:52 +09:00
e21a3ef7ec
Fix typo
2017-09-06 09:31:16 +09:00
1c015c72a0
"cluster show": display "location" field too
2017-09-05 14:25:29 +09:00
9f0d44373b
"cluster show": syntax fix
2017-09-05 13:35:25 +09:00
1ef00f5a3b
repmgrd: parse "follow_command" during cascaded standby failover
2017-09-05 11:19:25 +09:00
eeef0b5df5
Trim recovery.conf lines when outputting as debug log lines
2017-09-05 10:33:41 +09:00
5b5b456ecb
"standby switchover": improve logging
...
Also no need to disconnect/reconnect from/to local node while it promotes.
2017-09-05 10:26:27 +09:00
d82e936556
"standby promote": improve logging
...
Specifically state which server is being promoted; this is particularly
important when the promotion occurs as part of a series of other operations,
e.g. "standby switchover".
Also no need to disconnect/reconnect while the server is promoted.
2017-09-05 09:43:16 +09:00
78e6bdeebe
Have repmgrd parse "standby follow --upstream-node-id=%n"
2017-09-04 13:42:50 +09:00
9a0f45d7d3
Standardize quotation marks in log messages
2017-09-04 10:56:57 +09:00
1445d1002c
Clean up log messages
...
Remove legacy trailing new lines.
2017-09-04 10:52:42 +09:00
22f5576cc2
Fix typo
2017-09-04 09:41:00 +09:00
47a4b49890
Add "repmgr standby follow --upstream-node-id"
...
In an automatic failover situation, after a standby has been promoted
there's a risk the original primary may become available again before
"standby follow" is issued on another standby node, in which case "standby
follow" will reconnect to the original primary.
As the standby's repmgrd will have received a notification from the new
primary, it will know the primary's ID and can therefore explicitly
direct "standby follow" to follow that primary.
2017-09-04 09:11:59 +09:00
3aeceab081
"standby follow": add missing sleep() call when --wait specified
2017-09-02 13:11:03 +09:00
72e037d55b
SCRIPTS_built also required for 9.4
2017-09-02 12:03:17 +09:00
4ba3e67e11
Hacky workaround for hacky workaround in 9.4
...
For some reason 9.4 doesn't install the repmgr/repmgrd binaries
with "SCRIPTS_built". "SCRIPTS" seems to work for both 9.4 and
later versions.
2017-09-02 11:54:07 +09:00
ab6702891a
Minor fixes to cascading standby failover.
2017-09-01 13:09:17 +09:00
edb74ccef9
Various fixes to "repmgr node rejoin"
2017-09-01 11:30:31 +09:00
f9f05158d2
Fix "cluster show --csv" output
2017-09-01 00:14:01 +09:00
c7423ebb44
Various minor fixes
2017-08-31 23:54:52 +09:00
91941183bc
Use replication user, if set, when checking replication connections
2017-08-31 17:54:49 +09:00
1517c06bb1
Document "replication_user" configuration file parameter.
2017-08-31 17:29:09 +09:00
04c9779561
Add documentation about passwords and recovery.conf
2017-08-31 15:24:09 +09:00
0e0b221507
Add configuration file setting "use_primary_conninfo_password"
...
If, for whatever reason, the upstream server password needs to be set
in "primary_conninfo", enable it to be extracted from $PGPASSWORD.
2017-08-31 14:57:07 +09:00
677cd9073a
Document parameter "degraded_monitoring_timeout"
...
Also ensure it can be reloaded.
2017-08-31 14:48:51 +09:00
7fecc611a9
Update minimum version check in configure.in
2017-08-31 13:33:45 +09:00
ed16c32fe7
Check minimum server version for pg_rewind
2017-08-31 13:30:59 +09:00
705b52fde4
Use actual program name rather than "repmgr" when executing remote commands
...
It's possible some distribution packages may assign a different name to the
"repmgr" binary (typically appending a version number), so we shouldn't hard-code
into the command string.
However it's reasonable to assume the "repmgr" binary will have the same name
across a replication cluster so we won't engage in any contortions to account
for possible variations.
See: https://github.com/2ndQuadrant/repmgr/issues/323
2017-08-31 11:04:11 +09:00
ae634100a3
"standby switchover": sanity-check remote "repmgr" binary before proceeding
2017-08-31 11:00:14 +09:00
8e35a415a9
Refactor extraction of value to use for "primary_conninfo"
...
Also add improved error detection.
Basically in the worst case we want to enable the user to clone a standby
from Barman even if the upstream node is not running/reachable, as long as
the user explicitly provides a string to use for "primary_conninfo".
2017-08-31 09:59:30 +09:00
dfb796ca8f
Check config file *before* checking command line parameters
...
Validity of command line parameters may depened on settings in the configuration
file.
2017-08-31 09:55:32 +09:00
13f2d46e92
"standby clone": exit with 0 after successful --dry-run
2017-08-30 10:00:48 +09:00
8b03859dbe
"standby clone": add early sanity check for external configuration files
...
This still requires an SSH connection, so we need to check early before
the cloning starts, and also emit useful information for --dry-run.
2017-08-29 22:11:16 +09:00
16d7282c9d
Update README
2017-08-29 16:32:29 +09:00
154c76e5e7
repmgrd: improve cascaded standby failover
...
Check primary is available.
2017-08-29 15:29:17 +09:00
6d02415d26
Ensure "log_status_interval" gets reloaded
2017-08-29 15:26:10 +09:00
9cf3508979
Log configuration parameters which change following a reload
2017-08-29 13:08:37 +09:00
e0888c1f62
repmgrd: handle SIGHUP
2017-08-29 12:55:13 +09:00
df827c6518
Update repmgrd documentation
2017-08-29 11:04:30 +09:00
0b9c538cb9
Update README1
2017-08-29 08:13:42 +09:00
e40a14289d
Update README
2017-08-28 17:33:38 +09:00
725bcf3177
Update README
...
Document replication slots.
2017-08-28 17:26:00 +09:00
4d5ff146e0
Update README
2017-08-28 17:07:14 +09:00
0b7dbb845c
Add warning for --dry-run when not effective
2017-08-28 15:10:57 +09:00
b900f9996f
"repmgr standby clone": add --dry-run option
2017-08-28 15:04:50 +09:00
e05bab8284
"standby switchover": epxlictly confirm suitability for --pg-rewind
...
If --force-rewind requested.
2017-08-28 14:50:08 +09:00
4ba2291cdd
Update README
2017-08-28 12:32:05 +09:00
3b28cfa70e
Update "standby switchover" command reference
2017-08-28 11:58:10 +09:00
4b2fb7d15b
Update "repmgr primary ..." --help output and command reference
2017-08-28 11:53:41 +09:00
Ian Barwick