This suppresses display of the usually lengthy "conninfo" column, mainly
useful for generating a compact table suitable for pasting into emails,
chats etc. without messy line breaks.
Implements GitHub #521.
Most of the time we can simply get the version number directly from
the connection handle. Previously it was held in a global variable,
which was an icky way of doing things.
In a few special cases we also need the actual version string, which
is obtained directly from the database.
Also we can now simplify "cluster (matrix|crosscheck)" commands as
beginning with v4.0, we know where the configuration file is, so can
provide that when invoking repmgr remotely.
This is to facilitate remote invocation of repmgr when the repmgr
binary is located somewhere other than the PostgreSQL binary directory, as it
cannot be assumed all package maintainers will install repmgr there.
This parameter is optional; if not set (the default), repmgr will fall back
to "pg_bindir" (if set).
Addresses GitHub #246.
In some circumstances, e.g. while performing a switchover, it is essential
that repmgrd does not take any kind of failover action, as this will put
the cluster into an incorrect state.
Previously it was necessary to stop repmgrd on all nodes (or at least
those nodes which repmgrd would consider as promotion candidates), however
this is a cumbersome and potentially risk-prone operation, particularly if the
replication cluster contains more than a couple of servers.
To prevent this issue from occurring, this patch introduces the ability
to "pause" repmgrd on all nodes wth a single command ("repmgr daemon pause")
which notifies repmgrd not to take any failover action until the node
is "unpaused" ("repmgr daemon unpause").
"repmgr daemon status" provides an overview of each node and whether repmgrd
is running, and if so whether it is paused.
"repmgr standby switchover" has been modified to automatically pause repmgrd
while carrying out the switchover.
See documentation for further details.
On the rejoined node, if a replication slot for the new upstream exists
(which is typically the case after a failover), delete that slot.
Also emit a warning about any inactive replication slots which may need
to be cleaned up manually.
GitHub #499.
This suppresses log output below log level ERROR. This is useful mainly
when repmgr is being executed programmatically, e.g. in a cronjob,
where it's only useful to receive output if something goes wrong.
Note we advise against using this option when executing repmgr
commands which operate on PostgreSQL nodes (standby follow,
standby promote, standby switchover, node rejoin), particularly when
executed by repmgrd, as the log output will provide valuable
troubleshooting information.
Implements suggestion in GitHub #468.
This matches the behaviour of other PostgreSQL utilities such as psql, though
repmgr will only abort once all command line options are parsed, so as many
errors as possible are found and displayed. If a repmgr "command" (e.g.
"repmgr primary ..." was provided, a hint about the relevant command
help section (e.g. "repmgr primary --help") will be provided alongside
the generic help command (i.e. "repmgr --help").
Addresses GitHub #464, with further improvements.
When executed with --dry-run, repmgr outputs detail about what would
happen using log level INFO. If the log_level is configured to
NOTICE or higher, it's possible some or all of the --dry-run output
might not be displayed.
Addresses GitHub #441.
This enables explicit provision of an external configuration file
directory, which if set will be passed to "pg_ctl" as the -D
parameter. Otherwise "pg_ctl" will default to using the data directory,
which will cause some operations to fail if the configuration files
are not present there.
Note this is implemented primarily for feature completeness and for
development/testing purposes. Users who have installed "repmgr" from
a package should not rely on "pg_ctl" to stop/start/restart PostgreSQL,
instead they should set the appropriate "service_..._command" for their
operating system. For more details see:
https://repmgr.org/docs/4.0/configuration-service-commands.html
Note: in a future release, the presence of "config_directory" in repmgr.conf
will be used to implictly set "--copy-external-config-files=samepath" when
cloning a standby; this is a behaviour change so will be implemented in the
next major realease (repmgr 4.1).
Implements GitHub #424.
When establishing a superuser connection, the connection parameters
were being copied from the existing (non-superuser) connection, which
in some circumstances can lead to that user's password being
included in the copied parameter list. The password parameter, if set, will
now always be removed, which will cause libpq to retrieve the correct
one from the .pgpass file.
Addresses GitHub #400.
Previously repmgr was relying on whatever command was configured to
start PostgreSQL to determine whether the node being rejoined had
started correctly. However it's preferable to actively poll the upstream
to confirm it has restarted and actually attached as a standby before
confirming success of the "node rejoin" action.
This can be overridden with the -W/--no-wait option.
(Note that for consistency with other PostgreSQL utilities, the
short form of the --wait option is now "-w"; this is currently
only used in "repmgr standby follow".)
Also update "repmgr node rejoin" documentation with a list of supported
options, and add some useful index entries for "pg_rewind".
Implements GitHub #415.
pg_rewind is not part of the core distribution for those, but we
provided support in repmgr 3.3 so should extend it to repmgr 4.
Note that there is no check in place whether the pg_rewind binary
exists, so it's up to the user to ensure it's present.
Addresses GitHub #413.
get_superuser_connection() was erroneously using the local node record
to connect to as a superuser, which works when registering the primary
but obviously not when cloning a standby.
Addresses GitHub #380.
This will generate "recovery.conf" for an existing standby.
Typical use-case is a standby cloned manually from an external data
source (e.g. Barman), where "recovery.conf" needs to be created
(and if required a replication slot).
The --dry-run option will check the pre-requisites but not actually
create "recovery.conf" or a replication slot.
This requires that the upstream node is running, a replication connection
can be made and if required a replication slot can be created.
Implements GitHub #382.
Check it's actually possible for the demotion candidate to attach to
the promotion candidate before executing the switchover.
As with other checks of this nature, there's a faint possibility the
situation could change between the time the check is carried out and
the demotion candidate is restarted to connect to the promotion candidate,
but there's not a lot we can do about that. The main purpose is to
be able to catch existing misconfigurations before anything gets changed.
Implements GitHub #370.
If logging output not explicitly rediretced with "-l" in the pg_ctl
options, repmgr would hang waiting for pg_ctl output.
Note that we recommend using the OS-level service commands where
available.
This was required for a specific use case during pre-release
development and is no longer needed now the physical streaming
replication handling is implemented.
