575 Commits

Author	SHA1	Message	Date
Ian Barwick	5722c0a582	doc: fix typo	2020-03-06 17:41:19 +09:00
Ian Barwick	0bc0a28378	standby promote: enable "service_promote_command" in PostgreSQL 12 ... This enables the promote command generated internally by repmgr to be overridden if desired, in the same way as for PostgreSQL 11 and earlier.	2020-03-06 13:21:30 +09:00
Ian Barwick	fb5ce720f3	standby promote: fall back to "pg_ctl promote" if necessary ... From PostgreSQL 12, the SQL-level function "pg_promote()" can be used to promote a PostgreSQL instance, however usage is restricted to superusers and users to whom explicit execution permission for this function has been granted. Therefore, if execution permission is not available, fall back to "pg_ctl promote".	2020-03-06 12:53:37 +09:00
Ian Barwick	6559258b53	doc: update release notes	2020-03-05 17:24:24 +09:00
Ian Barwick	10304a1a3b	doc: update release notes	2020-03-04 17:21:31 +09:00
Ian Barwick	e02e3dae29	doc: update "repmgr cluster show" output example	2020-02-26 16:02:08 +09:00
Ian Barwick	51a7c31833	doc: update "repmgr cluster show" examples	2020-02-25 12:22:19 +09:00
Ian Barwick	2bb89d252b	doc: a witness server is also relevant for primary visibility consensus checks ... Clarify documentation and example to make it clear that a witness server, if present, is also used for primary visibility consensus checks.	2020-02-24 15:25:15 +09:00
Ian Barwick	089b3ecb8b	doc: note PostgreSQL 9.4 EOL	2020-02-14 11:17:06 +09:00
Ian Barwick	6f01c54620	repmgr: improve "standby switchover" completion checks ... There were some corner cases where "repmgr standby switchover" would erroneously report a successful switchover, even if the demotion candidate had not reattached to the promotion candidate. Also improve the logging in various places to make it clearer what is happening on which node.	2020-02-04 15:38:10 +09:00
Ian Barwick	e2a362a171	"node rejoin": check for available replication slots on the rejoin target ... "standby follow" did this already, but "node rejoin" didn't.	2020-02-03 17:03:20 +09:00
Ian Barwick	ab9c84c655	Report error code on follow/rejoin failure due to non-available slot ... Previously, if "repmgr standby follow" or "repmgr node rejoin" failed due to a replication slot not being available, no error code was returned.	2020-02-03 15:03:31 +09:00
Ian Barwick	0141bc2be7	standby switchover: display "shutdown_check_timeout" value in --dry-run mode ... It's useful to be aware of this setting.	2020-01-30 10:30:18 +09:00
Ian Barwick	3ae6691d34	doc: minor clarifications to Debian package info	2020-01-24 10:36:46 +09:00
Ian Barwick	bd8eb82fb9	doc: update repository links to https	2020-01-24 10:29:40 +09:00
Ian Barwick	4d4ed3bcd6	Remove BDR 2.x support ... The BDR 2.x support was conceptual only and was never used in production. As BDR 2.x will be EOL'd shortly, there is no risk it will be needed.	2020-01-16 09:52:42 +09:00
Ian Barwick	7fdf2f1778	Update copyright notices to 2020	2020-01-13 14:06:20 +09:00
Ian Barwick	46222cc0ae	doc: note availability of RHEL 8 packages	2020-01-07 09:44:47 +09:00
Ian Barwick	ab6e5ceab3	doc: add reference to "ssh_options" ... This is listed in "repmgr.conf.sample" but not the main documentation.	2019-11-25 10:17:31 +09:00
Ian Barwick	eb1d5c4e93	doc: link PgBouncer fencing document from main docs	2019-11-21 09:53:53 +09:00
Ian Barwick	b3c09c48bf	doc: document "tablespace_mapping" parameter. ... This was previously only mentioned in "repmgr.conf.sample".	2019-11-20 16:52:35 +09:00
Ian Barwick	21475b9c70	doc: update pgbouncer fencing example ... Add "--log-to-file" to "repmgr standby promote", per recommended practice.	2019-11-19 21:57:17 +09:00
Ian Barwick	95ee576052	doc: fix minor punctuation typo	2019-11-11 15:52:15 +09:00
Ian Barwick	ac753c2ba1	doc: ensure various repmgr.conf values are quoted appropriately	2019-11-08 11:54:31 +09:00
Ian Barwick	c3aba173ea	doc: clarify Barman configuation ... Per confusion noted in GitHub #602.	2019-11-07 14:26:57 +09:00
Ian Barwick	93acdcfda2	doc: add single quotes to "barman_config" example. ... Mandatory from repmgr 5.x.	2019-11-07 14:23:04 +09:00
Ian Barwick	c23162e787	doc: note superuser requirement for "repmgr primary register"	2019-10-25 12:43:39 +09:00
Ian Barwick	63217e436a	doc: note permission requirements for "repmgr standby (promote|switchover) ... Per issues noted in GitHub #595.	2019-10-25 12:43:39 +09:00
Ian Barwick	5405ae7100	doc: note which repmgr versions are supported in the compatibility matrix	2019-10-24 09:46:28 +09:00
Ian Barwick	b007d5ed4b	doc: update README ... Link to compatibility matrix, support section.	2019-10-24 09:42:23 +09:00
Ian Barwick	b74f965f54	standby clone: rename --recovery-conf-only to --replication-conf-only ... A more generic option name to cover pre- and post-Pg12 replication configuration methods. --recovery-conf-only is retained as an alias for backwards compatibility.	2019-10-18 14:44:57 +09:00
Ian Barwick	047249e980	doc: expand section about requesting support	2019-10-18 11:58:13 +09:00
Ian Barwick	14f46b076e	doc: add link to blog entry about Pg12 replication configuration changes	2019-10-18 11:57:52 +09:00
Ian Barwick	8a38188c47	doc: split notes about PostgreSQL 9.3 and 9.4 support into a new subsection	2019-10-15 10:47:12 +09:00
Ian Barwick	5dcca6b053	doc: add note about 4.x development policy	2019-10-15 10:47:09 +09:00
Ian Barwick	a0591afb1e	doc: add repmgr 5.0 release date	2019-10-15 10:29:52 +09:00
Ian Barwick	2304584679	Fix handling of upstream node change check ... repmgrd has a check to see if the upstream node has unexpectedly changed, e.g. if the repmgrd service is paused and the PostgreSQL instance has been pointed to another node. However this check was relying on the node record on the local node being up-to-date, which may not be the case immediately after a failover, when the node is still replaying records updated prior to the node's own record being updated. In this case it will mistakenly assume the node is following the original primary and attempt to restart monitoring, which will fail as the original primary is no longer available. To prevent this, we check against the node's record on the upstream node. Addresses issue noted in GitHub #587 and #588.	2019-10-14 12:28:04 +09:00
Ian Barwick	4aaa24a5f8	Update configuration file conversion script ... Ensure output is quoted.	2019-10-08 10:59:20 +09:00
Ian Barwick	7053ed5b51	doc: update links to Barman documentation	2019-10-08 10:30:41 +09:00
Ian Barwick	a845d7126d	doc: minor updates to "repmgr standby clone" reference ... - remove references to repmgr 4.0.4 (present because feature was added in a minor release, but that's a long time ago) - note configuration is appended to postgresql.auto.conf	2019-10-08 10:21:26 +09:00
Ian Barwick	1c317059cd	doc: clarify use of --recovery-conf-only	2019-10-08 10:03:44 +09:00
Ian Barwick	dcf5bfb649	doc: fix minor formatting error	2019-10-08 09:48:04 +09:00
Ian Barwick	f3c3320a9c	doc: update examples in quickstart guide	2019-10-07 18:27:38 +09:00
Ian Barwick	cfc5bde219	doc: update repmgr.conf samples in Barman section ... From repmgr 5.x we really need to quote all the things.	2019-10-07 12:05:26 +09:00
Ian Barwick	ea57269569	doc: improve instructions for cloning from Barman	2019-10-07 11:56:40 +09:00
Ian Barwick	e8b5b92893	doc: improve Barman standby clone example	2019-10-03 15:52:32 +09:00
Ian Barwick	02bdcf657f	doc: add link to FAQ section about 3rd party package compatibilty	2019-10-03 15:23:57 +09:00
Ian Barwick	405f70f769	doc: clarify barman-cli package usage ... As of Barman 2.8, the barman-cli package has been merged with the core Barman code, so is only requires an explicit mention for Barman 2.0 ~ 2.7.	2019-10-03 14:35:45 +09:00
Ian Barwick	577ca35de5	doc: remove reference to Barman 1.x. ... Barman 1.x is very outdated and should no longer be used anyway.	2019-10-03 14:25:17 +09:00
Martín Marqués	a557f2d69e	Typo in the documentation of the repmgrd configuration ... Signed-off-by: Martín Marqués <martin.marques@2ndquadrant.com>	2019-10-01 09:44:30 -03:00