Ian Barwick
a403da67bc
Consolidate connection closure calls
2018-03-27 16:43:59 +09:00
Ian Barwick
0219f4c91f
Always set "connect_timeout" when pinging a PostgreSQL instance
...
Insert "connect_timeout=2" into the connection parameters, if not
explicitly set by the user. This will prevent excessive wait time
for the host operating system to report a connection timeout.
2018-03-21 11:48:57 +09:00
Ian Barwick
bad034f7ee
repmgrd: remove duplicate local record check in BDR mode
2018-03-07 19:21:33 +09:00
Ian Barwick
cdb504d700
Add event "repmgrd_shutdown"
...
Implements GitHub #393
2018-03-06 11:00:03 +09:00
Ian Barwick
e38a9ec7e1
repmgrd: fix main monitoring loop for witness server
...
Missing "break" was breaking it when following a new primary.
2018-03-02 11:04:22 +09:00
Ian Barwick
64d85587de
repmgrd: check "repmgr" extension is installed before starting
...
Implements GitHub #361 .
2018-02-12 11:38:31 +09:00
Ian Barwick
ec068e38a2
Remove --bdr-only configuration option
...
This was required for a specific use case during pre-release
development and is no longer needed now the physical streaming
replication handling is implemented.
2018-01-25 10:48:09 +09:00
Ian Barwick
26a9e848fd
Update copyright notices to 2018
2018-01-02 10:19:46 +09:00
Ian Barwick
a6cc4d80f0
Add "witness register" functionality
2017-11-15 13:47:45 +09:00
Ian Barwick
aa089820ab
repmgrd: check shared library is loaded
...
If this isn't the case, "repmgrd" will appear to run but not handle
failover correctly.
Address GitHub #337 .
2017-11-10 14:35:17 +09:00
Ian Barwick
d6c27f8938
Standardize quoting in log messages
2017-10-04 09:34:59 +09:00
Ian Barwick
e288d1ae3c
repmgrd: clarify comment about configuration file parsing
...
There's no requirement to provide a configuration file, but if not,
one must be available in one of the default locations.
2017-09-20 09:35:09 +09:00
Martín Marqués
64cebb8b26
When searching for the path of the config file we were using config_file
...
which is the value the user passes with the -f option. If the user didn't
pass a value, this variable will have a value of NULL.
The variable which has the correct path is config_file_path, which will
have the same value provided by config_file if it's a valid file, or
the file if found in one of the default locations.
2017-09-20 09:22:04 +09:00
Ian Barwick
a9f4a027a7
pgindent run
2017-09-11 11:14:13 +09:00
Ian Barwick
e4f7dc8234
Add copyright notices
2017-09-08 13:27:39 +09:00
Ian Barwick
e0888c1f62
repmgrd: handle SIGHUP
2017-08-29 12:55:13 +09:00
Ian Barwick
c1ed248fb1
Handle "event_notifications" when reloading configuration
2017-08-25 23:07:07 +09:00
Ian Barwick
fcd111ac4c
Improve logging output during failover process
2017-08-24 22:44:03 +09:00
Ian Barwick
a659132ea4
repmgrd: write monitoring statistics
2017-08-24 11:49:44 +09:00
Ian Barwick
44d1b96bc3
repmgrd: fix log output
2017-08-22 13:21:16 +09:00
Ian Barwick
7cf3b9b618
repmgrd: improve logging of BDR monitoring
...
Also always log information about event_notification command
2017-07-27 21:12:41 +09:00
Ian Barwick
fed6fba4ef
repmgrd: more fixes for BDR node recovery
2017-07-27 14:13:39 +09:00
Ian Barwick
0dcd479322
Store node status in node record struct
2017-07-17 13:50:17 +09:00
Ian Barwick
ec00202a31
Add configure option --with-bdr-only
...
Builds repmgr with only BDR functionality; other code is disabled
at critical points.
2017-07-16 17:18:34 +09:00
Ian Barwick
a29bc3e0fa
Rename config.[ch] to configfile.[ch]
2017-07-16 09:41:26 +09:00
Ian Barwick
951c7dbd07
repmgrd: in BDR mode, have each repmgrd monitor each node
...
This will cover both the case when an entire node including
repmgrd goes down, and when one PostgreSQL instance goes down
but repmgrd is still up (in which case only one of the repmgrds
will handle the failover).
2017-07-14 15:01:18 +09:00
Ian Barwick
e3b3fb65f0
repmgrd: restrict BDR monitoring to two node setup
...
It's not safe to have more than two nodes with this kind of
"failover", so we don't need to select alternative nodes by
priority.
2017-07-14 12:56:11 +09:00
Ian Barwick
d653888c65
Support pre-10 WAL functions
2017-07-14 10:40:11 +09:00
Ian Barwick
d77e8d4d22
repmgrd: split physical and BDR functionality into separate files
2017-07-13 17:21:29 +09:00
Ian Barwick
2962ffe605
repmgrd: initial BDR monitoring support
2017-07-10 23:58:59 +09:00
Ian Barwick
941ed343f8
repmgrd: additional location check
...
If only one promotion candidate is available, check it is in the
same location as the primary.
2017-07-10 15:20:43 +09:00
Ian Barwick
5fbcf3e476
Remove witness server references
2017-07-10 09:31:31 +09:00
Ian Barwick
9e3d942917
Handle various (unlikely) failure states
2017-07-10 09:00:18 +09:00
Ian Barwick
5bf7098139
repmgrd: consolidate clear_node_info_list() calls
2017-07-09 11:10:49 +09:00
Ian Barwick
2787994a6e
Make repmgrd failover settings configurable
2017-07-07 21:11:22 +09:00
Ian Barwick
35df85e67d
repmgrd: improve handling of "degraded monitoring"
...
In some cases, the monitored upstream may not be available for a while
(e.g. network split), in which case it makes sense to have repmgrd
keep running and trying to reconnect. Previously it would just keel
over and quit.
2017-07-06 17:19:55 +09:00
Ian Barwick
6b82ecbafc
repmgrd: check for visibility of primary location
...
Also support degraded monitoring status
2017-07-06 11:45:04 +09:00
Ian Barwick
ff4cc64a67
repmgrd: refresh upstream node record from upstream itself
2017-07-05 13:23:42 +09:00
Ian Barwick
3c45853b6f
Fixes for cascaded standby failover
2017-07-05 12:43:35 +09:00
Ian Barwick
a31d66f826
repmgr standby follow: add event details
...
Useful to have a confirmation of which node was followed.
2017-07-05 11:36:30 +09:00
Ian Barwick
2f2a983272
Fixes for cascaded standby monitoring
2017-07-05 11:26:09 +09:00
Ian Barwick
617dee6bd6
Add function create_event_record()
...
For logging an event to the event table without generating an external
event notification.
Rename existing create_event_record*() functions to create_event_notification*()
as this describes their function better.
2017-07-05 09:52:22 +09:00
Ian Barwick
d3ec15cd25
Fixes from merge
2017-07-04 23:57:43 +09:00
Ian Barwick
60edb00bb4
Add dummy BDR monitoring handler
2017-07-04 23:35:19 +09:00
Ian Barwick
24c6b2c9f1
repmgrd: initial code for cascaded standby failover
2017-07-04 23:14:05 +09:00
Ian Barwick
e1f4384f7e
repmgrd: refactory primary failover code into separate function
2017-07-04 20:42:22 +09:00
Ian Barwick
f7f49ae85e
repmgrd: handle case where upstream node ID is not defined
...
This shouldn't usually happen, but can't be ruled out entirely.
2017-07-04 18:05:35 +09:00
Ian Barwick
7bd8ce703d
repmgrd: handle local node outage
2017-07-04 13:22:26 +09:00
Ian Barwick
618a2346e1
repmgrd: various fixed, mainly clearing status after a failover event
2017-07-04 11:55:03 +09:00
Ian Barwick
78d45ebf68
Various fixes
...
Add more event logging, and improve comments.
2017-07-03 23:41:34 +09:00
