repmgrd configuration repmgrd is a daemon which runs on each PostgreSQL node, monitoring the local node, and (unless it's the primary node) the upstream server (the primary server or with cascading replication, another standby) which it's connected to. repmgrd can be configured to provide failover capability in case the primary upstream node becomes unreachable, and/or provide monitoring data to the &repmgr; metadatabase. To use repmgrd, its associated function library must be included in postgresql.conf with: shared_preload_libraries = 'repmgr' Changing this setting requires a restart of PostgreSQL; for more details see the PostgreSQL documentation. If using automatic failover, the following repmgrd options *must* be set in repmgr.conf : failover=automatic promote_command='/usr/bin/repmgr standby promote -f /etc/repmgr.conf --log-to-file' follow_command='/usr/bin/repmgr standby follow -f /etc/repmgr.conf --log-to-file --upstream-node-id=%n' Adjust file paths as appropriate; we recomment specifying the full path to the &repmgr; binary. Note that the --log-to-file option will cause output generated by the &repmgr; command, when executed by repmgrd, to be logged to the same destination configured to receive log output for repmgrd. See repmgr.conf.sample for further repmgrd-specific settings. When failover is set to automatic, upon detecting failure of the current primary, repmgrd will execute one of: promote_command (if the current server is to become the new primary) follow_command (if the current server needs to follow another server which has become the new primary) These commands can be any valid shell script which results in one of these two actions happening, but if &repmgr;'s standby follow or standby promote commands are not executed (either directly as shown here, or from a script which performs other actions), the &repmgr; metadata will not be updated and &repmgr; will no longer function reliably. The follow_command should provide the --upstream-node-id=%n option to repmgr standby follow; the %n will be replaced by repmgrd with the ID of the new primary node. If this is not provided, &repmgr; will attempt to determine the new primary by itself, but if the original primary comes back online after the new primary is promoted, there is a risk that repmgr standby follow will result in the node continuing to follow the original primary. repmgrd PostgreSQL service configuration If using automatic failover, currently repmgrd will need to execute repmgr standby follow to restart PostgreSQL on standbys to have them follow a new primary. To ensure this happens smoothly, it's essential to provide the appropriate system/service restart command appropriate to your operating system via service_restart_command in repmgr.conf. If you don't do this, repmgrd will default to using pg_ctl, which can result in unexpected problems, particularly on systemd-based systems. For more details, see . repmgrd monitoring configuration To enable monitoring, set: monitoring_history=yes in repmgr.conf. The default monitoring interval is 2 seconds; this value can be explicitly set using: monitor_interval_secs=<seconds> in repmgr.conf. For more details on monitoring, see . repmgrd starting and stopping If installed from a package, the repmgrd can be started via the operating system's service command, e.g. in systemd using systemctl. See appendix for details of service commands for different distributions. repmgrd can be started manually like this: repmgrd -f /etc/repmgr.conf --pid-file /tmp/repmgrd.pid --daemonize and stopped with kill `cat /tmp/repmgrd.pid`. Adjust paths as appropriate. To apply configuration file changes to a running repmgrd daemon, execute the operating system's service reload command (for manually started instances, execute kill -HUP `cat /tmp/repmgrd.pid`). Note that only a subset of configuration file parameters can be changed on a running repmgrd daemon. repmgrd Debian/Ubuntu and daemon configuration Debian/Ubuntu repmgrd daemon configuration If &repmgr; was installed from Debian/Ubuntu packages, additional configuration is required before repmgrd is started as a daemon. This is done via the file /etc/default/repmgrd, which by default looks like this: # default settings for repmgrd. This file is source by /bin/sh from # /etc/init.d/repmgrd # disable repmgrd by default so it won't get started upon installation # valid values: yes/no REPMGRD_ENABLED=no # configuration file (required) #REPMGRD_CONF="/path/to/repmgr.conf" # additional options #REPMGRD_OPTS="" # user to run repmgrd as #REPMGRD_USER=postgres # repmgrd binary #REPMGRD_BIN=/usr/bin/repmgrd # pid file #REPMGRD_PIDFILE=/var/run/repmgrd.pid Set REPMGRD_ENABLED to yes, and REPMGRD_CONF to the repmgr.conf file you are using. If using systemd, you may need to execute systemctl daemon-reload. Also, if you attempted to start repmgrd using systemctl start repmgrd, you'll need to execute systemctl stop repmgrd. Because that's how systemd rolls. In addition to the &repmgr; configuration settings, parameters in the conninfo string influence how &repmgr; makes a network connection to PostgreSQL. In particular, if another server in the replication cluster is unreachable at network level, system network settings will influence the length of time it takes to determine that the connection is not possible. In particular explicitly setting a parameter for connect_timeout should be considered; the effective minimum value of 2 (seconds) will ensure that a connection failure at network level is reported as soon as possible, otherwise depending on the system settings (e.g. tcp_syn_retries in Linux) a delay of a minute or more is possible. For further details on conninfo network connection parameters, see the PostgreSQL documentation. log rotation repmgrd To ensure the current repmgrd logfile (specified in repmgr.conf with the parameter log_file does not grow indefinitely, configure your system's logrotate to regularly rotate it. Sample configuration to rotate logfiles weekly with retention for up to 52 weeks and rotation forced if a file grows beyond 100Mb: /var/log/postgresql/repmgr-9.6.log { missingok compress rotate 52 maxsize 100M weekly create 0600 postgres postgres }