repmgr/doc/configuration-service-commands.sgml

<sect1 id="configuration-service-commands" xreflabel="service command settings">
  <indexterm>
    <primary>repmgr.conf</primary>
    <secondary>service command settings</secondary>
  </indexterm>
  <indexterm>
    <primary>service command settings</primary>
    <secondary>configuration in repmgr.conf</secondary>
  </indexterm>
  <title>Service command settings</title>

  <para>
    In some circumstances, &repmgr; (and <application>repmgrd</application>) need to
    be able to stop, start or restart PostgreSQL. &repmgr; commands which need to do this
    include <link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>,
    <link linkend="repmgr-standby-switchover"><command>repmgr standby switchover</command></link> and
    <link linkend="repmgr-node-rejoin"><command>repmgr node rejoin</command></link>.
  </para>
  <para>
    By default, &repmgr; will use PostgreSQL's <command>pg_ctl</command> to control the PostgreSQL
    server. However this can lead to various problems, particularly when PostgreSQL has been
    installed from packages, and expecially so if <application>systemd</application> is in use.
  </para>


  <note>
    <para>
      If using <application>systemd</application>, ensure you have <varname>RemoteIPC</varname> set to <literal>off</literal>.
      See the <ulink url="https://wiki.postgresql.org/wiki/Systemd">systemd</ulink>
      entry in the <ulink url="https://wiki.postgresql.org/wiki/Main_Page">PostgreSQL wiki</ulink> for details.
    </para>
  </note>


  <para>
    With this in mind, we recommend to <emphasis>always</emphasis> configure &repmgr; to use the
    available system service commands.
  </para>

  <para>
    To do this, specify the appropriate command for each action
    in <filename>repmgr.conf</filename> using the following configuration
    parameters:
    <programlisting>
    service_start_command
    service_stop_command
    service_restart_command
    service_reload_command</programlisting>
  </para>

  <note>
    <para>
      It's also possible to specify a <varname>service_promote_command</varname>;
      this overrides any value contained in the setting <varname>promote_command</varname>.
      This is intended for systems which provide a package-level promote command,
      such as Debian's <application>pg_ctlcluster</application>.
    </para>
  </note>

  <para>
    To confirm which command &repmgr; will execute for each action, use
    <command>repmgr node service --list --action=...</command>, e.g.:
    <programlisting>
      repmgr -f /etc/repmgr.conf node service --list --action=stop
      repmgr -f /etc/repmgr.conf node service --list --action=start
      repmgr -f /etc/repmgr.conf node service --list --action=restart
      repmgr -f /etc/repmgr.conf node service --list --action=reload</programlisting>
  </para>

  <para>
     These commands will be executed by the system user which &repmgr; runs as (usually <literal>postgres</literal>)
     and will probably require passwordless sudo access to be able to execute the command.
  </para>
  <para>
    For example, using <application>systemd</application> on CentOS 7, the service commands can be
    set as follows:
    <programlisting>
      service_start_command   = 'sudo systemctl start postgresql-9.6'
      service_stop_command    = 'sudo systemctl stop postgresql-9.6'
      service_restart_command = 'sudo systemctl restart postgresql-9.6'
      service_reload_command  = 'sudo systemctl reload postgresql-9.6'</programlisting>
    and <filename>/etc/sudoers</filename> should be set as follows:
    <programlisting>
      Defaults:postgres !requiretty
      postgres ALL = NOPASSWD: /usr/bin/systemctl stop postgresql-9.6, \
        /usr/bin/systemctl start postgresql-9.6, \
        /usr/bin/systemctl restart postgresql-9.6 \
        /usr/bin/systemctl reload postgresql-9.6</programlisting>
  </para>

  <important>
    <indexterm>
      <primary>pg_ctlcluster</primary>
      <secondary>service command settings</secondary>
    </indexterm>
    <para>
      Debian/Ubuntu users: instead of calling <command>sudo systemctl</command> directly, use
      <command>sudo pg_ctlcluster</command>, e.g.:
    <programlisting>
      service_start_command   = 'sudo pg_ctlcluster 9.6 main start'
      service_stop_command    = 'sudo pg_ctlcluster 9.6 main stop'
      service_restart_command = 'sudo pg_ctlcluster 9.6 main restart'
      service_reload_command  = 'sudo pg_ctlcluster 9.6 main reload'</programlisting>
      and set <filename>/etc/sudoers</filename> accordingly.
    </para>
    <para>
      While <command>pg_ctlcluster</command> will work when executed as user <literal>postgres</literal>,
      it's strongly recommended to use <command>sudo pg_ctlcluster</command> on <application>systemd</application>
      systems, to ensure <application>systemd</application> has a correct picture of
      the PostgreSQL application state.
    </para>

  </important>

</sect1>