Ian Barwick
1445d1002c
Clean up log messages
...
Remove legacy trailing new lines.
2017-09-04 10:52:42 +09:00
Ian Barwick
22f5576cc2
Fix typo
2017-09-04 09:41:00 +09:00
Ian Barwick
47a4b49890
Add "repmgr standby follow --upstream-node-id"
...
In an automatic failover situation, after a standby has been promoted
there's a risk the original primary may become available again before
"standby follow" is issued on another standby node, in which case "standby
follow" will reconnect to the original primary.
As the standby's repmgrd will have received a notification from the new
primary, it will know the primary's ID and can therefore explicitly
direct "standby follow" to follow that primary.
2017-09-04 09:11:59 +09:00
Ian Barwick
3aeceab081
"standby follow": add missing sleep() call when --wait specified
2017-09-02 13:11:03 +09:00
Ian Barwick
72e037d55b
SCRIPTS_built also required for 9.4
2017-09-02 12:03:17 +09:00
Ian Barwick
4ba3e67e11
Hacky workaround for hacky workaround in 9.4
...
For some reason 9.4 doesn't install the repmgr/repmgrd binaries
with "SCRIPTS_built". "SCRIPTS" seems to work for both 9.4 and
later versions.
2017-09-02 11:54:07 +09:00
Ian Barwick
ab6702891a
Minor fixes to cascading standby failover.
2017-09-01 13:09:17 +09:00
Ian Barwick
edb74ccef9
Various fixes to "repmgr node rejoin"
2017-09-01 11:30:31 +09:00
Ian Barwick
f9f05158d2
Fix "cluster show --csv" output
2017-09-01 00:14:01 +09:00
Ian Barwick
c7423ebb44
Various minor fixes
2017-08-31 23:54:52 +09:00
Ian Barwick
91941183bc
Use replication user, if set, when checking replication connections
2017-08-31 17:54:49 +09:00
Ian Barwick
1517c06bb1
Document "replication_user" configuration file parameter.
2017-08-31 17:29:09 +09:00
Ian Barwick
04c9779561
Add documentation about passwords and recovery.conf
2017-08-31 15:24:09 +09:00
Ian Barwick
0e0b221507
Add configuration file setting "use_primary_conninfo_password"
...
If, for whatever reason, the upstream server password needs to be set
in "primary_conninfo", enable it to be extracted from $PGPASSWORD.
2017-08-31 14:57:07 +09:00
Ian Barwick
677cd9073a
Document parameter "degraded_monitoring_timeout"
...
Also ensure it can be reloaded.
2017-08-31 14:48:51 +09:00
Ian Barwick
7fecc611a9
Update minimum version check in configure.in
2017-08-31 13:33:45 +09:00
Ian Barwick
ed16c32fe7
Check minimum server version for pg_rewind
2017-08-31 13:30:59 +09:00
Ian Barwick
705b52fde4
Use actual program name rather than "repmgr" when executing remote commands
...
It's possible some distribution packages may assign a different name to the
"repmgr" binary (typically appending a version number), so we shouldn't hard-code
into the command string.
However it's reasonable to assume the "repmgr" binary will have the same name
across a replication cluster so we won't engage in any contortions to account
for possible variations.
See: https://github.com/2ndQuadrant/repmgr/issues/323
2017-08-31 11:04:11 +09:00
Ian Barwick
ae634100a3
"standby switchover": sanity-check remote "repmgr" binary before proceeding
2017-08-31 11:00:14 +09:00
Ian Barwick
8e35a415a9
Refactor extraction of value to use for "primary_conninfo"
...
Also add improved error detection.
Basically in the worst case we want to enable the user to clone a standby
from Barman even if the upstream node is not running/reachable, as long as
the user explicitly provides a string to use for "primary_conninfo".
2017-08-31 09:59:30 +09:00
Ian Barwick
dfb796ca8f
Check config file *before* checking command line parameters
...
Validity of command line parameters may depened on settings in the configuration
file.
2017-08-31 09:55:32 +09:00
Ian Barwick
13f2d46e92
"standby clone": exit with 0 after successful --dry-run
2017-08-30 10:00:48 +09:00
Ian Barwick
8b03859dbe
"standby clone": add early sanity check for external configuration files
...
This still requires an SSH connection, so we need to check early before
the cloning starts, and also emit useful information for --dry-run.
2017-08-29 22:11:16 +09:00
Ian Barwick
16d7282c9d
Update README
2017-08-29 16:32:29 +09:00
Ian Barwick
154c76e5e7
repmgrd: improve cascaded standby failover
...
Check primary is available.
2017-08-29 15:29:17 +09:00
Ian Barwick
6d02415d26
Ensure "log_status_interval" gets reloaded
2017-08-29 15:26:10 +09:00
Ian Barwick
9cf3508979
Log configuration parameters which change following a reload
2017-08-29 13:08:37 +09:00
Ian Barwick
e0888c1f62
repmgrd: handle SIGHUP
2017-08-29 12:55:13 +09:00
Ian Barwick
df827c6518
Update repmgrd documentation
2017-08-29 11:04:30 +09:00
Ian Barwick
0b9c538cb9
Update README1
2017-08-29 08:13:42 +09:00
Ian Barwick
e40a14289d
Update README
2017-08-28 17:33:38 +09:00
Ian Barwick
725bcf3177
Update README
...
Document replication slots.
2017-08-28 17:26:00 +09:00
Ian Barwick
4d5ff146e0
Update README
2017-08-28 17:07:14 +09:00
Ian Barwick
0b7dbb845c
Add warning for --dry-run when not effective
2017-08-28 15:10:57 +09:00
Ian Barwick
b900f9996f
"repmgr standby clone": add --dry-run option
2017-08-28 15:04:50 +09:00
Ian Barwick
e05bab8284
"standby switchover": epxlictly confirm suitability for --pg-rewind
...
If --force-rewind requested.
2017-08-28 14:50:08 +09:00
Ian Barwick
4ba2291cdd
Update README
2017-08-28 12:32:05 +09:00
Ian Barwick
3b28cfa70e
Update "standby switchover" command reference
2017-08-28 11:58:10 +09:00
Ian Barwick
4b2fb7d15b
Update "repmgr primary ..." --help output and command reference
2017-08-28 11:53:41 +09:00
Ian Barwick
d85b066f45
repmgrd cluster show: add warnings with information about discrepancies
2017-08-28 11:19:32 +09:00
Ian Barwick
4a11551c2f
repmgrd: handle local node failure
2017-08-28 10:31:43 +09:00
Ian Barwick
754084c814
Update "repmgr standby --help" output
2017-08-26 10:27:22 +09:00
Ian Barwick
57215a8bd7
Add --help output for "standby clone"
2017-08-25 23:07:17 +09:00
Ian Barwick
c1ed248fb1
Handle "event_notifications" when reloading configuration
2017-08-25 23:07:07 +09:00
Ian Barwick
e280e2670e
Add code to reload configuration file
2017-08-25 22:31:42 +09:00
Ian Barwick
5208655a35
Parse "recovery_min_apply_delay" from recovery.conf
2017-08-25 21:47:14 +09:00
Ian Barwick
5ee1eb6bf7
Convert --recovery-min-apply-delay to configuration file option
...
That way it only needs to be set once, and won't get lost during
follow operations etc.
2017-08-25 21:25:15 +09:00
Ian Barwick
dc172cae20
When performing a follow operation, start/restart server as appropriate
...
Before this we were always forcing a restart, which is technically not
a problem but produces some potentially confusing log entries along the
lines:
pg_ctl: PID file "/path/to/postmaster.pid" does not exist
Is server running?
starting server anyway
2017-08-25 16:50:30 +09:00
Ian Barwick
1ba2a2462c
Update README
2017-08-25 16:48:14 +09:00
Ian Barwick
4921f389b6
Fix spurious warning when executing "repmgr node rejoin"
...
Database connection parameters required for this.
2017-08-25 16:28:25 +09:00
