Ian Barwick
f5bfba4a5a
doc: minor clarifications to Debian package info
2020-01-24 10:46:56 +09:00
Ian Barwick
e60d00543c
doc: update repository links to https
2020-01-24 10:46:52 +09:00
Ian Barwick
be79f1e2c9
doc: note availability of RHEL 8 packages
2020-01-07 09:45:24 +09:00
Renaud Fortier
84d83a383a
Update repmgr.conf.sample
...
Add empty single quotes to promote_command and follow_command
2019-12-16 12:28:12 +09:00
Ian Barwick
f288e7c6b5
repmgrd: fix configuration file reload handling
...
Usually repmgrd requires the parameters "promote_command" and
"follow_command" to be present in the configuration file. These are
not required if "failover=manual", but the configuration sanity check
following receipt of SIGHUP was not checking that.
Addresses issue reported in GitHub #614 .
2019-12-16 11:35:41 +09:00
Ian Barwick
9d2d3296fb
doc: update release notes
2019-12-10 16:48:36 +09:00
Ian Barwick
309f2a7000
standby follow: don't attempt to delete slot if new upstream is same as current
...
An attempt will be made to delete an existing replication slot on the
old upstream node (this is important during e.g. a switchover operation
or when attaching a cascaded standby to a new upstream). However if the
standby is currently attached to the follow target node anyway, the
replication slot should never be deleted.
2019-12-10 15:58:26 +09:00
Ian Barwick
656030b851
doc: add reference to "ssh_options"
...
This is listed in "repmgr.conf.sample" but not the main documentation.
2019-11-25 10:17:45 +09:00
Ian Barwick
b535daed89
doc: link PgBouncer fencing document from main docs
2019-11-21 09:58:01 +09:00
Ian Barwick
cd0ea1688c
doc: document "tablespace_mapping" parameter.
...
This was previously only mentioned in "repmgr.conf.sample".
2019-11-20 16:54:49 +09:00
Ian Barwick
98021f1167
doc: fix minor punctuation typo
2019-11-11 15:54:59 +09:00
Ian Barwick
d963558baf
doc: ensure various repmgr.conf values are quoted appropriately
2019-11-08 11:50:29 +09:00
Ian Barwick
b0bfed0495
doc: update repmgr.conf sample
...
Convert recovery.conf references to generic configuration descriptions,
and fix spacing.
2019-11-08 11:48:44 +09:00
Ian Barwick
017387dfd0
doc: clarify Barman configuation
...
Per confusion noted in GitHub #602 .
2019-11-07 14:29:14 +09:00
Ian Barwick
0bde2fc00c
standby clone: fix typo in log message
2019-10-28 14:09:31 +09:00
Ian Barwick
ff48789ea3
doc: note superuser requirement for "repmgr primary register"
2019-10-25 12:44:49 +09:00
Ian Barwick
87fe68032a
primary register: improve debug log output
2019-10-25 12:44:05 +09:00
Ian Barwick
0112843f1b
doc: note permission requirements for "repmgr standby (promote|switchover)
...
Per issues noted in GitHub #595 .
2019-10-25 11:54:50 +09:00
Ian Barwick
8065a443dd
Clarify usage of log_db_error() function
2019-10-24 10:05:12 +09:00
Ian Barwick
446d7426ba
doc: note which repmgr versions are supported in the compatibility matrix
2019-10-24 09:49:28 +09:00
Ian Barwick
b4da7caa30
doc: update README
...
Link to compatibility matrix, support section.
2019-10-24 09:49:24 +09:00
Ian Barwick
2067c164fc
doc: update README
2019-10-24 09:49:20 +09:00
Ian Barwick
4f0613cba2
Ensure postgresql.auto.conf is created with correct permissions
2019-10-18 16:47:42 +09:00
Ian Barwick
5bf05f7b2d
Tweak "repmgr standby --help" output not to mention recovery.conf
...
Use the more generic "replication configuration" to cover Pg12
and later.
2019-10-18 14:11:39 +09:00
Ian Barwick
6c3b0dff4f
doc: expand section about requesting support
2019-10-18 12:00:47 +09:00
Ian Barwick
676475dc1f
doc: add link to blog entry about Pg12 replication configuration changes
2019-10-18 12:00:43 +09:00
Ian Barwick
39003be5a3
Change version number from 5.0 to 5.0.0
...
Previous initial "major" releases were two-element only (e.g. 4.4);
beginning from repmgr 5 we want to ensure all version numbers have
three elements, for general consistency, including the generation
of package names.
2019-10-15 11:01:03 +09:00
Ian Barwick
c27f134e50
doc: split notes about PostgreSQL 9.3 and 9.4 support into a new subsection
2019-10-15 10:46:14 +09:00
Ian Barwick
5a619244ee
doc: add note about 4.x development policy
2019-10-15 10:42:52 +09:00
Ian Barwick
b5448def7e
doc: add repmgr 5.0 release date
2019-10-15 10:30:34 +09:00
Ian Barwick
af1c889bc3
Bump version to 5.0
2019-10-14 15:10:40 +09:00
Ian Barwick
2304584679
Fix handling of upstream node change check
...
repmgrd has a check to see if the upstream node has unexpectedly
changed, e.g. if the repmgrd service is paused and the PostgreSQL
instance has been pointed to another node.
However this check was relying on the node record on the local node
being up-to-date, which may not be the case immediately after a
failover, when the node is still replaying records updated prior
to the node's own record being updated. In this case it will
mistakenly assume the node is following the original primary
and attempt to restart monitoring, which will fail as the original
primary is no longer available.
To prevent this, we check against the node's record on the upstream
node.
Addresses issue noted in GitHub #587 and #588 .
2019-10-14 12:28:04 +09:00
Ian Barwick
4aaa24a5f8
Update configuration file conversion script
...
Ensure output is quoted.
2019-10-08 10:59:20 +09:00
Ian Barwick
ea29af2e68
Remove mistakenly added file
2019-10-08 10:33:27 +09:00
Ian Barwick
7053ed5b51
doc: update links to Barman documentation
2019-10-08 10:30:41 +09:00
Ian Barwick
a845d7126d
doc: minor updates to "repmgr standby clone" reference
...
- remove references to repmgr 4.0.4 (present because feature
was added in a minor release, but that's a long time ago)
- note configuration is appended to postgresql.auto.conf
2019-10-08 10:21:26 +09:00
Ian Barwick
1c317059cd
doc: clarify use of --recovery-conf-only
2019-10-08 10:03:44 +09:00
Ian Barwick
dcf5bfb649
doc: fix minor formatting error
2019-10-08 09:48:04 +09:00
Ian Barwick
dbd3d34c89
doc; update repmgr.conf.sample
...
Note new PostgreSQL-style parsing and add link to documentation.
2019-10-07 18:28:16 +09:00
Ian Barwick
f3c3320a9c
doc: update examples in quickstart guide
2019-10-07 18:27:38 +09:00
Ian Barwick
cfc5bde219
doc: update repmgr.conf samples in Barman section
...
From repmgr 5.x we really need to quote all the things.
2019-10-07 12:05:26 +09:00
Ian Barwick
ea57269569
doc: improve instructions for cloning from Barman
2019-10-07 11:56:40 +09:00
Ian Barwick
b885337abc
Minor code formatting fix
2019-10-07 10:48:35 +09:00
Ian Barwick
e8b5b92893
doc: improve Barman standby clone example
2019-10-03 15:52:32 +09:00
Ian Barwick
02bdcf657f
doc: add link to FAQ section about 3rd party package compatibilty
2019-10-03 15:23:57 +09:00
Ian Barwick
405f70f769
doc: clarify barman-cli package usage
...
As of Barman 2.8, the barman-cli package has been merged with the core
Barman code, so is only requires an explicit mention for Barman 2.0 ~ 2.7.
2019-10-03 14:35:45 +09:00
Ian Barwick
577ca35de5
doc: remove reference to Barman 1.x.
...
Barman 1.x is very outdated and should no longer be used anyway.
2019-10-03 14:25:17 +09:00
Martín Marqués
a557f2d69e
Typo in the documentation of the repmgrd configuration
...
Signed-off-by: Martín Marqués <martin.marques@2ndquadrant.com >
2019-10-01 09:44:30 -03:00
Ian Barwick
1196821457
doc: update FAQ
...
Note pg_monitor default role as well, and link to relevant section
in the PostgreSQL documentation.
2019-10-01 10:29:44 +09:00
Ian Barwick
c1d464f3da
doc: add FAQ entry about 3rd-party PostgreSQL packages
2019-10-01 10:07:25 +09:00
