Catch various corner cases when restarting a PostgreSQL instance

4.0.3

FAQ.md

@@ -1,7 +1,9 @@
 FAQ - Frequently Asked Questions about repmgr
 =============================================
 
-The repmgr 4 FAQ is located here: [repmgr FAQ (Frequently Asked Questions)](https://repmgr.org/docs/4.0/appendix-faq.html "repmgr FAQ")
+The repmgr 4 FAQ is located here:
+
+    https://repmgr.org/docs/appendix-faq.html
 
 The repmgr 3.x FAQ can be found here:
 

HISTORY

@@ -1,109 +1,4 @@
-4.1.1   2018-09-05
-        logging: explicitly log the text of failed queries as ERRORs to
-          assist logfile analysis; GitHub #498
-        repmgr: truncate version string, if necessary; GitHub #490 (Ian)
-        repmgr: improve messages emitted during "standby promote" (Ian)
-        repmgr: "standby clone" - don't copy external config files in --dry-run
-          mode; GitHub #491 (Ian)
-        repmgr: add "cluster_cleanup" event; GitHub #492 (Ian)
-        repmgr: (standby switchover) improve detection of free walsenders;
-          GitHub #495 (Ian)
-        repmgr: (node rejoin) improve replication slot handling; GitHub #499 (Ian)
-        repmgrd: ensure that sending SIGHUP always results in the log file
-          being reopened; GitHub #485 (Ian)
-        repmgrd: report version number *after* logger initialisation; GitHub #487 (Ian)
-        repmgrd: fix startup on witness node when local data is stale; GitHub #488/#489 (Ian)
-        repmgrd: improve cascaded standby failover handling; GitHub #480 (Ian)
-        repmgrd: improve reconnection handling (Ian)
-
-4.1.0   2018-07-31
-        repmgr: change default log_level to INFO, add documentation; GitHub #470 (Ian)
-        repmgr: add "--missing-slots" check to "repmgr node check" (Ian)
-        repmgr: improve command line error handling; GitHub #464 (Ian)
-        repmgr: fix "standby register --wait-sync" when no timeout provided (Ian)
-        repmgr: "cluster show" returns non-zero value if an issue encountered;
-          GitHub #456 (Ian)
-        repmgr: "node check" and "node status" returns non-zero value if an issue
-           encountered (Ian)
-        repmgr: add CSV output mode to "cluster event"; GitHub #471 (Ian)
-        repmgr: add -q/--quiet option to suppress non-error output; GitHub #468 (Ian)
-        repmgr: "node status" returns non-zero value if an issue encountered (Ian)
-        repmgr: enable "recovery_min_apply_delay" to be 0; GitHub #448 (Ian)
-        repmgr: "cluster cleanup" - add missing help options; GitHub #461/#462 (gclough)
-        repmgr: ensure witness node follows new primary after switchover;
-          GitHub #453 (Ian)
-        repmgr: fix witness node handling in "node check"/"node status";
-          GitHub #451 (Ian)
-        repmgr: fix "primary_slot_name" when using "standby clone" with --recovery-conf-only;
-          GitHub #474 (Ian)
-        repmgr: don't perform a switchover if an exclusive backup is running;
-          GitHub #476 (Martín)
-        repmgr: enable "witness unregister" to be run on any node; GitHub #472 (Ian)
-        repmgrd: create a PID file by default; GitHub #457 (Ian)
-        repmgrd: daemonize process by default; GitHub #458 (Ian)
-
-4.0.6   2018-06-14
-        repmgr: (witness register) prevent registration of a witness server with the
-          same name as an existing node (Ian)
-        repmgr: (standby follow) check node has actually connected to new primary
-          before reporting success; GitHub #444 (Ian)
-        repmgr: (standby clone) improve handling of external configuration file copying,
-          including consideration in --dry-run check; GitHub #443 (Ian)
-        repmgr: (standby clone) don't require presence of "user" parameter in
-          conninfo string; GitHub #437 (Ian)
-        repmgr: (standby clone) improve documentation of --recovery-conf-only
-          mode; GitHub #438 (Ian)
-        repmgr: (node rejoin) fix bug when parsing --config-files parameter;
-          GitHub #442 (Ian)
-        repmgr: when using --dry-run, force log level to INFO to ensure output
-          will always be displayed; GitHub #441 (Ian)
-        repmgr: (cluster matrix/crosscheck) return non-zero exit code if node
-           connection issues detected; GitHub #447 (Ian)
-        repmgrd: ensure local node is counted as quorum member; GitHub #439 (Ian)
-
-4.0.5   2018-05-02
-        repmgr: poll demoted primary after restart as a standby during a
-          switchover operation; GitHub #408 (Ian)
-        repmgr: add configuration parameter "config_directory"; GitHub #424 (Ian)
-        repmgr: add "dbname=replication" to all replication connection strings;
-          GitHub #421 (Ian)
-        repmgr: add sanity check if --upstream-node-id not supplied when executing
-          "standby register"; GitHub #395 (Ian)
-        repmgr: enable provision of "archive_cleanup_command" in recovery.conf;
-          GitHub #416 (Ian)
-        repmgr: actively check for node to rejoin cluster; GitHub #415 (Ian)
-        repmgr: enable pg_rewind to be used with PostgreSQL 9.3/9.4; GitHub #413 (Ian)
-        repmgr: fix minimum accepted value for "degraded_monitoring_timeout";
-          GitHub #411 (Ian)
-        repmgr: fix superuser password handling; GitHub #400 (Ian)
-        repmgr: fix parsing of "archive_ready_critical" configuration file
-          parameter; GitHub #426 (Ian)
-        repmgr: fix display of conninfo parsing error messages (Ian)
-        repmgr: fix "repmgr cluster crosscheck" output; GitHub #389 (Ian)
-        repmgrd: prevent standby connection handle from going stale (Ian)
-        repmgrd: fix memory leaks in witness code; GitHub #402 (AndrzejNowicki, Martín)
-        repmgrd: handle "pg_ctl promote" timeout; GitHub #425 (Ian)
-        repmgrd: handle failover situation with only two nodes in the primary
-          location, and at least one node in another location; GitHub #407 (Ian)
-        repmgrd: set "connect_timeout=2" when pinging a server (Ian)
-
-4.0.4   2018-03-09
-        repmgr: add "standby clone --recovery-conf-only" option; GitHub #382 (Ian)
-        repmgr: make "standby promote" timeout values configurable; GitHub #387 (Ian)
-        repmgr: improve replication slot warnings generated by "node status";
-          GitHub #385 (Ian)
-        repmgr: remove restriction on replication slots when cloning from
-          a Barman server; GitHub #379 (Ian)
-        repmgr: ensure "node rejoin" honours "--dry-run" option; GitHub #383 (Ian)
-        repmgr: fix --superuser handling when cloning a standby; GitHub #380 (Ian)
-        repmgr: update various help options; GitHub #391, #392 (hasegeli)
-        repmgrd: add event "repmgrd_shutdown"; GitHub #393 (Ian)
-        repmgrd: improve detection of status change from primary to standby (Ian)
-        repmgrd: improve log output in various situations (Ian)
-        repmgrd: improve reconnection to the local node after a failover (Ian)
-        repmgrd: ensure witness server connects to new primary after a failover (Ian)
-
-4.0.3   2018-02-15
+4.0.3   2018-02-
         repmgr: improve switchover handling when "pg_ctl" used to control the
           server and logging output is not explicitly redirected (Ian)
         repmgr: improve switchover log messages and exit code when old primary could
@@ -122,7 +17,6 @@
         repmgr: fix upstream node display in "repmgr node status"; GitHub #363 (fanf2)
         repmgr: improve/clarify documentation and update --help output for
           "primary unregister"; GitHub #373 (Ian)
-        repmgr: allow replication slots when Barman is configured; GitHub #379 (Ian)
         repmgr: fix parsing of "pg_basebackup_options"; GitHub #376 (Ian)
         repmgr: ensure "pg_subtrans" directory is created when cloning a standby in
           Barman mode (Ian)

Makefile.in

@@ -11,10 +11,7 @@ EXTENSION = repmgr
 
 DATA = \
   repmgr--unpackaged--4.0.sql \
-  repmgr--4.0.sql \
-  repmgr--4.0--4.1.sql \
-  repmgr--4.1.sql
-
+  repmgr--4.0.sql
 
 REGRESS = repmgr_extension
 

TODO.md

@@ -1,20 +0,0 @@
-TODO
-====
-
-This file contains a list of improvements which are desireable and/or have
-been requested, and which we aim to address/implement when time and resources
-permit.
-
-It is *not* a roadmap and there's no guarantee of any item being implemented
-within any given timeframe.
-
-
-Enable suspension of repmgrd failover
--------------------------------------
-
-When performing maintenance, e.g. a switchover, it's necessary to stop all
-repmgrd nodes to prevent unintended failover; this is obviously inconvenient.
-We'll need to implement some way of notifying each repmgrd to suspend automatic
-failover until further notice.
-
-Requested in GitHub #410 ( https://github.com/2ndQuadrant/repmgr/issues/410 )

configfile.c

@@ -28,8 +28,10 @@ char		config_file_path[MAXPGPATH] = "";
 static bool config_file_provided = false;
 bool		config_file_found = false;
 
-static void parse_config(t_configuration_options *options, bool terse);
 static void _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *warning_list);
+static bool parse_bool(const char *s,
+		   const char *config_item,
+		   ItemList *error_list);
 
 static void _parse_line(char *buf, char *name, char *value);
 static void parse_event_notifications_list(t_configuration_options *options, const char *arg);
@@ -239,7 +241,7 @@ end_search:
 }
 
 
-static void
+void
 parse_config(t_configuration_options *options, bool terse)
 {
 	/* Collate configuration file errors here for friendlier reporting */
@@ -286,7 +288,6 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 	memset(options->node_name, 0, sizeof(options->node_name));
 	memset(options->conninfo, 0, sizeof(options->conninfo));
 	memset(options->data_directory, 0, sizeof(options->data_directory));
-	memset(options->config_directory, 0, sizeof(options->data_directory));
 	memset(options->pg_bindir, 0, sizeof(options->pg_bindir));
 	options->replication_type = REPLICATION_TYPE_PHYSICAL;
 
@@ -302,7 +303,7 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 	options->log_status_interval = DEFAULT_LOG_STATUS_INTERVAL;
 
 	/*-----------------------
-	 * standby clone settings
+	 * standby action settings
 	 *------------------------
 	 */
 	options->use_replication_slots = false;
@@ -313,30 +314,9 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 	options->tablespace_mapping.tail = NULL;
 	memset(options->recovery_min_apply_delay, 0, sizeof(options->recovery_min_apply_delay));
 	options->recovery_min_apply_delay_provided = false;
-	memset(options->archive_cleanup_command, 0, sizeof(options->archive_cleanup_command));
 	options->use_primary_conninfo_password = false;
 	memset(options->passfile, 0, sizeof(options->passfile));
 
-	/*-------------------------
-	 * standby promote settings
-	 *-------------------------
-	 */
-	options->promote_check_timeout = DEFAULT_PROMOTE_CHECK_TIMEOUT;
-	options->promote_check_interval = DEFAULT_PROMOTE_CHECK_INTERVAL;
-
-	/*------------------------
-	 * standby follow settings
-	 *------------------------
-	 */
-	options->primary_follow_timeout = DEFAULT_PRIMARY_FOLLOW_TIMEOUT;
-	options->standby_follow_timeout = DEFAULT_STANDBY_FOLLOW_TIMEOUT;
-
-	/*------------------------
-	 * standby switchover settings
-	 *------------------------
-	 */
-	options->standby_reconnect_timeout = DEFAULT_STANDBY_RECONNECT_TIMEOUT;
-
 	/*-----------------
 	 * repmgrd settings
 	 *-----------------
@@ -356,8 +336,7 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 	options->degraded_monitoring_timeout = -1;
 	options->async_query_timeout = DEFAULT_ASYNC_QUERY_TIMEOUT;
 	options->primary_notification_timeout = DEFAULT_PRIMARY_NOTIFICATION_TIMEOUT;
-	options->repmgrd_standby_startup_timeout = -1; /* defaults to "standby_reconnect_timeout" if not set */
-	memset(options->repmgrd_pid_file, 0, sizeof(options->repmgrd_pid_file));
+	options->primary_follow_timeout = DEFAULT_PRIMARY_FOLLOW_TIMEOUT;
 
 	/*-------------
 	 * witness settings
@@ -476,9 +455,6 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 			strncpy(options->conninfo, value, MAXLEN);
 		else if (strcmp(name, "data_directory") == 0)
 			strncpy(options->data_directory, value, MAXPGPATH);
-		else if (strcmp(name, "config_directory") == 0)
-			strncpy(options->config_directory, value, MAXPGPATH);
-
 		else if (strcmp(name, "replication_user") == 0)
 		{
 			if (strlen(value) < NAMEDATALEN)
@@ -524,38 +500,15 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 			parse_time_unit_parameter(name, value, options->recovery_min_apply_delay, error_list);
 			options->recovery_min_apply_delay_provided = true;
 		}
-		else if (strcmp(name, "archive_cleanup_command") == 0)
-			strncpy(options->archive_cleanup_command, value, MAXLEN);
 		else if (strcmp(name, "use_primary_conninfo_password") == 0)
 			options->use_primary_conninfo_password = parse_bool(value, name, error_list);
 		else if (strcmp(name, "passfile") == 0)
 			strncpy(options->passfile, value, sizeof(options->passfile));
 
-		/* standby promote settings */
-		else if (strcmp(name, "promote_check_timeout") == 0)
-			options->promote_check_timeout = repmgr_atoi(value, name, error_list, 1);
-
-		else if (strcmp(name, "promote_check_interval") == 0)
-			options->promote_check_interval = repmgr_atoi(value, name, error_list, 1);
-
-		/* standby follow settings */
-		else if (strcmp(name, "primary_follow_timeout") == 0)
-			options->primary_follow_timeout = repmgr_atoi(value, name, error_list, 0);
-		else if (strcmp(name, "standby_follow_timeout") == 0)
-			options->standby_follow_timeout = repmgr_atoi(value, name, error_list, 0);
-
-		/* standby switchover settings */
-		else if (strcmp(name, "standby_reconnect_timeout") == 0)
-			options->standby_reconnect_timeout = repmgr_atoi(value, name, error_list, 0);
-
-		/* node rejoin settings */
-		else if (strcmp(name, "node_rejoin_timeout") == 0)
-			options->node_rejoin_timeout = repmgr_atoi(value, name, error_list, 0);
-
 		/* node check settings */
 		else if (strcmp(name, "archive_ready_warning") == 0)
 			options->archive_ready_warning = repmgr_atoi(value, name, error_list, 1);
-		else if (strcmp(name, "archive_ready_critical") == 0)
+		else if (strcmp(name, "archive_ready_critcial") == 0)
 			options->archive_ready_critical = repmgr_atoi(value, name, error_list, 1);
 		else if (strcmp(name, "replication_lag_warning") == 0)
 			options->replication_lag_warning = repmgr_atoi(value, name, error_list, 1);
@@ -596,15 +549,13 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 		else if (strcmp(name, "monitoring_history") == 0)
 			options->monitoring_history = parse_bool(value, name, error_list);
 		else if (strcmp(name, "degraded_monitoring_timeout") == 0)
-			options->degraded_monitoring_timeout = repmgr_atoi(value, name, error_list, -1);
+			options->degraded_monitoring_timeout = repmgr_atoi(value, name, error_list, 1);
 		else if (strcmp(name, "async_query_timeout") == 0)
 			options->async_query_timeout = repmgr_atoi(value, name, error_list, 0);
 		else if (strcmp(name, "primary_notification_timeout") == 0)
 			options->primary_notification_timeout = repmgr_atoi(value, name, error_list, 0);
-		else if (strcmp(name, "repmgrd_standby_startup_timeout") == 0)
-			options->repmgrd_standby_startup_timeout = repmgr_atoi(value, name, error_list, 0);
-		else if (strcmp(name, "repmgrd_pid_file") == 0)
-			strncpy(options->repmgrd_pid_file, value, MAXPGPATH);
+		else if (strcmp(name, "primary_follow_timeout") == 0)
+			options->primary_follow_timeout = repmgr_atoi(value, name, error_list, 0);
 
 		/* witness settings */
 		else if (strcmp(name, "witness_sync_interval") == 0)
@@ -786,17 +737,6 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 		PQconninfoFree(conninfo_options);
 	}
 
-	/* set values for parameters which default to other parameters */
-
-	/*
-	 * From 4.1, "repmgrd_standby_startup_timeout" replaces "standby_reconnect_timeout"
-	 * in repmgrd; fall back to "standby_reconnect_timeout" if no value explicitly provided
-	 */
-	if (options->repmgrd_standby_startup_timeout == -1)
-	{
-		options->repmgrd_standby_startup_timeout = options->standby_reconnect_timeout;
-	}
-
 	/* add warning about changed "barman_" parameter meanings */
 	if ((options->barman_host[0] == '\0' && options->barman_server[0] != '\0') ||
 		(options->barman_host[0] != '\0' && options->barman_server[0] == '\0'))
@@ -821,12 +761,6 @@ _parse_config(t_configuration_options *options, ItemList *error_list, ItemList *
 		item_list_append(error_list,
 						 _("\replication_lag_critical\" must be greater than  \"replication_lag_warning\""));
 	}
-
-	if (options->standby_reconnect_timeout < options->node_rejoin_timeout)
-	{
-		item_list_append(error_list,
-						 _("\"standby_reconnect_timeout\" must be equal to or greater than \"node_rejoin_timeout\""));
-	}
 }
 
 
@@ -991,11 +925,12 @@ parse_time_unit_parameter(const char *name, const char *value, char *dest, ItemL
 	char	   *ptr = NULL;
 	int			targ = strtol(value, &ptr, 10);
 
-	if (targ < 0)
+	if (targ < 1)
 	{
 		if (errors != NULL)
 		{
-			item_list_append_format(errors,
+			item_list_append_format(
+									errors,
 									_("invalid value provided for \"%s\""),
 									name);
 		}
@@ -1049,16 +984,13 @@ parse_time_unit_parameter(const char *name, const char *value, char *dest, ItemL
  * - promote_delay
  * - reconnect_attempts
  * - reconnect_interval
- * - repmgrd_standby_startup_timeout
  * - retry_promote_interval_secs
  *
- * non-changeable options (repmgrd references these from the "repmgr.nodes"
- * table, not the configuration file)
+ * non-changeable options
  *
  * - node_id
  * - node_name
  * - data_directory
- * - location
  * - priority
  * - replication_type
  *
@@ -1067,7 +999,7 @@ parse_time_unit_parameter(const char *name, const char *value, char *dest, ItemL
 
  */
 bool
-reload_config(t_configuration_options *orig_options, t_server_type server_type)
+reload_config(t_configuration_options *orig_options)
 {
 	PGconn	   *conn;
 	t_configuration_options new_options = T_CONFIGURATION_OPTIONS_INITIALIZER;
@@ -1077,50 +1009,17 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 	static ItemList config_errors = {NULL, NULL};
 	static ItemList config_warnings = {NULL, NULL};
 
-	PQExpBufferData errors;
-
 	log_info(_("reloading configuration file"));
 
 	_parse_config(&new_options, &config_errors, &config_warnings);
 
-
-	if (server_type == PRIMARY || server_type == STANDBY)
-	{
-		if (new_options.promote_command[0] == '\0')
-		{
-			item_list_append(&config_errors, _("\"promote_command\": required parameter was not found"));
-		}
-
-		if (new_options.follow_command[0] == '\0')
-		{
-			item_list_append(&config_errors, _("\"follow_command\": required parameter was not found"));
-		}
-	}
-
 	if (config_errors.head != NULL)
 	{
-		ItemListCell *cell = NULL;
-
+		/* XXX dump errors to log */
 		log_warning(_("unable to parse new configuration, retaining current configuration"));
-
-		initPQExpBuffer(&errors);
-
-		appendPQExpBuffer(&errors,
-						  "following errors were detected:\n");
-
-		for (cell = config_errors.head; cell; cell = cell->next)
-		{
-			appendPQExpBuffer(&errors,
-							  "  %s\n", cell->string);
-		}
-
-		log_detail("%s", errors.data);
-		termPQExpBuffer(&errors);
 		return false;
 	}
 
-
-
 	/* The following options cannot be changed */
 
 	if (new_options.node_id != orig_options->node_id)
@@ -1129,7 +1028,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 		return false;
 	}
 
-	if (strncmp(new_options.node_name, orig_options->node_name, MAXLEN) != 0)
+	if (strcmp(new_options.node_name, orig_options->node_name) != 0)
 	{
 		log_warning(_("\"node_name\" cannot be changed, keeping current configuration"));
 		return false;
@@ -1173,7 +1072,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 	}
 
 	/* conninfo */
-	if (strncmp(orig_options->conninfo, new_options.conninfo, MAXLEN) != 0)
+	if (strcmp(orig_options->conninfo, new_options.conninfo) != 0)
 	{
 		/* Test conninfo string works */
 		conn = establish_db_connection(new_options.conninfo, false);
@@ -1200,7 +1099,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 	}
 
 	/* event_notification_command */
-	if (strncmp(orig_options->event_notification_command, new_options.event_notification_command, MAXLEN) != 0)
+	if (strcmp(orig_options->event_notification_command, new_options.event_notification_command) != 0)
 	{
 		strncpy(orig_options->event_notification_command, new_options.event_notification_command, MAXLEN);
 		log_info(_("\"event_notification_command\" is now \"%s\""), new_options.event_notification_command);
@@ -1209,7 +1108,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 	}
 
 	/* event_notifications */
-	if (strncmp(orig_options->event_notifications_orig, new_options.event_notifications_orig, MAXLEN) != 0)
+	if (strcmp(orig_options->event_notifications_orig, new_options.event_notifications_orig) != 0)
 	{
 		strncpy(orig_options->event_notifications_orig, new_options.event_notifications_orig, MAXLEN);
 		log_info(_("\"event_notifications\" is now \"%s\""), new_options.event_notifications_orig);
@@ -1229,7 +1128,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 	}
 
 	/* follow_command */
-	if (strncmp(orig_options->follow_command, new_options.follow_command, MAXLEN) != 0)
+	if (strcmp(orig_options->follow_command, new_options.follow_command) != 0)
 	{
 		strncpy(orig_options->follow_command, new_options.follow_command, MAXLEN);
 		log_info(_("\"follow_command\" is now \"%s\""), new_options.follow_command);
@@ -1266,7 +1165,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 
 
 	/* promote_command */
-	if (strncmp(orig_options->promote_command, new_options.promote_command, MAXLEN) != 0)
+	if (strcmp(orig_options->promote_command, new_options.promote_command) != 0)
 	{
 		strncpy(orig_options->promote_command, new_options.promote_command, MAXLEN);
 		log_info(_("\"promote_command\" is now \"%s\""), new_options.promote_command);
@@ -1274,7 +1173,7 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 		config_changed = true;
 	}
 
-	/* promote_delay (for testing use only; not documented */
+	/* promote_delay */
 	if (orig_options->promote_delay != new_options.promote_delay)
 	{
 		orig_options->promote_delay = new_options.promote_delay;
@@ -1301,32 +1200,23 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 		config_changed = true;
 	}
 
-	/* repmgrd_standby_startup_timeout */
-	if (orig_options->repmgrd_standby_startup_timeout != new_options.repmgrd_standby_startup_timeout)
-	{
-		orig_options->repmgrd_standby_startup_timeout = new_options.repmgrd_standby_startup_timeout;
-		log_info(_("\"repmgrd_standby_startup_timeout\" is now \"%i\""), new_options.repmgrd_standby_startup_timeout);
-
-		config_changed = true;
-	}
-
 	/*
 	 * Handle changes to logging configuration
 	 */
 
 	/* log_facility */
-	if (strncmp(orig_options->log_facility, new_options.log_facility, MAXLEN) != 0)
+	if (strcmp(orig_options->log_facility, new_options.log_facility) != 0)
 	{
-		strncpy(orig_options->log_facility, new_options.log_facility, MAXLEN);
+		strcpy(orig_options->log_facility, new_options.log_facility);
 		log_info(_("\"log_facility\" is now \"%s\""), new_options.log_facility);
 
 		log_config_changed = true;
 	}
 
 	/* log_file */
-	if (strncmp(orig_options->log_file, new_options.log_file, MAXLEN) != 0)
+	if (strcmp(orig_options->log_file, new_options.log_file) != 0)
 	{
-		strncpy(orig_options->log_file, new_options.log_file, MAXLEN);
+		strcpy(orig_options->log_file, new_options.log_file);
 		log_info(_("\"log_file\" is now \"%s\""), new_options.log_file);
 
 		log_config_changed = true;
@@ -1334,9 +1224,9 @@ reload_config(t_configuration_options *orig_options, t_server_type server_type)
 
 
 	/* log_level */
-	if (strncmp(orig_options->log_level, new_options.log_level, MAXLEN) != 0)
+	if (strcmp(orig_options->log_level, new_options.log_level) != 0)
 	{
-		strncpy(orig_options->log_level, new_options.log_level, MAXLEN);
+		strcpy(orig_options->log_level, new_options.log_level);
 		log_info(_("\"log_level\" is now \"%s\""), new_options.log_level);
 
 		log_config_changed = true;
@@ -1402,23 +1292,13 @@ exit_with_config_file_errors(ItemList *config_errors, ItemList *config_warnings,
 
 
 void
-exit_with_cli_errors(ItemList *error_list, const char *repmgr_command)
+exit_with_cli_errors(ItemList *error_list)
 {
 	fprintf(stderr, _("The following command line errors were encountered:\n"));
 
 	print_item_list(error_list);
 
-	if (repmgr_command != NULL)
-	{
-		fprintf(stderr, _("Try \"%s --help\" or \"%s %s --help\" for more information.\n"),
-				progname(),
-				progname(),
-				repmgr_command);
-	}
-	else
-	{
-		fprintf(stderr, _("Try \"%s --help\" for more information.\n"), progname());
-	}
+	fprintf(stderr, _("Try \"%s --help\" for more information.\n"), progname());
 
 	exit(ERR_BAD_CONFIG);
 }
@@ -1523,7 +1403,7 @@ repmgr_atoi(const char *value, const char *config_item, ItemList *error_list, in
  *
  *   https://www.postgresql.org/docs/current/static/config-setting.html
  */
-bool
+static bool
 parse_bool(const char *s, const char *config_item, ItemList *error_list)
 {
 	PQExpBufferData errors;
@@ -1809,9 +1689,6 @@ free_parsed_argv(char ***argv_array)
 }
 
 
-
-
-
 bool
 parse_pg_basebackup_options(const char *pg_basebackup_options, t_basebackup_options *backup_options, int server_version_num, ItemList *error_list)
 {

configfile.h

@@ -73,7 +73,6 @@ typedef struct
 	char		conninfo[MAXLEN];
 	char		replication_user[NAMEDATALEN];
 	char		data_directory[MAXPGPATH];
-	char		config_directory[MAXPGPATH];
 	char		pg_bindir[MAXPGPATH];
 	int			replication_type;
 
@@ -83,31 +82,16 @@ typedef struct
 	char		log_file[MAXLEN];
 	int			log_status_interval;
 
-	/* standby clone settings */
+	/* standby action settings */
 	bool		use_replication_slots;
 	char		pg_basebackup_options[MAXLEN];
 	char		restore_command[MAXLEN];
 	TablespaceList tablespace_mapping;
 	char		recovery_min_apply_delay[MAXLEN];
 	bool		recovery_min_apply_delay_provided;
-	char		archive_cleanup_command[MAXLEN];
 	bool		use_primary_conninfo_password;
 	char		passfile[MAXPGPATH];
 
-	/* standby promote settings */
-	int			promote_check_timeout;
-	int			promote_check_interval;
-
-	/* standby follow settings */
-	int			primary_follow_timeout;
-	int			standby_follow_timeout;
-
-	/* standby switchover settings */
-	int			standby_reconnect_timeout;
-
-	/* node rejoin settings */
-	int			node_rejoin_timeout;
-
 	/* node check settings */
 	int			archive_ready_warning;
 	int			archive_ready_critical;
@@ -130,8 +114,7 @@ typedef struct
 	int			degraded_monitoring_timeout;
 	int			async_query_timeout;
 	int			primary_notification_timeout;
-	int			repmgrd_standby_startup_timeout;
-	char		repmgrd_pid_file[MAXPGPATH];
+	int			primary_follow_timeout;
 
 	/* BDR settings */
 	bool		bdr_local_monitoring_only;
@@ -170,20 +153,11 @@ typedef struct
 
 #define T_CONFIGURATION_OPTIONS_INITIALIZER { \
 		/* node information */ \
-		UNKNOWN_NODE_ID, "", "", "", "", "", "", REPLICATION_TYPE_PHYSICAL,	\
+		UNKNOWN_NODE_ID, "", "", "", "", "", REPLICATION_TYPE_PHYSICAL,	\
 		/* log settings */ \
 		"", "", "", DEFAULT_LOG_STATUS_INTERVAL,	\
-		/* standby clone settings */ \
-		false, "", "", { NULL, NULL }, "", false, "", false, "", \
-		/* standby promote settings */ \
-		DEFAULT_PROMOTE_CHECK_TIMEOUT, DEFAULT_PROMOTE_CHECK_INTERVAL, \
-		/* standby follow settings */ \
-		DEFAULT_PRIMARY_FOLLOW_TIMEOUT,	\
-		DEFAULT_STANDBY_FOLLOW_TIMEOUT,	\
-		/* standby switchover settings */ \
-		DEFAULT_STANDBY_RECONNECT_TIMEOUT, \
-		/* node rejoin settings */ \
-		DEFAULT_NODE_REJOIN_TIMEOUT, \
+		/* standby action settings */ \
+		false, "", "", { NULL, NULL }, "", false, false, "",	\
 		/* node check settings */ \
 		DEFAULT_ARCHIVE_READY_WARNING, DEFAULT_ARCHIVE_READY_CRITICAL, \
 		DEFAULT_REPLICATION_LAG_WARNING, DEFAULT_REPLICATION_LAG_CRITICAL, \
@@ -197,7 +171,7 @@ typedef struct
         false, -1, \
 		DEFAULT_ASYNC_QUERY_TIMEOUT, \
 		DEFAULT_PRIMARY_NOTIFICATION_TIMEOUT,	\
-		-1, "", \
+		DEFAULT_PRIMARY_FOLLOW_TIMEOUT,	\
 		/* BDR settings */ \
 		false, DEFAULT_BDR_RECOVERY_TIMEOUT, \
 		/* service settings */ \
@@ -273,20 +247,16 @@ typedef struct
 	"", "", "", "" \
 }
 
-#include "dbutils.h"
 
 void		set_progname(const char *argv0);
 const char *progname(void);
 
 void		load_config(const char *config_file, bool verbose, bool terse, t_configuration_options *options, char *argv0);
-bool		reload_config(t_configuration_options *orig_options, t_server_type server_type);
+void		parse_config(t_configuration_options *options, bool terse);
+bool		reload_config(t_configuration_options *orig_options);
 
 bool		parse_recovery_conf(const char *data_dir, t_recovery_conf *conf);
 
-bool		parse_bool(const char *s,
-					   const char *config_item,
-					   ItemList *error_list);
-
 int repmgr_atoi(const char *s,
 			const char *config_item,
 			ItemList *error_list,
@@ -302,7 +272,7 @@ void free_parsed_argv(char ***argv_array);
 
 
 /* called by repmgr-client and repmgrd */
-void		exit_with_cli_errors(ItemList *error_list, const char *repmgr_command);
+void		exit_with_cli_errors(ItemList *error_list);
 void		print_item_list(ItemList *item_list);
 
 #endif							/* _REPMGR_CONFIGFILE_H_ */

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for repmgr 4.1.2.
+# Generated by GNU Autoconf 2.69 for repmgr 4.0.3.
 #
 # Report bugs to <pgsql-bugs@postgresql.org>.
 #
@@ -582,8 +582,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='repmgr'
 PACKAGE_TARNAME='repmgr'
-PACKAGE_VERSION='4.1.2'
-PACKAGE_STRING='repmgr 4.1.2'
+PACKAGE_VERSION='4.0.3'
+PACKAGE_STRING='repmgr 4.0.3'
 PACKAGE_BUGREPORT='pgsql-bugs@postgresql.org'
 PACKAGE_URL='https://2ndquadrant.com/en/resources/repmgr/'
 
@@ -1178,7 +1178,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures repmgr 4.1.2 to adapt to many kinds of systems.
+\`configure' configures repmgr 4.0.3 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1239,7 +1239,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of repmgr 4.1.2:";;
+     short | recursive ) echo "Configuration of repmgr 4.0.3:";;
    esac
   cat <<\_ACEOF
 
@@ -1313,7 +1313,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-repmgr configure 4.1.2
+repmgr configure 4.0.3
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1332,7 +1332,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by repmgr $as_me 4.1.2, which was
+It was created by repmgr $as_me 4.0.3, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -2359,7 +2359,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by repmgr $as_me 4.1.2, which was
+This file was extended by repmgr $as_me 4.0.3, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -2422,7 +2422,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-repmgr config.status 4.1.2
+repmgr config.status 4.0.3
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 

configure.in

@@ -1,4 +1,4 @@
-AC_INIT([repmgr], [4.1.2], [pgsql-bugs@postgresql.org], [repmgr], [https://2ndquadrant.com/en/resources/repmgr/])
+AC_INIT([repmgr], [4.0.3], [pgsql-bugs@postgresql.org], [repmgr], [https://2ndquadrant.com/en/resources/repmgr/])
 
 AC_COPYRIGHT([Copyright (c) 2010-2018, 2ndQuadrant Ltd.])
 

controldata.c

@@ -37,8 +37,13 @@ get_system_identifier(const char *data_directory)
 	uint64		system_identifier = UNKNOWN_SYSTEM_IDENTIFIER;
 
 	control_file_info = get_controlfile(data_directory);
-	system_identifier = control_file_info->system_identifier;
 
+	if (control_file_info->control_file_processed == true)
+		system_identifier = control_file_info->control_file->system_identifier;
+	else
+		system_identifier = UNKNOWN_SYSTEM_IDENTIFIER;
+
+	pfree(control_file_info->control_file);
 	pfree(control_file_info);
 
 	return system_identifier;
@@ -52,8 +57,13 @@ get_db_state(const char *data_directory)
 
 	control_file_info = get_controlfile(data_directory);
 
-	state = control_file_info->state;
+	if (control_file_info->control_file_processed == true)
+		state = control_file_info->control_file->state;
+	else
+		/* if we were unable to parse the control file, assume DB is shut down */
+		state = DB_SHUTDOWNED;
 
+	pfree(control_file_info->control_file);
 	pfree(control_file_info);
 
 	return state;
@@ -68,8 +78,12 @@ get_latest_checkpoint_location(const char *data_directory)
 
 	control_file_info = get_controlfile(data_directory);
 
-	checkPoint = control_file_info->checkPoint;
+	if (control_file_info->control_file_processed == false)
+		return InvalidXLogRecPtr;
 
+	checkPoint = control_file_info->control_file->checkPoint;
+
+	pfree(control_file_info->control_file);
 	pfree(control_file_info);
 
 	return checkPoint;
@@ -84,8 +98,16 @@ get_data_checksum_version(const char *data_directory)
 
 	control_file_info = get_controlfile(data_directory);
 
-	data_checksum_version = (int) control_file_info->data_checksum_version;
+	if (control_file_info->control_file_processed == false)
+	{
+		data_checksum_version = -1;
+	}
+	else
+	{
+		data_checksum_version = (int) control_file_info->control_file->data_checksum_version;
+	}
 
+	pfree(control_file_info->control_file);
 	pfree(control_file_info);
 
 	return data_checksum_version;
@@ -117,109 +139,33 @@ describe_db_state(DBState state)
 
 
 /*
- * We maintain our own version of get_controlfile() as we need cross-version
+ * we maintain our own version of get_controlfile() as we need cross-version
  * compatibility, and also don't care if the file isn't readable.
  */
 static ControlFileInfo *
 get_controlfile(const char *DataDir)
 {
 	ControlFileInfo *control_file_info;
-	FILE	   *fp = NULL;
-	int			fd, ret, version_num;
-	char		PgVersionPath[MAXPGPATH] = "";
+	int			fd;
 	char		ControlFilePath[MAXPGPATH] = "";
-	char		file_version_string[64] = "";
-	long		file_major, file_minor;
-	char	   *endptr = NULL;
-	void	   *ControlFileDataPtr = NULL;
-	int			expected_size = 0;
 
 	control_file_info = palloc0(sizeof(ControlFileInfo));
-
-	/* set default values */
 	control_file_info->control_file_processed = false;
-	control_file_info->system_identifier = UNKNOWN_SYSTEM_IDENTIFIER;
-	control_file_info->state = DB_SHUTDOWNED;
-	control_file_info->checkPoint = InvalidXLogRecPtr;
-	control_file_info->data_checksum_version = -1;
-
-	/*
-	 * Read PG_VERSION, as we'll need to determine which struct to read
-	 * the control file contents into
-	 */
-	snprintf(PgVersionPath, MAXPGPATH, "%s/PG_VERSION", DataDir);
-
-	fp = fopen(PgVersionPath, "r");
-
-	if (fp == NULL)
-	{
-		log_warning(_("could not open file \"%s\" for reading"),
-					PgVersionPath);
-		log_detail("%s", strerror(errno));
-		return control_file_info;
-	}
-
-	file_version_string[0] = '\0';
-
-	ret = fscanf(fp, "%63s", file_version_string);
-	fclose(fp);
-
-	if (ret != 1 || endptr == file_version_string)
-	{
-		log_warning(_("unable to determine major version number from PG_VERSION"));
-
-		return control_file_info;
-	}
-
-	file_major = strtol(file_version_string, &endptr, 10);
-	file_minor = 0;
-
-	if (*endptr == '.')
-		file_minor = strtol(endptr + 1, NULL, 10);
-
-	version_num = ((int) file_major * 10000) + ((int) file_minor * 100);
-
-	if (version_num < 90300)
-	{
-		log_warning(_("Data directory appears to be initialised for %s"), file_version_string);
-		return control_file_info;
-	}
-
+	control_file_info->control_file = palloc0(sizeof(ControlFileData));
 
 	snprintf(ControlFilePath, MAXPGPATH, "%s/global/pg_control", DataDir);
 
 	if ((fd = open(ControlFilePath, O_RDONLY | PG_BINARY, 0)) == -1)
 	{
-		log_warning(_("could not open file \"%s\" for reading"),
-					ControlFilePath);
-		log_detail("%s", strerror(errno));
+		log_debug("could not open file \"%s\" for reading: %s",
+				  ControlFilePath, strerror(errno));
 		return control_file_info;
 	}
 
-
-	if (version_num >= 90500)
+	if (read(fd, control_file_info->control_file, sizeof(ControlFileData)) != sizeof(ControlFileData))
 	{
-		expected_size = sizeof(ControlFileData95);
-		ControlFileDataPtr = palloc0(expected_size);
-	}
-	else if (version_num >= 90400)
-	{
-		expected_size = sizeof(ControlFileData94);
-		ControlFileDataPtr = palloc0(expected_size);
-	}
-	else if (version_num >= 90300)
-	{
-		expected_size = sizeof(ControlFileData93);
-		ControlFileDataPtr = palloc0(expected_size);
-	}
-
-
-	if (read(fd, ControlFileDataPtr, expected_size) != expected_size)
-	{
-		log_warning(_("could not read file \"%s\""),
-					ControlFilePath);
-		log_detail("%s", strerror(errno));
-
+		log_debug("could not read file \"%s\": %s",
+				  ControlFilePath, strerror(errno));
 		return control_file_info;
 	}
 
@@ -227,41 +173,6 @@ get_controlfile(const char *DataDir)
 
 	control_file_info->control_file_processed = true;
 
-	if (version_num >= 110000)
-	{
-		ControlFileData11 *ptr = (struct ControlFileData11 *)ControlFileDataPtr;
-		control_file_info->system_identifier = ptr->system_identifier;
-		control_file_info->state = ptr->state;
-		control_file_info->checkPoint = ptr->checkPoint;
-		control_file_info->data_checksum_version = ptr->data_checksum_version;
-	}
-	else if (version_num >= 90500)
-	{
-		ControlFileData95 *ptr = (struct ControlFileData95 *)ControlFileDataPtr;
-		control_file_info->system_identifier = ptr->system_identifier;
-		control_file_info->state = ptr->state;
-		control_file_info->checkPoint = ptr->checkPoint;
-		control_file_info->data_checksum_version = ptr->data_checksum_version;
-	}
-	else if (version_num >= 90400)
-	{
-		ControlFileData94 *ptr = (struct ControlFileData94 *)ControlFileDataPtr;
-		control_file_info->system_identifier = ptr->system_identifier;
-		control_file_info->state = ptr->state;
-		control_file_info->checkPoint = ptr->checkPoint;
-		control_file_info->data_checksum_version = ptr->data_checksum_version;
-	}
-	else if (version_num >= 90300)
-	{
-		ControlFileData93 *ptr = (struct ControlFileData93 *)ControlFileDataPtr;
-		control_file_info->system_identifier = ptr->system_identifier;
-		control_file_info->state = ptr->state;
-		control_file_info->checkPoint = ptr->checkPoint;
-		control_file_info->data_checksum_version = ptr->data_checksum_version;
-	}
-
-	pfree(ControlFileDataPtr);
-
 	/*
 	 * We don't check the CRC here as we're potentially checking a pg_control
 	 * file from a different PostgreSQL version to the one repmgr was compiled

controldata.h

@@ -12,326 +12,12 @@
 #include "postgres_fe.h"
 #include "catalog/pg_control.h"
 
-/*
- * A simplified representation of pg_control containing only those fields
- * required by repmgr.
- */
 typedef struct
 {
 	bool		control_file_processed;
-	uint64		system_identifier;
-	DBState		state;
-	XLogRecPtr	checkPoint;
-	uint32		data_checksum_version;
+	ControlFileData *control_file;
 } ControlFileInfo;
 
-
-
-/* Same for 9.3, 9.4 */
-typedef struct CheckPoint93
-{
-	XLogRecPtr	redo;			/* next RecPtr available when we began to
-								 * create CheckPoint (i.e. REDO start point) */
-	TimeLineID	ThisTimeLineID; /* current TLI */
-	TimeLineID	PrevTimeLineID; /* previous TLI, if this record begins a new
-								 * timeline (equals ThisTimeLineID otherwise) */
-	bool		fullPageWrites; /* current full_page_writes */
-	uint32		nextXidEpoch;	/* higher-order bits of nextXid */
-	TransactionId nextXid;		/* next free XID */
-	Oid			nextOid;		/* next free OID */
-	MultiXactId nextMulti;		/* next free MultiXactId */
-	MultiXactOffset nextMultiOffset;	/* next free MultiXact offset */
-	TransactionId oldestXid;	/* cluster-wide minimum datfrozenxid */
-	Oid			oldestXidDB;	/* database with minimum datfrozenxid */
-	MultiXactId oldestMulti;	/* cluster-wide minimum datminmxid */
-	Oid			oldestMultiDB;	/* database with minimum datminmxid */
-	pg_time_t	time;			/* time stamp of checkpoint */
-
-	TransactionId oldestActiveXid;
-} CheckPoint93;
-
-
-/* Same for 9.5, 9.6, 10, HEAD */
-typedef struct CheckPoint95
-{
-	XLogRecPtr	redo;			/* next RecPtr available when we began to
-								 * create CheckPoint (i.e. REDO start point) */
-	TimeLineID	ThisTimeLineID; /* current TLI */
-	TimeLineID	PrevTimeLineID; /* previous TLI, if this record begins a new
-								 * timeline (equals ThisTimeLineID otherwise) */
-	bool		fullPageWrites; /* current full_page_writes */
-	uint32		nextXidEpoch;	/* higher-order bits of nextXid */
-	TransactionId nextXid;		/* next free XID */
-	Oid			nextOid;		/* next free OID */
-	MultiXactId nextMulti;		/* next free MultiXactId */
-	MultiXactOffset nextMultiOffset;	/* next free MultiXact offset */
-	TransactionId oldestXid;	/* cluster-wide minimum datfrozenxid */
-	Oid			oldestXidDB;	/* database with minimum datfrozenxid */
-	MultiXactId oldestMulti;	/* cluster-wide minimum datminmxid */
-	Oid			oldestMultiDB;	/* database with minimum datminmxid */
-	pg_time_t	time;			/* time stamp of checkpoint */
-	TransactionId oldestCommitTsXid;	/* oldest Xid with valid commit
-										 * timestamp */
-	TransactionId newestCommitTsXid;	/* newest Xid with valid commit
-										 * timestamp */
-
-	TransactionId oldestActiveXid;
-} CheckPoint95;
-
-
-typedef struct ControlFileData93
-{
-	uint64		system_identifier;
-
-	uint32		pg_control_version;		/* PG_CONTROL_VERSION */
-	uint32		catalog_version_no;		/* see catversion.h */
-
-	DBState		state;			/* see enum above */
-	pg_time_t	time;			/* time stamp of last pg_control update */
-	XLogRecPtr	checkPoint;		/* last check point record ptr */
-	XLogRecPtr	prevCheckPoint; /* previous check point record ptr */
-
-	CheckPoint93	checkPointCopy; /* copy of last check point record */
-
-	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */
-
-	XLogRecPtr	minRecoveryPoint;
-	TimeLineID	minRecoveryPointTLI;
-	XLogRecPtr	backupStartPoint;
-	XLogRecPtr	backupEndPoint;
-	bool		backupEndRequired;
-
-	int			wal_level;
-	int			MaxConnections;
-	int			max_prepared_xacts;
-	int			max_locks_per_xact;
-
-	uint32		maxAlign;		/* alignment requirement for tuples */
-	double		floatFormat;	/* constant 1234567.0 */
-
-	uint32		blcksz;			/* data block size for this DB */
-	uint32		relseg_size;	/* blocks per segment of large relation */
-
-	uint32		xlog_blcksz;	/* block size within WAL files */
-	uint32		xlog_seg_size;	/* size of each WAL segment */
-
-	uint32		nameDataLen;	/* catalog name field width */
-	uint32		indexMaxKeys;	/* max number of columns in an index */
-
-	uint32		toast_max_chunk_size;	/* chunk size in TOAST tables */
-
-	/* flag indicating internal format of timestamp, interval, time */
-	bool		enableIntTimes; /* int64 storage enabled? */
-
-	/* flags indicating pass-by-value status of various types */
-	bool		float4ByVal;	/* float4 pass-by-value? */
-	bool		float8ByVal;	/* float8, int8, etc pass-by-value? */
-
-	/* Are data pages protected by checksums? Zero if no checksum version */
-	uint32		data_checksum_version;
-
-} ControlFileData93;
-
-
-/*
- * Following fields added since 9.3:
- *
- * 	int			max_worker_processes;
- *  int			max_prepared_xacts;
- *  int			max_locks_per_xact;
- *
- */
-typedef struct ControlFileData94
-{
-	uint64		system_identifier;
-
-	uint32		pg_control_version;		/* PG_CONTROL_VERSION */
-	uint32		catalog_version_no;		/* see catversion.h */
-
-	DBState		state;			/* see enum above */
-	pg_time_t	time;			/* time stamp of last pg_control update */
-	XLogRecPtr	checkPoint;		/* last check point record ptr */
-	XLogRecPtr	prevCheckPoint; /* previous check point record ptr */
-
-	CheckPoint93	checkPointCopy; /* copy of last check point record */
-
-	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */
-
-	XLogRecPtr	minRecoveryPoint;
-	TimeLineID	minRecoveryPointTLI;
-	XLogRecPtr	backupStartPoint;
-	XLogRecPtr	backupEndPoint;
-	bool		backupEndRequired;
-
-	int			wal_level;
-	bool		wal_log_hints;
-	int			MaxConnections;
-	int			max_worker_processes;
-	int			max_prepared_xacts;
-	int			max_locks_per_xact;
-
-	uint32		maxAlign;		/* alignment requirement for tuples */
-	double		floatFormat;	/* constant 1234567.0 */
-
-	uint32		blcksz;			/* data block size for this DB */
-	uint32		relseg_size;	/* blocks per segment of large relation */
-
-	uint32		xlog_blcksz;	/* block size within WAL files */
-	uint32		xlog_seg_size;	/* size of each WAL segment */
-
-	uint32		nameDataLen;	/* catalog name field width */
-	uint32		indexMaxKeys;	/* max number of columns in an index */
-
-	uint32		toast_max_chunk_size;	/* chunk size in TOAST tables */
-	uint32		loblksize;		/* chunk size in pg_largeobject */
-
-	bool		enableIntTimes; /* int64 storage enabled? */
-
-	bool		float4ByVal;	/* float4 pass-by-value? */
-	bool		float8ByVal;	/* float8, int8, etc pass-by-value? */
-
-	/* Are data pages protected by checksums? Zero if no checksum version */
-	uint32		data_checksum_version;
-
-} ControlFileData94;
-
-
-
-/*
- * Following field added since 9.4:
- *
- *	bool		track_commit_timestamp;
- *
- * Unchanged in 9.6
- *
- * In 10, following field appended *after* "data_checksum_version":
- *
- *	char		mock_authentication_nonce[MOCK_AUTH_NONCE_LEN];
- *
- * (but we don't care about that)
- */
-
-typedef struct ControlFileData95
-{
-	uint64		system_identifier;
-
-	uint32		pg_control_version;		/* PG_CONTROL_VERSION */
-	uint32		catalog_version_no;		/* see catversion.h */
-
-	DBState		state;			/* see enum above */
-	pg_time_t	time;			/* time stamp of last pg_control update */
-	XLogRecPtr	checkPoint;		/* last check point record ptr */
-	XLogRecPtr	prevCheckPoint; /* previous check point record ptr */
-
-	CheckPoint95	checkPointCopy; /* copy of last check point record */
-
-	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */
-
-	XLogRecPtr	minRecoveryPoint;
-	TimeLineID	minRecoveryPointTLI;
-	XLogRecPtr	backupStartPoint;
-	XLogRecPtr	backupEndPoint;
-	bool		backupEndRequired;
-
-	int			wal_level;
-	bool		wal_log_hints;
-	int			MaxConnections;
-	int			max_worker_processes;
-	int			max_prepared_xacts;
-	int			max_locks_per_xact;
-	bool		track_commit_timestamp;
-
-	uint32		maxAlign;		/* alignment requirement for tuples */
-	double		floatFormat;	/* constant 1234567.0 */
-
-	uint32		blcksz;			/* data block size for this DB */
-	uint32		relseg_size;	/* blocks per segment of large relation */
-
-	uint32		xlog_blcksz;	/* block size within WAL files */
-	uint32		xlog_seg_size;	/* size of each WAL segment */
-
-	uint32		nameDataLen;	/* catalog name field width */
-	uint32		indexMaxKeys;	/* max number of columns in an index */
-
-	uint32		toast_max_chunk_size;	/* chunk size in TOAST tables */
-	uint32		loblksize;		/* chunk size in pg_largeobject */
-
-	bool		enableIntTimes; /* int64 storage enabled? */
-
-	bool		float4ByVal;	/* float4 pass-by-value? */
-	bool		float8ByVal;	/* float8, int8, etc pass-by-value? */
-
-	uint32		data_checksum_version;
-
-} ControlFileData95;
-
-/*
- * Following field removed in 11:
- *
- *  XLogRecPtr	prevCheckPoint;
- *
- * In 10, following field appended *after* "data_checksum_version":
- *
- * 	char		mock_authentication_nonce[MOCK_AUTH_NONCE_LEN];
- *
- * (but we don't care about that)
- */
-
-typedef struct ControlFileData11
-{
-	uint64		system_identifier;
-
-	uint32		pg_control_version;		/* PG_CONTROL_VERSION */
-	uint32		catalog_version_no;		/* see catversion.h */
-
-	DBState		state;			/* see enum above */
-	pg_time_t	time;			/* time stamp of last pg_control update */
-	XLogRecPtr	checkPoint;		/* last check point record ptr */
-
-	CheckPoint95	checkPointCopy; /* copy of last check point record */
-
-	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */
-
-	XLogRecPtr	minRecoveryPoint;
-	TimeLineID	minRecoveryPointTLI;
-	XLogRecPtr	backupStartPoint;
-	XLogRecPtr	backupEndPoint;
-	bool		backupEndRequired;
-
-	int			wal_level;
-	bool		wal_log_hints;
-	int			MaxConnections;
-	int			max_worker_processes;
-	int			max_prepared_xacts;
-	int			max_locks_per_xact;
-	bool		track_commit_timestamp;
-
-	uint32		maxAlign;		/* alignment requirement for tuples */
-	double		floatFormat;	/* constant 1234567.0 */
-
-	uint32		blcksz;			/* data block size for this DB */
-	uint32		relseg_size;	/* blocks per segment of large relation */
-
-	uint32		xlog_blcksz;	/* block size within WAL files */
-	uint32		xlog_seg_size;	/* size of each WAL segment */
-
-	uint32		nameDataLen;	/* catalog name field width */
-	uint32		indexMaxKeys;	/* max number of columns in an index */
-
-	uint32		toast_max_chunk_size;	/* chunk size in TOAST tables */
-	uint32		loblksize;		/* chunk size in pg_largeobject */
-
-	bool		enableIntTimes; /* int64 storage enabled? */
-
-	bool		float4ByVal;	/* float4 pass-by-value? */
-	bool		float8ByVal;	/* float8, int8, etc pass-by-value? */
-
-	uint32		data_checksum_version;
-
-} ControlFileData11;
-
-
-
 extern DBState get_db_state(const char *data_directory);
 extern const char *describe_db_state(DBState state);
 extern int	get_data_checksum_version(const char *data_directory);

dbutils.h

@@ -29,9 +29,7 @@
 #include "voting.h"
 
 #define REPMGR_NODES_COLUMNS "n.node_id, n.type, n.upstream_node_id, n.node_name, n.conninfo, n.repluser, n.slot_name, n.location, n.priority, n.active, n.config_file, '' AS upstream_node_name "
-#define BDR2_NODES_COLUMNS "node_sysid, node_timeline, node_dboid, node_name, node_local_dsn, ''"
-#define BDR3_NODES_COLUMNS "ns.node_id, 0, 0, ns.node_name, ns.interface_connstr, ns.peer_state_name"
-
+#define BDR_NODES_COLUMNS "node_sysid, node_timeline, node_dboid, node_status, node_name, node_local_dsn, node_init_from_dsn, node_read_only, node_seq_id"
 
 #define ERRBUFF_SIZE 512
 
@@ -96,14 +94,6 @@ typedef enum
 	SLOT_ACTIVE
 } ReplSlotStatus;
 
-typedef enum
-{
-	BACKUP_STATE_UNKNOWN = -1,
-	BACKUP_STATE_IN_BACKUP,
-	BACKUP_STATE_NO_BACKUP
-} BackupState;
-
-
 /*
  * Struct to store node information
  */
@@ -247,14 +237,18 @@ typedef struct s_bdr_node_info
 	char		node_sysid[MAXLEN];
 	uint32		node_timeline;
 	uint32		node_dboid;
+	char		node_status;
 	char		node_name[MAXLEN];
 	char		node_local_dsn[MAXLEN];
-	char		peer_state_name[MAXLEN];
+	char		node_init_from_dsn[MAXLEN];
+	bool		read_only;
+	uint32		node_seq_id;
 } t_bdr_node_info;
 
 #define T_BDR_NODE_INFO_INITIALIZER { \
 	"", InvalidOid, InvalidOid, \
-    "", "", "" \
+	'?', "", "", "", \
+    false, -1 \
 }
 
 
@@ -349,6 +343,9 @@ bool		atobool(const char *value);
 PGconn *establish_db_connection(const char *conninfo,
 						const bool exit_on_error);
 PGconn	   *establish_db_connection_quiet(const char *conninfo);
+PGconn *establish_db_connection_as_user(const char *conninfo,
+								const char *user,
+								const bool exit_on_error);
 
 PGconn *establish_db_connection_by_params(t_conninfo_param_list *param_list,
 								  const bool exit_on_error);
@@ -359,11 +356,10 @@ PGconn	   *get_primary_connection(PGconn *standby_conn, int *primary_id, char *p
 PGconn	   *get_primary_connection_quiet(PGconn *standby_conn, int *primary_id, char *primary_conninfo_out);
 
 bool		is_superuser_connection(PGconn *conn, t_connection_user *userinfo);
-void		close_connection(PGconn **conn);
 
 /* conninfo manipulation functions */
 bool		get_conninfo_value(const char *conninfo, const char *keyword, char *output);
-bool		get_conninfo_default_value(const char *param, char *output, int maxlen);
+
 void		initialize_conninfo_params(t_conninfo_param_list *param_list, bool set_defaults);
 void		free_conninfo_params(t_conninfo_param_list *param_list);
 void		copy_conninfo_params(t_conninfo_param_list *dest_list, t_conninfo_param_list *source_list);
@@ -371,11 +367,10 @@ void		conn_to_param_list(PGconn *conn, t_conninfo_param_list *param_list);
 void		param_set(t_conninfo_param_list *param_list, const char *param, const char *value);
 void		param_set_ine(t_conninfo_param_list *param_list, const char *param, const char *value);
 char	   *param_get(t_conninfo_param_list *param_list, const char *param);
-bool		parse_conninfo_string(const char *conninfo_str, t_conninfo_param_list *param_list, char **errmsg, bool ignore_local_params);
+bool		parse_conninfo_string(const char *conninfo_str, t_conninfo_param_list *param_list, char *errmsg, bool ignore_local_params);
 char	   *param_list_to_string(t_conninfo_param_list *param_list);
 bool		has_passfile(void);
 
-
 /* transaction functions */
 bool		begin_transaction(PGconn *conn);
 bool		commit_transaction(PGconn *conn);
@@ -394,11 +389,11 @@ bool		get_cluster_size(PGconn *conn, char *size);
 int			get_server_version(PGconn *conn, char *server_version);
 RecoveryType get_recovery_type(PGconn *conn);
 int			get_primary_node_id(PGconn *conn);
+bool		can_use_pg_rewind(PGconn *conn, const char *data_directory, PQExpBufferData *reason);
 int			get_ready_archive_files(PGconn *conn, const char *data_directory);
 bool		identify_system(PGconn *repl_conn, t_system_identification *identification);
 bool		repmgrd_set_local_node_id(PGconn *conn, int local_node_id);
 int			repmgrd_get_local_node_id(PGconn *conn);
-BackupState	server_in_exclusive_backup_mode(PGconn *conn);
 
 /* extension functions */
 ExtensionStatus get_repmgr_extension_status(PGconn *conn);
@@ -413,8 +408,6 @@ t_server_type parse_node_type(const char *type);
 const char *get_node_type_string(t_server_type type);
 
 RecordStatus get_node_record(PGconn *conn, int node_id, t_node_info *node_info);
-RecordStatus get_node_record_with_upstream(PGconn *conn, int node_id, t_node_info *node_info);
-
 RecordStatus get_node_record_by_name(PGconn *conn, const char *node_name, t_node_info *node_info);
 t_node_info *get_node_record_pointer(PGconn *conn, int node_id);
 
@@ -426,7 +419,7 @@ void		get_downstream_node_records(PGconn *conn, int node_id, NodeInfoList *nodes
 void		get_active_sibling_node_records(PGconn *conn, int node_id, int upstream_node_id, NodeInfoList *node_list);
 void		get_node_records_by_priority(PGconn *conn, NodeInfoList *node_list);
 bool		get_all_node_records_with_upstream(PGconn *conn, NodeInfoList *node_list);
-bool		get_downstream_nodes_with_missing_slot(PGconn *conn, int this_node_id, NodeInfoList *noede_list);
+bool		get_downsteam_nodes_with_missing_slot(PGconn *conn, int this_node_id, NodeInfoList *noede_list);
 
 bool		create_node_record(PGconn *conn, char *repmgr_action, t_node_info *node_info);
 bool		update_node_record(PGconn *conn, char *repmgr_action, t_node_info *node_info);
@@ -435,7 +428,6 @@ bool		truncate_node_records(PGconn *conn);
 
 bool		update_node_record_set_active(PGconn *conn, int this_node_id, bool active);
 bool		update_node_record_set_primary(PGconn *conn, int this_node_id);
-bool		update_node_record_set_active_standby(PGconn *conn, int this_node_id);
 bool		update_node_record_set_upstream(PGconn *conn, int this_node_id, int new_upstream_node_id);
 bool		update_node_record_status(PGconn *conn, int this_node_id, char *type, int upstream_node_id, bool active);
 bool		update_node_record_conn_priority(PGconn *conn, t_configuration_options *options);
@@ -462,8 +454,7 @@ void		create_slot_name(char *slot_name, int node_id);
 bool		create_replication_slot(PGconn *conn, char *slot_name, int server_version_num, PQExpBufferData *error_msg);
 bool		drop_replication_slot(PGconn *conn, char *slot_name);
 RecordStatus get_slot_record(PGconn *conn, char *slot_name, t_replication_slot *record);
-int			get_free_replication_slot_count(PGconn *conn);
-int			get_inactive_replication_slots(PGconn *conn, KeyValueList *list);
+int			get_free_replication_slots(PGconn *conn);
 
 /* tablespace functions */
 bool		get_tablespace_name_by_location(PGconn *conn, const char *location, char *name);
@@ -474,8 +465,6 @@ int			wait_connection_availability(PGconn *conn, long long timeout);
 
 /* node availability functions */
 bool		is_server_available(const char *conninfo);
-bool		is_server_available_params(t_conninfo_param_list *param_list);
-ExecStatusType	connection_ping(PGconn *conn);
 
 /* monitoring functions  */
 void
@@ -514,14 +503,12 @@ void		get_node_replication_stats(PGconn *conn, int server_version_num, t_node_in
 bool		is_downstream_node_attached(PGconn *conn, char *node_name);
 
 /* BDR functions */
-int			get_bdr_version_num(void);
 void		get_all_bdr_node_records(PGconn *conn, BdrNodeInfoList *node_list);
 RecordStatus get_bdr_node_record_by_name(PGconn *conn, const char *node_name, t_bdr_node_info *node_info);
 bool		is_bdr_db(PGconn *conn, PQExpBufferData *output);
 bool		is_bdr_db_quiet(PGconn *conn);
 bool		is_active_bdr_node(PGconn *conn, const char *node_name);
 bool		is_bdr_repmgr(PGconn *conn);
-char	   *get_default_bdr_replication_set(PGconn *conn);
 bool		is_table_in_bdr_replication_set(PGconn *conn, const char *tablename, const char *set);
 bool		add_table_to_bdr_replication_set(PGconn *conn, const char *tablename, const char *set);
 void		add_extension_tables_to_bdr_replication_set(PGconn *conn);

doc/appendix-faq.sgml

@@ -24,9 +24,8 @@
       series will no longer be actively maintained.
      </para>
      <para>
-      &repmgr; 2.x supports PostgreSQL 9.0 ~ 9.3. While it is compatible
-      with PostgreSQL 9.3, we recommend using repmgr 4.x. &repmgr; 2.x is
-      no longer maintained.
+      repmgr 2.x supports PostgreSQL 9.0 ~ 9.3. While it is compatible
+      with PostgreSQL 9.3, we recommend using repmgr 4.x.
      </para>
   </sect2>
 
@@ -36,7 +35,7 @@
     Replication slots, introduced in PostgreSQL 9.4, ensure that the
     primary server will retain WAL files until they have been consumed
     by all standby servers. This makes WAL file management much easier,
-    and if used &repmgr; will no longer insist on a fixed minimum number
+    and if used `repmgr` will no longer insist on a fixed minimum number
     (default: 5000) of WAL files being retained.
    </para>
    <para>
@@ -70,58 +69,12 @@
     in a streaming replication cluster.
    </para>
   </sect2>
-
-  <sect2 id="faq-upgrades" xreflabel="Upgrading PostgreSQL with repmgr">
-   <title>Can &repmgr; assist with upgrading a PostgreSQL cluster?</title>
-   <para>
-     For <emphasis>minor</emphasis> version upgrades, e.g. from 9.6.7 to 9.6.8, a common
-     approach is to upgrade a standby to the latest version, perform a
-     <link linkend="performing-switchover">switchover</link> promoting it to a primary,
-     then upgrade the former primary.
-   </para>
-   <para>
-     For <emphasis>major</emphasis> version upgrades (e.g. from PostgreSQL 9.6 to PostgreSQL 10),
-     the traditional approach is to "reseed" a cluster by upgrading a single
-     node with <ulink url="https://www.postgresql.org/docs/current/static/pgupgrade.html">pg_upgrade</ulink>
-     and recloning standbys from this.
-   </para>
-   <para>
-     To minimize downtime during major upgrades, for more recent PostgreSQL
-     versions (PostgreSQL 9.4 and later),
-     <ulink url="https://www.2ndquadrant.com/en/resources/pglogical/">pglogical</ulink>
-     can be used to set up a parallel cluster using the newer PostgreSQL version,
-     which can be kept in sync with the existing production cluster until the
-     new cluster is ready to be put into production.
-   </para>
-  </sect2>
-
-  <sect2 id="faq-libdir-repmgr-error">
-   <title>What does this error mean: <literal>ERROR: could not access file "$libdir/repmgr"</literal>?</title>
-   <para>
-     It means the &repmgr; extension code is not installed in the
-     PostgreSQL application directory. This typically happens when using PostgreSQL
-     packages provided by a third-party vendor, which often have different
-     filesystem layouts.
-   </para>
-   <para>
-     Either use PostgreSQL packages provided by the community or 2ndQuadrant; if this
-     is not possible, contact your vendor for assistance.
-   </para>
-  </sect2>
-
-  <sect2 id="faq-old-packages">
-   <title>How can I obtain old versions of &repmgr; packages?</title>
-   <para>
-     See appendix <xref linkend="packages-old-versions"> for details.
-   </para>
-  </sect2>
-
  </sect1>
 
  <sect1 id="faq-repmgr" xreflabel="repmgr">
   <title><command>repmgr</command></title>
 
-  <sect2 id="faq-register-existing-node" xreflabel="registering an existing node">
+  <sect2 id="faq-register-existing-node" xreflabel="">
    <title>Can I register an existing PostgreSQL server with repmgr?</title>
    <para>
     Yes, any existing PostgreSQL server which is part of the same replication
@@ -130,26 +83,6 @@
    </para>
   </sect2>
 
-  <sect2 id="faq-repmgr-clone-other-source" >
-   <title>Can I use a standby not cloned by &repmgr; as a &repmgr; node?</title>
-
-   <para>
-     For a standby which has been manually cloned or recovered from an external
-     backup manager such as Barman, the command
-     <command><link linkend="repmgr-standby-clone">repmgr standby clone --recovery-conf-only</link></command>
-     can be used to create the correct <filename>recovery.conf</filename> file for
-     use with &repmgr; (and will create a replication slot if required). Once this has been done,
-     <link linkend="repmgr-standby-register">register the node</link> as usual.
-   </para>
-  </sect2>
-
-  <sect2 id="faq-repmgr-recovery-conf" >
-    <title>What does &repmgr; write in <filename>recovery.conf</filename>, and what options can be set there?</title>
-   <para>
-     See section <link linkend="repmgr-standby-clone-recovery-conf">Customising recovery.conf</link>.
-   </para>
-  </sect2>
-
   <sect2 id="faq-repmgr-failed-primary-standby" xreflabel="Reintegrate a failed primary as a standby">
    <title>How can a failed primary be re-added as a standby?</title>
    <para>
@@ -158,23 +91,19 @@
     needs to be re-registered as a standby.
    </para>
    <para>
-    It's possible to use <command>pg_rewind</command> to re-synchronise the existing data
-    directory, which will usually be much
+    In PostgreSQL 9.5 and later, it's possible to use <command>pg_rewind</command>
+    to re-synchronise the existing data directory, which will usually be much
     faster than re-cloning the server. However <command>pg_rewind</command> can only
     be used if PostgreSQL either has <varname>wal_log_hints</varname> enabled, or
     data checksums were enabled when the cluster was initialized.
    </para>
-   <para>
-     Note that <command>pg_rewind</command> is available as part of the core PostgreSQL
-     distribution from PostgreSQL 9.5, and as a third-party utility for PostgreSQL 9.3 and 9.4.
-   </para>
    <para>
     &repmgr; provides the command <command>repmgr node rejoin</command> which can
     optionally execute <command>pg_rewind</command>; see the <xref linkend="repmgr-node-rejoin">
-    documentation for details, in particular the section <xref linkend="repmgr-node-rejoin-pg-rewind">.
+    documentation for details.
    </para>
    <para>
-    If <command>pg_rewind</command> cannot be used, then the data directory will need
+    If <command>pg_rewind</command> cannot be used, then the data directory will have
     to be re-cloned from scratch.
    </para>
 
@@ -247,24 +176,10 @@
      Under some circumstances event notifications can be generated for servers
      which have not yet been registered; it's also useful to retain a record
      of events which includes servers removed from the replication cluster
-     which no longer have an entry in the <literal>repmgr.nodes</literal> table.
+     which no longer have an entry in the <literal>repmrg.nodes</literal> table.
    </para>
   </sect2>
 
-  <sect2 id="faq-repmgr-recovery-conf-quoted-values" xreflabel="Quoted values in recovery.conf">
-    <title>Why are some values in <filename>recovery.conf</filename> surrounded by pairs of single quotes?</title>
-    <para>
-      This is to ensure that user-supplied values which are written as parameter values in <filename>recovery.conf</filename>
-      are escaped correctly and do not cause errors when <filename>recovery.conf</filename> is parsed.
-    </para>
-    <para>
-      The escaping is performed by an internal PostgreSQL routine, which leaves strings consisting
-      of digits and alphabetical characters only as-is, but wraps everything else in pairs of single quotes,
-      even if the string does not contain any characters which need escaping.
-    </para>
-  </sect2>
-
-
  </sect1>
 
  <sect1 id="faq-repmgrd" xreflabel="repmgrd">
@@ -274,7 +189,7 @@
   <sect2 id="faq-repmgrd-prevent-promotion" xreflabel="Prevent standby from being promoted to primary">
    <title>How can I prevent a node from ever being promoted to primary?</title>
    <para>
-     In <filename>repmgr.conf</filename>, set its priority to a value of <literal>0</literal>; apply the changed setting with
+    In `repmgr.conf`, set its priority to a value of 0 or less; apply the changed setting with
     <command><link linkend="repmgr-standby-register">repmgr standby register --force</link></command>.
    </para>
    <para>
@@ -322,36 +237,5 @@
    </para>
   </sect2>
 
-  <sect2 id="faq-repmgrd-pg-bindir" xreflabel="repmgrd does not apply pg_bindir to promote_command or follow_command">
-    <title>
-      <application>repmgrd</application> ignores pg_bindir when executing <varname>promote_command</varname> or <varname>follow_command</varname>
-    </title>
-    <para>
-      <varname>promote_command</varname> or <varname>follow_command</varname> can be user-defined scripts,
-      so &repmgr; will not apply <option>pg_bindir</option> even if excuting &repmgr;. Always provide the full
-      path; see <xref linkend="repmgrd-automatic-failover-configuration"> for more details.
-    </para>
-  </sect2>
-
-  <sect2 id="faq-repmgrd-startup-no-upstream" xreflabel="repmgrd does not start if upstream node is not running">
-    <title>
-      <application>repmgrd</application> aborts startup with the error "<literal>upstream node must be running before repmgrd can start</literal>"
-    </title>
-    <para>
-      <application>repmgrd</application> does this to avoid starting up on a replication cluster
-      which is not in a healthy state. If the upstream is unavailable, <application>repmgrd</application>
-      may initiate a failover immediately after starting up, which could have unintended side-effects,
-      particularly if <application>repmgrd</application> is not running on other nodes.
-    </para>
-    <para>
-      In particular, it's possible that the node's local copy of the <literal>repmgr.nodes</literal> copy
-      is out-of-date, which may lead to incorrect failover behaviour.
-    </para>
-    <para>
-      The onus is therefore on the adminstrator to manually set the cluster to a stable, healthy state before
-      starting <application>repmgrd</application>.
-    </para>
-  </sect2>
-
  </sect1>
 </appendix>

doc/appendix-packages.sgml

@@ -1,119 +1,48 @@
 <appendix id="appendix-packages" xreflabel="Package details">
-  <indexterm>
-    <primary>packages</primary>
-  </indexterm>
+ <indexterm>
+  <primary>packages</primary>
+ </indexterm>
 
-  <title>&repmgr; package details</title>
+ <title>&repmgr; package details</title>
+ <para>
+   This section provides technical details about various &repmgr; binary
+   packages, such as location of the installed binaries and
+   configuration files.
+ </para>
+
+ <sect1 id="packages-centos" xreflabel="CentOS packages">
+  <title>CentOS, RHEL, Scientific Linux etc.</title>
   <para>
-    This section provides technical details about various &repmgr; binary
-    packages, such as location of the installed binaries and
-    configuration files.
+    Currently packages are provided for versions 6.x and 7.x of CentOS et al.
   </para>
 
-  <sect1 id="packages-centos" xreflabel="CentOS packages">
-    <title>CentOS Packages</title>
-    <indexterm>
-      <primary>packages</primary>
-      <secondary>CentOS packages</secondary>
-    </indexterm>
+  <note>
     <para>
-      Currently, &repmgr; RPM packages are provided for versions 6.x and 7.x of CentOS. These should also
-      work on matching versions of Red Hat Enterprise Linux, Scientific Linux and Oracle Enterprise Linux;
-      together with CentOS, these are the same RedHat-based distributions for which the main community project
-      (PGDG) provides packages (see the <ulink url="https://yum.postgresql.org/">PostgreSQL RPM Building Project</ulink>
-      page for details).
+      For PostgreSQL 9.6 and lower, the CentOS packages use a mixture of <literal>9.6</literal>
+      and <literal>96</literal> in various places to designate the major version;
+      from PostgreSQL 10, the first part of the version number (e.g. <literal>10</literal>) is
+      the major version, so there is more consistency in file/path/package naming.
     </para>
-
-    <para>
-      Note these &repmgr; RPM packages are not designed to work with SuSE/OpenSuSE.
-    </para>
-
-    <note>
-      <para>
-        &repmgr; packages are designed to be compatible with community-provided PostgreSQL packages.
-        They may not work with vendor-specific packages such as those provided by RedHat for RHEL
-        customers, as the filesystem layout may be different to the community RPMs.
-        Please contact your support vendor for assistance.
-      </para>
-    </note>
-
-    <sect2 id="packages-centos-repositories">
-      <title>CentOS repositories</title>
-
-      <para>
-        &repmgr; packages are available from the public 2ndQuadrant repository, and also the
-        PostgreSQL community repository. The 2ndQuadrant repository is updated immediately
-        after each
-        &repmgr; release.
-      </para>
-
-      <table id="centos-2ndquadrant-repository">
-        <title>2ndQuadrant public repository</title>
-        <tgroup cols="2">
-          <tbody>
-            <row>
-              <entry>Repository URL:</entry>
-              <entry><ulink url="https://dl.2ndquadrant.com/">https://dl.2ndquadrant.com/</ulink></entry>
-            </row>
-            <row>
-              <entry>Repository documentation:</entry>
-              <entry><ulink url="https://repmgr.org/docs/4.1/installation-packages.html#INSTALLATION-PACKAGES-REDHAT-2NDQ">https://repmgr.org/docs/4.1/installation-packages.html#INSTALLATION-PACKAGES-REDHAT-2NDQ</ulink></entry>
-            </row>
-          </tbody>
-        </tgroup>
-      </table>
-
-      <table id="centos-pgdg-repository">
-        <title>PostgreSQL community repository (PGDG)</title>
-        <tgroup cols="2">
-          <tbody>
-            <row>
-              <entry>Repository URL:</entry>
-              <entry><ulink url="https://yum.postgresql.org/repopackages.php">https://yum.postgresql.org/repopackages.php</ulink></entry>
-            </row>
-            <row>
-              <entry>Repository documentation:</entry>
-              <entry><ulink url="https://yum.postgresql.org/">https://yum.postgresql.org/</ulink></entry>
-            </row>
-          </tbody>
-        </tgroup>
-      </table>
-
-    </sect2>
-
-    <sect2 id="packages-centos-details">
-      <title>CentOS package details</title>
-
-      <para>
-        The two tables below list relevant information, paths, commands etc. for the &repmgr; packages on
-        CentOS 7 (with systemd) and CentOS 6 (no systemd). Substitute the appropriate PostgreSQL major
-        version number for your installation.
-      </para>
-
-      <note>
-        <para>
-          For PostgreSQL 9.6 and lower, the CentOS packages use a mixture of <literal>9.6</literal>
-          and <literal>96</literal> in various places to designate the major version; e.g. the
-          package name is <literal>repmgr96</literal>, but the binary directory is
-          <filename>/var/lib/pgsql/9.6/data</filename>.
-        </para>
-        <para>
-          From PostgreSQL 10, the first part of the version number (e.g. <literal>10</literal>) is
-          the major version, so there is more consistency in file/path/package naming
-          (package <literal>repmgr10</literal>, binary directory <filename>/var/lib/pgsql/10/data</filename>).
-        </para>
-      </note>
-
+  </note>
 
   <table id="centos-7-packages">
    <title>CentOS 7 packages</title>
 
    <tgroup cols="2">
     <tbody>
+     <row>
+      <entry>Repository URL:</entry>
+      <entry><ulink url="https://yum.postgresql.org/repopackages.php">https://yum.postgresql.org/repopackages.php</ulink></entry>
+     </row>
+
+     <row>
+      <entry>Repository documentation:</entry>
+      <entry><ulink url="https://yum.postgresql.org/">https://yum.postgresql.org/</ulink></entry>
+     </row>
 
      <row>
       <entry>Package name example:</entry>
-      <entry><filename>repmgr10-4.0.4-1.rhel7.x86_64</filename></entry>
+      <entry><filename>repmgr10-4.0.0-1.rhel7.x86_64</filename></entry>
      </row>
 
      <row>
@@ -123,7 +52,7 @@
 
      <row>
       <entry>Installation command:</entry>
-      <entry><literal>yum install repmgr10</literal></entry>
+      <entry><literal>yum install -y repmgr10</literal></entry>
      </row>
 
      <row>
@@ -132,7 +61,7 @@
      </row>
 
      <row>
-      <entry>repmgr in default path:</entry>
+      <entry>In default path:</entry>
       <entry>NO</entry>
      </row>
 
@@ -141,14 +70,9 @@
       <entry><filename>/etc/repmgr/10/repmgr.conf</filename></entry>
      </row>
 
-     <row>
-      <entry>Data directory:</entry>
-      <entry><filename>/var/lib/pgsql/10/data</filename></entry>
-     </row>
-
      <row>
       <entry>repmgrd service command:</entry>
-      <entry><command>systemctl [start|stop|restart|reload] repmgr10</command></entry>
+      <entry><literal>service repmgr10</literal></entry>
      </row>
 
      <row>
@@ -158,7 +82,7 @@
 
      <row>
       <entry>repmgrd log file location:</entry>
-      <entry>(not specified by package; set in <filename>repmgr.conf</filename>)</entry>
+      <entry>(not specified)</entry>
      </row>
 
     </tbody>
@@ -170,20 +94,29 @@
 
    <tgroup cols="2">
     <tbody>
+     <row>
+      <entry>Repository URL:</entry>
+      <entry><ulink url="https://yum.postgresql.org/repopackages.php">https://yum.postgresql.org/repopackages.php</ulink></entry>
+     </row>
+
+     <row>
+      <entry>Repository documentation:</entry>
+      <entry><ulink url="https://yum.postgresql.org/">https://yum.postgresql.org/</ulink></entry>
+     </row>
 
      <row>
       <entry>Package name example:</entry>
-      <entry><filename>repmgr96-4.0.4-1.rhel6.x86_64</filename></entry>
+      <entry><filename>repmgr96-4.0.0-1.rhel6.x86_64</filename></entry>
      </row>
 
      <row>
       <entry>Metapackage:</entry>
-      <entry>(none)</entry>
+      <entry>NO</entry>
      </row>
 
      <row>
       <entry>Installation command:</entry>
-      <entry><literal>yum install repmgr96</literal></entry>
+      <entry><literal>yum install -y repmgr96</literal></entry>
      </row>
 
      <row>
@@ -192,7 +125,7 @@
      </row>
 
      <row>
-      <entry>repmgr in default path:</entry>
+      <entry>In default path:</entry>
       <entry>NO</entry>
      </row>
 
@@ -201,14 +134,9 @@
       <entry><filename>/etc/repmgr/9.6/repmgr.conf</filename></entry>
      </row>
 
-     <row>
-      <entry>Data directory:</entry>
-      <entry><filename>/var/lib/pgsql/9.6/data</filename></entry>
-     </row>
-
      <row>
       <entry>repmgrd service command:</entry>
-      <entry><literal>service [start|stop|restart|reload] repmgr-9.6</literal></entry>
+      <entry>service repmgr-9.6</entry>
      </row>
 
      <row>
@@ -225,325 +153,6 @@
    </tgroup>
   </table>
 
-    </sect2>
+
  </sect1>
-
-
-
-
-  <sect1 id="packages-debian-ubuntu" xreflabel="Debian/Ubuntu packages">
-    <title>Debian/Ubuntu Packages</title>
-    <indexterm>
-      <primary>packages</primary>
-      <secondary>Debian/Ubuntu packages</secondary>
-    </indexterm>
-    <para>
-      &repmgr; <literal>.deb</literal> packages are provided via the
-      PostgreSQL Community APT repository, and are available for each community-supported
-      PostgreSQL version, currently supported Debian releases, and currently supported
-      Ubuntu LTS releases.
-    </para>
-
-    <sect2 id="packages-apt-repository">
-      <title>APT repository</title>
-
-      <para>
-        &repmgr; packages are available from the  PostgreSQL Community APT repository,
-        which is updated immediately after each &repmgr; release.
-      </para>
-
-
-      <table id="apt-2ndquadrant-repository">
-        <title>2ndQuadrant public repository</title>
-        <tgroup cols="2">
-          <tbody>
-            <row>
-              <entry>Repository URL:</entry>
-              <entry><ulink url="https://dl.2ndquadrant.com/">https://dl.2ndquadrant.com/</ulink></entry>
-            </row>
-            <row>
-              <entry>Repository documentation:</entry>
-              <entry><ulink url="https://repmgr.org/docs/4.1/installation-packages.html#INSTALLATION-PACKAGES-DEBIAN">https://repmgr.org/docs/4.1/installation-packages.html#INSTALLATION-PACKAGES-DEBIAN</ulink></entry>
-            </row>
-          </tbody>
-        </tgroup>
-      </table>
-
-
-      <table id="apt-repository">
-        <title>PostgreSQL Community APT repository (PGDG)</title>
-        <tgroup cols="2">
-          <tbody>
-            <row>
-              <entry>Repository URL:</entry>
-              <entry><ulink url="http://apt.postgresql.org/">http://apt.postgresql.org/</ulink></entry>
-            </row>
-            <row>
-              <entry>Repository documentation:</entry>
-              <entry><ulink url="https://wiki.postgresql.org/wiki/Apt)">https://wiki.postgresql.org/wiki/Apt)</ulink></entry>
-            </row>
-          </tbody>
-        </tgroup>
-      </table>
-    </sect2>
-
-   <sect2 id="packages-debian-details">
-      <title>Debian/Ubuntu package details</title>
-
-      <para>
-        The table below lists relevant information, paths, commands etc. for the &repmgr; packages on
-        Debian 9.x ("Stretch"). Substitute the appropriate PostgreSQL major
-        version number for your installation.
-      </para>
-      <para>
-        See also <xref linkend="repmgrd-configuration-debian-ubuntu"> for some specifics related
-        to configuring the <application>repmgrd</application> daemon.
-      </para>
-
-      <table id="debian-9-packages">
-        <title>Debian 9.x packages</title>
-
-        <tgroup cols="2">
-          <tbody>
-
-            <row>
-              <entry>Package name example:</entry>
-              <entry><filename>postgresql-10-repmgr</filename></entry>
-            </row>
-
-            <row>
-              <entry>Metapackage:</entry>
-              <entry><filename>repmgr-common</filename></entry>
-            </row>
-
-            <row>
-              <entry>Installation command:</entry>
-              <entry><literal>apt-get install postgresql-10-repmgr</literal></entry>
-            </row>
-
-            <row>
-              <entry>Binary location:</entry>
-              <entry><filename>/usr/lib/postgresql/10/bin</filename></entry>
-            </row>
-
-            <row>
-              <entry>repmgr in default path:</entry>
-              <entry>Yes (via wrapper script <filename>/usr/bin/repmgr</filename>)</entry>
-            </row>
-
-            <row>
-              <entry>Configuration file location:</entry>
-              <entry>(not set by package)</entry>
-            </row>
-
-            <row>
-              <entry>Data directory:</entry>
-              <entry><filename>/var/lib/postgresql/10/main</filename></entry>
-            </row>
-
-            <row>
-              <entry>PostgreSQL service command:</entry>
-              <entry><command>systemctl [start|stop|restart|reload] postgresql@10-main</command></entry>
-
-            </row>
-
-            <row>
-              <entry>repmgrd service command:</entry>
-              <entry><command>systemctl [start|stop|restart|reload] repmgrd</command></entry>
-            </row>
-
-            <row>
-              <entry>repmgrd service file location:</entry>
-              <entry><filename>/etc/init.d/repmgrd</filename> (defaults in: <filename>/etc/defaults/repmgrd</filename>)</entry>
-            </row>
-
-            <row>
-              <entry>repmgrd log file location:</entry>
-              <entry>(not specified by package; set in <filename>repmgr.conf</filename>)</entry>
-            </row>
-
-          </tbody>
-        </tgroup>
-      </table>
-      <note>
-        <para>
-          Instead of using the <application>systemd</application> service command directly,
-          it's recommended to execute <command>pg_ctlcluster</command> (as <literal>root</literal>,
-          either directly or via <command>sudo</command>), e.g.:
-          <programlisting>
-            <command>pg_ctlcluster 10 main [start|stop|restart|reload]</command></programlisting>
-        </para>
-        <para>
-          For pre-<application>systemd</application> systems, <command>pg_ctlcluster</command>
-          can be executed directly by the <literal>postgres</literal> user.
-        </para>
-      </note>
-   </sect2>
-
-  </sect1>
-
-  <sect1 id="packages-snapshot" xreflabel="Snapshot packages">
-    <title>Snapshot packages</title>
-    <indexterm>
-      <primary>snapshot packages</primary>
-    </indexterm>
-    <indexterm>
-      <primary>packages</primary>
-      <secondary>snaphots</secondary>
-    </indexterm>
-
-    <para>
-      For testing new features and bug fixes, from time to time 2ndQuadrant provides
-      so-called &quot;snapshot packages&quot; via its public repository. These packages
-      are built from the &repmgr; source at a particular point in time, and are not formal
-      releases.
-    </para>
-    <note>
-      <para>
-        We do not recommend installing these packages in a production environment
-        unless specifically advised.
-      </para>
-    </note>
-    <para>
-      To install a snapshot package, it's necessary to install the 2ndQuadrant public snapshot repository,
-      following the instructions here: <ulink url="https://dl.2ndquadrant.com/default/release/site/">https://dl.2ndquadrant.com/default/release/site/</ulink> but replace <literal>release</literal> with <literal>snapshot</literal>
-      in the appropriate URL.
-    </para>
-    <para>
-      For example, to install the snapshot RPM repository for PostgreSQL 9.6, execute (as <literal>root</literal>):
-      <programlisting>
-curl https://dl.2ndquadrant.com/default/snapshot/get/9.6/rpm | bash</programlisting>
-
-      or as a normal user with root sudo access:
-      <programlisting>
-curl https://dl.2ndquadrant.com/default/snapshot/get/9.6/rpm | sudo bash</programlisting>
-    </para>
-    <para>
-      Alternatively you can browse the repository here:
-      <ulink url="https://dl.2ndquadrant.com/default/snapshot/browse/">https://dl.2ndquadrant.com/default/snapshot/browse/</ulink>.
-    </para>
-    <para>
-      Once the repository is installed, installing or updating &repmgr; will result in the latest snapshot
-      package being installed.
-    </para>
-    <para>
-      The package name will be formatted like this:
-      <programlisting>
-repmgr96-4.1.1-0.0git320.g5113ab0.1.el7.x86_64.rpm</programlisting>
-      containg the snapshot build number (here: <literal>320</literal>) and the hash
-      of the <application>git</application> commit it was built from (here: <literal>g5113ab0</literal>).
-    </para>
-
-    <para>
-      Note that the next formal release (in the above example <literal>4.1.1</literal>), once available,
-      will install in place of any snapshot builds.
-    </para>
-
-  </sect1>
-
-  <sect1 id="packages-old-versions" xreflabel="Installing old package versions">
-    <title>Installing old package versions</title>
-    <indexterm>
-      <primary>old packages</primary>
-    </indexterm>
-    <indexterm>
-      <primary>packages</primary>
-      <secondary>old versions</secondary>
-    </indexterm>
-
-    <sect2 id="packages-old-versions-debian" xreflabel="old Debian package versions">
-      <title>Debian/Ubuntu</title>
-      <para>
-        An archive of old packages (<literal>3.3.2</literal> and later) for Debian/Ubuntu-based systems is available here:
-        <ulink url="http://atalia.postgresql.org/morgue/r/repmgr/">http://atalia.postgresql.org/morgue/r/repmgr/</ulink>
-      </para>
-    </sect2>
-
-    <sect2 id="packages-old-versions-rhel-centos" xreflabel="old RHEL/CentOS package versions">
-      <title>RHEL/CentOS</title>
-      <para>
-        Old RPM packages (<literal>3.2</literal> and later) can be retrieved from the
-        (deprecated) 2ndQuadrant repository at
-        <ulink url="http://packages.2ndquadrant.com/">http://packages.2ndquadrant.com/</ulink>
-        by installing the appropriate repository RPM:
-      </para>
-
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <ulink url="http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-fedora-1.0-1.noarch.rpm">http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-fedora-1.0-1.noarch.rpm</ulink>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <ulink url="http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm">http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm</ulink>
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-
-      <para>
-        Old versions can be located with e.g.:
-        <programlisting>
-          yum --showduplicates list repmgr96</programlisting>
-        (substitute the appropriate package name; see <xref linkend="packages-centos">) and installed with:
-        <programlisting>
-          yum install {package_name}-{version}</programlisting>
-        where <literal>{package_name}</literal> is the base package name (e.g. <literal>repmgr96</literal>)
-        and <literal>{version}</literal> is the version listed by the
-        <command> yum --showduplicates list ...</command> command, e.g. <literal>4.0.6-1.rhel6</literal>.
-      </para>
-      <para>For example:
-        <programlisting>
-          yum install repmgr96-4.0.6-1.rhel6</programlisting>
-      </para>
-
-    </sect2>
-  </sect1>
-
-
-  <sect1 id="packages-packager-info" xreflabel="Information for packagers">
-    <title>Information for packagers</title>
-    <indexterm>
-      <primary>packages</primary>
-      <secondary>information for packagers</secondary>
-    </indexterm>
-    <para>
-      We recommend patching the following parameters when
-      building the package as built-in default values for user convenience.
-      These values can nevertheless be overridden by the user, if desired.
-    </para>
-    <itemizedlist>
-      <listitem>
-        <para>
-          Configuration file location: the default configuration file location
-          can be hard-coded by patching <varname>package_conf_file</varname>
-          in <filename>configfile.c</filename>:
-          <programlisting>
-		/* packagers: if feasible, patch configuration file path into "package_conf_file" */
-		char		package_conf_file[MAXPGPATH] = "";</programlisting>
-        </para>
-        <para>
-          See also: <xref linkend="configuration-file">
-        </para>
-      </listitem>
-
-      <listitem>
-        <para>
-          PID file location: the default <application>repmgrd</application> PID file
-          location can be hard-coded by patching <varname>package_pid_file</varname>
-          in <filename>repmgrd.c</filename>:
-          <programlisting>
-		/* packagers: if feasible, patch PID file path into "package_pid_file" */
-		char		package_pid_file[MAXPGPATH] = "";</programlisting>
-        </para>
-        <para>
-          See also: <xref linkend="repmgrd-pid-file">
-        </para>
-      </listitem>
-
-    </itemizedlist>
-  </sect1>
 </appendix>

doc/appendix-release-notes.sgml

@@ -15,757 +15,9 @@
     See also: <xref linkend="upgrading-repmgr">
   </para>
 
-  <sect1 id="release-4.1.1">
-    <title>Release 4.1.1</title>
-    <para><emphasis>Wed September 5, 2018</emphasis></para>
-    <para>
-      repmgr 4.1.1 contains a number of usability enhancements and bug fixes.
-    </para>
-    <para>
-	  We recommend upgrading to this version as soon as possible.
-	  This release can be installed as a simple package upgrade from repmgr 4.0 ~ 4.1.0;
-      <application>repmgrd</application> (if running) should be restarted.
-      See <xref linkend="upgrading-repmgr"> for more details.
-	</para>
-
-    <sect2>
-      <title>repmgr enhancements</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-standby-switchover">repmgr standby switchover --dry-run</link></command>
-              no longer copies external configuration files to test they can be copied; this avoids making
-              any changes to the target system. (GitHub #491).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-cluster-cleanup">repmgr cluster cleanup</link></command>:
-              add <literal>cluster_cleanup</literal> event. (GitHub #492).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-standby-switchover">repmgr standby switchover</link></command>:
-              improve detection of free walsenders. (GitHub #495).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Improve messages emitted during
-              <command><link linkend="repmgr-standby-promote">repmgr standby promote</link></command>.
-            </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-   </sect2>
-
-
-    <sect2>
-      <title>repmgrd enhancements</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              Always reopen the log file after
-              receiving <literal>SIGHUP</literal>. Previously this only happened if
-              a configuration file change was detected.
-              (GitHub #485).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Report version number <emphasis>after</emphasis>
-              logger initialisation. (GitHub #487).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Improve cascaded standby failover handling. (GitHub #480).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Improve reconnection handling after brief network outages; if
-              monitoring data being collected, this could lead to orphaned
-              sessions on the primary. (GitHub #480).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Check <varname>promote_command</varname> and <varname>follow_command</varname>
-              are defined when reloading configuration. These were checked on startup but
-              not reload by <application>repmgrd</application>, which made it possible to
-              make <application>repmgrd</application> with invalid values. It's unlikely
-              anyone would want to do this, but we should make it impossible anyway.
-              (GitHub #486).
-            </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-    <sect2>
-      <title>Other</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              Text of any failed queries will now be logged as <literal>ERROR</literal> to assist
-              logfile analysis at log levels higher than <literal>DEBUG</literal>.
-              (GitHub #498).
-            </para>
-          </listitem>
-        </itemizedlist>
-      </para>
-    </sect2>
-
-    <sect2>
-      <title>Bug fixes</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-node-rejoin">repmgr node rejoin</link></command>:
-              remove new upstream's replication slot if it still exists on the rejoined
-              standby. (GitHub #499).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: fix startup on witness node when local data is stale. (GitHub #488, #489).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Truncate version string reported by PostgreSQL if necessary; some
-              distributions insert additional detail after the actual version.
-              (GitHub #490).
-            </para>
-          </listitem>
-
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-
-  </sect1>
-
-
-
-  <sect1 id="release-4.1.0">
-    <title>Release 4.1.0</title>
-    <para><emphasis>Tue July 31, 2018</emphasis></para>
-    <para>
-      &repmgr; 4.1.0 introduces some changes to <application>repmgrd</application>
-      behaviour and some additional configuration parameters.
-    </para>
-    <para>
-      This release can be installed as a simple package upgrade from repmgr 4.0 ~ 4.0.6.
-      The following post-upgrade steps must be carried out:
-
-       <itemizedlist>
-          <listitem>
-            <para>
-              Execute <command>ALTER EXTENSION repmgr UPDATE</command>
-              on the primary server in the database where &repmgr; is installed.
-            </para>
-          </listitem>
-          <listitem>
-            <para>
-              <application>repmgrd</application> must be restarted on all nodes where it is running.
-            </para>
-          </listitem>
-
-       </itemizedlist>
-
-       A restart of the PostgreSQL server is <emphasis>not</emphasis> required
-       for this release (unless upgrading from repmgr 3.x).
-    </para>
-    <para>
-       See <xref linkend="upgrading-repmgr-extension"> for more details.
-    </para>
-
-    <para>
-      Configuration changes are backwards-compatible and no changes to
-      <filename>repmgr.conf</filename> are required. However users should
-      review the changes listed below.
-    </para>
-
-    <note>
-      <para>
-        <emphasis>Repository changes</emphasis>
-      </para>
-      <para>
-        Coinciding with this release, the 2ndQuadrant repository structure has changed.
-        See section <xref linkend="installation-packages"> for details, particularly
-        if you are using a RPM-based system.
-      </para>
-    </note>
-
-    <sect2>
-      <title>Configuration file changes</title>
-
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              Default for <xref linkend="repmgr-conf-log-level"> is now <option>INFO</option>.
-              This produces additional informative log output, without creating excessive additional
-              log file volume, and matches the setting assumed for examples in the documentation.
-              (GitHub #470).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <varname>recovery_min_apply_delay</varname> now accepts a minimum value
-              of <literal>zero</literal> (GitHub #448).
-            </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-
-    </sect2>
-
-
-    <sect2>
-      <title>repmgr enhancements</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              <application>repmgr</application>: always exit with an error if an unrecognised
-              command line option is provided. This matches the behaviour of other PostgreSQL
-              utilities such as <application>psql</application>. (GitHub #464).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgr</application>: add <option>-q/--quiet</option> option to suppress non-error
-              output. (GitHub #468).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-cluster-show">repmgr cluster show</link></command>,
-              <command><link linkend="repmgr-node-check">repmgr node check</link></command> and
-              <command><link linkend="repmgr-node-status">repmgr node status</link></command>
-              return non-zero exit code if node status issues detected. (GitHub #456).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Add <option>--csv</option> output option for
-              <command><link linkend="repmgr-cluster-event">repmgr cluster event</link></command>.
-              (GitHub #471).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-witness-unregister">repmgr witness unregister</link></command>
-			  can be run on any node, by providing the ID of the witness node with <option>--node-id</option>.
-			  (GitHub #472).
-			</para>
-		  </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-standby-switchover">repmgr standby switchover</link></command>
-              will refuse to run if an exclusive backup is taking place on the current primary.
-			  (GitHub #476).
-			</para>
-		  </listitem>
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-    <sect2>
-      <title>repmgrd enhancements</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: create a PID file by default
-              (GitHub #457). For details, see <xref linkend="repmgrd-pid-file">.
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: daemonize process by default.
-			  In case, for whatever reason, the user does not wish to daemonize the
-			  process, provide <option>--daemonize=false</option>.
-			  (GitHub #458).
-            </para>
-          </listitem>
-
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-
-    <sect2>
-      <title>Bug fixes</title>
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-standby-register">repmgr standby register --wait-sync</link></command>:
-              fix behaviour when no timeout provided.
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-cluster-cleanup">repmgr cluster cleanup</link></command>:
-			  add missing help options. (GitHub #461/#462).
-			</para>
-		  </listitem>
-
-          <listitem>
-            <para>
-			  Ensure witness node follows new primary after switchover. (GitHub #453).
-			</para>
-		  </listitem>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-node-check">repmgr node check</link></command> and
-              <command><link linkend="repmgr-node-status">repmgr node status</link></command>:
-			  fix witness node handling. (GitHub #451).
-			</para>
-		  </listitem>
-
-          <listitem>
-            <para>
-              When using <command><link linkend="repmgr-standby-clone">repmgr standby clone</link></command>
-              with <option>--recovery-conf-only</option> and replication slots, ensure
-              <varname>primary_slot_name</varname> is set correctly. (GitHub #474).
-            </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-  </sect1>
-
-  <sect1 id="release-4.0.6">
-    <title>Release 4.0.6</title>
-    <para><emphasis>Thu June 14, 2018</emphasis></para>
-    <para>
-	  &repmgr; 4.0.6 contains a number of bug fixes and usability enhancements.
-    </para>
-	<para>
-	  We recommend upgrading to this version as soon as possible.
-	  This release can be installed as a simple package upgrade from repmgr 4.0 ~ 4.0.5;
-      <application>repmgrd</application> (if running) should be restarted. See <xref linkend="upgrading-repmgr">
-      for more details.
-	</para>
-
-    <sect2>
-      <title>Usability enhancements</title>
-
-      <para>
-        <itemizedlist>
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-cluster-crosscheck">repmgr cluster crosscheck</link></command> and
-              <command><link linkend="repmgr-cluster-matrix">repmgr cluster matrix</link></command>:
-              return non-zero exit code if node connection issues detected (GitHub #447)
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-               <command><link linkend="repmgr-standby-clone">repmgr standby clone</link></command>:
-			   Improve handling of external configuration file copying,  including consideration in
-			   <option>--dry-run</option> check
-			   (GitHub #443)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              When using <option>--dry-run</option>, force log level to <literal>INFO</literal>
-			  to ensure output will always be displayed
-			  (GitHub #441)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-               <command><link linkend="repmgr-standby-clone">repmgr standby clone</link></command>:
-			   Improve documentation of <option>--recovery-conf-only</option> mode
-			   (GitHub #438)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-               <command><link linkend="repmgr-standby-clone">repmgr standby clone</link></command>:
-			   Don't require presence of <varname>user</varname> parameter in conninfo string
-			   (GitHub #437)
-           </para>
-          </listitem>
-
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-    <sect2>
-      <title>Bug fixes</title>
-      <para>
-
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              <command><link linkend="repmgr-witness-register">repmgr witness register</link></command>:
-              prevent registration of a witness server with the same name as an existing node
-           </para>
-          </listitem>
-
-
-          <listitem>
-            <para>
-               <command><link linkend="repmgr-standby-follow">repmgr standby follow</link></command>:
-			   check node has actually connected to new primary before reporting success
-			   (GitHub #444)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-               <command><link linkend="repmgr-node-rejoin">repmgr node rejoin</link></command>:
-			   Fix bug when parsing <option>--config-files</option> parameter
-			   (GitHub #442)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: ensure local node is counted as quorum member
-			  (GitHub #439)
-           </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-    </sect2>
-
-  </sect1>
-
-  <sect1 id="release-4.0.5">
-    <title>Release 4.0.5</title>
-    <para><emphasis>Wed May 2, 2018</emphasis></para>
-    <para>
-      &repmgr; 4.0.5 contains a number of usability enhancements related to
-      <application>pg_rewind</application> usage, <filename>recovery.conf</filename>
-      generation and (in <application>repmgrd</application>) handling of various
-      corner-case situations, as well as a number of bug fixes.
-    </para>
-
-    <sect2>
-      <title>Usability enhancements</title>
-
-      <para>
-        <itemizedlist>
-          <listitem>
-            <para>
-              Various documentation improvements, with particular emphasis on
-              the importance of setting appropriate <link linkend="configuration-file-service-commands">service commands</link>
-              instead of relying on <application>pg_ctl</application>.
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Poll demoted primary after restart as a standby during a switchover operation (GitHub #408).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Add configuration parameter <option>config_directory</option> (GitHub #424).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Add sanity check if <option>--upstream-node-id</option> not supplied when executing
-              <xref linkend="repmgr-standby-register"> (GitHub #395).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Enable <link linkend="repmgr-node-rejoin-pg-rewind">pg_rewind</link> to be used with
-              PostgreSQL 9.3/9.4 (GitHub #413).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              When generating replication connection strings, set <literal>dbname=replication</literal>
-              if appropriate (GitHub #421).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Enable provision of <option>archive_cleanup_command</option> in <filename>recovery.conf</filename>
-              (GitHub #416).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Actively check for node to <link linkend="repmgr-node-rejoin">rejoin</link> cluster (GitHub #415).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: set <literal>connect_timeout=2</literal> (if not explicitly set)
-              when pinging a server.
-           </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-
-    </sect2>
-
-   <sect2>
-      <title>Bug fixes</title>
-      <para>
-
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              Fix display of conninfo parsing error messages.
-           </para>
-          </listitem>
-
-
-          <listitem>
-            <para>
-              Fix minimum accepted value for <varname>degraded_monitoring_timeout</varname> (GitHub #411).
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Fix superuser password handling (GitHub #400)
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Fix parsing of <varname>archive_ready_critical</varname> configuration file parameter (GitHub #426).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              Fix <command><link linkend="repmgr-cluster-crosscheck">repmgr cluster crosscheck</link></command>
-              output (GitHub #389)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-               Fix memory leaks in witness code (GitHub #402).
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: handle <command>pg_ctl promote</command> timeout (GitHub #425).
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: handle failover situation with only two nodes in the primary
-          location, and at least one node in another location (GitHub #407).
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-               <application>repmgrd</application>: prevent standby connection handle from going stale.
-           </para>
-          </listitem>
-
-
-
-        </itemizedlist>
-      </para>
-   </sect2>
-
-  </sect1>
-
-
-  <sect1 id="release-4.0.4">
-    <title>Release 4.0.4</title>
-    <para><emphasis>Fri Mar 9, 2018</emphasis></para>
-
-    <para>
-      &repmgr; 4.0.4 contains some bug fixes and and a number of
-      usability enhancements related to logging/diagnostics,
-      event notifications and pre-action checks.
-    </para>
-    <para>
-      This release can be installed as a simple package upgrade from repmgr 4.0 ~ 4.0.3;
-      <application>repmgrd</application> (if running) should be restarted. See <xref linkend="upgrading-repmgr">
-      for more details.
-    </para>
-
-    <note>
-      <para>
-        It is not possible to perform a switchover where the demotion candidate is
-        running &repmgr; 4.0.2 or lower; all nodes should be upgraded to the latest version (4.0.4).
-        This is due to additional checks introduced in 4.0.3 which require the presence of
-        4.0.3 or later versions on all nodes.
-      </para>
-    </note>
-
-    <sect2>
-      <title>Usability enhancements</title>
-
-      <para>
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              add <command><link linkend="repmgr-standby-clone">repmgr standby clone --recovery-conf-only</link></command>
-              option to enable integration of a standby cloned from another source into a &repmgr; cluster (GitHub #382)
-            </para>
-          </listitem>
-
-         <listitem>
-            <para>
-              remove restriction on using replication slots when cloning from a Barman server (GitHub #379)
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              make <command><link linkend="repmgr-standby-promote">repmgr standby promote</link></command>
-              timeout values configurable (GitHub #387)
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              add missing options to main <literal>--help</literal> output (GitHub #391, #392)
-            </para>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-
-    </sect2>
-
-    <sect2>
-      <title>Bug fixes</title>
-      <para>
-
-        <itemizedlist>
-
-          <listitem>
-            <para>
-              ensure <command><link linkend="repmgr-node-rejoin">repmgr node rejoin</link></command>
-              honours the <option>--dry-run</option> option (GitHub #383)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              improve replication slot warnings generated by
-              <command><link linkend="repmgr-node-status">repmgr node status</link></command>
-              (GitHub #385)
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              fix --superuser handling when cloning a standby (GitHub #380)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: improve detection of status change from primary to
-              standby
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>:  improve reconnection to the local node after a
-              failover (previously a connection error due to the node starting up was being
-              interpreted as the node being unavailable)
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: when running on a witness server, correctly connect
-              to new primary after a failover
-           </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              <application>repmgrd</application>: add <link linkend="event-notifications">event notification</link>
-              <literal>repmgrd_shutdown</literal> (GitHub #393)
-           </para>
-          </listitem>
-
-        </itemizedlist>
-
-      </para>
-    </sect2>
-
-  </sect1>
-
   <sect1 id="release-4.0.3">
     <title>Release 4.0.3</title>
-    <para><emphasis>Thu Feb 15, 2018</emphasis></para>
+    <para><emphasis>??? Feb ??, 2018</emphasis></para>
 
     <para>
       &repmgr; 4.0.3 contains some bug fixes and and a number of
@@ -773,18 +25,6 @@
       event notifications and pre-action checks.
     </para>
 
-    <para>
-      This release can be installed as a simple package upgrade from repmgr 4.0 ~ 4.0.2;
-      repmgrd (if running) should be restarted.
-    </para>
-    <note>
-      <para>
-        It is not possible to perform a switchover where the demotion candidate is
-        running &repmgr; 4.0.2 or lower; all nodes should be upgraded to 4.0.3. This is due
-        to additional checks introduced in 4.0.3 which require the presence of
-        4.0.3 or later versions on all nodes.
-      </para>
-    </note>
     <sect2>
       <title>Usability enhancements</title>
 
@@ -825,24 +65,16 @@
           <listitem>
             <para>
               add --dry-run mode to <command><link linkend="repmgr-standby-switchover">repmgr standby follow</link></command>
-              (GitHub #368)
+              (GitHub #369)
             </para>
           </listitem>
 
           <listitem>
             <para>
-              provide information about the primary node for
-              <command><link linkend="repmgr-standby-register">repmgr standby register</link></command> and
-              <command><link linkend="repmgr-standby-follow">repmgr standby follow</link></command> event notifications (GitHub #375)
-            </para>
-          </listitem>
-
-          <listitem>
-            <para>
-              add <literal>standby_register_sync</literal> <link linkend="event-notifications">event notification</link>, which is fired when
+              add <literal>standby_register_sync</literal> event notification, which is fired when
               <command><link linkend="repmgr-standby-register">repmgr standby register</link></command>
               is run with the <option>--wait-sync</option> option and the new or updated standby node
-              record has synchronised to the standby (GitHub #374)
+              record has synchronised to the standy (GitHub #374)
             </para>
           </listitem>
 

doc/appendix-signatures.sgml

@@ -5,14 +5,14 @@
    <title>repmgr source code signing key</title>
    <para>
      The signing key ID used for <application>repmgr</application> source code bundles is:
-     <ulink url="https://repmgr.org/download/SOURCE-GPG-KEY-repmgr">
+     <ulink url="http://packages.2ndquadrant.com/repmgr/SOURCE-GPG-KEY-repmgr">
        <literal>0x297F1DCC</literal></ulink>.
    </para>
 
    <para>
      To download the <application>repmgr</application> source key to your computer:
      <programlisting>
-       curl -s https://repmgr.org/download/SOURCE-GPG-KEY-repmgr | gpg --import
+       curl -s http://packages.2ndquadrant.com/repmgr/SOURCE-GPG-KEY-repmgr | gpg --import
        gpg --fingerprint 0x297F1DCC
      </programlisting>
      then verify that the fingerprint is the expected value:
@@ -33,5 +33,34 @@
 
  </sect1>
 
+ <sect1 id="repmgr-rpm-key" xreflabel="repmgr rpm key">
+   <title>repmgr RPM signing key</title>
+   <para>
+     The signing key ID used for <application>repmgr</application> source code bundles is:
+     <ulink url="http://packages.2ndquadrant.com/repmgr/RPM-GPG-KEY-repmgr">
+       <literal>0x702D883A</literal></ulink>.
+   </para>
+
+   <para>
+     To download the <application>repmgr</application> source key to your computer:
+     <programlisting>
+       curl -s http://packages.2ndquadrant.com/repmgr/RPM-GPG-KEY-repmgr | gpg --import
+       gpg --fingerprint 0x702D883A
+     </programlisting>
+     then verify that the fingerprint is the expected value:
+     <programlisting>
+       AE4E 390E A58E 0037 6148  3F29 888D 018B 702D 883A</programlisting>
+   </para>
+
+   <para>
+     To check a repository RPM, use <application>rpmkeys</application> to load the
+      packaging signing key into the RPM database then use <literal>rpm -K</literal>, e.g.:
+     <programlisting>
+       sudo rpmkeys --import http://packages.2ndquadrant.com/repmgr/RPM-GPG-KEY-repmgr
+       rpm -K postgresql-bdr94-2ndquadrant-redhat-1.0-2.noarch.rpm
+     </programlisting>
+   </para>
+
+ </sect1>
 
 </appendix>

doc/cloning-standbys.sgml

@@ -51,7 +51,7 @@
    </itemizedlist>
    </para>
 
-  <sect2 id="cloning-from-barman-prerequisites">
+  <sect2 id="cloning-from-barman-prerequisites" xreflabel="Prerequisites for cloning from Barman">
    <title>Prerequisites for cloning from Barman</title>
    <para>
     In order to enable Barman support for <command>repmgr standby clone</command>, following
@@ -356,7 +356,7 @@
      By default, <command>pg_basebackup</command> performs a checkpoint before beginning the backup
      process. However, a normal checkpoint may take some time to complete;
      a fast checkpoint can be forced with the <literal>-c/--fast-checkpoint</literal> option.
-     Note that this may impact performance of the server being cloned from (typically the primary)
+     However this may impact performance of the server being cloned from (typically the primary)
      so should be used with care.
     </para>
     <tip>
@@ -384,16 +384,11 @@
 
    <sect2 id="cloning-advanced-managing-passwords" xreflabel="Managing passwords">
     <title>Managing passwords</title>
-    <indexterm>
-      <primary>cloning</primary>
-      <secondary>using passwords</secondary>
-    </indexterm>
-
     <para>
      If replication connections to a standby's upstream server are password-protected,
-     the standby must be able to provide the password so it can begin streaming replication.
+     the standby must be able to provide the password so it can begin streaming
+     replication.
     </para>
-
     <para>
      The recommended way to do this is to store the password in the <literal>postgres</literal> system
      user's <filename>~/.pgpass</filename> file. It's also possible to store the password in the
@@ -401,17 +396,6 @@
      security reasons. For more details see the
      <ulink url="https://www.postgresql.org/docs/current/static/libpq-pgpass.html">PostgreSQL password file documentation</ulink>.
     </para>
-
-    <note>
-      <para>
-        If using a <filename>pgpass</filename> file, an entry for the replication user (by default the
-        user who connects to the <literal>repmgr</literal> database) <emphasis>must</emphasis>
-        be provided, with database name set to <literal>replication</literal>, e.g.:
-        <programlisting>
-          node1:5432:replication:repmgr:12345</programlisting>
-      </para>
-    </note>
-
     <para>
      If, for whatever reason, you wish to include the password in <filename>recovery.conf</filename>,
      set <varname>use_primary_conninfo_password</varname> to <literal>true</literal> in
@@ -423,7 +407,8 @@
     </para>
     <para>
      It is of course also possible to include the password value in the <varname>conninfo</varname>
-     string for each node, but this is obviously a security risk and should be avoided.
+     string for each node, but this is obviously a security risk and should be
+     avoided.
     </para>
     <para>
       From PostgreSQL 9.6, <application>libpq</application> supports the <varname>passfile</varname>

doc/configuration-file-log-settings.sgml

@@ -1,107 +0,0 @@
-<sect1 id="configuration-file-log-settings" xreflabel="log settings">
-  <indexterm>
-    <primary>repmgr.conf</primary>
-    <secondary>log settings</secondary>
-  </indexterm>
-  <indexterm>
-    <primary>log settings</primary>
-    <secondary>configuration in repmgr.conf</secondary>
-  </indexterm>
-  <title>Log settings</title>
-
-  <para>
-    By default, &repmgr; and <application>repmgrd</application> write log output to
-    <literal>STDERR</literal>. An alternative log destination can be specified
-    (either a file or <literal>syslog</literal>).
-  </para>
-
-  <note>
-    <para>
-      The &repmgr; application itself will continue to write log output to <literal>STDERR</literal>
-      even if another log destination is configured, as otherwise any output resulting from a command
-      line operation will "disappear" into the log.
-    </para>
-    <para>
-      This behaviour can be overriden with the command line option <option>--log-to-file</option>,
-      which will redirect all logging output to the configured log destination. This is recommended
-      when &repmgr; is executed by another application, particularly <application>repmgrd</application>,
-      to enable log output generated by the &repmgr; application to be stored for later reference.
-    </para>
-  </note>
-
-  <variablelist>
-
-   <varlistentry id="repmgr-conf-log-level" xreflabel="log_level">
-    <term><varname>log_level</varname> (<type>string</type>)
-     <indexterm>
-      <primary><varname>log_level</varname> configuration file parameter</primary>
-     </indexterm>
-    </term>
-    <listitem>
-     <para>
-       One of <option>DEBUG</option>, <option>INFO</option>, <option>NOTICE</option>,
-       <option>WARNING</option>, <option>ERROR</option>, <option>ALERT</option>, <option>CRIT</option>
-       or <option>EMERG</option>.
-     </para>
-     <para>
-       Default is <option>INFO</option>.
-     </para>
-     <para>
-       Note that <option>DEBUG</option> will produce a substantial amount of log output
-       and should not be enabled in normal use.
-     </para>
-    </listitem>
-   </varlistentry>
-
-   <varlistentry id="repmgr-conf-log-facility" xreflabel="log_facility">
-    <term><varname>log_facility</varname> (<type>string</type>)
-     <indexterm>
-      <primary><varname>log_facility</varname> configuration file parameter</primary>
-     </indexterm>
-    </term>
-    <listitem>
-     <para>
-       Logging facility: possible values are <option>STDERR</option> (default), or for
-       syslog integration, one of <option>LOCAL0</option>, <option>LOCAL1</option>, <option>...</option>,
-       <option>LOCAL7</option>, <option>USER</option>.
-     </para>
-    </listitem>
-   </varlistentry>
-
-   <varlistentry id="repmgr-conf-log-file" xreflabel="log_file">
-    <term><varname>log_file</varname> (<type>string</type>)
-     <indexterm>
-      <primary><varname>log_file</varname> configuration file parameter</primary>
-     </indexterm>
-    </term>
-    <listitem>
-     <para>
-       If <xref linkend="repmgr-conf-log-facility"> is set to <option>STDERR</option>, log output
-       can be redirected to the specified file.
-     </para>
-     <para>
-       See <xref linkend="repmgrd-log-rotation"> for information on configuring log rotation.
-     </para>
-    </listitem>
-   </varlistentry>
-
-   <varlistentry id="repmgr-conf-log-status-interval" xreflabel="log_status_interval">
-    <term><varname>log_status_interval</varname> (<type>integer</type>)
-     <indexterm>
-      <primary><varname>log_status_interval</varname> configuration file parameter</primary>
-     </indexterm>
-    </term>
-    <listitem>
-     <para>
-       This setting causes <application>repmgrd</application> to emit a status log
-       line at the specified interval (in seconds, default <literal>300</literal>)
-       describing <application>repmgrd</application>'s current state, e.g.:
-     </para>
-     <programlisting>
-      [2018-07-12 00:47:32] [INFO] monitoring connection to upstream node "node1" (node ID: 1)</programlisting>
-    </listitem>
-   </varlistentry>
-
-  </variablelist>
-
-</sect1>

doc/configuration-file-service-commands.sgml

@@ -1,130 +0,0 @@
-<sect1 id="configuration-file-service-commands" xreflabel="service command settings">
-  <indexterm>
-    <primary>repmgr.conf</primary>
-    <secondary>service command settings</secondary>
-  </indexterm>
-  <indexterm>
-    <primary>service command settings</primary>
-    <secondary>configuration in repmgr.conf</secondary>
-  </indexterm>
-  <title>Service command settings</title>
-
-  <para>
-    In some circumstances, &repmgr; (and <application>repmgrd</application>) need to
-    be able to stop, start or restart PostgreSQL. &repmgr; commands which need to do this
-    include <link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>,
-    <link linkend="repmgr-standby-switchover"><command>repmgr standby switchover</command></link> and
-    <link linkend="repmgr-node-rejoin"><command>repmgr node rejoin</command></link>.
-  </para>
-  <para>
-    By default, &repmgr; will use PostgreSQL's <command>pg_ctl</command> utility to control the PostgreSQL
-    server. However this can lead to various problems, particularly when PostgreSQL has been
-    installed from packages, and especially so if <application>systemd</application> is in use.
-  </para>
-
-
-  <note>
-    <para>
-      If using <application>systemd</application>, ensure you have <varname>RemoveIPC</varname> set to <literal>off</literal>.
-      See the <ulink url="https://wiki.postgresql.org/wiki/Systemd">systemd</ulink>
-      entry in the <ulink url="https://wiki.postgresql.org/wiki/Main_Page">PostgreSQL wiki</ulink> for details.
-    </para>
-  </note>
-
-
-  <para>
-    With this in mind, we recommend to <emphasis>always</emphasis> configure &repmgr; to use the
-    available system service commands.
-  </para>
-
-  <para>
-    To do this, specify the appropriate command for each action
-    in <filename>repmgr.conf</filename> using the following configuration
-    parameters:
-    <programlisting>
-    service_start_command
-    service_stop_command
-    service_restart_command
-    service_reload_command</programlisting>
-  </para>
-
-  <note>
-    <para>
-      &repmgr; will not apply <option>pg_bindir</option> when executing any of these commands;
-      these can be user-defined scripts so must always be specified with the full path.
-    </para>
-  </note>
-
-  <note>
-    <para>
-      It's also possible to specify a <varname>service_promote_command</varname>.
-      This is intended for systems which provide a package-level promote command,
-      such as Debian's <application>pg_ctlcluster</application>, to promote the
-      PostgreSQL from standby to primary.
-    </para>
-    <para>
-      If your packaging system does not provide such a command, it can be left empty,
-      and &repmgr; will generate the appropriate `pg_ctl ... promote` command.
-    </para>
-    <para>
-      Do not confuse this with <varname>promote_command</varname>, which is used
-      by <application>repmgrd</application> to execute <xref linkend="repmgr-standby-promote">.
-    </para>
-  </note>
-
-  <para>
-    To confirm which command &repmgr; will execute for each action, use
-    <command>repmgr node service --list --action=...</command>, e.g.:
-    <programlisting>
-      repmgr -f /etc/repmgr.conf node service --list --action=stop
-      repmgr -f /etc/repmgr.conf node service --list --action=start
-      repmgr -f /etc/repmgr.conf node service --list --action=restart
-      repmgr -f /etc/repmgr.conf node service --list --action=reload</programlisting>
-  </para>
-
-  <para>
-     These commands will be executed by the system user which &repmgr; runs as (usually <literal>postgres</literal>)
-     and will probably require passwordless sudo access to be able to execute the command.
-  </para>
-  <para>
-    For example, using <application>systemd</application> on CentOS 7, the service commands can be
-    set as follows:
-    <programlisting>
-      service_start_command   = 'sudo systemctl start postgresql-9.6'
-      service_stop_command    = 'sudo systemctl stop postgresql-9.6'
-      service_restart_command = 'sudo systemctl restart postgresql-9.6'
-      service_reload_command  = 'sudo systemctl reload postgresql-9.6'</programlisting>
-    and <filename>/etc/sudoers</filename> should be set as follows:
-    <programlisting>
-      Defaults:postgres !requiretty
-      postgres ALL = NOPASSWD: /usr/bin/systemctl stop postgresql-9.6, \
-        /usr/bin/systemctl start postgresql-9.6, \
-        /usr/bin/systemctl restart postgresql-9.6, \
-        /usr/bin/systemctl reload postgresql-9.6</programlisting>
-  </para>
-
-  <important>
-    <indexterm>
-      <primary>pg_ctlcluster</primary>
-      <secondary>service command settings</secondary>
-    </indexterm>
-    <para>
-      Debian/Ubuntu users: instead of calling <command>sudo systemctl</command> directly, use
-      <command>sudo pg_ctlcluster</command>, e.g.:
-    <programlisting>
-      service_start_command   = 'sudo pg_ctlcluster 9.6 main start'
-      service_stop_command    = 'sudo pg_ctlcluster 9.6 main stop'
-      service_restart_command = 'sudo pg_ctlcluster 9.6 main restart'
-      service_reload_command  = 'sudo pg_ctlcluster 9.6 main reload'</programlisting>
-      and set <filename>/etc/sudoers</filename> accordingly.
-    </para>
-    <para>
-      While <command>pg_ctlcluster</command> will work when executed as user <literal>postgres</literal>,
-      it's strongly recommended to use <command>sudo pg_ctlcluster</command> on <application>systemd</application>
-      systems, to ensure <application>systemd</application> has a correct picture of
-      the PostgreSQL application state.
-    </para>
-
-  </important>
-
-</sect1>

doc/configuration-file-settings.sgml

@@ -1,10 +1,10 @@
-<sect1 id="configuration-file-settings" xreflabel="required configuration file settings">
+<sect1 id="configuration-file-settings" xreflabel="configuration file settings">
   <indexterm>
     <primary>repmgr.conf</primary>
-    <secondary>required settings</secondary>
+    <secondary>settings</secondary>
   </indexterm>
 
- <title>Required configuration file settings</title>
+ <title>Configuration file settings</title>
  <para>
    Each <filename>repmgr.conf</filename> file must contain the following parameters:
  </para>
@@ -92,10 +92,7 @@
 
   <para>
     For a full list of annotated configuration items, see the file
-    <ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink>.
-  </para>
-  <para>
-    For <application>repmgrd</application>-specific settings, see <xref linkend="repmgrd-configuration">.
+    <ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</>.
   </para>
 
   <note>

doc/configuration.sgml

@@ -2,17 +2,15 @@
   <title>repmgr configuration</title>
 
   &configuration-file;
-  &configuration-file-required-settings;
-  &configuration-file-log-settings;
-  &configuration-file-service-commands;
+  &configuration-file-settings;
 
-  <sect1 id="configuration-permissions" xreflabel="Database user permissions">
+  <sect1 id="configuration-permissions" xreflabel="User permissions">
     <indexterm>
       <primary>configuration</primary>
-      <secondary>database user permissions</secondary>
+      <secondary>user permissions</secondary>
     </indexterm>
 
-    <title>repmgr database user permissions</title>
+    <title>repmgr user permissions</title>
     <para>
       &repmgr; will create an extension database containing objects
       for administering &repmgr; metadata. The user defined in the <varname>conninfo</varname>

doc/configuring-witness-server.sgml

@@ -16,22 +16,15 @@
  <para>
    A typical use case for a witness server is a two-node streaming replication
    setup, where the primary and standby are in different locations (data centres).
-   By creating a witness server in the same location (data centre) as the primary,
-   if the primary becomes unavailable it's possible for the standby to decide whether
-   it can promote itself without risking a "split brain" scenario: if it can't see either the
+   By creating a witness server in the same location as the primary, if the primary
+   becomes unavailable  it's possible for the standby to decide whether it can
+   promote itself without risking a "split brain" scenario: if it can't see either the
    witness or the primary server, it's likely there's a network-level interruption
    and it should not promote itself. If it can seen the witness but not the primary,
    this proves there is no network interruption and the primary itself is unavailable,
    and it can therefore promote itself (and ideally take action to fence the
    former primary).
  </para>
- <note>
-   <para>
-     <emphasis>Never</emphasis> install a witness server on the same physical host
-     as another node in the replication cluster managed by &repmgr; - it's essential
-     the witness is not affected in any way by failure of another node.
-   </para>
- </note>
  <para>
    For more complex replication scenarios,e.g. with multiple datacentres, it may
    be preferable to use location-based failover, which ensures that only nodes

doc/event-notifications.sgml

@@ -147,104 +147,34 @@
  <para>
   By default, all notification types will be passed to the designated script;
   the notification types can be filtered to explicitly named ones using the
-  <varname>event_notifications</varname> parameter.
- </para>
-
- <para>
-   Events generated by the &repmgr; command:
+  <varname>event_notifications</varname> parameter:
 
   <itemizedlist spacing="compact" mark="bullet">
 
    <listitem>
-     <simpara><literal><link linkend="repmgr-primary-register-events">cluster_created</link></literal></simpara>
+    <simpara><literal>primary_register</literal></simpara>
    </listitem>
    <listitem>
-     <simpara><literal><link linkend="repmgr-primary-register-events">primary_register</link></literal></simpara>
+    <simpara><literal>primary_unregister</literal></simpara>
    </listitem>
    <listitem>
-     <simpara><literal><link linkend="repmgr-primary-unregister-events">primary_unregister</link></literal></simpara>
-   </listitem>
-
-   <listitem>
-    <simpara><literal><link linkend="repmgr-standby-clone-events">standby_clone</link></literal></simpara>
+    <simpara><literal>standby_register</literal></simpara>
    </listitem>
    <listitem>
-    <simpara><literal><link linkend="repmgr-standby-register-events">standby_register</link></literal></simpara>
+    <simpara><literal>standby_register_sync</literal></simpara>
    </listitem>
    <listitem>
-    <simpara><literal><link linkend="repmgr-standby-register-events">standby_register_sync</link></literal></simpara>
+    <simpara><literal>standby_unregister</literal></simpara>
    </listitem>
    <listitem>
-    <simpara><literal><link linkend="repmgr-standby-unregister-events">standby_unregister</link></literal></simpara>
-   </listitem>
-
-   <listitem>
-    <simpara><literal><link linkend="repmgr-standby-promote-events">standby_promote</link></literal></simpara>
+    <simpara><literal>standby_clone</literal></simpara>
    </listitem>
    <listitem>
-    <simpara><literal><link linkend="repmgr-standby-follow-events">standby_follow</link></literal></simpara>
+    <simpara><literal>standby_promote</literal></simpara>
    </listitem>
    <listitem>
-     <simpara><literal><link linkend="repmgr-standby-switchover-events">standby_switchover</link></literal></simpara>
+    <simpara><literal>standby_follow</literal></simpara>
    </listitem>
-
-   <listitem>
-     <simpara><literal><link linkend="repmgr-witness-register-events">witness_register</link></literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal><link linkend="repmgr-witness-unregister-events">witness_unregister</link></literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal><link linkend="repmgr-node-rejoin-events">node_rejoin</link></literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal><link linkend="repmgr-cluster-cleanup-events">cluster_cleanup</link></literal></simpara>
-   </listitem>
-
-  </itemizedlist>
- </para>
-
- <para>
-   Events generated by <application>repmgrd</application> (streaming replication mode):
-
-   <itemizedlist spacing="compact" mark="bullet">
-   <listitem>
-    <simpara><literal>repmgrd_start</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_shutdown</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_reload</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_failover_promote</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_failover_follow</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_failover_aborted</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_standby_reconnect</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_promote_error</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_local_disconnect</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_local_reconnect</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_upstream_disconnect</literal></simpara>
-   </listitem>
-   <listitem>
-    <simpara><literal>repmgrd_upstream_reconnect</literal></simpara>
-   </listitem>
-
    <listitem>
     <simpara><literal>standby_disconnect_manual</literal></simpara>
    </listitem>
@@ -254,13 +184,39 @@
    <listitem>
     <simpara><literal>standby_recovery</literal></simpara>
    </listitem>
-
-   </itemizedlist>
- </para>
-
-  <para>
-   Events generated by <application>repmgrd</application> (BDR mode):
-   <itemizedlist spacing="compact" mark="bullet">
+   <listitem>
+    <simpara><literal>witness_register</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>witness_unregister</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>node_rejoin</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_start</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_shutdown</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_failover_promote</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_failover_follow</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_upstream_disconnect</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_upstream_reconnect</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_promote_error</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>repmgrd_failover_promote</literal></simpara>
+   </listitem>
    <listitem>
     <simpara><literal>bdr_failover</literal></simpara>
    </listitem>

doc/filelist.sgml

@@ -38,9 +38,7 @@
 <!ENTITY quickstart      SYSTEM "quickstart.sgml">
 <!ENTITY configuration      SYSTEM "configuration.sgml">
 <!ENTITY configuration-file      SYSTEM "configuration-file.sgml">
-<!ENTITY configuration-file-required-settings      SYSTEM "configuration-file-required-settings.sgml">
-<!ENTITY configuration-file-log-settings      SYSTEM "configuration-file-log-settings.sgml">
-<!ENTITY configuration-file-service-commands   SYSTEM "configuration-file-service-commands.sgml">
+<!ENTITY configuration-file-settings      SYSTEM "configuration-file-settings.sgml">
 <!ENTITY cloning-standbys  SYSTEM "cloning-standbys.sgml">
 <!ENTITY promoting-standby  SYSTEM "promoting-standby.sgml">
 <!ENTITY follow-new-primary  SYSTEM "follow-new-primary.sgml">

doc/install-packages.sgml

@@ -5,95 +5,83 @@
   system.
  </para>
 
- <sect2 id="installation-packages-redhat" xreflabel="Installing from packages on RHEL, CentOS and Fedora">
+ <sect2 id="installation-packages-redhat" xreflabel="Installing from packages on RHEL, Fedora and CentOS">
 
   <indexterm>
    <primary>installation</primary>
-   <secondary>on Red Hat/CentOS/Fedora etc.</secondary>
+   <secondary>on Redhat/CentOS/Fedora etc.</secondary>
   </indexterm>
 
-  <title>RedHat/CentOS/Fedora</title>
+  <title>RedHat/Fedora/CentOS</title>
   <para>
-	&repmgr; RPM packages for RedHat/CentOS variants and Fedora are available from the
-	<ulink url="https://2ndquadrant.com">2ndQuadrant</ulink>
-	<ulink url="https://dl.2ndquadrant.com/">public repository</ulink>; see following
-	section for details.
-  </para>
-  <para>
-   RPM packages for &repmgr; are also available via Yum through
+   RPM packages for &repmgr; are available via Yum through
    the PostgreSQL Global Development Group RPM repository
    (<ulink url="https://yum.postgresql.org/">http://yum.postgresql.org/</ulink>).
    Follow the instructions for your distribution (RedHat, CentOS,
-   Fedora, etc.) and architecture as detailed there. Note that it can take some days
-   for new &repmgr; packages to become available via the this repository.
+   Fedora, etc.) and architecture as detailed there.
   </para>
-  <note>
-    <para>
-      &repmgr; packages are designed to be compatible with the community-provided PostgreSQL packages.
-      They may not work with vendor-specific packages such as those provided by RedHat for RHEL
-      customers, as the filesystem layout may be different to the community RPMs.
-      Please contact your support vendor for assistance.
-    </para>
-  </note>
-
   <para>
-    For more information on the package contents, including details of installation
-    paths and relevant <link linkend="configuration-file-service-commands">service commands</link>,
-    see the appendix section <xref linkend="packages-centos">.
+   <ulink url="https://2ndquadrant.com">2ndQuadrant</ulink> also provides its
+   own RPM packages which are made available
+   at the same time as each &repmgr; release, as it can take some days for
+   them to become available via the main PGDG repository. See following section for details:
   </para>
 
 
   <sect3 id="installation-packages-redhat-2ndq">
-    <title>2ndQuadrant public RPM yum repository</title>
-
+    <title>2ndQuadrant repmgr yum repository</title>
     <para>
-      Beginning with <ulink url="https://repmgr.org/docs/4.1/release-4.0.5.html">repmgr 4.0.5</ulink>,
+      Beginning with <ulink url="http://repmgr.org/release-notes-3.1.3.html">repmgr 3.1.3</ulink>,
       <ulink url="https://2ndquadrant.com/">2ndQuadrant</ulink> provides a dedicated <literal>yum</literal>
-	  <ulink url="https://dl.2ndquadrant.com/">public repository</ulink> for 2ndQuadrant software,
-	  including &repmgr;. We recommend using this for all future &repmgr; releases.
-	</para>
-	<para>
-	  General instructions for using this repository can be found on its
-	  <ulink url="https://dl.2ndquadrant.com/">homepage</ulink>. Specific instructions
-	  for installing &repmgr; follow below.
-	</para>
+      repository for &repmgr; releases. This repository complements the main
+      <ulink url="https://yum.postgresql.org/repopackages.php">PGDG community repository</ulink>,
+      but enables repmgr users to access the latest &repmgr; packages before they are
+      available via the PGDG repository, which can take several days to be updated following
+      a fresh  &repmgr; release.
+    </para>
     <para>
       <emphasis>Installation</emphasis>
 
       <itemizedlist>
-		<listitem>
-		  <para>
-			Locate the repository RPM for your PostgreSQL version from the list at:
-			<ulink url="https://dl.2ndquadrant.com/">https://dl.2ndquadrant.com/</ulink>
-		  </para>
-		</listitem>
-
         <listitem>
           <para>
-            Install the repository definition for your distribution and PostgreSQL version
-			(this enables the 2ndQuadrant repository as a source of &repmgr; packages).
-		  </para>
-		  <para>
-			For example, for PostgreSQL 10 on CentOS, execute:
-			<programlisting>
-curl https://dl.2ndquadrant.com/default/release/get/10/rpm | sudo bash</programlisting>
-		  </para>
-		  <para>
-			Verify that the repository is installed with:
-			<programlisting>
-sudo yum repolist</programlisting>
-			The output should contain two entries like this:
-			<programlisting>
-2ndquadrant-dl-default-release-pg10/7/x86_64        2ndQuadrant packages (PG10) for 7 - x86_64          4
-2ndquadrant-dl-default-release-pg10-debug/7/x86_64  2ndQuadrant packages (PG10) for 7 - x86_64 - Debug  3</programlisting>
-		  </para>
-		</listitem>
-
-        <listitem>
-          <para>
-            Install the &repmgr version appropriate for your PostgreSQL version (e.g. <literal>repmgr10</literal>):
+            Import the repository public key (optional but recommended):
             <programlisting>
-$ yum install repmgr10</programlisting>
+              rpm --import http://packages.2ndquadrant.com/repmgr/RPM-GPG-KEY-repmgr</programlisting>
+          </para>
+        </listitem>
+
+        <listitem>
+          <para>
+            Install the repository RPM for your distribution (this enables the 2ndQuadrant
+            repository as a source of repmgr packages):
+            <itemizedlist>
+              <listitem>
+                <simpara>
+                  <emphasis>Fedora:</emphasis>
+                  <ulink url="http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-fedora-1.0-1.noarch.rpm">http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-fedora-1.0-1.noarch.rpm</ulink>
+                </simpara>
+              </listitem>
+              <listitem>
+                <simpara>
+                  <emphasis>RHEL, CentOS etc:</emphasis>
+                  <ulink url="http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm">http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm</ulink>
+                </simpara>
+              </listitem>
+            </itemizedlist>
+          </para>
+          <para>
+            e.g.:
+            <programlisting>
+              $ yum install http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm</programlisting>
+          </para>
+        </listitem>
+
+        <listitem>
+          <para>
+            Install the repmgr version appropriate for your PostgreSQL version (e.g. <literal>repmgr96</literal>), e.g.:
+            <programlisting>
+              $ yum install repmgr96</programlisting>
           </para>
         </listitem>
       </itemizedlist>
@@ -103,13 +91,13 @@ $ yum install repmgr10</programlisting>
       <emphasis>Compatibility with PGDG Repositories</emphasis>
     </para>
     <para>
-      The 2ndQuadrant &repmgr; yum repository packages use the same definitions and file system layout as the
-      main PGDG repository.
+        The 2ndQuadrant &repmgr; yum repository uses exactly the same package definitions as the
+        main PGDG repository and is effectively a selective mirror for &repmgr; packages only.
     </para>
     <para>
-      Normally <application>yum</application> will prioritize the repository with the most recent &repmgr; version.
-      Once the PGDG repository has been updated, it doesn't matter which repository
-      the packages are installed from.
+        Normally yum should prioritize the repository with the most recent &repmgr; version.
+        Once the PGDG repository has been updated, it doesn't matter which repository
+        the packages are installed from.
     </para>
     <para>
       To ensure the 2ndQuadrant repository is always prioritised, install <literal>yum-plugin-priorities</literal>
@@ -123,23 +111,30 @@ $ yum install repmgr10</programlisting>
       To install a specific package version, execute <command>yum --showduplicates list</command>
       for the package in question:
       <programlisting>
-        [root@localhost ~]# yum --showduplicates list repmgr10
+        [root@localhost ~]# yum --showduplicates list repmgr96
         Loaded plugins: fastestmirror
         Loading mirror speeds from cached hostfile
          * base: ftp.iij.ad.jp
          * extras: ftp.iij.ad.jp
          * updates: ftp.iij.ad.jp
         Available Packages
-		repmgr10.x86_64                       4.0.3-1.rhel7                        pgdg10
-		repmgr10.x86_64                       4.0.4-1.rhel7                        pgdg10
-		repmgr10.x86_64                       4.0.5-1.el7                          2ndquadrant-repo-10</programlisting>
+        repmgr96.x86_64               3.2-1.el6                    2ndquadrant-repmgr
+        repmgr96.x86_64               3.2.1-1.el6                  2ndquadrant-repmgr
+        repmgr96.x86_64               3.3-1.el6                    2ndquadrant-repmgr
+        repmgr96.x86_64               3.3.1-1.el6                  2ndquadrant-repmgr
+        repmgr96.x86_64               3.3.2-1.el6                  2ndquadrant-repmgr
+        repmgr96.x86_64               3.3.2-1.rhel6                pgdg96
+        repmgr96.x86_64               4.0.0-1.el6                  2ndquadrant-repmgr
+        repmgr96.x86_64               4.0.0-1.rhel6                pgdg96</programlisting>
       then append the appropriate version number to the package name with a hyphen, e.g.:
       <programlisting>
-        [root@localhost ~]# yum install repmgr10-4.0.3-1.rhel7</programlisting>
+        [root@localhost ~]# yum install repmgr96-3.3.2-1.el6</programlisting>
     </para>
   </sect3>
  </sect2>
 
+
+
  <sect2 id="installation-packages-debian" xreflabel="Installing from packages on Debian or Ubuntu">
 
   <indexterm>
@@ -153,76 +148,6 @@ $ yum install repmgr10</programlisting>
   Instructions can be found in the APT section of the PostgreSQL Wiki
   (<ulink url="https://wiki.postgresql.org/wiki/Apt">https://wiki.postgresql.org/wiki/Apt</ulink>).
   </para>
-  <para>
-    For more information on the package contents, including details of installation
-    paths and relevant <link linkend="configuration-file-service-commands">service commands</link>,
-    see the appendix section <xref linkend="packages-debian-ubuntu">.
-  </para>
-
-  <sect3 id="installation-packages-debian-ubuntu-2ndq">
-    <title>2ndQuadrant public apt repository for Debian/Ubuntu</title>
-
-    <para>
-      Beginning with <ulink url="https://repmgr.org/docs/4.0/release-4.0.5.html">repmgr 4.0.5</ulink>,
-      <ulink url="https://2ndquadrant.com/">2ndQuadrant</ulink> provides a
-	  <ulink url="https://dl.2ndquadrant.com/">public apt repository</ulink> for 2ndQuadrant software,
-	  including &repmgr;.
-	</para>
-	<para>
-	  General instructions for using this repository can be found on its
-	  <ulink url="https://dl.2ndquadrant.com/">homepage</ulink>. Specific instructions
-	  for installing &repmgr; follow below.
-	</para>
-
-    <para>
-
-      <emphasis>Installation</emphasis>
-
-      <itemizedlist>
-
-		<listitem>
-		  <para>
-            Install the repository definition for your distribution and PostgreSQL version
-			(this enables the 2ndQuadrant repository as a source of &repmgr; packages) by executing:
-            <programlisting>
-curl https://dl.2ndquadrant.com/default/release/get/deb | sudo bash</programlisting>
-		  </para>
-          <note>
-            <para>
-              This will automatically install the following additional packages, if not already present:
-              <itemizedlist spacing="compact" mark="bullet">
-                <listitem>
-                  <simpara><literal>lsb-release</literal></simpara>
-                </listitem>
-                <listitem>
-                  <simpara><literal>apt-transport-https</literal></simpara>
-                </listitem>
-              </itemizedlist>
-            </para>
-          </note>
-        </listitem>
-
-
-		<listitem>
-		  <para>
-            Install the &repmgr version appropriate for your PostgreSQL version (e.g. <literal>repmgr10</literal>):
-            <programlisting>
-$ apt-get install postgresql-10-repmgr</programlisting>
-		  </para>
-          <note>
-            <para>
-            For packages for PostgreSQL 9.6 and earlier, the package name includes
-            a period between major and minor version numbers, e.g.
-            <literal>postgresql-9.6-repmgr</literal>.
-            </para>
-          </note>
-		</listitem>
-
-	  </itemizedlist>
-
-	</para>
-
-  </sect3>
  </sect2>
 
 </sect1>

doc/install-source.sgml

@@ -12,8 +12,8 @@
    To install &repmgr; the prerequisites for compiling
    &postgres; must be installed. These are described in &postgres;'s
    documentation
-   on <ulink url="https://www.postgresql.org/docs/current/static/install-requirements.html">build requirements</ulink>
-   and <ulink url="https://www.postgresql.org/docs/current/static/docguide-toolsets.html">build requirements for documentation</ulink>.
+   on <ulink url="https://www.postgresql.org/docs/current/install-requirements.html">build requirements</ulink>
+   and <ulink url="https://www.postgresql.org/docs/current/docguide-toolsets.html">build requirements for documentation</ulink>.
   </para>
 
   <para>
@@ -80,7 +80,7 @@
    </para>
 
    <para>
-    There are also tags for each &repmgr; release, e.g. <filename>4.0.5</filename>.
+    There are also tags for each &repmgr; release, e.g. <filename>REL4_0_STABLE</filename>.
    </para>
 
    <para>

doc/overview.sgml

@@ -2,8 +2,7 @@
  <title>repmgr overview</title>
 
  <para>
-  This chapter provides a high-level overview of &repmgr;'s components and
-  functionality.
+  This chapter provides a high-level overview of repmgr's components and functionality.
  </para>
  <sect1 id="repmgr-concepts" xreflabel="Concepts">
 

doc/quickstart.sgml

@@ -234,34 +234,17 @@
   <para>
    <filename>repmgr.conf</filename> should not be stored inside the PostgreSQL data directory,
    as it could be overwritten when setting up or reinitialising the PostgreSQL
-   server. See sections <xref linkend="configuration"> and <xref linkend="configuration-file">
+   server. See sections on <xref linkend="configuration-file"> and <xref linkend="configuration-file-settings">
    for further details about <filename>repmgr.conf</filename>.
   </para>
   <tip>
    <simpara>
     For Debian-based distributions we recommend explictly setting
-    <option>pg_bindir</option> to the directory where <command>pg_ctl</command> and other binaries
+    <literal>pg_bindir</literal> to the directory where <command>pg_ctl</command> and other binaries
     not in the standard path are located. For PostgreSQL 9.6 this would be <filename>/usr/lib/postgresql/9.6/bin/</filename>.
    </simpara>
   </tip>
 
-  <note>
-    <para>
-      &repmgr; only uses <option>pg_bindir</option> when it executes
-      PostgreSQL binaries directly.
-    </para>
-    <para>
-      For user-defined scripts such as <option>promote_command</option> and the
-      various <option>service_*_command</option>s, you <emphasis>must</emphasis>
-      always explicitly provide the full path to the binary or script being
-      executed, even if it is &repmgr; itself.
-    </para>
-    <para>
-      This is because these options can contain user-defined scripts in arbitrary
-      locations, so prepending <option>pg_bindir</option> may break them.
-    </para>
-  </note>
-
   <para>
    See the file
    <ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</>

doc/repmgr-cluster-cleanup.sgml

@@ -15,14 +15,9 @@
     <title>Description</title>
     <para>
       Purges monitoring history from the <literal>repmgr.monitoring_history</literal> table to
-      prevent excessive table growth.
-    </para>
-    <para>
-      By default <emphasis>all</emphasis> data will be removed; Use the <option>-k/--keep-history</option>
-      option to specify the number of days of monitoring history to retain.
-    </para>
-    <para>
-      This command can be executed manually or as a cronjob.
+      prevent excessive table growth. Use the <literal>-k/--keep-history</literal> to specify the
+      number of days of monitoring history to retain. This command can be used
+      manually or as a cronjob.
     </para>
   </refsect1>
 
@@ -43,21 +38,4 @@
       <filename>repmgr.conf</filename>.
     </para>
   </refsect1>
-
-  <refsect1 id="repmgr-cluster-cleanup-events">
-    <title>Event notifications</title>
-    <para>
-      A <literal>cluster_cleanup</literal> <link linkend="event-notifications">event notification</link> will be generated.
-    </para>
-  </refsect1>
-
-
-  <refsect1>
-    <title>See also</title>
-    <para>
-      For more details see the sections <xref linkend="repmgrd-monitoring"> and
-      <xref linkend="repmgrd-monitoring-configuration">.
-    </para>
-  </refsect1>
-
 </refentry>

doc/repmgr-cluster-crosscheck.sgml

@@ -38,34 +38,5 @@
       and therefore determine the state of outbound connections from that node.
     </para>
   </refsect1>
-
-  <refsect1>
-    <title>Exit codes</title>
-    <para>
-      Following exit codes can be emitted by <command>repmgr cluster crosscheck</command>:
-    </para>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            The check completed successfully and all nodes are reachable.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_NODE_STATUS (25)</option></term>
-        <listitem>
-          <para>
-            One or more nodes could not be reached.
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-  </refsect1>
-
 </refentry>
 

doc/repmgr-cluster-event.sgml

@@ -49,22 +49,6 @@
     </para>
   </refsect1>
 
-  <refsect1>
-    <title>Output format</title>
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <literal>--csv</literal>: generate output in CSV format. Note that the <literal>Details</literal>
-            column will currently not be emitted in CSV format.
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-    </para>
-  </refsect1>
-
   <refsect1>
     <title>Example</title>
     <para>

doc/repmgr-cluster-matrix.sgml

@@ -97,35 +97,5 @@
     useful result.
   </para>
   </refsect1>
-
-
-  <refsect1>
-    <title>Exit codes</title>
-    <para>
-      Following exit codes can be emitted by <command>repmgr cluster matrix</command>:
-    </para>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            The check completed successfully and all nodes are reachable.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_NODE_STATUS (25)</option></term>
-        <listitem>
-          <para>
-            One or more nodes could not be reached.
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-  </refsect1>
-
 </refentry>
 

doc/repmgr-cluster-show.sgml

@@ -81,91 +81,35 @@
 
   <refsect1>
     <title>Options</title>
-
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--csv</option></term>
-        <listitem>
-		  <para>
-			<command>repmgr cluster show</command> accepts an optional parameter <literal>--csv</literal>, which
-			outputs the replication cluster's status in a simple CSV format, suitable for
-			parsing by scripts:
-			<programlisting>
+    <para>
+      <command>repmgr cluster show</command> accepts an optional parameter <literal>--csv</literal>, which
+      outputs the replication cluster's status in a simple CSV format, suitable for
+      parsing by scripts:
+      <programlisting>
     $ repmgr -f /etc/repmgr.conf cluster show --csv
     1,-1,-1
     2,0,0
     3,0,1</programlisting>
-		  </para>
-		  <para>
-			The columns have following meanings:
-			<itemizedlist spacing="compact" mark="bullet">
-			  <listitem>
-				<simpara>
-				  node ID
-				</simpara>
-			  </listitem>
-			  <listitem>
-				<simpara>
-            availability (0 = available, -1 = unavailable)
-				</simpara>
-			  </listitem>
-			  <listitem>
-				<simpara>
-				  recovery state (0 = not in recovery, 1 = in recovery, -1 = unknown)
-				</simpara>
-			  </listitem>
-			</itemizedlist>
-		  </para>
-		</listitem>
-	  </varlistentry>
-
-      <varlistentry>
-        <term><option>--verbose</option></term>
-        <listitem>
-          <para>
-			Display the full text of any database connection error messages
-          </para>
-        </listitem>
-      </varlistentry>
-
-	</variablelist>
-
-  </refsect1>
-
-
-  <refsect1>
-    <title>Exit codes</title>
-    <para>
-      Following exit codes can be emitted by <command>repmgr cluster show</command>:
     </para>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            No issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_NODE_STATUS (25)</option></term>
-        <listitem>
-          <para>
-            One or more issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>See also</title>
     <para>
-     <xref linkend="repmgr-node-status">, <xref linkend="repmgr-node-check">
+      The columns have following meanings:
+      <itemizedlist spacing="compact" mark="bullet">
+        <listitem>
+          <simpara>
+            node ID
+          </simpara>
+        </listitem>
+        <listitem>
+          <simpara>
+            availability (0 = available, -1 = unavailable)
+          </simpara>
+        </listitem>
+        <listitem>
+          <simpara>
+            recovery state (0 = not in recovery, 1 = in recovery, -1 = unknown)
+          </simpara>
+        </listitem>
+      </itemizedlist>
     </para>
   </refsect1>
 

doc/repmgr-node-check.sgml

@@ -61,9 +61,7 @@
 
      <listitem>
       <simpara>
-        <literal>--archive-ready</literal>: checks for WAL files which have not yet been archived,
-        and returns <literal>WARNING</literal> or <literal>CRITICAL</literal> if the number
-        exceeds <varname>archive_ready_warning</varname> or <varname>archive_ready_critical</varname> respectively.
+        <literal>--archive-ready</literal>: checks for WAL files which have not yet been archived
       </simpara>
      </listitem>
 
@@ -79,110 +77,11 @@
       </simpara>
      </listitem>
 
-     <listitem>
-      <simpara>
-        <literal>--missing-slots</literal>: checks there are no missing replication slots
-      </simpara>
-     </listitem>
-
     </itemizedlist>
   </para>
+  <para>
+   Individual checks can also be output in a Nagios-compatible format by additionally
+   providing the option <literal>--nagios</literal>.
+  </para>
   </refsect1>
-
-  <refsect1>
-    <title>Output format</title>
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <literal>--csv</literal>: generate output in CSV format (not available
-            for individual checks)
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>--nagios</literal>: generate output in a Nagios-compatible format
-          </simpara>
-        </listitem>
-      </itemizedlist>
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Exit codes</title>
-
-    <para>
-      When executing <command>repmgr node check</command> with one of the individual
-      checks listed above, &repmgr; will emit one of the following Nagios-style exit codes
-      (even if <literal>--nagios</literal> is not supplied):
-
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <literal>0</literal>: OK
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>1</literal>: WARNING
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>2</literal>: ERROR
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>3</literal>: UNKNOWN
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-    </para>
-
-
-
-    <para>
-      Following exit codes can be emitted by <command>repmgr status check</command>
-      if no individual check was specified.
-    </para>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            No issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_NODE_STATUS (25)</option></term>
-        <listitem>
-          <para>
-            One or more issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-  </refsect1>
-
-
-
-  <refsect1>
-    <title>See also</title>
-    <para>
-     <xref linkend="repmgr-node-status">, <xref linkend="repmgr-cluster-show">
-    </para>
-  </refsect1>
-
 </refentry>

doc/repmgr-node-rejoin.sgml

@@ -28,10 +28,6 @@
         If the node is running and needs to be attached to the current primary, use
         <xref linkend="repmgr-standby-follow">.
       </para>
-      <para>
-        Note <xref linkend="repmgr-standby-follow"> can only be used for standbys which have not diverged
-        from the rest of the cluster.
-      </para>
     </tip>
   </refsect1>
 
@@ -50,95 +46,6 @@
   </refsect1>
 
   <refsect1>
-
-    <title>Options</title>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check prerequisites but don't actually execute the rejoin.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--force-rewind[=/path/to/pg_rewind]</option></term>
-        <listitem>
-          <para>
-            Execute <application>pg_rewind</application>.
-          </para>
-          <para>
-            It is only necessary to provide the <application>pg_rewind</application> path
-            if using PostgreSQL 9.3 or 9.4, and <application>pg_rewind</application>
-            is not installed in the PostgreSQL <filename>bin</filename> directory.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--config-files</option></term>
-        <listitem>
-          <para>
-            comma-separated list of configuration files to retain after
-            executing <application>pg_rewind</application>.
-          </para>
-          <para>
-            Currently <application>pg_rewind</application> will overwrite
-            the local node's configuration files with the files from the source node,
-            so it's advisable to use this option to ensure they are kept.
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-      <varlistentry>
-        <term><option>--config-archive-dir</option></term>
-        <listitem>
-          <para>
-            Directory to temporarily store configuration files specified with
-            <option>--config-files</option>; default: <filename>/tmp</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-      <varlistentry>
-        <term><option>-W/--no-wait</option></term>
-        <listitem>
-          <para>
-            Don't wait for the node to rejoin cluster.
-          </para>
-          <para>
-            If this option is supplied, &repmgr; will restart the node but
-            not wait for it to connect to the primary.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsect1>
-  <refsect1>
-    <title>Configuration file settings</title>
-
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-       <listitem>
-         <simpara>
-           <literal>node_rejoin_timeout</literal>:
-		   the maximum length of time (in seconds) to wait for
-		   the node to reconnect to the replication cluster (defaults to
-		   the value set in <literal>standby_reconnect_timeout</literal>,
-		   60 seconds).
-		 </simpara>
-	   </listitem>
-	  </itemizedlist>
-	</para>
-
-  </refsect1>
-
-  <refsect1 id="repmgr-node-rejoin-events">
     <title>Event notifications</title>
     <para>
       A <literal>node_rejoin</literal> <link linkend="event-notifications">event notification</link> will be generated.
@@ -170,18 +77,11 @@
   </refsect1>
 
   <refsect1 id="repmgr-node-rejoin-pg-rewind" xreflabel="Using pg_rewind">
-
-   <indexterm>
-      <primary>pg_rewind</primary>
-      <secondary>using with "repmgr node rejoin"</secondary>
-    </indexterm>
-
     <title>Using <command>pg_rewind</command></title>
     <para>
       <command>repmgr node rejoin</command> can optionally use <command>pg_rewind</command> to re-integrate a
       node which has diverged from the rest of the cluster, typically a failed primary.
-      <command>pg_rewind</command> is available in PostgreSQL 9.5 and later as part of the core distribution,
-      and can be installed from external sources for PostgreSQL 9.3 and 9.4.
+      <command>pg_rewind</command> is available in PostgreSQL 9.5 and later.
     </para>
     <note>
       <para>
@@ -193,7 +93,7 @@
     </note>
 
     <para>
-      To have <command>repmgr node rejoin</command> use <command>pg_rewind</command>,
+      To have <command>repmgr node rejoin</command> use <command>pg_rewind</command> if required,
       pass the command line option <literal>--force-rewind</literal>, which will tell &repmgr;
       to execute <command>pg_rewind</command> to ensure the node can be rejoined successfully.
     </para>
@@ -226,15 +126,6 @@
     INFO: pg_rewind would now be executed
     DETAIL: pg_rewind command is:
       pg_rewind -D '/var/lib/postgresql/data' --source-server='host=node1 dbname=repmgr user=repmgr'</programlisting>
-
-    <note>
-      <para>
-        If <option>--force-rewind</option> is used with the <option>--dry-run</option> option,
-        this checks the prerequisites for using <application>pg_rewind</application>, but cannot
-        predict the outcome of actually executing <application>pg_rewind</application>.
-      </para>
-    </note>
-
     <programlisting>
     $ repmgr node rejoin -f /etc/repmgr.conf -d 'host=node1 dbname=repmgr user=repmgr' \
          --force-rewind --config-files=postgresql.local.conf,postgresql.conf --verbose

doc/repmgr-node-status.sgml

@@ -24,7 +24,7 @@
     <title>Example</title>
     <para>
     <programlisting>
-        $ repmgr -f /etc/repmgr.conf node status
+        $ repmgr -f /etc/repmgr.comf node status
         Node "node1":
             PostgreSQL version: 10beta1
             Total data size: 30 MB
@@ -38,54 +38,10 @@
     </para>
   </refsect1>
 
-  <refsect1>
-    <title>Output format</title>
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <literal>--csv</literal>: generate output in CSV format
-          </simpara>
-        </listitem>
-      </itemizedlist>
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Exit codes</title>
-    <para>
-      Following exit codes can be emitted by <command>repmgr node status</command>:
-    </para>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            No issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_NODE_STATUS (25)</option></term>
-        <listitem>
-          <para>
-            One or more issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-  </refsect1>
-
-
   <refsect1>
     <title>See also</title>
     <para>
-      See <xref linkend="repmgr-node-check"> to diagnose issues and <xref linkend="repmgr-cluster-show">
-      for an overview of all nodes in the cluster.
+      See <xref linkend="repmgr-node-check"> to diagnose issues.
     </para>
   </refsect1>
 </refentry>

doc/repmgr-primary-register.sgml

@@ -17,7 +17,7 @@
     <title>Description</title>
     <para>
       <command>repmgr primary register</command> registers a primary node in a
-      streaming replication cluster, and configures it for use with &repmgr;, including
+      streaming replication cluster, and configures it for use with repmgr, including
       installing the &repmgr; extension. This command needs to be executed before any
       standby nodes are registered.
     </para>
@@ -26,7 +26,7 @@
   <refsect1>
     <title>Execution</title>
     <para>
-      Execute with the <option>--dry-run</option> option to check what would happen without
+      Execute with the <literal>--dry-run</literal> option to check what would happen without
       actually registering the primary.
     </para>
     <para>
@@ -36,7 +36,7 @@
 
     <note>
     <para>
-      If providing the configuration file location with <option>-f/--config-file</option>,
+      If providing the configuration file location with <literal>-f/--config-file</literal>,
       avoid using a relative path, as &repmgr; stores the configuration file location
       in the repmgr metadata for use when &repmgr; is executed remotely (e.g. during
       <xref linkend="repmgr-standby-switchover">). &repmgr; will attempt to convert the
@@ -49,44 +49,9 @@
   </refsect1>
 
   <refsect1>
-
-    <title>Options</title>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check prerequisites but don't actually register the primary.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term><option>-F</option>, <option>--force</option></term>
-        <listitem>
-          <para>
-            Overwrite an existing node record
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsect1>
-
-
-  <refsect1 id="repmgr-primary-register-events">
     <title>Event notifications</title>
     <para>
-      Following <link linkend="event-notifications">event notifications</link> will be generated:
-      <itemizedlist spacing="compact" mark="bullet">
-        <listitem>
-          <simpara><literal>cluster_created</literal></simpara>
-        </listitem>
-        <listitem>
-          <simpara><literal>primary_register</literal></simpara>
-        </listitem>
-      </itemizedlist>
+      A <literal>primary_register</literal> <link linkend="event-notifications">event notification</link> will be generated.
     </para>
   </refsect1>
 

doc/repmgr-primary-unregister.sgml

@@ -22,7 +22,7 @@
   <refsect1>
     <title>Execution</title>
     <para>
-      <command>repmgr primary unregister</command> can be run on any active &repmgr; node,
+      <command>repmgr primary unregister</command> should be run on the current primary,
       with the ID of the node to unregister passed as <option>--node-id</option>.
     </para>
     <para>
@@ -64,7 +64,7 @@
 
   </refsect1>
 
-  <refsect1 id="repmgr-primary-unregister-events">
+  <refsect1>
     <title>Event notifications</title>
     <para>
       A <literal>primary_unregister</literal> <link linkend="event-notifications">event notification</link> will be generated.

doc/repmgr-standby-clone.sgml

@@ -25,11 +25,9 @@
     <note>
       <simpara>
         <command>repmgr standby clone</command> does not start the standby, and after cloning
-        a standby, the command <command>repmgr standby register</command> must be executed to
-        notify &repmgr; of its existence.
+        <command>repmgr standby register</command> must be executed to notify &repmgr; of its presence.
       </simpara>
     </note>
-
   </refsect1>
 
 
@@ -49,7 +47,7 @@
     not be copied by default. &repmgr; can copy these files, either to the same
     location on the standby server (provided appropriate directory and file permissions
     are available), or into the standby's data directory. This requires passwordless
-    SSH access to the primary server. Add the option <option>--copy-external-config-files</option>
+    SSH access to the primary server. Add the option <literal>--copy-external-config-files</literal>
     to the <command>repmgr standby clone</command> command; by default files will be copied to
     the same path as on the upstream server. Note that the user executing <command>repmgr</command>
     must have write access to those directories.
@@ -59,96 +57,15 @@
     <literal>--copy-external-config-files=pgdata</literal>, but note that
     any include directives in the copied files may need to be updated.
    </para>
-
-   <note>
-	 <para>
-	   When executing <command>repmgr standby clone</command> with the
-	   <option>--copy-external-config-files</option> aand <option>--dry-run</option>
-	   options, &repmgr; will check the SSH connection to the source node, but
-	   will not verify whether the files can actually be copied.
-	 </para>
-	 <para>
-	   During the actual clone operation, a check will be made before the database itself
-	   is cloned to determine whether the files can actually be copied; if any problems are
-	   encountered, the clone operation will be aborted, enabling the user to fix
-	   any issues before retrying the clone operation.
-	 </para>
-   </note>
-
    <tip>
     <simpara>
      For reliable configuration file management we recommend using a
      configuration management tool such as Ansible, Chef, Puppet or Salt.
     </simpara>
    </tip>
-
   </refsect1>
 
-  <refsect1 id="repmgr-standby-clone-recovery-conf">
-   <indexterm>
-     <primary>recovery.conf</primary>
-     <secondary>customising with "repmgr standby clone"</secondary>
-   </indexterm>
-
-   <title>Customising recovery.conf</title>
-   <para>
-     By default, &repmgr; will create a minimal <filename>recovery.conf</filename>
-     containing following parameters:
-   </para>
-
-   <itemizedlist spacing="compact" mark="bullet">
-
-     <listitem>
-       <simpara><varname>standby_mode</varname> (always <literal>'on'</literal>)</simpara>
-     </listitem>
-
-     <listitem>
-       <simpara><varname>recovery_target_timeline</varname> (always <literal>'latest'</literal>)</simpara>
-     </listitem>
-
-     <listitem>
-       <simpara><varname>primary_conninfo</varname></simpara>
-     </listitem>
-
-     <listitem>
-       <simpara><varname>primary_slot_name</varname> (if replication slots in use)</simpara>
-     </listitem>
-
-   </itemizedlist>
-
-   <para>
-     The following additional parameters can be specified in <filename>repmgr.conf</filename>
-     for inclusion in <filename>recovery.conf</filename>:
-   </para>
-
-   <itemizedlist spacing="compact" mark="bullet">
-
-     <listitem>
-       <simpara><varname>restore_command</varname></simpara>
-     </listitem>
-
-     <listitem>
-       <simpara><varname>archive_cleanup_command</varname></simpara>
-     </listitem>
-
-     <listitem>
-       <simpara><varname>recovery_min_apply_delay</varname></simpara>
-     </listitem>
-
-   </itemizedlist>
-
-   <note>
-     <para>
-       We recommend using <ulink url="https://www.pgbarman.org/">Barman</ulink> to manage
-       WAL file archiving. For more details on combining &repmgr; and <application>Barman</application>,
-       in particular using <varname>restore_command</varname> to configure Barman as a backup source of
-       WAL files, see <xref linkend="cloning-from-barman">.
-     </para>
-   </note>
-
-  </refsect1>
-
-  <refsect1 id="repmgr-standby-clone-wal-management">
+  <refsect1 id="repmgr-standby-clone-wal-management" xreflabel="Managing WAL during the cloning process">
    <title>Managing WAL during the cloning process</title>
    <para>
     When initially cloning a standby, you will need to ensure
@@ -183,185 +100,12 @@
    </note>
   </refsect1>
 
-
-  <refsect1 id="repmgr-standby-create-recovery-conf">
-
-   <indexterm>
-     <primary>recovery.conf</primary>
-     <secondary>generating for a standby cloned by another method</secondary>
-   </indexterm>
-
-   <title>Using a standby cloned by another method</title>
-   <para>
-     &repmgr; supports standbys cloned by another method (e.g. using <application>barman</application>'s
-     <command><ulink url="http://docs.pgbarman.org/release/2.4/#recover">barman recover</ulink></command> command).
-   </para>
-   <para>
-     To integrate the standby as a &repmgr; node, ensure the <filename>repmgr.conf</filename>
-     file is created for the node, and that it has been registered using
-     <command><link linkend="repmgr-standby-register">repmgr standby register</link></command>.
-     Then execute the command <command>repmgr standby clone --recovery-conf-only</command>.
-     This will create the <filename>recovery.conf</filename> file needed to attach
-     the node to its upstream, and will also create a replication slot on the
-     upstream node if required.
-   </para>
-   <para>
-     Note that the upstream node must be running. An existing
-     <filename>recovery.conf</filename> will not be overwritten unless the
-     <option>-F/--force</option> option is provided.
-   </para>
-   <para>
-     Execute <command>repmgr standby clone --recovery-conf-only --dry-run</command>
-     to check the prerequisites for creating the <filename>recovery.conf</filename> file,
-     and display the contents of the file without actually creating it.
-   </para>
-
-   <note>
-     <para>
-       <option>--recovery-conf-only</option> was introduced in &repmgr; <link linkend="release-4.0.4">4.0.4</link>.
-     </para>
-   </note>
-
-  </refsect1>
-
   <refsect1>
-
-    <title>Options</title>
-
-    <variablelist>
-
-      <varlistentry>
-        <term><option>-d, --dbname=CONNINFO</option></term>
-        <listitem>
-          <para>
-            Connection string of the upstream node to use for cloning.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check prerequisites but don't actually clone the standby.
-          </para>
-          <para>
-            If <option>--recovery-conf-only</option> specified, the contents of
-            the generated <filename>recovery.conf</filename> file will be displayed
-            but the file itself not written.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>-c, --fast-checkpoint</option></term>
-        <listitem>
-          <para>
-            Force fast checkpoint (not effective when cloning from Barman).
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--copy-external-config-files[={samepath|pgdata}]</option></term>
-        <listitem>
-          <para>
-            Copy configuration files located outside the data directory on the source
-            node to the same path on the standby (default) or to the
-            PostgreSQL data directory.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--no-upstream-connection</option></term>
-        <listitem>
-          <para>
-            When using Barman, do not connect to upstream node.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>-R, --remote-user=USERNAME</option></term>
-        <listitem>
-          <para>
-            Remote system username for SSH operations (default: current local system username).
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option> --recovery-conf-only</option></term>
-        <listitem>
-          <para>
-            Create <filename>recovery.conf</filename> file for a previously cloned instance. &repmgr 4.0.4 and later.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--replication-user</option></term>
-        <listitem>
-          <para>
-            User to make replication connections with (optional, not usually required).
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--superuser</option></term>
-        <listitem>
-          <para>
-            If the &repmgr; user is not a superuser, the name of a valid superuser must
-            be provided with this option.
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-      <varlistentry>
-        <term><option>--upstream-conninfo</option></term>
-        <listitem>
-          <para>
-            <literal>primary_conninfo</literal> value to write in recovery.conf
-            when the intended upstream server does not yet exist.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--upstream-node-id</option></term>
-        <listitem>
-          <para>
-            ID of the upstream node to replicate from (optional, defaults to primary node)
-          </para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--without-barman </option></term>
-        <listitem>
-          <para>
-            Do not use Barman even if configured.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsect1>
-
-  <refsect1 id="repmgr-standby-clone-events">
     <title>Event notifications</title>
     <para>
       A <literal>standby_clone</literal> <link linkend="event-notifications">event notification</link> will be generated.
     </para>
   </refsect1>
 
-  <refsect1>
-    <title>See also</title>
-    <para>
-      See <xref linkend="cloning-standbys"> for details about various aspects of cloning.
-    </para>
-  </refsect1>
 </refentry>
 

doc/repmgr-standby-follow.sgml

@@ -26,19 +26,10 @@
       running. It can only be used to attach an active standby to the current primary node
    (and not to another standby).
     </para>
-	<tip>
-      <para>
-		To re-add an inactive node to the replication cluster, use
-		<xref linkend="repmgr-node-rejoin">.
-      </para>
-	</tip>
-
-	<para>
-	  <command>repmgr standby follow</command> will wait up to
-	  <varname>standby_follow_timeout</varname> seconds (default: <literal>30</literal>)
-	  to verify the standby has actually connected to the new primary.
-	</para>
-
+    <para>
+      To re-add an inactive node to the replication cluster, see
+      <xref linkend="repmgr-node-rejoin">
+    </para>
   </refsect1>
 
   <refsect1>
@@ -79,14 +70,11 @@
       </varlistentry>
 
       <varlistentry>
-        <term><option>-w</option></term>
+        <term><option>-W</option></term>
         <term><option>--wait</option></term>
         <listitem>
           <para>
-            Wait for a primary to appear. &repmgr; will wait for up to
-            <varname>primary_follow_timeout</varname> seconds
-            (default: 60 seconds) to verify that the standby is following the new primary.
-            This value can be defined in <filename>repmgr.conf</filename>.
+            Wait for a primary to appear.
           </para>
         </listitem>
       </varlistentry>
@@ -94,13 +82,13 @@
     </variablelist>
   </refsect1>
 
-  <refsect1 id="repmgr-standby-follow-events">
+  <refsect1>
     <title>Event notifications</title>
     <para>
       A <literal>standby_follow</literal> <link linkend="event-notifications">event notification</link> will be generated.
     </para>
     <para>
-      If provided, &repmgr; will substitute the placeholders <literal>%p</literal> with the node ID of the primary
+      If provided, &repmgr; will subsitute the placeholders <literal>%p</literal> with the node ID of the primary
       being followed, <literal>%c</literal> with its <literal>conninfo</literal> string, and
       <literal>%a</literal> with its node name.
     </para>

doc/repmgr-standby-promote.sgml

@@ -26,13 +26,6 @@
       by using <xref linkend="repmgr-standby-follow">; if <application>repmgrd</application>
         is active, it will handle this automatically.
     </para>
-    <para>
-      Note that &repmgr; will wait for up to <varname>promote_check_timeout</varname> seconds
-      (default: 60 seconds) to verify that the standby has been promoted, and will
-      check the promotion every <varname>promote_check_interval</varname> seconds (default: 1 second).
-      Both values can be defined in <filename>repmgr.conf</filename>.
-    </para>
-
   </refsect1>
 
   <refsect1>
@@ -49,8 +42,7 @@
     </para>
   </refsect1>
 
-
-  <refsect1 id="repmgr-standby-promote-events">
+  <refsect1>
     <title>Event notifications</title>
     <para>
       A <literal>standby_promote</literal> <link linkend="event-notifications">event notification</link> will be generated.

doc/repmgr-standby-register.sgml

@@ -92,74 +92,7 @@
    </para>
   </refsect1>
 
-  <refsect1 id="repmgr-standby-register-node-cloned-other-source">
-    <title>Registering a node not cloned by repmgr</title>
-    <para>
-      If you've cloned a standby using another method (e.g. <application>barman</application>'s
-     <command>barman recover</command> command), first execute
-     <link linkend="repmgr-standby-create-recovery-conf">repmgr standby clone --recovery-conf-only</link>
-     to add the <filename>recovery.conf</filename> file, then register the standby as usual.
-    </para>
-  </refsect1>
-
   <refsect1>
-
-    <title>Options</title>
-
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check prerequisites but don't actually register the standby.
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-      <varlistentry>
-       <term><option>-F</option><option>--force</option></term>
-        <listitem>
-          <para>
-            Overwrite an existing node record
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-      <varlistentry>
-        <term><option>--upstream-node-id</option></term>
-        <listitem>
-          <para>
-            ID of the upstream node to replicate from (optional)
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--wait-start</option></term>
-        <listitem>
-          <para>
-            wait for the standby to start (timeout in seconds, default 30 seconds)
-          </para>
-        </listitem>
-      </varlistentry>
-
-     <varlistentry>
-        <term><option>--wait-sync</option></term>
-        <listitem>
-          <para>
-            wait for the node record to synchronise to the standby (optional timeout in seconds)
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-    </variablelist>
-  </refsect1>
-
-  <refsect1 id="repmgr-standby-register-events">
     <title>Event notifications</title>
     <para>
       A <literal>standby_register</literal> <link linkend="event-notifications">event notification</link>
@@ -173,7 +106,7 @@
     </para>
 
     <para>
-      If provided, &repmgr; will substitute the placeholders <literal>%p</literal> with the node ID of the
+      If provided, &repmgr; will subsitute the placeholders <literal>%p</literal> with the node ID of the
       primary node, <literal>%c</literal> with its <literal>conninfo</literal> string, and
       <literal>%a</literal> with its node name.
     </para>

doc/repmgr-standby-switchover.sgml

@@ -12,7 +12,6 @@
     <refpurpose>promote a standby to primary and demote the existing primary to a standby</refpurpose>
   </refnamediv>
 
-
   <refsect1>
     <title>Description</title>
 
@@ -36,21 +35,6 @@
         a successful switchover.
       </para>
     </note>
-    <para>
-      For more details on performing a switchover, including preparation and configuration,
-      see section <xref linkend="performing-switchover">.
-    </para>
-
-    <note>
-      <para>
-        <application>repmgrd</application> should not be active on any nodes while a switchover is being
-        executed. This restriction may be lifted in a later version.
-      </para>
-      <para>
-        &repmgr; will not perform the switchover if an exclusive backup is running on the current primary.
-      </para>
-    </note>
-
   </refsect1>
 
   <refsect1>
@@ -100,14 +84,11 @@
       </varlistentry>
 
       <varlistentry>
-        <term><option>--force-rewind[=/path/to/pg_rewind]</option></term>
+        <term><option>--force-rewind</option></term>
         <listitem>
           <para>
             Use <application>pg_rewind</application> to reintegrate the old primary if necessary
-            (and the prerequisites for using <application>pg_rewind</application> are met).
-            If using PostgreSQL 9.3 or 9.4, and the <application>pg_rewind</application>
-            binary is not installed in the PostgreSQL <filename>bin</filename> directory,
-            provide its full path. For more details see also <xref linkend="switchover-pg-rewind">.
+            (PostgreSQL 9.5 and later).
           </para>
         </listitem>
       </varlistentry>
@@ -134,48 +115,6 @@
 
   </refsect1>
 
-  <refsect1>
-    <title>Configuration file settings</title>
-
-    <para>
-     Note that following parameters in <filename>repmgr.conf</filename> are relevant to the
-     switchover operation:
-     <itemizedlist spacing="compact" mark="bullet">
-       <listitem>
-         <simpara>
-           <literal>reconnect_attempts</literal>: number of times to check the original primary
-           for a clean shutdown after executing the shutdown command, before aborting
-         </simpara>
-       </listitem>
-       <listitem>
-         <simpara>
-           <literal>reconnect_interval</literal>: interval (in seconds) to check the original
-           primary for a clean shutdown after executing the shutdown command (up to a maximum
-           of <literal>reconnect_attempts</literal> tries)
-         </simpara>
-       </listitem>
-       <listitem>
-         <simpara>
-           <literal>replication_lag_critical</literal>:
-           if replication lag (in seconds) on the standby exceeds this value, the
-           switchover will be aborted (unless the <literal>-F/--force</literal> option
-           is provided)
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           <literal>standby_reconnect_timeout</literal>:
-           number of seconds to attempt to wait for the demoted primary
-           to reconnect to the promoted primary (default: 60 seconds)
-         </simpara>
-       </listitem>
-
-     </itemizedlist>
-    </para>
-  </refsect1>
-
-
   <refsect1>
     <title>Execution</title>
 
@@ -183,12 +122,10 @@
       Execute with the <literal>--dry-run</literal> option to test the switchover as far as
       possible without actually changing the status of either node.
     </para>
-    <important>
-      <para>
-        <application>repmgrd</application> must be shut down on all nodes while a switchover is being
-        executed. This restriction will be removed in a future &repmgr; version.
-      </para>
-    </important>
+    <para>
+      <application>repmgrd</application> should not be active on any nodes while a switchover is being
+      executed. This restriction may be lifted in a later version.
+    </para>
     <para>
       External database connections, e.g. from an application, should not be permitted while
       the switchover is taking place. In particular, active transactions on the primary
@@ -196,7 +133,7 @@
     </para>
   </refsect1>
 
-  <refsect1 id="repmgr-standby-switchover-events">
+  <refsect1>
     <title>Event notifications</title>
     <para>
       <literal>standby_switchover</literal> and <literal>standby_promote</literal>
@@ -213,7 +150,7 @@
   <refsect1>
     <title>Exit codes</title>
     <para>
-      Following exit codes can be emitted by <command>repmgr standby switchover</command>:
+      Following exit codes can be emitted by <literal>repmgr standby switchover</literal>:
     </para>
     <variablelist>
 
@@ -241,7 +178,7 @@
           <para>
             The switchover was executed but a problem was encountered.
             Typically this means the former primary could not be reattached
-            as a standby. Check preceding log messages for more information.
+            as a standby.
           </para>
         </listitem>
       </varlistentry>

doc/repmgr-standby-unregister.sgml

@@ -44,22 +44,6 @@
   </refsect1>
 
   <refsect1>
-    <title>Options</title>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--node-id</option></term>
-        <listitem>
-          <para>
-            <varname>node_id</varname> of the node to unregister (optional)
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsect1>
-
-  <refsect1 id="repmgr-standby-unregister-events">
     <title>Event notifications</title>
     <para>
       A <literal>standby_unregister</literal> <link linkend="event-notifications">event notification</link> will be generated.

doc/repmgr-witness-register.sgml

@@ -50,7 +50,7 @@
   </refsect1>
 
 
-  <refsect1 id="repmgr-witness-register-events">
+  <refsect1>
     <title>Event notifications</title>
     <para>
       A <literal>witness_register</literal> <link linkend="event-notifications">event notification</link> will be generated.

doc/repmgr-witness-unregister.sgml

@@ -20,10 +20,7 @@
     </para>
     <para>
       The node does not have to be running to be unregistered, however if this is the
-      case then either provide connection information for the primary server, or
-	  execute <command>repmgr witness unregister</command> on a running node and
-	  provide the parameter <option>--node-id</option> with the node ID of the
-	  witness server.
+      case then connection information for the primary server must be provided.
     </para>
     <para>
       Execute with the <literal>--dry-run</literal> option to check what would happen
@@ -39,17 +36,17 @@
     INFO: connecting to witness node "node3" (ID: 3)
     INFO: unregistering witness node 3
     INFO: witness unregistration complete
-    DETAIL: witness node with UD 3 successfully unregistered</programlisting>
+    DETAIL: witness node with id 3 (conninfo: host=node3 dbname=repmgr user=repmgr port=5499) successfully unregistered</programlisting>
     </para>
     <para>
       Unregistering a non-running witness node:
       <programlisting>
         $ repmgr -f /etc/repmgr.conf witness unregister -h node1 -p 5501  -F
-        INFO: connecting to node "node3" (ID: 3)
-        NOTICE: unable to connect to node "node3" (ID: 3), removing node record on cluster primary only
+        INFO: connecting to witness node "node3" (ID: 3)
+        NOTICE: unable to connect to witness node "node3" (ID: 3), removing node record on cluster primary only
         INFO: unregistering witness node 3
         INFO: witness unregistration complete
-        DETAIL: witness node with id ID 3 successfully unregistered</programlisting>
+        DETAIL: witness node with id 3 (conninfo: host=node3 dbname=repmgr user=repmgr port=5499) successfully unregistered</programlisting>
     </para>
   </refsect1>
 
@@ -65,34 +62,8 @@
     </para>
   </refsect1>
 
+
   <refsect1>
-
-    <title>Options</title>
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check prerequisites but don't actually unregister the witness.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term><option>--node-id</option></term>
-        <listitem>
-          <para>
-            Unregister witness server with the specified node ID.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsect1>
-
-
-  <refsect1 id="repmgr-witness-unregister-events">
     <title>Event notifications</title>
     <para>
       A <literal>witness_unregister</literal> <link linkend="event-notifications">event notification</link> will be generated.

doc/repmgr.sgml

@@ -25,13 +25,7 @@
    <para>
    This is the official documentation of &repmgr; &repmgrversion; for
    use with PostgreSQL 9.3 - PostgreSQL 10.
-   </para>
-   <para>
-     &repmgr; is being continually developed and we strongly recommend using the
-     latest version. Please check the
-     <ulink url="https://repmgr.org/">repmgr website</ulink> for details
-     about the current &repmgr; version as well as the
-     <ulink url="https://repmgr.org/docs/current/index.html">current documentation</ulink>.
+   It describes the functionality supported by the current version of &repmgr;.
    </para>
 
    <para>

doc/repmgrd-bdr.sgml

@@ -15,7 +15,7 @@
   </para>
   <note>
     <simpara>
-      Due to the nature of BDR 1.x/2.x, it's only safe to use this solution for
+      Due to the nature of BDR, it's only safe to use this solution for
       a two-node scenario. Introducing additional nodes will create an inherent
       risk of node desynchronisation if a node goes down without being cleanly
       removed from the cluster.
@@ -99,16 +99,15 @@
       replication cluster. The database must be the BDR-enabled database.
     </para>
     <para>
-      If defined, the <varname>event_notifications</varname> parameter will restrict
-      execution of the script defined in  <varname>event_notification_command</varname>
+      If defined, the evenr <application>event_notifications</application> parameter
+      will restrict execution of <varname>event_notification_command</varname>
       to the specified event(s).
     </para>
     <note>
       <simpara>
         <varname>event_notification_command</varname> is the script which does the actual "heavy lifting"
         of reconfiguring the proxy server/ connection pooler. It is fully
-        user-definable; see section <xref linkend="bdr-event-notification-command"> for a reference
-        implementation.
+        user-definable; a reference implementation is documented below.
       </simpara>
     </note>
 
@@ -170,8 +169,8 @@
     </para>
   </sect1>
 
-  <sect1 id="bdr-event-notification-command" xreflabel="Defining the BDR failover &quot;event_notification command&quot;">
-    <title>Defining the BDR failover "event_notification_command"</title>
+  <sect1 id="bdr-event-notification-command" xreflabel="BDR failover event notification command">
+    <title>Defining the "event_notification_command"</title>
     <para>
       Key to "failover" execution is the <literal>event_notification_command</literal>,
       which is a user-definable script specified in <filename>repmpgr.conf</filename>

doc/repmgrd-configuration.sgml

@@ -1,486 +1,60 @@
 <chapter id="repmgrd-configuration">
 
-  <indexterm>
-    <primary>repmgrd</primary>
-    <secondary>configuration</secondary>
-  </indexterm>
+ <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>configuration</secondary>
+ </indexterm>
 
-  <title>repmgrd configuration</title>
+ <title>repmgrd configuration</title>
+ <para>
+  To use <application>repmgrd</application>, its associated function library must be
+  included in <filename>postgresql.conf</filename> with:
 
-  <para>
-    <application>repmgrd</application> is a daemon which runs on each PostgreSQL node,
-    monitoring the local node, and (unless it's the primary node) the upstream server
-    (the primary server or with cascading replication, another standby) which it's
-    connected to.
-  </para>
-  <para>
-    <application>repmgrd</application> can be configured to provide failover
-    capability in case the primary upstream node becomes unreachable, and/or
-    provide monitoring data to the &repmgr; metadatabase.
-  </para>
-
-  <sect1 id="repmgrd-basic-configuration">
-    <title>repmgrd basic configuration</title>
-
-    <para>
-      To use <application>repmgrd</application>, its associated function library <emphasis>must</emphasis> be
-      included via <filename>postgresql.conf</filename> with:
-
-      <programlisting>
-        shared_preload_libraries = 'repmgr'</programlisting>
-    </para>
-    <para>
-      Changing this setting requires a restart of PostgreSQL; for more details see
-      the <ulink url="https://www.postgresql.org/docs/current/static/runtime-config-client.html#GUC-SHARED-PRELOAD-LIBRARIES">PostgreSQL documentation</ulink>.
-    </para>
-
-
-    <sect2 id="repmgrd-automatic-failover-configuration">
-      <title>automatic failover configuration</title>
-      <para>
-        If using automatic failover, the following <application>repmgrd</application> options *must* be set in
-        <filename>repmgr.conf</filename> :
-        <programlisting>
-          failover=automatic
-          promote_command='/usr/bin/repmgr standby promote -f /etc/repmgr.conf --log-to-file'
-          follow_command='/usr/bin/repmgr standby follow -f /etc/repmgr.conf --log-to-file --upstream-node-id=%n'</programlisting>
-      </para>
-      <para>
-        Adjust file paths as appropriate; alway specify the full path to the &repmgr; binary.
-      </para>
-
-      <note>
-        <para>
-          &repmgr; will not apply <option>pg_bindir</option> when executing <option>promote_command</option>
-          or <option>follow_command</option>; these can be user-defined scripts so must always be
-          specified with the full path.
-        </para>
-      </note>
-
-      <para>
-        Note that the <literal>--log-to-file</literal> option will cause
-        output generated by the &repmgr; command, when executed by <application>repmgrd</application>,
-        to be logged to the same destination configured to receive log output for <application>repmgrd</application>.
-        See <filename><ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink></filename>
-        for further <application>repmgrd</application>-specific settings.
-      </para>
-      <para>
-        When <varname>failover</varname> is set to <literal>automatic</literal>, upon detecting failure
-        of the current  primary, <application>repmgrd</application> will execute one of:
-      </para>
-      <itemizedlist spacing="compact" mark="bullet">
-        <listitem>
-          <simpara>
-            <varname>promote_command</varname> (if the current server is to become the new primary)
-          </simpara>
-        </listitem>
-        <listitem>
-          <simpara>
-            <varname>follow_command</varname> (if the current server needs to follow another server which has
-            become the new primary)
-          </simpara>
-        </listitem>
-      </itemizedlist>
-      <note>
-        <para>
-          These commands can be any valid shell script which results in one of these
-          two actions happening, but if &repmgr;'s <command>standby follow</command> or
-          <command>standby promote</command>
-          commands are not executed (either directly as shown here, or from a script which
-          performs other actions), the &repmgr; metadata will not be updated and
-          &repmgr; will no longer function reliably.
-        </para>
-      </note>
-
-      <para>
-        The <varname>follow_command</varname> should provide the <literal>--upstream-node-id=%n</literal>
-        option to <command>repmgr standby follow</command>; the <literal>%n</literal> will be replaced by
-        <application>repmgrd</application> with the ID of the new primary node. If this is not provided, &repmgr;
-        will attempt to determine the new primary by itself, but if the
-        original primary comes back online after the new primary is promoted, there is a risk that
-        <command>repmgr standby follow</command> will result in the node continuing to follow
-        the original primary.
-      </para>
-    </sect2>
-
-    <sect2 id="repmgrd-service-configuration">
-      <indexterm>
-        <primary>repmgrd</primary>
-        <secondary>PostgreSQL service configuration</secondary>
-      </indexterm>
-      <title>PostgreSQL service configuration</title>
-      <para>
-        If using automatic failover, currently <application>repmgrd</application> will need to execute
-        <link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>
-        to restart PostgreSQL on standbys to have them follow a new primary.
-      </para>
-      <para>
-        To ensure this happens smoothly, it's essential to provide the appropriate system/service restart
-        command appropriate to your operating system via <varname>service_restart_command</varname>
-        in <filename>repmgr.conf</filename>. If you don't do this, <application>repmgrd</application>
-        will default to using <command>pg_ctl</command>, which can result in unexpected problems,
-        particularly on <application>systemd</application>-based systems.
-      </para>
-      <para>
-        For more details, see <xref linkend="configuration-file-service-commands">.
-      </para>
-    </sect2>
-
-    <sect2 id="repmgrd-monitoring-configuration" xreflabel="repmgrd monitoring configuration">
-      <indexterm>
-        <primary>repmgrd</primary>
-        <secondary>monitoring configuration</secondary>
-      </indexterm>
-      <title>Monitoring configuration</title>
-      <para>
-        To enable monitoring, set:
-        <programlisting>
-          monitoring_history=yes</programlisting>
-        in <filename>repmgr.conf</filename>.
-      </para>
-      <para>
-        The default monitoring interval is 2 seconds; this value can be explicitly set using:
-        <programlisting>
-          monitor_interval_secs=&lt;seconds&gt;</programlisting>
-        in <filename>repmgr.conf</filename>.
-      </para>
-      <para>
-        For more details on monitoring, see <xref linkend="repmgrd-monitoring">.
-      </para>
-    </sect2>
-
-    <sect2 id="repmgrd-reloading-configuration"xreflabel="reloading repmgrd configuration">
-      <indexterm>
-        <primary>repmgrd</primary>
-        <secondary>applying configuration changes</secondary>
-      </indexterm>
-      <title>Applying configuration changes to repmgrd</title>
-      <para>
-        To apply configuration file changes to a running <application>repmgrd</application>
-        daemon, execute the operating system's <application>repmgrd</application> service reload command
-        (see <xref linkend="appendix-packages"> for examples),
-          or for instances  which were manually started, execute <command>kill -HUP</command>, e.g.
-          <command>kill -HUP `cat /tmp/repmgrd.pid`</command>.
-      </para>
-      <tip>
-        <para>
-          Check the <application>repmgrd</application> log to see what changes were
-          applied, or if any issues were encountered when reloading the configuration.
-        </para>
-      </tip>
-      <para>
-        Note that only the following subset of configuration file parameters can be changed on a
-        running <application>repmgrd</application> daemon:
-      </para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <varname>async_query_timeout</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>bdr_local_monitoring_only</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>bdr_recovery_timeout</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>conninfo</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>degraded_monitoring_timeout</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>event_notification_command</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>event_notifications</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>failover</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>follow_command</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>log_facility</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>log_file</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>log_level</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>log_status_interval</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>monitor_interval_secs</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>monitoring_history</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>primary_notification_timeout</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>promote_command</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>reconnect_attempts</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>reconnect_interval</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>repmgrd_standby_startup_timeout</varname>
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-
-      <para>
-        The following set of configuration file parameters must be updated via
-        <command><link linkend="repmgr-standby-register">repmgr standby register --force</link></command>,
-        as they require changes to the <literal>repmgr.nodes</literal> table so they are visible to
-        all nodes in the replication cluster:
-      </para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <varname>node_id</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>node_name</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>data_directory</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>location</varname>
-          </simpara>
-        </listitem>
-
-
-        <listitem>
-          <simpara>
-            <varname>priority</varname>
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-
-      <note>
-        <para>
-          After executing <command><link linkend="repmgr-standby-register">repmgr standby register --force</link></command>,
-          <application>repmgrd</application> <emphasis>must</emphasis> be restarted for the changes to take effect.
-        </para>
-      </note>
-
-    </sect2>
-
-  </sect1>
-
-  <sect1 id="repmgrd-daemon">
-    <indexterm>
-      <primary>repmgrd</primary>
-      <secondary>starting and stopping</secondary>
-    </indexterm>
-    <title>repmgrd daemon</title>
-    <para>
-      If installed from a package, the <application>repmgrd</application> can be started
-      via the operating system's service command, e.g. in <application>systemd</application>
-      using <command>systemctl</command>.
-    </para>
-    <para>
-      See appendix <xref linkend="appendix-packages"> for details of service commands
-      for different distributions.
-    </para>
-    <para>
-      <application>repmgrd</application> can be started manually like this:
-      <programlisting>
-        repmgrd -f /etc/repmgr.conf --pid-file /tmp/repmgrd.pid</programlisting>
-      and stopped with <command>kill `cat /tmp/repmgrd.pid`</command>. Adjust paths as appropriate.
-    </para>
-
-    <sect2 id="repmgrd-pid-file" xreflabel="repmgrd's PID file">
-      <indexterm>
-        <primary>repmgrd</primary>
-        <secondary>PID file</secondary>
-      </indexterm>
-      <indexterm>
-        <primary>PID file</primary>
-        <secondary>repmgrd</secondary>
-      </indexterm>
-      <title>repmgrd's PID file</title>
-      <para>
-        <application>repmgrd</application> will generate a PID file by default.
-      </para>
-      <note>
-        <simpara>
-          This is a behaviour change from previous versions (earlier than 4.1), where
-          the PID file had to be explicitly specified with the command line
-          parameter <option> --pid-file</option>.
-        </simpara>
-      </note>
-      <para>
-        The PID file can be specified in <filename>repmgr.conf</filename> with the configuration
-        parameter <varname>repmgrd_pid_file</varname>.
-      </para>
-      <para>
-        It can also be specified on the command line (as in previous versions) with
-        the command line parameter <option>--pid-file</option>. Note this will override
-        any value set in <filename>repmgr.conf</filename> with <varname>repmgrd_pid_file</varname>.
-        <option>--pid-file</option> may be deprecated in future releases.
-      </para>
-      <para>
-        If a PID file location was specified by the package maintainer, <application>repmgrd</application>
-        will use that. This only applies if &repmgr; was installed from a package and the package
-        maintainer has specified the PID file location.
-      </para>
-      <para>
-        If none of the above apply, <application>repmgrd</application> will create a PID file
-        in the operating system's temporary directory (das etermined by the environment variable
-        <varname>TMPDIR</varname>, or if that is not set, will use <filename>/tmp</filename>).
-      </para>
-      <para>
-        To prevent a PID file being generated at all, provide the command line option
-        <option>--no-pid-file</option>.
-      </para>
-      <para>
-        To see which PID file <application>repmgrd</application> would use, execute <application>repmgrd</application>
-        with the option <option>--show-pid-file</option>. <application>repmgrd</application>
-        will not start if this option is provided. Note that the value shown is the
-        file  <application>repmgrd</application> would use next time it starts, and is
-        not necessarily the PID file currently in use.
-      </para>
-    </sect2>
-
-    <sect2 id="repmgrd-configuration-debian-ubuntu">
-      <indexterm>
-        <primary>repmgrd</primary>
-        <secondary>Debian/Ubuntu and daemon configuration</secondary>
-      </indexterm>
-      <indexterm>
-        <primary>Debian/Ubuntu</primary>
-        <secondary>repmgrd daemon configuration</secondary>
-      </indexterm>
-
-      <title>repmgrd daemon configuration on Debian/Ubuntu</title>
-
-      <para>
-        If &repmgr; was installed from Debian/Ubuntu packages, additional configuration
-        is required before <application>repmgrd</application> is started as a daemon.
-      </para>
-      <para>
-        This is done via the file <filename>/etc/default/repmgrd</filename>, which by default
-        looks like this:
-        <programlisting>
-# default settings for repmgrd. This file is source by /bin/sh from
-# /etc/init.d/repmgrd
-
-# disable repmgrd by default so it won't get started upon installation
-# valid values: yes/no
-REPMGRD_ENABLED=no
-
-# configuration file (required)
-#REPMGRD_CONF="/path/to/repmgr.conf"
-
-# additional options
-#REPMGRD_OPTS=""
-
-# user to run repmgrd as
-#REPMGRD_USER=postgres
-
-# repmgrd binary
-#REPMGRD_BIN=/usr/bin/repmgrd
-
-# pid file
-#REPMGRD_PIDFILE=/var/run/repmgrd.pid</programlisting>
-      </para>
-      <para>
-        Set <varname>REPMGRD_ENABLED</varname> to <literal>yes</literal>, and <varname>REPMGRD_CONF</varname>
-        to the <filename>repmgr.conf</filename> file you are using.
-      </para>
-      <para>
-        If using <application>systemd</application>, you may need to execute <command>systemctl daemon-reload</command>.
-        Also, if you attempted to start <application>repmgrd</application> using <command>systemctl start repmgrd</command>,
-        you'll need to execute <command>systemctl stop repmgrd</command>. Because that's how <application>systemd</application>
-        rolls.
-      </para>
-
-    </sect2>
-  </sect1>
-
-  <sect1 id="repmgrd-connection-settings">
-    <title>repmgrd connection settings</title>
+  <programlisting>
+    shared_preload_libraries = 'repmgr'</programlisting>
+ </para>
+ <para>
+  Changing this setting requires a restart of PostgreSQL; for more details see
+  the <ulink url="https://www.postgresql.org/docs/current/static/runtime-config-client.html#GUC-SHARED-PRELOAD-LIBRARIES">PostgreSQL documentation</ulink>.
+ </para>
+ <para>
+  Additionally the following <application>repmgrd</application> options *must* be set in
+  <filename>repmgr.conf</filename> (adjust configuration file locations as appropriate):
+  <programlisting>
+    failover=automatic
+    promote_command='repmgr standby promote -f /etc/repmgr.conf --log-to-file'
+    follow_command='repmgr standby follow -f /etc/repmgr.conf --log-to-file --upstream-node-id=%n'</programlisting>
+ </para>
+ <para>
+  Note that the <literal>--log-to-file</literal> option will cause
+  output generated by the &repmgr; command, when executed by <application>repmgrd</application>,
+  to be logged to the same destination configured to receive log output for <application>repmgrd</application>.
+  See <filename>repmgr.conf.sample</filename> for further <application>repmgrd</application>-specific settings.
+ </para>
+ <para>
+  When <varname>failover</varname> is set to <literal>automatic</literal>, upon detecting failure
+  of the current  primary, <application>repmgrd</application> will execute one of
+  <varname>promote_command</varname> or <varname>follow_command</varname>,
+  depending on whether the current server is to become the new primary, or
+  needs to follow another server which has become the new primary. Note that
+  these commands can be any valid shell script which results in one of these
+  two actions happening, but if &repmgr;'s <command>standby follow</command> or
+  <command>standby promote</command>
+  commands are not executed (either directly as shown here, or from a script which
+  performs other actions), the &repmgr; metadata will not be updated and
+  &repmgr; will no longer function reliably.
+ </para>
+ <para>
+  The <varname>follow_command</varname> should provide the <literal>--upstream-node-id=%n</literal>
+  option to <command>repmgr standby follow</command>; the <literal>%n</literal> will be replaced by
+  <application>repmgrd</application> with the ID of the new primary node. If this is not provided, &repmgr;
+  will attempt to determine the new primary by itself, but  if the
+  original primary comes back online after the new primary is promoted, there is a risk that
+  <command>repmgr standby follow</command> will result in the node continuing to follow
+  the original primary.
+ </para>
+ <sect1 id="repmgrd-connection-settings">
+ <title>repmgrd connection settings</title>
  <para>
   In addition to the &repmgr; configuration settings, parameters in the
   <varname>conninfo</varname> string influence how &repmgr; makes a network connection to
@@ -502,43 +76,25 @@ REPMGRD_ENABLED=no
   <ulink url="https://www.postgresql.org/docs/current/static/libpq-connect.html#LIBPQ-PARAMKEYWORDS">PostgreSQL documentation</ulink>.
  </para>
  </sect1>
-
-
-
  <sect1 id="repmgrd-log-rotation">
-   <indexterm>
-     <primary>log rotation</primary>
-     <secondary>repmgrd</secondary>
-   </indexterm>
-
-   <indexterm>
-     <primary>repmgrd</primary>
-     <secondary>log rotation</secondary>
-   </indexterm>
-
   <title>repmgrd log rotation</title>
   <para>
-   To ensure the current <application>repmgrd</application> logfile
-   (specified in <filename>repmgr.conf</filename> with the parameter
-   <option>log_file</option>) does not grow indefinitely, configure your
-   system's <command>logrotate</command> to regularly rotate it.
+   To ensure the current <application>repmgrd</application> logfile does not grow
+   indefinitely, configure your system's <command>logrotate</command> to
+   regularly rotate it.
   </para>
   <para>
    Sample configuration to rotate logfiles weekly with retention for
    up to 52 weeks and rotation forced if a file grows beyond 100Mb:
    <programlisting>
-    /var/log/repmgr/repmgrd.log {
+    /var/log/postgresql/repmgr-9.6.log {
         missingok
         compress
         rotate 52
         maxsize 100M
         weekly
         create 0600 postgres postgres
-        postrotate
-            /usr/bin/killall -HUP repmgrd
-        endscript
     }</programlisting>
   </para>
-
  </sect1>
 </chapter>

doc/repmgrd-degraded-monitoring.sgml

@@ -1,4 +1,4 @@
-<chapter id="repmgrd-degraded-monitoring" xreflabel="repmgrd degraded monitoring">
+<chapter id="repmgrd-degraded-monitoring">
  <indexterm>
    <primary>repmgrd</primary>
    <secondary>degraded monitoring</secondary>
@@ -7,8 +7,8 @@
  <title>"degraded monitoring" mode</title>
  <para>
   In certain circumstances, <application>repmgrd</application> is not able to fulfill its primary mission
-  of monitoring the node's upstream server. In these cases it enters &quot;degraded monitoring&quot;
-  mode, where <application>repmgrd</application> remains active but is waiting for the situation
+  of monitoring the nodes' upstream server. In these cases it enters "degraded
+  monitoring" mode, where <application>repmgrd</application> remains active but is waiting for the situation
   to be resolved.
  </para>
  <para>
@@ -40,7 +40,7 @@
    </listitem>
 
    <listitem>
-    <simpara>repmgrd is monitoring the primary node, but it is not available (and no other node has been promoted as primary)</simpara>
+    <simpara>repmgrd is monitoring the primary node, but it is not available</simpara>
    </listitem>
   </itemizedlist>
  </para>
@@ -69,15 +69,7 @@
   By default, <literal>repmgrd</literal> will continue in degraded monitoring mode indefinitely.
   However a timeout (in seconds) can be set with <varname>degraded_monitoring_timeout</varname>,
   after which <application>repmgrd</application> will terminate.
+
  </para>
 
- <note>
-   <para>
-     If <application>repmgrd</application> is monitoring a primary mode which has been stopped
-     and manually restarted as a standby attached to a new primary, it will automatically detect
-     the status change and update the node record to reflect the node's new status
-     as an active standby. It will then resume monitoring the node as a standby.
-   </para>
- </note>
-
 </chapter>

doc/repmgrd-monitoring.sgml

@@ -1,12 +1,8 @@
-<chapter id="repmgrd-monitoring" xreflabel="Monitoring with repmgrd">
+<chapter id="repmgrd-monitoring">
  <indexterm>
    <primary>repmgrd</primary>
    <secondary>monitoring</secondary>
  </indexterm>
- <indexterm>
-   <primary>monitoring</primary>
-   <secondary>with repmgrd</secondary>
- </indexterm>
 
  <title>Monitoring with repmgrd</title>
  <para>

doc/repmgrd-network-split.sgml

@@ -40,8 +40,8 @@
   In a failover situation, <application>repmgrd</application> will check if any servers in the
   same location as the current primary node are visible.  If not, <application>repmgrd</application>
   will assume a network interruption and not promote any node in any
-  other location (it will however enter <link linkend="repmgrd-degraded-monitoring">degraded monitoring</link>
-  mode until a primary becomes visible).
+  other location (it will however enter <xref linkend="repmgrd-degraded-monitoring"> mode until
+  a primary becomes visible).
  </para>
 
 </chapter>

doc/switchover.sgml

@@ -57,14 +57,7 @@
 
    <para>
     As mentioned in the previous section, success of the switchover operation depends on
-    &repmgr; being able to shut down the current primary server quickly and cleanly.
-   </para>
-
-   <para>
-     Ensure that the promotion candidate has sufficient free walsenders available
-     (PostgreSQL configuration item <varname>max_wal_senders</varname>), and if replication
-     slots are in use, at least one free slot is available for the demotion candidate (
-     PostgreSQL configuration item <varname>max_replication_slots</varname>).
+    &repmgr;  being able to shut down the current primary server quickly and cleanly.
    </para>
 
    <para>
@@ -74,21 +67,13 @@
      promotion candidate to all standbys attached to the demotion candidate.
    </para>
 
-   <note>
-     <simpara>
-       &repmgr; expects to find the &repmgr; binary in the same path on the remote
-       server as on the local server.
-     </simpara>
-   </note>
-
    <para>
     Double-check which commands will be used to stop/start/restart the current
-    primary; on the current primary execute:
+    primary; on the primary execute:
     <programlisting>
      repmgr -f /etc/repmgr.conf node service --list --action=stop
      repmgr -f /etc/repmgr.conf node service --list --action=start
      repmgr -f /etc/repmgr.conf node service --list --action=restart</programlisting>
-
    </para>
 
    <para>
@@ -107,11 +92,7 @@
      <para>
        If the <option>service_*_command</option> options aren't defined, &repmgr; will
        fall back to using <application>pg_ctl</application> to stop/start/restart
-       PostgreSQL, which may not work properly, particularly when executed on a remote
-       server.
-     </para>
-     <para>
-       For more details, see <xref linkend="configuration-file-service-commands">.
+       PostgreSQL, which may not work properly.
      </para>
    </important>
 
@@ -129,20 +110,13 @@
    </note>
 
    <para>
-     Check that access from applications is minimalized or preferably blocked
-     completely, so applications are not unexpectedly interrupted.
+    Check that access from applications is minimalized or preferably blocked
+    completely, so applications are not unexpectedly interrupted.
    </para>
 
-   <note>
-     <para>
-       If an exclusive backup is running on the current primary, &repmgr; will not perform the
-       switchover.
-     </para>
-   </note>
-
    <para>
-     Check there is no significant replication lag on standbys attached to the
-     current primary.
+    Check there is no significant replication lag on standbys attached to the
+    current primary.
    </para>
 
    <para>
@@ -153,13 +127,10 @@
     manually with <command>repmgr node check --archive-ready</command>.
    </para>
 
-   <note>
-     <para>
-       Ensure that <application>repmgrd</application> is *not* running anywhere to prevent it unintentionally
-       promoting a node. This restriction will be removed in a future &repmgr; version.
-     </para>
-   </note>
-
+   <para>
+    Ensure that <application>repmgrd</application> is *not* running anywhere to prevent it unintentionally
+    promoting a node.
+   </para>
 
    <para>
     Finally, consider executing <command>repmgr standby switchover</command> with the
@@ -192,60 +163,34 @@
      </para>
    </important>
 
+   <para>
+     Note that following parameters in <filename>repmgr.conf</filename> are relevant to the
+     switchover operation:
+     <itemizedlist spacing="compact" mark="bullet">
+       <listitem>
+         <simpara>
+           <literal>reconnect_attempts</literal>: number of times to check the original primary
+           for a clean shutdown after executing the shutdown command, before aborting
+         </simpara>
+       </listitem>
+       <listitem>
+         <simpara>
+           <literal>reconnect_interval</literal>: interval (in seconds) to check the original
+           primary for a clean shutdown after executing the shutdown command (up to a maximum
+           of <literal>reconnect_attempts</literal> tries)
+         </simpara>
+       </listitem>
+       <listitem>
+         <simpara>
+           <literal>replication_lag_critical</literal>:
+           if replication lag (in seconds) on the standby exceeds this value, the
+           switchover will be aborted (unless the <literal>-F/--force</literal> option
+           is provided)
+         </simpara>
+       </listitem>
 
-   <note>
-     <simpara>
-       See <xref linkend="repmgr-standby-switchover"> for a full list of available
-       command line options and <filename>repmgr.conf</filename> settings relevant
-       to performing a switchover.
-     </simpara>
-   </note>
-
-  <sect2 id="switchover-pg-rewind" xreflabel="Switchover and pg_rewind">
-    <indexterm>
-      <primary>pg_rewind</primary>
-      <secondary>using with "repmgr standby switchover"</secondary>
-    </indexterm>
-    <title>Switchover and pg_rewind</title>
-    <para>
-      If the demotion candidate does not shut down smoothly or cleanly, there's a risk it
-      will have a slightly divergent timeline and will not be able to attach to the new
-      primary. To fix this situation without needing to reclone the old primary, it's
-      possible to use the <application>pg_rewind</application> utility, which will usually be
-      able to resync the two servers.
-    </para>
-    <para>
-      To have &repmgr; execute <application>pg_rewind</application> if it detects this
-      situation after promoting the new primary, add the <option>--force-rewind</option>
-      option.
-    </para>
-    <note>
-      <simpara>
-        If &repmgr; detects a situation where it needs to execute <application>pg_rewind</application>,
-        it will execute a <literal>CHECKPOINT</literal> on the new primary before executing
-        <application>pg_rewind</application>.
-      </simpara>
-    </note>
-    <para>
-      For more details on <application>pg_rewind</application>, see:
-      <ulink url="https://www.postgresql.org/docs/current/static/app-pgrewind.html">https://www.postgresql.org/docs/current/static/app-pgrewind.html</ulink>.
-    </para>
-    <para>
-      <application>pg_rewind</application> has been part of the core PostgreSQL distribution since
-      version 9.5. Users of versions 9.3 and 9.4 will need to manually install it; the source code is available here:
-      <ulink url="https://github.com/vmware/pg_rewind">https://github.com/vmware/pg_rewind</ulink>.
-      If the <application>pg_rewind</application>
-      binary is not installed in the PostgreSQL <filename>bin</filename> directory, provide
-      its full path  on the demotion candidate  with <option>--force-rewind</option>.
-    </para>
-    <para>
-      Note that building the 9.3/9.4 version of <application>pg_rewind</application> requires the PostgreSQL
-      source code. Also, PostgreSQL 9.3 does not provide <varname>wal_log_hints</varname>,
-      meaning data checksums must have been enabled when the database was initialized.
-    </para>
-  </sect2>
-
-
+     </itemizedlist>
+   </para>
  </sect1>
 
  <sect1 id="switchover-execution" xreflabel="Executing the switchover command">

doc/upgrading-repmgr.sgml

@@ -29,18 +29,8 @@
       </listitem>
       <listitem>
         <simpara>
-          <application>repmgrd</application> (if running) must be restarted.
-        </simpara>
-      </listitem>
-      <listitem>
-        <simpara>
-          For major releases, e.g. from <literal>4.0.x</literal> to <literal>4.1</literal>,
-          execute <command>ALTER EXTENSION repmgr UPDATE</command>
-          on the primary node in the database where the &repmgr; extension is installed.
-        </simpara>
-        <simpara>
-          This will update the extension metadata and, if necessary, apply
-          changes to the &repmgr; extension objects.
+          In the database where the &repmgr; extension is installed, execute
+          <command>ALTER EXTENSION repmgr UPDATE</command>.
         </simpara>
       </listitem>
     </orderedlist>
@@ -51,6 +41,10 @@
     release as they may contain upgrade instructions particular to individual versions.
   </para>
 
+  <para>
+    If the <application>repmgrd</application> daemon is in use, we recommend stopping it
+    before upgrading &repmgr;.
+  </para>
   <para>
     Note that it may be necessary to restart the PostgreSQL server if the upgrade contains
     changes to the shared object file used by <application>repmgrd</application>; check the

doc/version.sgml

@@ -1 +1 @@
-<!ENTITY repmgrversion "4.1.1">
+<!ENTITY repmgrversion "4.0.3">

errcode.h

@@ -44,8 +44,5 @@
 #define ERR_REGISTRATION_SYNC 20
 #define ERR_OUT_OF_MEMORY 21
 #define ERR_SWITCHOVER_INCOMPLETE 22
-#define ERR_FOLLOW_FAIL 23
-#define ERR_REJOIN_FAIL 24
-#define ERR_NODE_STATUS 25
 
 #endif							/* _ERRCODE_H_ */

log.c

@@ -42,7 +42,7 @@ _stderr_log_with_level(const char *level_name, int level, const char *fmt, va_li
 __attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 0)));
 
 int			log_type = REPMGR_STDERR;
-int			log_level = LOG_INFO;
+int			log_level = LOG_NOTICE;
 int			last_log_level = LOG_INFO;
 int			verbose_logging = false;
 int			terse_logging = false;
@@ -70,7 +70,7 @@ _stderr_log_with_level(const char *level_name, int level, const char *fmt, va_li
 
 	/*
 	 * Store the requested level so that if there's a subsequent log_hint() or
-	 * log_detail(), we can suppress that if --terse was specified,
+	 * log_detail(), we can suppress that if appropriate.
 	 */
 	last_log_level = level;
 
@@ -329,21 +329,6 @@ logger_set_terse(void)
 }
 
 
-void
-logger_set_level(int new_log_level)
-{
-	log_level = new_log_level;
-}
-
-
-void
-logger_set_min_level(int min_log_level)
-{
-	if (min_log_level > log_level)
-		log_level = min_log_level;
-}
-
-
 int
 detect_log_level(const char *level)
 {

log.h

@@ -128,8 +128,6 @@ bool		logger_shutdown(void);
 
 void		logger_set_verbose(void);
 void		logger_set_terse(void);
-void		logger_set_min_level(int min_log_level);
-void		logger_set_level(int new_log_level);
 
 void
 log_detail(const char *fmt,...)

repmgr--4.0--4.1.sql

@@ -1,2 +0,0 @@
--- complain if script is sourced in psql, rather than via CREATE EXTENSION
-\echo Use "CREATE EXTENSION repmgr" to load this file. \quit

repmgr--4.1.sql

@@ -1,167 +0,0 @@
--- complain if script is sourced in psql, rather than via CREATE EXTENSION
-\echo Use "CREATE EXTENSION repmgr" to load this file. \quit
-
-CREATE TABLE repmgr.nodes (
-  node_id          INTEGER     PRIMARY KEY,
-  upstream_node_id INTEGER     NULL REFERENCES nodes (node_id) DEFERRABLE,
-  active           BOOLEAN     NOT NULL DEFAULT TRUE,
-  node_name        TEXT        NOT NULL,
-  type             TEXT        NOT NULL CHECK (type IN('primary','standby','witness','bdr')),
-  location         TEXT        NOT NULL DEFAULT 'default',
-  priority         INT         NOT NULL DEFAULT 100,
-  conninfo         TEXT        NOT NULL,
-  repluser         VARCHAR(63) NOT NULL,
-  slot_name        TEXT        NULL,
-  config_file      TEXT        NOT NULL
-);
-
-CREATE TABLE repmgr.events (
-  node_id          INTEGER NOT NULL,
-  event            TEXT NOT NULL,
-  successful       BOOLEAN NOT NULL DEFAULT TRUE,
-  event_timestamp  TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-  details          TEXT NULL
-);
-
-DO $repmgr$
-DECLARE
-  DECLARE server_version_num INT;
-BEGIN
-  SELECT setting
-    FROM pg_catalog.pg_settings
-   WHERE name = 'server_version_num'
-    INTO server_version_num;
-  IF server_version_num >= 90400 THEN
-    EXECUTE $repmgr_func$
-CREATE TABLE repmgr.monitoring_history (
-  primary_node_id                INTEGER NOT NULL,
-  standby_node_id                INTEGER NOT NULL,
-  last_monitor_time              TIMESTAMP WITH TIME ZONE NOT NULL,
-  last_apply_time                TIMESTAMP WITH TIME ZONE,
-  last_wal_primary_location      PG_LSN NOT NULL,
-  last_wal_standby_location      PG_LSN,
-  replication_lag                BIGINT NOT NULL,
-  apply_lag                      BIGINT NOT NULL
-)
-    $repmgr_func$;
-  ELSE
-    EXECUTE $repmgr_func$
-CREATE TABLE repmgr.monitoring_history (
-  primary_node_id                INTEGER NOT NULL,
-  standby_node_id                INTEGER NOT NULL,
-  last_monitor_time              TIMESTAMP WITH TIME ZONE NOT NULL,
-  last_apply_time                TIMESTAMP WITH TIME ZONE,
-  last_wal_primary_location      TEXT NOT NULL,
-  last_wal_standby_location      TEXT,
-  replication_lag                BIGINT NOT NULL,
-  apply_lag                      BIGINT NOT NULL
-)
-    $repmgr_func$;
-  END IF;
-END$repmgr$;
-
-
-
-CREATE INDEX idx_monitoring_history_time
-          ON repmgr.monitoring_history (last_monitor_time, standby_node_id);
-
-CREATE VIEW repmgr.show_nodes AS
-   SELECT n.node_id,
-          n.node_name,
-          n.active,
-          n.upstream_node_id,
-          un.node_name AS upstream_node_name,
-          n.type,
-          n.priority,
-          n.conninfo
-     FROM repmgr.nodes n
-LEFT JOIN repmgr.nodes un
-       ON un.node_id = n.upstream_node_id;
-
-
-/* XXX update upgrade scripts! */
-CREATE TABLE repmgr.voting_term (
-  term INT NOT NULL
-);
-
-CREATE UNIQUE INDEX voting_term_restrict
-ON repmgr.voting_term ((TRUE));
-
-CREATE RULE voting_term_delete AS
-   ON DELETE TO repmgr.voting_term
-   DO INSTEAD NOTHING;
-
-
-/* ================= */
-/* repmgrd functions */
-/* ================= */
-
-/* monitoring functions */
-
-CREATE FUNCTION set_local_node_id(INT)
-  RETURNS VOID
-  AS 'MODULE_PATHNAME', 'set_local_node_id'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION get_local_node_id()
-  RETURNS INT
-  AS 'MODULE_PATHNAME', 'get_local_node_id'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION standby_set_last_updated()
-  RETURNS TIMESTAMP WITH TIME ZONE
-  AS 'MODULE_PATHNAME', 'standby_set_last_updated'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION standby_get_last_updated()
-  RETURNS TIMESTAMP WITH TIME ZONE
-  AS 'MODULE_PATHNAME', 'standby_get_last_updated'
-  LANGUAGE C STRICT;
-
-/* failover functions */
-
-CREATE FUNCTION notify_follow_primary(INT)
-  RETURNS VOID
-  AS 'MODULE_PATHNAME', 'notify_follow_primary'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION get_new_primary()
-  RETURNS INT
-  AS 'MODULE_PATHNAME', 'get_new_primary'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION reset_voting_status()
-  RETURNS VOID
-  AS 'MODULE_PATHNAME', 'reset_voting_status'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION am_bdr_failover_handler(INT)
-  RETURNS BOOL
-  AS 'MODULE_PATHNAME', 'am_bdr_failover_handler'
-  LANGUAGE C STRICT;
-
-CREATE FUNCTION unset_bdr_failover_handler()
-  RETURNS VOID
-  AS 'MODULE_PATHNAME', 'unset_bdr_failover_handler'
-  LANGUAGE C STRICT;
-
-
-CREATE VIEW repmgr.replication_status AS
-  SELECT m.primary_node_id, m.standby_node_id, n.node_name AS standby_name,
- 	     n.type AS node_type, n.active, last_monitor_time,
-         CASE WHEN n.type='standby' THEN m.last_wal_primary_location ELSE NULL END AS last_wal_primary_location,
-         m.last_wal_standby_location,
-         CASE WHEN n.type='standby' THEN pg_catalog.pg_size_pretty(m.replication_lag) ELSE NULL END AS replication_lag,
-         CASE WHEN n.type='standby' THEN
-           CASE WHEN replication_lag > 0 THEN age(now(), m.last_apply_time) ELSE '0'::INTERVAL END
-           ELSE NULL
-         END AS replication_time_lag,
-         CASE WHEN n.type='standby' THEN pg_catalog.pg_size_pretty(m.apply_lag) ELSE NULL END AS apply_lag,
-         AGE(NOW(), CASE WHEN pg_catalog.pg_is_in_recovery() THEN repmgr.standby_get_last_updated() ELSE m.last_monitor_time END) AS communication_time_lag
-    FROM repmgr.monitoring_history m
-    JOIN repmgr.nodes n ON m.standby_node_id = n.node_id
-   WHERE (m.standby_node_id, m.last_monitor_time) IN (
-	          SELECT m1.standby_node_id, MAX(m1.last_monitor_time)
-			    FROM repmgr.monitoring_history m1 GROUP BY 1
-         );
-

repmgr-action-bdr.c

@@ -83,10 +83,9 @@ do_bdr_register(void)
 		exit(ERR_BAD_CONFIG);
 	}
 
-	/* BDR 2 implementation is for 2 nodes only */
-	if (get_bdr_version_num() < 3 && bdr_nodes.node_count > 2)
+	if (bdr_nodes.node_count > 2)
 	{
-		log_error(_("repmgr can only support BDR 2.x clusters with 2 nodes"));
+		log_error(_("repmgr can only support BDR clusters with 2 nodes"));
 		log_detail(_("this BDR cluster has %i nodes"), bdr_nodes.node_count);
 		PQfinish(conn);
 		pfree(dbname);
@@ -177,7 +176,6 @@ do_bdr_register(void)
 
 	if (bdr_node_has_repmgr_set(conn, config_file_options.node_name) == false)
 	{
-		log_debug("bdr_node_has_repmgr_set() = false");
 		bdr_node_set_repmgr_set(conn, config_file_options.node_name);
 	}
 
@@ -203,7 +201,6 @@ do_bdr_register(void)
 			if (bdr_nodes.node_count == 0)
 			{
 				log_error(_("unable to retrieve any BDR node records"));
-				log_detail("%s", PQerrorMessage(conn));
 				PQfinish(conn);
 				exit(ERR_BAD_CONFIG);
 			}
@@ -255,35 +252,7 @@ do_bdr_register(void)
 	}
 
 	/* Add the repmgr extension tables to a replication set */
-
-	if (get_bdr_version_num() < 3)
-	{
-		add_extension_tables_to_bdr_replication_set(conn);
-	}
-	else
-	{
-		/* this is the only table we need to replicate */
-		char *replication_set = get_default_bdr_replication_set(conn);
-
-		/*
-		 * this probably won't happen, but we need to be sure we're using
-		 * the replication set metadata correctly...
-		 */
-		if (conn == NULL)
-		{
-			log_error(_("unable to retrieve default BDR replication set"));
-			log_hint(_("see preceding messages"));
-			log_debug("check query in get_default_bdr_replication_set()");
-			exit(ERR_BAD_CONFIG);
-		}
-
-		if (is_table_in_bdr_replication_set(conn, "nodes", replication_set) == false)
-		{
-			add_table_to_bdr_replication_set(conn, "nodes", replication_set);
-		}
-
-		pfree(replication_set);
-	}
+	add_extension_tables_to_bdr_replication_set(conn);
 
 	initPQExpBuffer(&event_details);
 

repmgr-action-cluster.c

@@ -83,8 +83,6 @@ do_cluster_show(void)
 	int			i = 0;
 	ItemList	warnings = {NULL, NULL};
 	bool		success = false;
-	bool		error_found = false;
-	bool		connection_error_found = false;
 
 	/* Connect to local database to obtain cluster connection data */
 	log_verbose(LOG_INFO, _("connecting to database"));
@@ -142,26 +140,14 @@ do_cluster_show(void)
 		}
 		else
 		{
+			char		error[MAXLEN];
+
+			strncpy(error, PQerrorMessage(cell->node_info->conn), MAXLEN);
 			cell->node_info->node_status = NODE_STATUS_DOWN;
 			cell->node_info->recovery_type = RECTYPE_UNKNOWN;
-
-			connection_error_found = true;
-
-			if (runtime_options.verbose)
-			{
-				char		error[MAXLEN];
-
-				strncpy(error, PQerrorMessage(cell->node_info->conn), MAXLEN);
-				item_list_append_format(&warnings,
-										"when attempting to connect to node \"%s\" (ID: %i), following error encountered :\n\"%s\"",
-										cell->node_info->node_name, cell->node_info->node_id, trim(error));
-			}
-			else
-			{
-				item_list_append_format(&warnings,
-										"unable to  connect to node \"%s\" (ID: %i)",
-										cell->node_info->node_name, cell->node_info->node_id);
-			}
+			item_list_append_format(&warnings,
+									"when attempting to connect to node \"%s\" (ID: %i), following error encountered :\n\"%s\"",
+									cell->node_info->node_name, cell->node_info->node_id, trim(error));
 		}
 
 		initPQExpBuffer(&details);
@@ -232,7 +218,6 @@ do_cluster_show(void)
 						else
 						{
 							appendPQExpBuffer(&details, "- failed");
-							error_found = true;
 						}
 					}
 				}
@@ -296,7 +281,6 @@ do_cluster_show(void)
 						else
 						{
 							appendPQExpBuffer(&details, "- failed");
-							error_found = true;
 						}
 					}
 				}
@@ -308,27 +292,17 @@ do_cluster_show(void)
 					if (cell->node_info->node_status == NODE_STATUS_UP)
 					{
 						if (cell->node_info->active == true)
-						{
 							appendPQExpBuffer(&details, "* running");
-						}
 						else
-						{
 							appendPQExpBuffer(&details, "! running");
-							error_found = true;
-						}
 					}
 					/* node is unreachable */
 					else
 					{
 						if (cell->node_info->active == true)
-						{
 							appendPQExpBuffer(&details, "? unreachable");
-						}
 						else
-						{
 							appendPQExpBuffer(&details, "- failed");
-							error_found = true;
-						}
 					}
 				}
 				break;
@@ -336,7 +310,6 @@ do_cluster_show(void)
 				{
 					/* this should never happen */
 					appendPQExpBuffer(&details, "? unknown node type");
-						error_found = true;
 				}
 				break;
 		}
@@ -441,6 +414,7 @@ do_cluster_show(void)
 	PQfinish(conn);
 
 	/* emit any warnings */
+
 	if (warnings.head != NULL && runtime_options.terse == false && runtime_options.output_mode != OM_CSV)
 	{
 		ItemListCell *cell = NULL;
@@ -450,25 +424,6 @@ do_cluster_show(void)
 		{
 			printf(_("  - %s\n"), cell->string);
 		}
-
-		if (runtime_options.verbose == false && connection_error_found == true)
-		{
-			log_hint(_("execute with --verbose option to see connection error messages"));
-		}
-	}
-
-	/*
-	 * If warnings were noted, even if they're not displayed (e.g. in --csv node),
-	 * that means something's not right so we need to emit a non-zero exit code.
-	 */
-	if (warnings.head != NULL)
-	{
-		error_found = true;
-	}
-
-	if (error_found == true)
-	{
-		exit(ERR_NODE_STATUS);
 	}
 }
 
@@ -481,7 +436,6 @@ do_cluster_show(void)
  *   --all
  *   --node-[id|name]
  *   --event
- *   --csv
  */
 
 void
@@ -526,12 +480,8 @@ do_cluster_event(void)
 	strncpy(headers_event[EV_TIMESTAMP].title, _("Timestamp"), MAXLEN);
 	strncpy(headers_event[EV_DETAILS].title, _("Details"), MAXLEN);
 
-	/*
-	 * If --terse or --csv provided, simply omit the "Details" column.
-	 * In --csv mode we'd need to quote/escape the contents "Details" column,
-	 * which is doable but which will remain a TODO for now.
-	 */
-	if (runtime_options.terse == true || runtime_options.output_mode == OM_CSV)
+	/* if --terse provided, simply omit the "Details" column */
+	if (runtime_options.terse == true)
 		column_count --;
 
 	for (i = 0; i < column_count; i++)
@@ -554,64 +504,47 @@ do_cluster_event(void)
 
 	}
 
-	if (runtime_options.output_mode == OM_TEXT)
+	for (i = 0; i < column_count; i++)
 	{
-		for (i = 0; i < column_count; i++)
-		{
-			if (i == 0)
-				printf(" ");
-			else
-				printf(" | ");
+		if (i == 0)
+			printf(" ");
+		else
+			printf(" | ");
 
-			printf("%-*s",
-				   headers_event[i].max_length,
-				   headers_event[i].title);
-		}
-		printf("\n");
-		printf("-");
-		for (i = 0; i < column_count; i++)
-		{
-			int			j;
-
-			for (j = 0; j < headers_event[i].max_length; j++)
-				printf("-");
-
-			if (i < (column_count - 1))
-				printf("-+-");
-			else
-				printf("-");
-		}
-
-		printf("\n");
+		printf("%-*s",
+			   headers_event[i].max_length,
+			   headers_event[i].title);
 	}
+	printf("\n");
+	printf("-");
+	for (i = 0; i < column_count; i++)
+	{
+		int			j;
+
+		for (j = 0; j < headers_event[i].max_length; j++)
+			printf("-");
+
+		if (i < (column_count - 1))
+			printf("-+-");
+		else
+			printf("-");
+	}
+
+	printf("\n");
 
 	for (i = 0; i < PQntuples(res); i++)
 	{
 		int			j;
 
-		if (runtime_options.output_mode == OM_CSV)
+		printf(" ");
+		for (j = 0; j < column_count; j++)
 		{
-			for (j = 0; j < column_count; j++)
-			{
-				printf("%s", PQgetvalue(res, i, j));
-				if ((j + 1) < column_count)
-				{
-					printf(",");
-				}
-			}
-		}
-		else
-		{
-			printf(" ");
-			for (j = 0; j < column_count; j++)
-			{
-				printf("%-*s",
-					   headers_event[j].max_length,
-					   PQgetvalue(res, i, j));
+			printf("%-*s",
+				   headers_event[j].max_length,
+				   PQgetvalue(res, i, j));
 
-				if (j < (column_count - 1))
-					printf(" | ");
-			}
+			if (j < (column_count - 1))
+				printf(" | ");
 		}
 
 		printf("\n");
@@ -621,8 +554,7 @@ do_cluster_event(void)
 
 	PQfinish(conn);
 
-	if (runtime_options.output_mode == OM_TEXT)
-		puts("");
+	puts("");
 }
 
 
@@ -637,8 +569,6 @@ do_cluster_crosscheck(void)
 
 	t_node_status_cube **cube;
 
-	bool		error_found = false;
-
 	n = build_cluster_crosscheck(&cube, &name_length);
 	if (runtime_options.output_mode == OM_CSV)
 	{
@@ -718,11 +648,9 @@ do_cluster_crosscheck(void)
 				{
 					case -2:
 						c = '?';
-						error_found = true;
 						break;
 					case -1:
 						c = 'x';
-						error_found = true;
 						break;
 					case 0:
 						c = '*';
@@ -761,11 +689,6 @@ do_cluster_crosscheck(void)
 
 		free(cube);
 	}
-
-	if (error_found == true)
-	{
-		exit(ERR_NODE_STATUS);
-	}
 }
 
 
@@ -781,8 +704,6 @@ do_cluster_matrix()
 
 	t_node_matrix_rec **matrix_rec_list;
 
-	bool		error_found = false;
-
 	n = build_cluster_matrix(&matrix_rec_list, &name_length);
 
 	if (runtime_options.output_mode == OM_CSV)
@@ -821,11 +742,9 @@ do_cluster_matrix()
 				{
 					case -2:
 						c = '?';
-						error_found = true;
 						break;
 					case -1:
 						c = 'x';
-						error_found = true;
 						break;
 					case 0:
 						c = '*';
@@ -851,11 +770,6 @@ do_cluster_matrix()
 	}
 
 	free(matrix_rec_list);
-
-	if (error_found == true)
-	{
-		exit(ERR_NODE_STATUS);
-	}
 }
 
 
@@ -1050,7 +964,8 @@ build_cluster_matrix(t_node_matrix_rec ***matrix_rec_dest, int *name_length)
 
 		initPQExpBuffer(&command_output);
 
-		(void) remote_command(host,
+		(void) remote_command(
+							  host,
 							  runtime_options.remote_user,
 							  command.data,
 							  &command_output);
@@ -1229,8 +1144,9 @@ build_cluster_crosscheck(t_node_status_cube ***dest_cube, int *name_length)
 		/* fix to work with --node-id */
 		if (cube[i]->node_id == config_file_options.node_id)
 		{
-			(void) local_command_simple(command.data,
-										&command_output);
+			(void) local_command(
+								 command.data,
+								 &command_output);
 		}
 		else
 		{
@@ -1254,7 +1170,8 @@ build_cluster_crosscheck(t_node_status_cube ***dest_cube, int *name_length)
 
 			log_verbose(LOG_DEBUG, "build_cluster_crosscheck(): executing\n  %s", quoted_command.data);
 
-			(void) remote_command(host,
+			(void) remote_command(
+								  host,
 								  runtime_options.remote_user,
 								  quoted_command.data,
 								  &command_output);
@@ -1350,7 +1267,6 @@ do_cluster_cleanup(void)
 	PGconn	   *conn = NULL;
 	PGconn	   *primary_conn = NULL;
 	int			entries_to_delete = 0;
-	PQExpBufferData event_details;
 
 	conn = establish_db_connection(config_file_options.conninfo, true);
 
@@ -1364,13 +1280,7 @@ do_cluster_cleanup(void)
 
 	entries_to_delete = get_number_of_monitoring_records_to_delete(primary_conn, runtime_options.keep_history);
 
-	if (entries_to_delete < 0)
-	{
-		log_error(_("unable to query number of monitoring records to clean up"));
-		PQfinish(primary_conn);
-		exit(ERR_DB_QUERY);
-	}
-	else if (entries_to_delete == 0)
+	if (entries_to_delete == 0)
 	{
 		log_info(_("no monitoring records to delete"));
 		PQfinish(primary_conn);
@@ -1380,23 +1290,10 @@ do_cluster_cleanup(void)
 	log_debug("at least %i monitoring records for deletion",
 			  entries_to_delete);
 
-	initPQExpBuffer(&event_details);
-
 	if (delete_monitoring_records(primary_conn, runtime_options.keep_history) == false)
 	{
-		appendPQExpBuffer(&event_details,
-						  _("unable to delete monitoring records"));
-
-		log_error("%s", event_details.data);
+		log_error(_("unable to delete monitoring records"));
 		log_detail("%s", PQerrorMessage(primary_conn));
-
-		create_event_notification(primary_conn,
-								  &config_file_options,
-								  config_file_options.node_id,
-								  "cluster_cleanup",
-								  false,
-								  event_details.data);
-
 		PQfinish(primary_conn);
 		exit(ERR_DB_QUERY);
 	}
@@ -1408,22 +1305,7 @@ do_cluster_cleanup(void)
 		log_detail("%s", PQerrorMessage(primary_conn));
 	}
 
-	appendPQExpBuffer(&event_details,
-					  _("monitoring records deleted"));
 
-	if (runtime_options.keep_history > 0)
-		appendPQExpBuffer(&event_details,
-						  _("; records newer than %i day(s) retained"),
-						  runtime_options.keep_history);
-
-	create_event_notification(primary_conn,
-							  &config_file_options,
-							  config_file_options.node_id,
-							  "cluster_cleanup",
-							  true,
-							  event_details.data);
-
-	termPQExpBuffer(&event_details);
 	PQfinish(primary_conn);
 
 	if (runtime_options.keep_history > 0)
@@ -1450,7 +1332,6 @@ do_cluster_help(void)
 	printf(_("    %s [OPTIONS] cluster matrix\n"), progname());
 	printf(_("    %s [OPTIONS] cluster crosscheck\n"), progname());
 	printf(_("    %s [OPTIONS] cluster event\n"), progname());
-	printf(_("    %s [OPTIONS] cluster cleanup\n"), progname());
 	puts("");
 
 	printf(_("CLUSTER SHOW\n"));
@@ -1490,7 +1371,6 @@ do_cluster_help(void)
 	printf(_("    --event                   filter specific event\n"));
 	printf(_("    --node-id                 restrict entries to node with this ID\n"));
 	printf(_("    --node-name               restrict entries to node with this name\n"));
-	printf(_("    --csv                     emit output as CSV\n"));
 	puts("");
 
 	printf(_("CLUSTER CLEANUP\n"));

repmgr-action-primary.c

@@ -64,10 +64,12 @@ do_primary_register(void)
 			PQfinish(conn);
 			exit(ERR_BAD_CONFIG);
 		}
-
-		log_error(_("unable to determine server's recovery type"));
-		PQfinish(conn);
-		exit(ERR_DB_CONN);
+		else
+		{
+			log_error(_("connection to node lost"));
+			PQfinish(conn);
+			exit(ERR_DB_CONN);
+		}
 	}
 
 	log_verbose(LOG_INFO, _("server is not in recovery"));

repmgr-action-witness.c

@@ -65,7 +65,7 @@ do_witness_register(void)
 	if (recovery_type == RECTYPE_STANDBY)
 	{
 		log_error(_("provided node is a standby"));
-		log_hint(_("a witness node must run on an independent primary server"));
+		log_error(_("a witness node must run on an independent primary server"));
 
 		PQfinish(witness_conn);
 
@@ -86,7 +86,6 @@ do_witness_register(void)
 
 	/* connect to primary with provided parameters */
 	log_info(_("connecting to primary node"));
-
 	/*
 	 * Extract the repmgr user and database names from the conninfo string
 	 * provided in repmgr.conf
@@ -136,11 +135,8 @@ do_witness_register(void)
 		exit(ERR_BAD_CONFIG);
 	}
 
-	/*
-	 * TODO: sanity check witness node is not part of main cluster; we could
-	 * add a random application_name to the respective connections,
-	 * and do a simple check of pg_stat_activity
-	 */
+	/* XXX sanity check witness node is not part of main cluster */
+
 
 	/* create repmgr extension, if does not exist */
 	if (runtime_options.dry_run == false &&  !create_repmgr_extension(witness_conn))
@@ -186,6 +182,7 @@ do_witness_register(void)
 			log_error(_("witness node is already registered"));
 			log_hint(_("use option -F/--force to reregister the node"));
 
+
 			PQfinish(witness_conn);
 			PQfinish(primary_conn);
 
@@ -193,26 +190,8 @@ do_witness_register(void)
 		}
 	}
 
-	/*
-	 * Check that an active node with the same node_name doesn't exist already
-	 */
 
-	record_status = get_node_record_by_name(primary_conn,
-											config_file_options.node_name,
-											&node_record);
-
-
-	if (record_status == RECORD_FOUND)
-	{
-		if (node_record.active == true && node_record.node_id != config_file_options.node_id)
-		{
-			log_error(_("node %i exists already with node_name \"%s\""),
-					  node_record.node_id,
-					  config_file_options.node_name);
-			PQfinish(primary_conn);
-			exit(ERR_BAD_CONFIG);
-		}
-	}
+	// XXX check other node with same name does not exist
 
 	/*
 	 * if repmgr.nodes contains entries, delete if -F/--force provided,
@@ -243,7 +222,6 @@ do_witness_register(void)
 		PQfinish(witness_conn);
 		exit(SUCCESS);
 	}
-
 	/* create record on primary */
 
 	/*
@@ -310,59 +288,55 @@ do_witness_register(void)
 void
 do_witness_unregister(void)
 {
-	PGconn	   *local_conn = NULL;
+	PGconn	   *witness_conn = NULL;
 	PGconn	   *primary_conn = NULL;
 	t_node_info node_record = T_NODE_INFO_INITIALIZER;
 	RecordStatus record_status = RECORD_NOT_FOUND;
 	bool		node_record_deleted = false;
-	bool		local_node_available = true;
-	int			witness_node_id = UNKNOWN_NODE_ID;
+	bool		witness_available = true;
 
-	if (runtime_options.node_id != UNKNOWN_NODE_ID)
-	{
-		/* user has specified the witness node id */
-		witness_node_id = runtime_options.node_id;
-	}
-	else
-	{
-		/* assume witness node is local node */
-		witness_node_id = config_file_options.node_id;
-	}
-
-	log_info(_("connecting to node \"%s\" (ID: %i)"),
+	log_info(_("connecting to witness node \"%s\" (ID: %i)"),
 			 config_file_options.node_name,
 			 config_file_options.node_id);
 
-	local_conn = establish_db_connection_quiet(config_file_options.conninfo);
+	witness_conn = establish_db_connection_quiet(config_file_options.conninfo);
 
-	if (PQstatus(local_conn) != CONNECTION_OK)
+	if (PQstatus(witness_conn) != CONNECTION_OK)
 	{
 		if (!runtime_options.force)
 		{
-			log_error(_("unable to connect to node \"%s\" (ID: %i)"),
+			log_error(_("unable to connect to witness node \"%s\" (ID: %i)"),
 					  config_file_options.node_name,
 					  config_file_options.node_id);
-			log_detail("%s", PQerrorMessage(local_conn));
+			log_detail("%s", PQerrorMessage(witness_conn));
+			log_hint(_("provide -F/--force to remove the witness record if the server is not running"));
 			exit(ERR_BAD_CONFIG);
 		}
 
 		log_notice(_("unable to connect to witness node \"%s\" (ID: %i), removing node record on cluster primary only"),
 				   config_file_options.node_name,
 				   config_file_options.node_id);
-		local_node_available = false;
+		witness_available = false;
 	}
 
-	if (local_node_available == true)
+	if (witness_available == true)
 	{
-		primary_conn = get_primary_connection_quiet(local_conn, NULL, NULL);
+		primary_conn = get_primary_connection_quiet(witness_conn, NULL, NULL);
 	}
 	else
 	{
 		/*
-		 * Assume user has provided connection details for the primary server
+		 * Extract the repmgr user and database names from the conninfo string
+		 * provided in repmgr.conf
 		 */
+		get_conninfo_value(config_file_options.conninfo, "user", repmgr_user);
+		get_conninfo_value(config_file_options.conninfo, "dbname", repmgr_db);
+
+		param_set_ine(&source_conninfo, "user", repmgr_user);
+		param_set_ine(&source_conninfo, "dbname", repmgr_db);
 
 		primary_conn = establish_db_connection_by_params(&source_conninfo, false);
+
 	}
 
 	if (PQstatus(primary_conn) != CONNECTION_OK)
@@ -370,26 +344,26 @@ do_witness_unregister(void)
 		log_error(_("unable to connect to primary"));
 		log_detail("%s", PQerrorMessage(primary_conn));
 
-		if (local_node_available == true)
+		if (witness_available == true)
 		{
-			PQfinish(local_conn);
+			PQfinish(witness_conn);
 		}
-		else if (runtime_options.connection_param_provided == false)
+		else
 		{
-			log_hint(_("provide connection details for the primary server"));
+			log_hint(_("provide connection details to primary server"));
 		}
 		exit(ERR_BAD_CONFIG);
 	}
 
 	/* Check node exists and is really a witness */
-	record_status = get_node_record(primary_conn, witness_node_id, &node_record);
+	record_status = get_node_record(primary_conn, config_file_options.node_id, &node_record);
 
 	if (record_status != RECORD_FOUND)
 	{
-		log_error(_("no record found for node %i"), witness_node_id);
+		log_error(_("no record found for node %i"), config_file_options.node_id);
 
-		if (local_node_available == true)
-			PQfinish(local_conn);
+		if (witness_available == true)
+			PQfinish(witness_conn);
 		PQfinish(primary_conn);
 
 		exit(ERR_BAD_CONFIG);
@@ -397,17 +371,11 @@ do_witness_unregister(void)
 
 	if (node_record.type != WITNESS)
 	{
-		/*
-		 * The node (either explicitly provided with --node-id, or the local node)
-		 * is not a witness.
-		 *
-		 * TODO: scan node list and print hint about identity of known witness servers.
-		 */
 		log_error(_("node %i is not a witness node"), config_file_options.node_id);
 		log_detail(_("node %i is a %s node"), config_file_options.node_id, get_node_type_string(node_record.type));
 
-		if (local_node_available == true)
-			PQfinish(local_conn);
+		if (witness_available == true)
+			PQfinish(witness_conn);
 		PQfinish(primary_conn);
 
 		exit(ERR_BAD_CONFIG);
@@ -416,43 +384,49 @@ do_witness_unregister(void)
 	if (runtime_options.dry_run == true)
 	{
 		log_info(_("prerequisites for unregistering the witness node are met"));
-		if (local_node_available == true)
-			PQfinish(local_conn);
+		if (witness_available == true)
+			PQfinish(witness_conn);
 		PQfinish(primary_conn);
 
 		exit(SUCCESS);
 	}
 
-	log_info(_("unregistering witness node %i"), witness_node_id);
+	log_info(_("unregistering witness node %i"), config_file_options.node_id);
 	node_record_deleted = delete_node_record(primary_conn,
-										     witness_node_id);
+										     config_file_options.node_id);
 
 	if (node_record_deleted == false)
 	{
 		PQfinish(primary_conn);
+		PQfinish(witness_conn);
+		exit(ERR_BAD_CONFIG);
+	}
 
-		if (local_node_available == true)
-			PQfinish(local_conn);
-		PQfinish(local_conn);
+	/* sync records from primary */
+	if (witness_available == true && witness_copy_node_records(primary_conn, witness_conn) == false)
+	{
+		log_error(_("unable to copy repmgr node records from primary"));
+		PQfinish(primary_conn);
+		PQfinish(witness_conn);
 		exit(ERR_BAD_CONFIG);
 	}
 
 	/* Log the event */
 	create_event_record(primary_conn,
 						&config_file_options,
-						witness_node_id,
+						config_file_options.node_id,
 						"witness_unregister",
 						true,
 						NULL);
 
 	PQfinish(primary_conn);
 
-	if (local_node_available == true)
-		PQfinish(local_conn);
+	if (witness_available == true)
+		PQfinish(witness_conn);
 
 	log_info(_("witness unregistration complete"));
-	log_detail(_("witness node with ID %i successfully unregistered"),
-			    witness_node_id);
+	log_detail(_("witness node with id %i (conninfo: %s) successfully unregistered"),
+			    config_file_options.node_id, config_file_options.conninfo);
 
 	return;
 }
@@ -472,19 +446,16 @@ void do_witness_help(void)
 	puts("");
 	printf(_("  Requires provision of connection information for the primary\n"));
 	puts("");
-	printf(_("  --dry-run                check prerequisites but don't make any changes\n"));
-	printf(_("  -F, --force              overwrite an existing node record\n"));
+	printf(_("  --dry-run                           check prerequisites but don't make any changes\n"));
+	printf(_("  -F, --force                         overwrite an existing node record\n"));
 	puts("");
 
 	printf(_("WITNESS UNREGISTER\n"));
 	puts("");
 	printf(_("  \"witness register\" unregisters a witness node.\n"));
 	puts("");
-	printf(_("  --dry-run                check prerequisites but don't make any changes\n"));
-	printf(_("  -F, --force              unregister when witness node not running\n"));
-	printf(_("  --node-id                node ID of the witness node (provide if executing on\n"));
-	printf(_("                             another node)\n"));
-
+	printf(_("  --dry-run                           check prerequisites but don't make any changes\n"));
+	printf(_("  -F, --force                         unregister when witness node not running\n"));
 	puts("");
 
 	return;

repmgr-client-global.h

@@ -42,12 +42,10 @@ typedef struct
 	bool		force;
 	char		pg_bindir[MAXLEN];	/* overrides setting in repmgr.conf */
 	bool		wait;
-	bool		no_wait;
 
 	/* logging options */
 	char		log_level[MAXLEN];	/* overrides setting in repmgr.conf */
 	bool		log_to_file;
-	bool		quiet;
 	bool		terse;
 	bool		verbose;
 
@@ -82,7 +80,6 @@ typedef struct
 	char		replication_user[MAXLEN];
 	char		upstream_conninfo[MAXLEN];
 	bool		without_barman;
-	bool		recovery_conf_only;
 
 	/* "standby clone"/"standby follow" options */
 	int			upstream_node_id;
@@ -94,8 +91,7 @@ typedef struct
 
 	/* "standby switchover" options */
 	bool		always_promote;
-	bool		force_rewind_used;
-	char		force_rewind_path[MAXPGPATH];
+	bool		force_rewind;
 	bool		siblings_follow;
 
 	/* "node status" options */
@@ -107,7 +103,6 @@ typedef struct
 	bool		replication_lag;
 	bool		role;
 	bool		slots;
-	bool		missing_slots;
 	bool		has_passfile;
 	bool		replication_connection;
 
@@ -137,30 +132,30 @@ typedef struct
 		/* configuration metadata */ \
 		false, false, false, false,	\
 		/* general configuration options */	\
-		"", false, false, "", false, false,	\
+		"", false, false, "", false,	\
 		/* logging options */ \
-		"", false, false, false, false,	\
+		"", false, false, false, \
 		/* output options */ \
 		false, false, false,  \
 		/* database connection options */ \
-		"", "", "",	"", \
+		"", "", "",	"",				  \
 		/* other connection options */ \
-		"",	"", \
+		"",	"",  \
 		/* general node options */ \
 		UNKNOWN_NODE_ID, "", "", UNKNOWN_NODE_ID, \
 		/* "standby clone" options */ \
 		false, CONFIG_FILE_SAMEPATH, false, false, false, "", "", "", \
-		false, false, \
+		false,  \
 		/* "standby clone"/"standby follow" options */ \
 		NO_UPSTREAM_NODE, \
 		/* "standby register" options */ \
-		false, -1, DEFAULT_WAIT_START,   \
+		false, 0, DEFAULT_WAIT_START,   \
 		/* "standby switchover" options */ \
-		false, false, "", false,		   \
+		false, false, false, \
 		/* "node status" options */ \
 		false, \
 		/* "node check" options */ \
-		false, false, false, false, false, false, false, false,	\
+		false, false, false, false, false, false, false, \
 		/* "node join" options */ \
 		"", \
 		/* "node service" options */ \
@@ -169,7 +164,7 @@ typedef struct
 		false, "", CLUSTER_EVENT_LIMIT,	\
 		/* "cluster cleanup" options */ \
 		0, \
-		/* following options for internal use */ \
+		/* Following options for internal use */ \
 		"/tmp", OM_TEXT	\
 }
 
@@ -212,7 +207,6 @@ extern void check_93_config(void);
 extern bool create_repmgr_extension(PGconn *conn);
 extern int	test_ssh_connection(char *host, char *remote_user);
 extern bool local_command(const char *command, PQExpBufferData *outputbuf);
-extern bool local_command_simple(const char *command, PQExpBufferData *outputbuf);
 
 extern standy_clone_mode get_standby_clone_mode(void);
 
@@ -233,10 +227,7 @@ extern void print_help_header(void);
 /* server control functions */
 extern void get_server_action(t_server_action action, char *script, char *data_dir);
 extern bool data_dir_required_for_action(t_server_action action);
-extern void get_node_config_directory(char *config_dir_buf);
 extern void get_node_data_directory(char *data_dir_buf);
 extern void init_node_record(t_node_info *node_record);
-extern bool can_use_pg_rewind(PGconn *conn, const char *data_directory, PQExpBufferData *reason);
-extern void drop_replication_slot_if_exists(PGconn *conn, int node_id, char *slot_name);
 
 #endif							/* _REPMGR_CLIENT_GLOBAL_H_ */

repmgr-client.c

@@ -53,7 +53,6 @@
 
 #include "repmgr.h"
 #include "compat.h"
-#include "controldata.h"
 #include "repmgr-client.h"
 #include "repmgr-client-global.h"
 #include "repmgr-action-primary.h"
@@ -91,14 +90,13 @@ t_node_info target_node_info = T_NODE_INFO_INITIALIZER;
 static ItemList cli_errors = {NULL, NULL};
 static ItemList cli_warnings = {NULL, NULL};
 
-static bool _local_command(const char *command, PQExpBufferData *outputbuf, bool simple);
 
 int
 main(int argc, char **argv)
 {
 	t_conninfo_param_list default_conninfo = T_CONNINFO_PARAM_LIST_INITIALIZER;
 
-	int			optindex = 0;
+	int			optindex;
 	int			c;
 
 	char	   *repmgr_command = NULL;
@@ -108,7 +106,6 @@ main(int argc, char **argv)
 	char	   *dummy_action = "";
 
 	bool		help_option = false;
-	bool		option_error_found = false;
 
 	set_progname(argv[0]);
 
@@ -179,10 +176,7 @@ main(int argc, char **argv)
 		strncpy(runtime_options.username, pw->pw_name, MAXLEN);
 	}
 
-	/* Make getopt emitting errors */
-	opterr = 1;
-
-	while ((c = getopt_long(argc, argv, "?Vb:f:FwWd:h:p:U:R:S:D:ck:L:qtvC:", long_options,
+	while ((c = getopt_long(argc, argv, "?Vb:f:FWd:h:p:U:R:S:D:ckL:tvC:", long_options,
 							&optindex)) != -1)
 	{
 		/*
@@ -200,7 +194,13 @@ main(int argc, char **argv)
 			case OPT_HELP:		/* --help */
 				help_option = true;
 				break;
-
+			case '?':
+				/* Actual help option given */
+				if (strcmp(argv[optind - 1], "-?") == 0)
+				{
+					help_option = true;
+				}
+				break;
 			case 'V':
 
 				/*
@@ -241,14 +241,9 @@ main(int argc, char **argv)
 				strncpy(runtime_options.replication_user, optarg, MAXLEN);
 				break;
 
-				/* -w/--wait */
-			case 'w':
-				runtime_options.wait = true;
-				break;
-
-				/* -W/--no-wait */
+				/* -W/--wait */
 			case 'W':
-				runtime_options.no_wait = true;
+				runtime_options.wait = true;
 				break;
 
 				/*----------------------------
@@ -393,11 +388,6 @@ main(int argc, char **argv)
 				runtime_options.without_barman = true;
 				break;
 
-			case OPT_RECOVERY_CONF_ONLY:
-				runtime_options.recovery_conf_only = true;
-				break;
-
-
 				/*---------------------------
 				 * "standby register" options
 				 *---------------------------
@@ -425,13 +415,7 @@ main(int argc, char **argv)
 				break;
 
 			case OPT_FORCE_REWIND:
-				runtime_options.force_rewind_used = true;
-
-				if (optarg != NULL)
-				{
-					strncpy(runtime_options.force_rewind_path, optarg, MAXPGPATH);
-				}
-
+				runtime_options.force_rewind = true;
 				break;
 
 			case OPT_SIBLINGS_FOLLOW:
@@ -471,10 +455,6 @@ main(int argc, char **argv)
 				runtime_options.slots = true;
 				break;
 
-			case OPT_MISSING_SLOTS:
-				runtime_options.missing_slots = true;
-				break;
-
 			case OPT_HAS_PASSFILE:
 				runtime_options.has_passfile = true;
 				break;
@@ -574,12 +554,6 @@ main(int argc, char **argv)
 				logger_output_mode = OM_DAEMON;
 				break;
 
-
-				/* --quiet */
-			case 'q':
-				runtime_options.quiet = true;
-				break;
-
 				/* --terse */
 			case 't':
 				runtime_options.terse = true;
@@ -635,29 +609,14 @@ main(int argc, char **argv)
 								 _("--recovery-min-apply-delay is now a configuration file parameter, \"recovery_min_apply_delay\""));
 				break;
 
-			case ':':   /* missing option argument */
-				option_error_found = true;
-				break;
-			case '?':
-				/* Actual help option given? */
-				if (strcmp(argv[optind - 1], "-?") == 0)
-				{
-					help_option = true;
-					break;
-				}
-				/* otherwise fall through to default */
-			default:    /* invalid option */
-				option_error_found = true;
-				break;
 		}
 	}
 
-
 	/*
 	 * If -d/--dbname appears to be a conninfo string, validate by attempting
 	 * to parse it (and if successful, store the parsed parameters)
 	 */
-	if (runtime_options.dbname[0])
+	if (runtime_options.dbname)
 	{
 		if (strncmp(runtime_options.dbname, "postgresql://", 13) == 0 ||
 			strncmp(runtime_options.dbname, "postgres://", 11) == 0 ||
@@ -753,10 +712,9 @@ main(int argc, char **argv)
 	if (cli_errors.head != NULL)
 	{
 		free_conninfo_params(&source_conninfo);
-		exit_with_cli_errors(&cli_errors, NULL);
+		exit_with_cli_errors(&cli_errors);
 	}
 
-
 	/*----------
 	 * Determine the node type and action; following are valid:
 	 *
@@ -1003,30 +961,9 @@ main(int argc, char **argv)
 	if (cli_errors.head != NULL)
 	{
 		free_conninfo_params(&source_conninfo);
-
-		exit_with_cli_errors(&cli_errors, valid_repmgr_command_found == true ? repmgr_command : NULL);
+		exit_with_cli_errors(&cli_errors);
 	}
 
-	/* no errors detected by repmgr, but getopt might have */
-	if (option_error_found == true)
-	{
-		if (valid_repmgr_command_found == true)
-		{
-			printf(_("Try \"%s --help\" or \"%s %s --help\" for more information.\n"),
-				   progname(),
-				   progname(),
-				   repmgr_command);
-		}
-		else
-		{
-			printf(_("Try \"repmgr --help\" for more information.\n"));
-		}
-
-		free_conninfo_params(&source_conninfo);
-		exit(ERR_BAD_CONFIG);
-	}
-
-
 	/*
 	 * Print any warnings about inappropriate command line options, unless
 	 * -t/--terse set
@@ -1055,10 +992,32 @@ main(int argc, char **argv)
 		runtime_options.output_mode = OM_OPTFORMAT;
 	}
 
+
+
+	/* check for conflicts between runtime options and configuration file */
+	/* ================================================================== */
+
+	if (action == STANDBY_CLONE)
+	{
+		standy_clone_mode mode = get_standby_clone_mode();
+
+		if (mode == barman && runtime_options.without_barman == false
+			&& config_file_options.use_replication_slots == true)
+		{
+			log_error(_("STANDBY CLONE in Barman mode is incompatible with configuration option \"use_replication_slots\""));
+			log_hint(_("set \"use_replication_slots\" to \"no\" in repmgr.conf, or use --without-barman to clone directly from the upstream server"));
+			exit(ERR_BAD_CONFIG);
+		}
+	}
+
+
 	/*
 	 * Check for configuration file items which can be overriden by runtime
 	 * options
-	 * =====================================================================
+	 */
+
+	/*
+	 * ============================================================================
 	 */
 
 	/*
@@ -1112,28 +1071,6 @@ main(int argc, char **argv)
 	if (runtime_options.terse)
 		logger_set_terse();
 
-	/*
-	 * If --dry-run specified, ensure log_level is at least LOG_INFO, regardless
-	 * of what's in the configuration file or -L/--log-level paremeter, otherwise
-	 * some or output might not be displayed.
-	 */
-	if (runtime_options.dry_run == true)
-	{
-		logger_set_min_level(LOG_INFO);
-	}
-
-	/*
-	 * If -q/--quiet supplied, suppress any non-ERROR log output.
-	 * This overrides everything else; we'll leave it up to the user to deal with the
-	 * consequences of e.g. running --dry-run together with -q/--quiet.
-	 */
-	if (runtime_options.quiet == true)
-	{
-		logger_set_level(LOG_ERROR);
-	}
-
-
-
 	/*
 	 * Node configuration information is not needed for all actions, with
 	 * STANDBY CLONE being the main exception.
@@ -1394,15 +1331,6 @@ check_cli_parameters(const int action)
 										 _("--no-upstream-connection only effective in Barman mode"));
 					}
 				}
-
-				if (strlen(config_file_options.config_directory))
-				{
-					if (runtime_options.copy_external_config_files == false)
-					{
-						item_list_append(&cli_warnings,
-										 _("\"config_directory\" set in repmgr.conf, but --copy-external-config-files not provided"));
-					}
-				}
 			}
 			break;
 
@@ -1519,7 +1447,6 @@ check_cli_parameters(const int action)
 		{
 			case PRIMARY_UNREGISTER:
 			case STANDBY_UNREGISTER:
-			case WITNESS_UNREGISTER:
 			case CLUSTER_EVENT:
 			case CLUSTER_MATRIX:
 			case CLUSTER_CROSSCHECK:
@@ -1560,7 +1487,6 @@ check_cli_parameters(const int action)
 			case STANDBY_CLONE:
 			case STANDBY_REGISTER:
 			case STANDBY_FOLLOW:
-			case BDR_REGISTER:
 				break;
 			default:
 				item_list_append_format(&cli_warnings,
@@ -1569,39 +1495,6 @@ check_cli_parameters(const int action)
 		}
 	}
 
-	if (runtime_options.replication_user[0])
-	{
-		switch (action)
-		{
-			case PRIMARY_REGISTER:
-			case STANDBY_REGISTER:
-			case STANDBY_CLONE:
-				break;
-
-			case STANDBY_FOLLOW:
-				item_list_append_format(&cli_warnings,
-										_("--replication-user ignored when executing %s"),
-										action_name(action));
-			default:
-				item_list_append_format(&cli_warnings,
-										_("--replication-user not required when executing %s"),
-										action_name(action));
-		}
-	}
-
-	if (runtime_options.recovery_conf_only == true)
-	{
-		switch (action)
-		{
-			case STANDBY_CLONE:
-				break;
-			default:
-				item_list_append_format(&cli_warnings,
-										_("--create-recovery-conf will be ignored when executing %s"),
-										action_name(action));
-		}
-	}
-
 	if (runtime_options.event[0])
 	{
 		switch (action)
@@ -1615,6 +1508,25 @@ check_cli_parameters(const int action)
 		}
 	}
 
+	if (runtime_options.replication_user[0])
+	{
+		switch (action)
+		{
+			case PRIMARY_REGISTER:
+			case STANDBY_REGISTER:
+				break;
+			case STANDBY_CLONE:
+			case STANDBY_FOLLOW:
+				item_list_append_format(&cli_warnings,
+										_("--replication-user ignored when executing %s)"),
+										action_name(action));
+			default:
+				item_list_append_format(&cli_warnings,
+										_("--replication-user not required when executing %s"),
+										action_name(action));
+		}
+	}
+
 	if (runtime_options.limit_provided)
 	{
 		switch (action)
@@ -1653,41 +1565,6 @@ check_cli_parameters(const int action)
 		}
 	}
 
-	/* --wait/--no-wait */
-
-	if (runtime_options.wait == true && runtime_options.no_wait == true)
-	{
-		item_list_append_format(&cli_errors,
-								_("both --wait and --no-wait options provided"));
-	}
-	else
-	{
-		if (runtime_options.wait)
-		{
-			switch (action)
-			{
-				case STANDBY_FOLLOW:
-					break;
-				default:
-					item_list_append_format(&cli_warnings,
-											_("--wait will be ignored when executing %s"),
-											action_name(action));
-			}
-		}
-		else if (runtime_options.wait)
-		{
-			switch (action)
-			{
-				case NODE_REJOIN:
-					break;
-				default:
-					item_list_append_format(&cli_warnings,
-											_("--no-wait will be ignored when executing %s"),
-											action_name(action));
-			}
-		}
-	}
-
 	/* repmgr node service --action */
 	if (runtime_options.action[0] != '\0')
 	{
@@ -1729,7 +1606,7 @@ check_cli_parameters(const int action)
 		}
 	}
 
-	if (runtime_options.force_rewind_used == true)
+	if (runtime_options.force_rewind == true)
 	{
 		switch (action)
 		{
@@ -1900,11 +1777,10 @@ do_help(void)
 
 	printf(_("Usage:\n"));
 	printf(_("    %s [OPTIONS] primary {register|unregister}\n"), progname());
-	printf(_("    %s [OPTIONS] standby {register|unregister|clone|promote|follow|switchover}\n"), progname());
+	printf(_("    %s [OPTIONS] standby {register|unregister|clone|promote|follow}\n"), progname());
 	printf(_("    %s [OPTIONS] bdr     {register|unregister}\n"), progname());
-	printf(_("    %s [OPTIONS] node    {status|check|rejoin|service}\n"), progname());
-	printf(_("    %s [OPTIONS] cluster {show|event|matrix|crosscheck|cleanup}\n"), progname());
-	printf(_("    %s [OPTIONS] witness {register|unregister}\n"), progname());
+	printf(_("    %s [OPTIONS] node    status\n"), progname());
+	printf(_("    %s [OPTIONS] cluster {show|event|matrix|crosscheck}\n"), progname());
 
 	puts("");
 
@@ -1952,7 +1828,6 @@ do_help(void)
 	printf(_("  --dry-run                           show what would happen for action, but don't execute it\n"));
 	printf(_("  -L, --log-level                     set log level (overrides configuration file; default: NOTICE)\n"));
 	printf(_("  --log-to-file                       log to file (or logging facility) defined in repmgr.conf\n"));
-	printf(_("  -q, --quiet                         suppress all log output apart from errors\n"));
 	printf(_("  -t, --terse                         don't display detail, hints and other non-critical output\n"));
 	printf(_("  -v, --verbose                       display additional log output (useful for debugging)\n"));
 
@@ -2222,28 +2097,12 @@ test_ssh_connection(char *host, char *remote_user)
 }
 
 
-
-
 /*
  * Execute a command locally. "outputbuf" should either be an
  * initialised PQexpbuffer, or NULL
  */
 bool
 local_command(const char *command, PQExpBufferData *outputbuf)
-{
-	return _local_command(command, outputbuf, false);
-}
-
-
-bool
-local_command_simple(const char *command, PQExpBufferData *outputbuf)
-{
-	return _local_command(command, outputbuf, true);
-}
-
-
-static bool
-_local_command(const char *command, PQExpBufferData *outputbuf, bool simple)
 {
 	FILE	   *fp = NULL;
 	char		output[MAXLEN];
@@ -2270,8 +2129,7 @@ _local_command(const char *command, PQExpBufferData *outputbuf, bool simple)
 	while (fgets(output, MAXLEN, fp) != NULL)
 	{
 		appendPQExpBuffer(outputbuf, "%s", output);
-
-		if (!feof(fp) && simple == false)
+		if (!feof(fp))
 		{
 			break;
 		}
@@ -2293,19 +2151,10 @@ _local_command(const char *command, PQExpBufferData *outputbuf, bool simple)
 }
 
 
-/*
- * get_superuser_connection()
- *
- * Check if provided connection "conn" is a superuser connection, if not attempt to
- * make a superuser connection "superuser_conn" with the provided --superuser parameter.
- *
- * "privileged_conn" is set to whichever connection is the superuser connection.
- */
 void
 get_superuser_connection(PGconn **conn, PGconn **superuser_conn, PGconn **privileged_conn)
 {
 	t_connection_user userinfo = T_CONNECTION_USER_INITIALIZER;
-	t_conninfo_param_list conninfo_params = T_CONNINFO_PARAM_LIST_INITIALIZER;
 	bool		is_superuser = false;
 
 	/* this should never happen */
@@ -2314,7 +2163,6 @@ get_superuser_connection(PGconn **conn, PGconn **superuser_conn, PGconn **privil
 		log_error(_("no database connection available"));
 		exit(ERR_INTERNAL);
 	}
-
 	is_superuser = is_superuser_connection(*conn, &userinfo);
 
 	if (is_superuser == true)
@@ -2332,11 +2180,9 @@ get_superuser_connection(PGconn **conn, PGconn **superuser_conn, PGconn **privil
 		exit(ERR_BAD_CONFIG);
 	}
 
-	initialize_conninfo_params(&conninfo_params, false);
-	conn_to_param_list(*conn, &conninfo_params);
-	param_set(&conninfo_params, "user", runtime_options.superuser);
-
-	*superuser_conn = establish_db_connection_by_params(&conninfo_params, false);
+	*superuser_conn = establish_db_connection_as_user(config_file_options.conninfo,
+													  runtime_options.superuser,
+													  false);
 
 	if (PQstatus(*superuser_conn) != CONNECTION_OK)
 	{
@@ -2356,8 +2202,6 @@ get_superuser_connection(PGconn **conn, PGconn **superuser_conn, PGconn **privil
 		exit(ERR_BAD_CONFIG);
 	}
 
-	log_debug("established superuser connection as \"%s\"", runtime_options.superuser);
-
 	*privileged_conn = *superuser_conn;
 	return;
 }
@@ -2499,6 +2343,9 @@ copy_remote_files(char *host, char *remote_user, char *remote_path,
 }
 
 
+
+
+
 /*
  * Execute a command via ssh on the remote host.
  *
@@ -2564,7 +2411,7 @@ remote_command(const char *host, const char *user, const char *command, PQExpBuf
 	if (outputbuf != NULL)
 	{
 		if (strlen(outputbuf->data))
-			log_verbose(LOG_DEBUG, "remote_command(): output returned was:\n%s", outputbuf->data);
+			log_verbose(LOG_DEBUG, "remote_command(): output returned was:\n  %s", outputbuf->data);
 		else
 			log_verbose(LOG_DEBUG, "remote_command(): no output returned");
 	}
@@ -2813,33 +2660,6 @@ data_dir_required_for_action(t_server_action action)
 }
 
 
-/*
- * Copy the location of the configuration file directory into the
- * provided buffer; if "config_directory" provided, use that, otherwise
- * default to the data directory.
- *
- * This is primarily intended for use with "pg_ctl" (which itself shouldn't
- * be used outside of development environments).
- */
-void
-get_node_config_directory(char *config_dir_buf)
-{
-	if (config_file_options.config_directory[0] != '\0')
-	{
-		strncpy(config_dir_buf, config_file_options.config_directory, MAXPGPATH);
-		return;
-	}
-
-	if (config_file_options.data_directory[0] != '\0')
-	{
-		strncpy(config_dir_buf, config_file_options.data_directory, MAXPGPATH);
-		return;
-	}
-
-	return;
-}
-
-
 void
 get_node_data_directory(char *data_dir_buf)
 {
@@ -2887,7 +2707,7 @@ init_node_record(t_node_info *node_record)
 
 	if (config_file_options.replication_user[0] != '\0')
 	{
-		/* replication user explicitly provided in configuration file */
+		/* replication user explicitly provided */
 		strncpy(node_record->repluser, config_file_options.replication_user, NAMEDATALEN);
 	}
 	else
@@ -2904,120 +2724,3 @@ init_node_record(t_node_info *node_record)
 		create_slot_name(node_record->slot_name, config_file_options.node_id);
 	}
 }
-
-
-bool
-can_use_pg_rewind(PGconn *conn, const char *data_directory, PQExpBufferData *reason)
-{
-	bool		can_use = true;
-	int			server_version_num = get_server_version(conn, NULL);
-
-	/* wal_log_hints not available in 9.3, so just determine if data checksums enabled */
-	if (server_version_num < 90400)
-	{
-		int			data_checksum_version = get_data_checksum_version(data_directory);
-
-		if (data_checksum_version < 0)
-		{
-			appendPQExpBuffer(reason,
-							  _("unable to determine data checksum version"));
-			can_use = false;
-		}
-		else if (data_checksum_version == 0)
-		{
-			appendPQExpBuffer(reason,
-							  _("this cluster was initialised without data checksums"));
-			can_use = false;
-		}
-
-		return can_use;
-	}
-
-	/* "full_page_writes" must be on in any case */
-	if (guc_set(conn, "full_page_writes", "=", "off"))
-	{
-		if (can_use == false)
-			appendPQExpBuffer(reason, "; ");
-
-		appendPQExpBuffer(reason,
-						  _("\"full_page_writes\" must be set to \"on\""));
-
-		can_use = false;
-	}
-
-	/*
-	 * "wal_log_hints" off - are data checksums available? Note: we're
-	 * checking the local pg_control file here as the value will be the same
-	 * throughout the cluster and saves a round-trip to the demotion
-	 * candidate.
-	 */
-	if (guc_set(conn, "wal_log_hints", "=", "on") == false)
-	{
-		int			data_checksum_version = get_data_checksum_version(data_directory);
-
-		if (data_checksum_version < 0)
-		{
-			if (can_use == false)
-				appendPQExpBuffer(reason, "; ");
-
-			appendPQExpBuffer(reason,
-							  _("\"wal_log_hints\" is set to \"off\" but unable to determine data checksum version"));
-			can_use = false;
-		}
-		else if (data_checksum_version == 0)
-		{
-			if (can_use == false)
-				appendPQExpBuffer(reason, "; ");
-
-			appendPQExpBuffer(reason,
-							  _("\"wal_log_hints\" is set to \"off\" and data checksums are disabled"));
-
-			can_use = false;
-		}
-	}
-
-	return can_use;
-}
-
-
-void
-drop_replication_slot_if_exists(PGconn *conn, int node_id, char *slot_name)
-{
-	t_replication_slot slot_info = T_REPLICATION_SLOT_INITIALIZER;
-	RecordStatus record_status = get_slot_record(conn, slot_name, &slot_info);
-
-	log_verbose(LOG_DEBUG, "attempting to delete slot \"%s\" on node %i",
-				slot_name, node_id);
-
-	if (record_status != RECORD_FOUND)
-	{
-		/* this is a good thing */
-		log_verbose(LOG_INFO,
-					_("slot \"%s\" does not exist on node %i, nothing to remove"),
-					slot_name, node_id);
-	}
-	else
-	{
-		if (slot_info.active == false)
-		{
-			if (drop_replication_slot(conn, slot_name) == true)
-			{
-				log_notice(_("replication slot \"%s\" deleted on node %i"), slot_name, node_id);
-			}
-			else
-			{
-				log_error(_("unable to delete replication slot \"%s\" on node %i"), slot_name, node_id);
-			}
-		}
-
-		/*
-		 * if active replication slot exists, call Houston as we have a
-		 * problem
-		 */
-		else
-		{
-			log_warning(_("replication slot \"%s\" is still active on node %i"), slot_name, node_id);
-		}
-	}
-}
-

repmgr-client.h

@@ -85,9 +85,6 @@
 #define OPT_WAIT_START                     1036
 #define OPT_REPL_CONN                      1037
 #define OPT_REMOTE_NODE_ID                 1038
-#define OPT_RECOVERY_CONF_ONLY             1039
-#define OPT_NO_WAIT                        1040
-#define OPT_MISSING_SLOTS                  1041
 
 /* deprecated since 3.3 */
 #define OPT_DATA_DIR						999
@@ -106,8 +103,7 @@ static struct option long_options[] =
 	{"dry-run", no_argument, NULL, OPT_DRY_RUN},
 	{"force", no_argument, NULL, 'F'},
 	{"pg_bindir", required_argument, NULL, 'b'},
-	{"wait", no_argument, NULL, 'w'},
-	{"no-wait", no_argument, NULL, 'W'},
+	{"wait", no_argument, NULL, 'W'},
 
 /* connection options */
 	{"dbname", required_argument, NULL, 'd'},
@@ -126,7 +122,6 @@ static struct option long_options[] =
 /* logging options */
 	{"log-level", required_argument, NULL, 'L'},
 	{"log-to-file", no_argument, NULL, OPT_LOG_TO_FILE},
-	{"quiet",  no_argument, NULL, 'q'},
 	{"terse", no_argument, NULL, 't'},
 	{"verbose", no_argument, NULL, 'v'},
 
@@ -144,7 +139,6 @@ static struct option long_options[] =
 	{"upstream-conninfo", required_argument, NULL, OPT_UPSTREAM_CONNINFO},
 	{"upstream-node-id", required_argument, NULL, OPT_UPSTREAM_NODE_ID},
 	{"without-barman", no_argument, NULL, OPT_WITHOUT_BARMAN},
-	{"recovery-conf-only", no_argument, NULL, OPT_RECOVERY_CONF_ONLY},
 
 /* "standby register" options */
 	{"wait-start", required_argument, NULL, OPT_WAIT_START},
@@ -166,14 +160,13 @@ static struct option long_options[] =
 	{"replication-lag", no_argument, NULL, OPT_REPLICATION_LAG},
 	{"role", no_argument, NULL, OPT_ROLE},
 	{"slots", no_argument, NULL, OPT_SLOTS},
-	{"missing-slots", no_argument, NULL, OPT_MISSING_SLOTS},
 	{"has-passfile", no_argument, NULL, OPT_HAS_PASSFILE},
 	{"replication-connection", no_argument, NULL, OPT_REPL_CONN},
 
 /* "node rejoin" options */
 	{"config-files", required_argument, NULL, OPT_CONFIG_FILES},
     {"config-archive-dir", required_argument, NULL, OPT_CONFIG_ARCHIVE_DIR},
-	{"force-rewind", optional_argument, NULL, OPT_FORCE_REWIND},
+	{"force-rewind", no_argument, NULL, OPT_FORCE_REWIND},
 
 /* "node service" options */
 	{"action", required_argument, NULL, OPT_ACTION},

repmgr.c

@@ -416,9 +416,9 @@ unset_bdr_failover_handler(PG_FUNCTION_ARGS)
 		LWLockAcquire(shared_state->lock, LW_EXCLUSIVE);
 
 		shared_state->bdr_failover_handler = UNKNOWN_NODE_ID;
-	}
 
-	LWLockRelease(shared_state->lock);
+		LWLockRelease(shared_state->lock);
+	}
 
 	PG_RETURN_VOID();
 }

repmgr.conf.sample

@@ -40,28 +40,18 @@
 				 # is not running and there's no other way of determining
 				 # the data directory.
 
+#replication_user='repmgr'	 # User to make replication connections with, if not set defaults
+				 # to the user defined in "conninfo".
 
 # =============================================================================
 
 # Optional configuration items
 # =============================================================================
 
-
-#------------------------------------------------------------------------------
-# Server settings
-#------------------------------------------------------------------------------
-
-#config_directory=''		 # If configuration files are located outside the data
-				 # directory, specify the directory where the main
-				 # postgresql.conf file is located.
-
 #------------------------------------------------------------------------------
 # Replication settings
 #------------------------------------------------------------------------------
 
-#replication_user='repmgr'	 # User to make replication connections with, if not set defaults
-				 # to the user defined in "conninfo".
-
 #replication_type=physical	 # Must be one of 'physical' or 'bdr'.
 
 #location=default		 # arbitrary string defining the location of the node; this
@@ -75,6 +65,9 @@
 				 # at least the number of standbys which will connect
 				 # to the primary.
 
+#recovery_min_apply_delay=	 # If provided, "recovery_min_apply_delay" in recovery.conf
+				 # will be set to this value.
+
 #------------------------------------------------------------------------------
 # Witness server settings
 #------------------------------------------------------------------------------
@@ -98,7 +91,7 @@
 #log_facility=STDERR		 # Logging facility: possible values are STDERR, or for
 				 # syslog integration, one of LOCAL0, LOCAL1, ..., LOCAL7, USER
 
-#log_file=''			 # STDERR can be redirected to an arbitrary file
+#log_file=''			 # stderr can be redirected to an arbitrary file:
 #log_status_interval=300	 # interval (in seconds) for repmgrd to log a status message
 
 
@@ -143,11 +136,6 @@
 					# Debian/Ubuntu users: you will probably need to
 					# set this to the directory where `pg_ctl` is located,
 					# e.g. /usr/lib/postgresql/9.6/bin/
-					#
-					# *NOTE* "pg_bindir" is only used when repmgr directly
-					# executes PostgreSQL binaries; any user-defined scripts
-					# *must* be specified with the full path
-					#
 #use_primary_conninfo_password=false	# explicitly set "password" in recovery.conf's
 					# "primary_conninfo" parameter using the value contained
 					# in the environment variable PGPASSWORD
@@ -161,7 +149,7 @@
 # Examples:
 #
 #   pg_ctl_options='-s'
-#   pg_basebackup_options='--label=repmgr_backup'
+#   pg_basebackup_options='--label=repmgr_backup
 #   rsync_options=--archive --checksum --compress --progress --rsh="ssh -o \"StrictHostKeyChecking no\""
 #   ssh_options=-o "StrictHostKeyChecking no"
 
@@ -173,7 +161,7 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 
 
 #------------------------------------------------------------------------------
-# "standby clone" settings
+# Standby clone settings
 #------------------------------------------------------------------------------
 #
 # These settings apply when cloning a standby ("repmgr standby clone").
@@ -187,65 +175,20 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 					# file system location to another. This
 					# parameter can be provided multiple times.
 
-#restore_command=''			# This will be placed in the recovery.conf file generated
-					# by repmgr.
-
-#archive_cleanup_command=''		# This will be placed in the recovery.conf file generated
-					# by repmgr. Note we recommend using Barman for managing
-					# WAL archives (see: https://www.pgbarman.org )
-
-#recovery_min_apply_delay=		# If provided, "recovery_min_apply_delay" in recovery.conf
-					# will be set to this value (PostgreSQL 9.4 and later).
-
+#restore_command=''			# This will be placed in the recovery.conf
+					# file generated by repmgr
 
 #------------------------------------------------------------------------------
-# "standby promote" settings
-#------------------------------------------------------------------------------
-
-# These settings apply when instructing a standby to promote itself to the
-# new primary ("repmgr standby promote").
-
-#promote_check_timeout=60		# The length of time (in seconds) to wait
-					# for the new primary to finish promoting
-#promote_check_interval=1		# The interval (in seconds) to check whether
-					# the new primary has finished promoting
-
-
-#------------------------------------------------------------------------------
-# "standby follow" settings
+# Standby follow settings
 #------------------------------------------------------------------------------
 
 # These settings apply when instructing a standby to follow the new primary
 # ("repmgr standby follow").
 
-#primary_follow_timeout=60		# The max length of time (in seconds) to wait
+#primary_follow_timeout=60		# The length of time (in seconds) to wait
 					# for the new primary to become available
-#standby_follow_timeout=15		# The max length of time (in seconds) to wait
-					# for the standby to connect to the primary
 
 
-#------------------------------------------------------------------------------
-# "standby switchover" settings
-#------------------------------------------------------------------------------
-
-# These settings apply when switching roles between a primary and a standby
-# ("repmgr standby switchover").
-
-#standby_reconnect_timeout=60		# The max length of time (in seconds) to wait
-					# for the demoted standby to reconnect to the promoted
-					# primary (note: this value should be equal to or greater
-					# than that set for "node_rejoin_timeout")
-
-#------------------------------------------------------------------------------
-# "node rejoin" settings
-#------------------------------------------------------------------------------
-
-# These settings apply when reintegrating a node into a replication cluster
-# with "repmgrd_node_rejoin"
-
-#node_rejoin_timeout=60		# The maximum length of time (in seconds) to wait for
-					# the node to reconnect to the replication cluster
-
 #------------------------------------------------------------------------------
 # Barman options
 #------------------------------------------------------------------------------
@@ -263,11 +206,6 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 # These settings are only applied when repmgrd is running. Values shown
 # are defaults.
 
-#repmgrd_pid_file=			# Path of PID file to use for repmgrd; if not set, a PID file will
-					# be generated in a temporary directory specified by the environment
-					# variable $TMPDIR, or if not set, in "/tmp". This value can be overridden
-					# by the command line option "-p/--pid-file"; the command line option
-					# "--no-pid-file" will force PID file creation to be skipped.
 #failover=manual			# one of 'automatic', 'manual'.
 					# determines what action to take in the event of upstream failure
 					#
@@ -277,19 +215,19 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 					#    manual attention to reattach it to replication
 					# (does not apply to BDR mode)
 
-#priority=100				# indicate a preferred priority for promoting nodes;
+#priority=100				# indicate a preferred priorty for promoting nodes;
 					# a value of zero prevents the node being promoted to primary
 					# (default: 100)
 
-#reconnect_attempts=6			# Number of attempts which will be made to reconnect to an unreachable
+#reconnect_attempts=6			# Number attempts which will be made to reconnect to an unreachable
 					# primary (or other upstream node)
-#reconnect_interval=10			# Interval between attempts to reconnect to an unreachable
+#reconnect_interval=10			# Interval between attempts  to reconnect to an unreachable
 					# primary (or other upstream node)
-#promote_command=			# command repmgrd executes when promoting a new primary; use something like:
+#promote_command=			# command to execute when promoting a new primary; use something like:
 					#
 					#     repmgr standby promote -f /etc/repmgr.conf
 					#
-#follow_command=			# command repmgrd executes when instructing a standby to follow a new primary;
+#follow_command=			# command to execute when instructing a standby to follow a new primary;
 					# use something like:
 					#
 					#     repmgr standby follow -f /etc/repmgr.conf -W --upstream-node-id=%n
@@ -297,9 +235,6 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 #primary_notification_timeout=60	# Interval (in seconds) which repmgrd on a standby
 					# will wait for a notification from the new primary,
 					# before falling back to degraded monitoring
-#repmgrd_standby_startup_timeout=60	# Interval (in seconds) which repmgrd on a standby will wait
-					# for the the local node to restart and become ready to accept connections after
-					# executing "follow_command" (defaults to the value set in "standby_reconnect_timeout")
 
 #monitoring_history=no                  # Whether to write monitoring data to the "montoring_history" table
 #monitor_interval_secs=2                # Interval (in seconds) at which to write monitoring data
@@ -335,19 +270,16 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 #       /usr/bin/systemctl start postgresql-9.6, \
 #       /usr/bin/systemctl restart postgresql-9.6
 #
-# Debian/Ubuntu users: use "sudo pg_ctlcluster" to execute service control commands.
-#
-# For more details, see: https://repmgr.org/docs/4.1/configuration-service-commands.html
 
 #service_start_command = ''
 #service_stop_command = ''
 #service_restart_command = ''
 #service_reload_command = ''
-#service_promote_command = ''		# This parameter is intended for systems which provide a
-					# package-level promote command, such as Debian's
-					# "pg_ctlcluster". *IMPORTANT*: it is *not* a substitute
-					# for "promote_command"; do not use "repmgr standby promote"
-					# (or a script which executes "repmgr standby promote") here.
+#service_promote_command = ''		# Note: this overrides any value contained in the setting
+					# "promote_command". This is intended for systems which
+					# provide a package-level promote command, such as Debian's
+					# "pg_ctlcluster"
+
 
 #------------------------------------------------------------------------------
 # Status check thresholds
@@ -381,7 +313,7 @@ ssh_options='-q -o ConnectTimeout=10'	# Options to append to "ssh"
 #------------------------------------------------------------------------------
 
 #bdr_local_monitoring_only=false         # Only monitor the local node; no checks will be
-					 # performed on the other node
+                                         # performed on the other node
 #bdr_recovery_timeout                    # If a BDR node was offline and has become available
-					 # maximum length of time in seconds to wait for the
-					 # node to reconnect to the cluster
+                                         # maximum length of time in seconds to wait for the
+                                         # node to reconnect to the cluster

repmgr.control

@@ -1,6 +1,6 @@
 # repmgr extension
 comment = 'Replication manager for PostgreSQL'
-default_version = '4.1'
+default_version = '4.0'
 module_pathname = '$libdir/repmgr'
 relocatable = false
 schema = repmgr

repmgr.h

@@ -49,8 +49,6 @@
 #define REPLICATION_TYPE_BDR	  2
 
 #define UNKNOWN_SERVER_VERSION_NUM -1
-#define UNKNOWN_BDR_VERSION_NUM -1
-
 #define UNKNOWN_TIMELINE_ID -1
 #define UNKNOWN_SYSTEM_IDENTIFIER 0
 
@@ -60,8 +58,6 @@
 
 #define VOTING_TERM_NOT_SET -1
 
-#define BDR2_REPLICATION_SET_NAME "repmgr"
-
 /*
  * various default values - ensure repmgr.conf.sample is update
  * if any of these are changed
@@ -74,7 +70,6 @@
 #define DEFAULT_ASYNC_QUERY_TIMEOUT          60  /* seconds */
 #define DEFAULT_PRIMARY_NOTIFICATION_TIMEOUT 60  /* seconds */
 #define DEFAULT_PRIMARY_FOLLOW_TIMEOUT       60  /* seconds */
-#define DEFAULT_STANDBY_FOLLOW_TIMEOUT       30  /* seconds */
 #define DEFAULT_BDR_RECOVERY_TIMEOUT         30  /* seconds */
 #define DEFAULT_ARCHIVE_READY_WARNING        16  /* WAL files */
 #define DEFAULT_ARCHIVE_READY_CRITICAL       128 /* WAL files */
@@ -82,10 +77,6 @@
 #define DEFAULT_REPLICATION_LAG_CRITICAL     600 /* seconds */
 #define DEFAULT_WITNESS_SYNC_INTERVAL        15  /* seconds */
 #define DEFAULT_WAIT_START                   30  /* seconds */
-#define DEFAULT_PROMOTE_CHECK_TIMEOUT        60  /* seconds */
-#define DEFAULT_PROMOTE_CHECK_INTERVAL       1   /* seconds */
-#define DEFAULT_STANDBY_RECONNECT_TIMEOUT    60  /* seconds */
-#define DEFAULT_NODE_REJOIN_TIMEOUT          60  /* seconds */
 
 #ifndef RECOVERY_COMMAND_FILE
 #define RECOVERY_COMMAND_FILE "recovery.conf"

repmgr_version.h.in

@@ -1,2 +1,3 @@
 #define REPMGR_VERSION_DATE ""
-#define REPMGR_VERSION "4.1.2"
+#define REPMGR_VERSION "4.0.3"
+

repmgrd-bdr.c

@@ -35,29 +35,6 @@ do_bdr_node_check(void)
 	/* nothing to do at the moment */
 }
 
-void
-handle_sigint_bdr(SIGNAL_ARGS)
-{
-	PQExpBufferData event_details;
-
-	initPQExpBuffer(&event_details);
-
-	appendPQExpBuffer(&event_details,
-					  "%s signal received",
-					  postgres_signal_arg == SIGTERM
-					  ? "TERM" : "INT");
-
-	create_event_notification(local_conn,
-							  &config_file_options,
-							  config_file_options.node_id,
-							  "repmgrd_shutdown",
-							  true,
-							  event_details.data);
-	termPQExpBuffer(&event_details);
-
-	terminate(SUCCESS);
-}
-
 
 void
 monitor_bdr(void)
@@ -121,6 +98,23 @@ monitor_bdr(void)
 		exit(ERR_BAD_CONFIG);
 	}
 
+	/* Retrieve record for this node from the local database */
+	record_status = get_node_record(local_conn, config_file_options.node_id, &local_node_info);
+
+	/*
+	 * Terminate if we can't find the local node record. This is a
+	 * "fix-the-config" situation, not a lot else we can do.
+	 */
+	if (record_status != RECORD_FOUND)
+	{
+		log_error(_("unable to retrieve record for local node (ID: %i), terminating"),
+				  local_node_info.node_id);
+		log_hint(_("check that \"repmgr bdr register\" was executed for this node"));
+		PQfinish(local_conn);
+		exit(ERR_BAD_CONFIG);
+	}
+
+
 	if (local_node_info.active == false)
 	{
 		log_error(_("local node (ID: %i) is marked as inactive in repmgr"),
@@ -158,16 +152,15 @@ monitor_bdr(void)
 		cell->node_info->node_status = NODE_STATUS_UP;
 	}
 
-	log_info(_("starting continuous BDR node monitoring on node %i"),
-			 config_file_options.node_id);
+	log_debug("main_loop_bdr() monitoring local node %i", config_file_options.node_id);
 
-	INSTR_TIME_SET_CURRENT(log_status_interval_start);
+	log_info(_("starting continuous BDR node monitoring"));
 
 	while (true)
 	{
 
 		/* monitoring loop */
-		log_verbose(LOG_DEBUG, "BDR check loop - checking %i nodes", nodes.node_count);
+		log_verbose(LOG_DEBUG, "BDR check loop...");
 
 		for (cell = nodes.head; cell; cell = cell->next)
 		{
@@ -214,8 +207,7 @@ monitor_bdr(void)
 
 								log_warning(_("unable to connect to node %s (ID %i)"),
 											cell->node_info->node_name, cell->node_info->node_id);
-								//cell->node_info->conn = try_reconnect(cell->node_info);
-								try_reconnect(&cell->node_info->conn, cell->node_info);
+								cell->node_info->conn = try_reconnect(cell->node_info);
 
 								/* node has recovered - log and continue */
 								if (cell->node_info->node_status == NODE_STATUS_UP)
@@ -270,6 +262,7 @@ loop:
 		if (config_file_options.log_status_interval > 0)
 		{
 			int			log_status_interval_elapsed = calculate_elapsed(log_status_interval_start);
+
 			if (log_status_interval_elapsed >= config_file_options.log_status_interval)
 			{
 				log_info(_("monitoring BDR replication status on node \"%s\" (ID: %i)"),
@@ -280,7 +273,8 @@ loop:
 				{
 					if (cell->node_info->monitoring_state == MS_DEGRADED)
 					{
-						log_detail(_("monitoring node \"%s\" (ID: %i) in degraded mode"),
+						log_detail(
+								   _("monitoring node \"%s\" (ID: %i) in degraded mode"),
 								   cell->node_info->node_name,
 								   cell->node_info->node_id);
 					}
@@ -294,7 +288,7 @@ loop:
 			/*
 			 * if we can reload, then could need to change local_conn
 			 */
-			if (reload_config(&config_file_options, BDR))
+			if (reload_config(&config_file_options))
 			{
 				PQfinish(local_conn);
 				local_conn = establish_db_connection(config_file_options.conninfo, true);
@@ -304,12 +298,11 @@ loop:
 			got_SIGHUP = false;
 		}
 
-		/* XXX this looks like it will never be called */
 		if (got_SIGHUP)
 		{
 			log_debug("SIGHUP received");
 
-			if (reload_config(&config_file_options, BDR))
+			if (reload_config(&config_file_options))
 			{
 				PQfinish(local_conn);
 				local_conn = establish_db_connection(config_file_options.conninfo, true);

repmgrd-bdr.h

@@ -22,5 +22,4 @@
 extern void do_bdr_node_check(void);
 extern void monitor_bdr(void);
 
-extern void	handle_sigint_bdr(SIGNAL_ARGS);
 #endif							/* _REPMGRD_BDR_H_ */

repmgrd-physical.h

@@ -24,7 +24,6 @@ void		do_physical_node_check(void);
 void		monitor_streaming_primary(void);
 void		monitor_streaming_standby(void);
 void		monitor_streaming_witness(void);
-
-void		handle_sigint_physical(SIGNAL_ARGS);
+void		close_connections_physical(void);
 
 #endif							/* _REPMGRD_PHYSICAL_H_ */

repmgrd.c

@@ -35,10 +35,8 @@
 
 static char *config_file = NULL;
 static bool verbose = false;
-static char pid_file[MAXPGPATH];
-static bool daemonize = true;
-static bool show_pid_file = false;
-static bool no_pid_file = false;
+static char *pid_file = NULL;
+static bool daemonize = false;
 
 t_configuration_options config_file_options = T_CONFIGURATION_OPTIONS_INITIALIZER;
 
@@ -55,6 +53,9 @@ bool		startup_event_logged = false;
 MonitoringState monitoring_state = MS_NORMAL;
 instr_time	degraded_monitoring_start;
 
+static void close_connections(void);
+void		(*_close_connections) (void) = NULL;
+
 /*
  * Record receipt of SIGHUP; will cause configuration file to be reread
  * at the appropriate point in the main loop.
@@ -72,6 +73,7 @@ static void start_monitoring(void);
 #ifndef WIN32
 static void setup_event_handlers(void);
 static void handle_sighup(SIGNAL_ARGS);
+static void handle_sigint(SIGNAL_ARGS);
 #endif
 
 int			calculate_elapsed(instr_time start_time);
@@ -101,10 +103,8 @@ main(int argc, char **argv)
 		{"config-file", required_argument, NULL, 'f'},
 
 /* daemon options */
-		{"daemonize", optional_argument, NULL, 'd'},
+		{"daemonize", no_argument, NULL, 'd'},
 		{"pid-file", required_argument, NULL, 'p'},
-		{"show-pid-file", no_argument, NULL, 's'},
-		{"no-pid-file", no_argument, NULL, OPT_NO_PID_FILE},
 
 /* logging options */
 		{"log-level", required_argument, NULL, 'L'},
@@ -117,6 +117,8 @@ main(int argc, char **argv)
 
 	set_progname(argv[0]);
 
+	srand(time(NULL));
+
 	/* Disallow running as root */
 	if (geteuid() == 0)
 	{
@@ -130,10 +132,6 @@ main(int argc, char **argv)
 		exit(1);
 	}
 
-	srand(time(NULL));
-
-	memset(pid_file, 0, MAXPGPATH);
-
 	while ((c = getopt_long(argc, argv, "?Vf:L:vdp:m", long_options, &optindex)) != -1)
 	{
 		switch (c)
@@ -175,22 +173,11 @@ main(int argc, char **argv)
 				/* daemon options */
 
 			case 'd':
-				if (optarg != NULL)
-				{
-					daemonize = parse_bool(optarg, "-d/--daemonize", &cli_errors);
-				}
+				daemonize = true;
 				break;
 
 			case 'p':
-				strncpy(pid_file, optarg, MAXPGPATH);
-				break;
-
-			case 's':
-				show_pid_file = true;
-				break;
-
-			case OPT_NO_PID_FILE:
-				no_pid_file = true;
+				pid_file = optarg;
 				break;
 
 				/* logging options */
@@ -237,7 +224,7 @@ main(int argc, char **argv)
 	/* Exit here already if errors in command line options found */
 	if (cli_errors.head != NULL)
 	{
-		exit_with_cli_errors(&cli_errors, NULL);
+		exit_with_cli_errors(&cli_errors);
 	}
 
 	startup_event_logged = false;
@@ -256,58 +243,6 @@ main(int argc, char **argv)
 	 */
 	load_config(config_file, verbose, false, &config_file_options, argv[0]);
 
-	/* Determine pid file location, unless --no-pid-file supplied */
-
-	if (no_pid_file == false)
-	{
-		if (config_file_options.repmgrd_pid_file[0] != '\0')
-		{
-			if (pid_file[0] != '\0')
-			{
-				log_warning(_("\"repmgrd_pid_file\" will be overridden by --pid-file"));
-			}
-			else
-			{
-				strncpy(pid_file, config_file_options.repmgrd_pid_file, MAXPGPATH);
-			}
-		}
-
-		/* no pid file provided - determine location */
-		if (pid_file[0] == '\0')
-		{
-			/* packagers: if feasible, patch PID file path into "package_pid_file" */
-			char		package_pid_file[MAXPGPATH] = "";
-
-			if (package_pid_file[0] != '\0')
-			{
-				maxpath_snprintf(pid_file, "%s", package_pid_file);
-			}
-			else
-			{
-				const char *tmpdir = getenv("TMPDIR");
-
-				if (!tmpdir)
-					tmpdir = "/tmp";
-
-				maxpath_snprintf(pid_file, "%s/repmgrd.pid", tmpdir);
-			}
-		}
-	}
-	else
-	{
-		/* --no-pid-file supplied - overwrite any value provided with --pid-file ... */
-		memset(pid_file, 0, MAXPGPATH);
-	}
-
-
-	/* If --show-pid-file supplied, output the location (if set) and exit */
-
-	if (show_pid_file == true)
-	{
-		printf("%s\n", pid_file);
-		exit(SUCCESS);
-	}
-
 
 	/* Some configuration file items can be overriden by command line options */
 
@@ -347,8 +282,6 @@ main(int argc, char **argv)
 
 	logger_init(&config_file_options, progname());
 
-	log_notice(_("repmgrd (%s %s) starting up"), progname(), REPMGR_VERSION);
-
 	if (verbose)
 		logger_set_verbose();
 
@@ -396,7 +329,7 @@ main(int argc, char **argv)
 		{
 			log_error(_("unable to determine status of \"repmgr\" extension"));
 			log_detail("%s", PQerrorMessage(local_conn));
-			close_connection(&local_conn);
+			PQfinish(local_conn);
 			exit(ERR_DB_QUERY);
 		}
 
@@ -413,33 +346,19 @@ main(int argc, char **argv)
 		}
 
 		log_hint(_("check that this node is part of a repmgr cluster"));
-		close_connection(&local_conn);
+		PQfinish(local_conn);
 		exit(ERR_BAD_CONFIG);
 	}
 
 	/* Retrieve record for this node from the local database */
 	record_status = get_node_record(local_conn, config_file_options.node_id, &local_node_info);
 
-	/*
-	 * Terminate if we can't find the local node record. This is a
-	 * "fix-the-config" situation, not a lot else we can do.
-	 */
-
 	if (record_status != RECORD_FOUND)
 	{
 		log_error(_("no metadata record found for this node - terminating"));
+		log_hint(_("check that 'repmgr (primary|standby) register' was executed for this node"));
 
-		switch (config_file_options.replication_type)
-		{
-			case REPLICATION_TYPE_PHYSICAL:
-				log_hint(_("check that 'repmgr (primary|standby) register' was executed for this node"));
-				break;
-			case REPLICATION_TYPE_BDR:
-				log_hint(_("check that 'repmgr bdr register' was executed for this node"));
-				break;
-		}
-
-		close_connection(&local_conn);
+		PQfinish(local_conn);
 		terminate(ERR_BAD_CONFIG);
 	}
 
@@ -458,7 +377,7 @@ main(int argc, char **argv)
 		{
 			log_error(_("unable to write to shared memory"));
 			log_hint(_("ensure \"shared_preload_libraries\" includes \"repmgr\""));
-			close_connection(&local_conn);
+			PQfinish(local_conn);
 			terminate(ERR_BAD_CONFIG);
 		}
 	}
@@ -470,6 +389,7 @@ main(int argc, char **argv)
 	}
 	else
 	{
+		_close_connections = close_connections_physical;
 		log_debug("node id is %i, upstream node id is %i",
 				  local_node_info.node_id,
 				  local_node_info.upstream_node_id);
@@ -483,7 +403,7 @@ main(int argc, char **argv)
 		daemonize_process();
 	}
 
-	if (pid_file[0] != '\0')
+	if (pid_file != NULL)
 	{
 		check_and_create_pid_file(pid_file);
 	}
@@ -520,7 +440,6 @@ start_monitoring(void)
 				break;
 			case WITNESS:
 				monitor_streaming_witness();
-				break;
 			case BDR:
 				monitor_bdr();
 				return;
@@ -693,6 +612,11 @@ check_and_create_pid_file(const char *pid_file)
 
 
 #ifndef WIN32
+static void
+handle_sigint(SIGNAL_ARGS)
+{
+	terminate(SUCCESS);
+}
 
 /* SIGHUP: set flag to re-read config file at next convenient time */
 static void
@@ -705,23 +629,8 @@ static void
 setup_event_handlers(void)
 {
 	pqsignal(SIGHUP, handle_sighup);
-
-	/*
-	 * we want to be able to write a "repmgrd_shutdown" event, so delegate
-	 * signal handling to the respective replication type handler, as it
-	 * will know best which database connection to use
-	 */
-	switch (config_file_options.replication_type)
-	{
-		case REPLICATION_TYPE_BDR:
-			pqsignal(SIGINT, handle_sigint_bdr);
-			pqsignal(SIGTERM, handle_sigint_bdr);
-			break;
-		case REPLICATION_TYPE_PHYSICAL:
-			pqsignal(SIGINT, handle_sigint_physical);
-			pqsignal(SIGTERM, handle_sigint_physical);
-			break;
-	}
+	pqsignal(SIGINT, handle_sigint);
+	pqsignal(SIGTERM, handle_sigint);
 }
 #endif
 
@@ -738,8 +647,6 @@ show_help(void)
 {
 	printf(_("%s: replication management daemon for PostgreSQL\n"), progname());
 	puts("");
-	printf(_("%s monitors a cluster of servers and optionally performs failover.\n"), progname());
-	puts("");
 
 	printf(_("Usage:\n"));
 	printf(_("  %s [OPTIONS]\n"), progname());
@@ -759,43 +666,30 @@ show_help(void)
 
 	puts("");
 
-	printf(_("Daemon configuration options:\n"));
-	printf(_("  -d, --daemonize[=true/false]\n"));
-	printf(_("                            detach process from foreground (default: true)\n"));
-	printf(_("  -p, --pid-file=PATH       use the specified PID file\n"));
-	printf(_("  -s, --show-pid-file       show PID file which would be used by the current configuration\n"));
-	printf(_("  --no-pid-file             don't write a PID file\n"));
+	printf(_("General configuration options:\n"));
+	printf(_("  -d, --daemonize           detach process from foreground\n"));
+	printf(_("  -p, --pid-file=PATH       write a PID file\n"));
 	puts("");
 
+	printf(_("%s monitors a cluster of servers and optionally performs failover.\n"), progname());
 }
 
 
-void
-try_reconnect(PGconn **conn, t_node_info *node_info)
+PGconn *
+try_reconnect(t_node_info *node_info)
 {
-	PGconn	   *our_conn;
-	t_conninfo_param_list conninfo_params = T_CONNINFO_PARAM_LIST_INITIALIZER;
+	PGconn	   *conn;
 
 	int			i;
 
 	int			max_attempts = config_file_options.reconnect_attempts;
 
-	initialize_conninfo_params(&conninfo_params, false);
-
-	/* we assume by now the conninfo string is parseable */
-	(void) parse_conninfo_string(node_info->conninfo, &conninfo_params, NULL, false);
-
-	/* set some default values if not explicitly provided */
-	param_set_ine(&conninfo_params, "connect_timeout", "2");
-	param_set_ine(&conninfo_params, "fallback_application_name", "repmgr");
-
 	for (i = 0; i < max_attempts; i++)
 	{
 		log_info(_("checking state of node %i, %i of %i attempts"),
 				 node_info->node_id, i + 1, max_attempts);
-		if (is_server_available_params(&conninfo_params) == true)
+		if (is_server_available(node_info->conninfo) == true)
 		{
-
 			log_notice(_("node has recovered, reconnecting"));
 
 			/*
@@ -803,48 +697,15 @@ try_reconnect(PGconn **conn, t_node_info *node_info)
 			 * connection denied due to connection exhaustion - fall back to
 			 * degraded monitoring? - make that configurable
 			 */
-
-			our_conn = establish_db_connection_by_params(&conninfo_params, false);
-
-			if (PQstatus(our_conn) == CONNECTION_OK)
+			conn = establish_db_connection(node_info->conninfo, false);
+			if (PQstatus(conn) == CONNECTION_OK)
 			{
-				free_conninfo_params(&conninfo_params);
-
-				log_info(_("connection to node %i succeeded"), node_info->node_id);
-
-				if (PQstatus(*conn) == CONNECTION_BAD)
-				{
-					log_verbose(LOG_INFO, "original connection handle returned CONNECTION_BAD, using new connection");
-					close_connection(conn);
-					*conn = our_conn;
-				}
-				else
-				{
-					ExecStatusType ping_result;
-
-					ping_result = connection_ping(*conn);
-
-					if (ping_result != PGRES_TUPLES_OK)
-					{
-						log_info("original connnection no longer available, using new connection");
-						close_connection(conn);
-						*conn = our_conn;
-					}
-					else
-					{
-						log_info(_("original connection is still available"));
-
-						PQfinish(our_conn);
-					}
-				}
-
 				node_info->node_status = NODE_STATUS_UP;
-
-				return;
+				return conn;
 			}
 
-			close_connection(&our_conn);
-			log_notice(_("unable to reconnect to node %i"), node_info->node_id);
+			PQfinish(conn);
+			log_notice(_("unable to reconnect to node"));
 		}
 
 		if (i + 1 < max_attempts)
@@ -855,15 +716,14 @@ try_reconnect(PGconn **conn, t_node_info *node_info)
 		}
 	}
 
+
 	log_warning(_("unable to reconnect to node %i after %i attempts"),
 				node_info->node_id,
 				max_attempts);
 
 	node_info->node_status = NODE_STATUS_DOWN;
 
-	free_conninfo_params(&conninfo_params);
-
-	return;
+	return NULL;
 }
 
 
@@ -898,12 +758,27 @@ print_monitoring_state(MonitoringState monitoring_state)
 }
 
 
+static void
+close_connections()
+{
+	if (_close_connections != NULL)
+		_close_connections();
+
+	if (local_conn != NULL && PQstatus(local_conn) == CONNECTION_OK)
+	{
+		PQfinish(local_conn);
+		local_conn = NULL;
+	}
+
+}
+
 void
 terminate(int retval)
 {
+	close_connections();
 	logger_shutdown();
 
-	if (pid_file[0] != '\0')
+	if (pid_file)
 	{
 		unlink(pid_file);
 	}

repmgrd.h

@@ -10,8 +10,6 @@
 #include <time.h>
 #include "portability/instr_time.h"
 
-#define OPT_NO_PID_FILE                  1000
-
 extern volatile sig_atomic_t got_SIGHUP;
 extern MonitoringState monitoring_state;
 extern instr_time degraded_monitoring_start;
@@ -21,13 +19,11 @@ extern t_node_info local_node_info;
 extern PGconn *local_conn;
 extern bool startup_event_logged;
 
-void		try_reconnect(PGconn **conn, t_node_info *node_info);
+PGconn	   *try_reconnect(t_node_info *node_info);
 
 int			calculate_elapsed(instr_time start_time);
 const char *print_monitoring_state(MonitoringState monitoring_state);
 
 void		update_registration(PGconn *conn);
 void		terminate(int retval);
-
-
 #endif							/* _REPMGRD_H_ */