Fix assorted Makefile bugs

1. The target additional-maintainer-clean was misspelled as maintainer-additional-clean. 2. Add add missing clean targets, in particular sysutils.o, config.h, repmgr_version.h, and Makefile.global. While at it, use a wildcard for obj files. 3. Don't delete configure. 4. Remove generated file doc/version.sgml from the repo. 5. Have maintainer-clean recurse to the doc directory.
Bump version
2026-03-22 22:56:29 +00:00 · 2019-03-15 16:30:27 +09:00 · 2019-03-15 14:41:41 +09:00 · 2019-03-15 14:39:55 +09:00 · 2019-03-15 14:08:18 +09:00 · 2019-03-15 14:07:19 +09:00
167 changed files with 12416 additions and 26330 deletions
--- a/.github/workflows/sonarqube-scan.yml
+++ b/.github/workflows/sonarqube-scan.yml
@@ -1,37 +0,0 @@
-name: SonarQube Scan
-on:
-  pull_request:
-  push:
-    branches: [ master ]
-  workflow_dispatch:  
-jobs:
-  sonarQube:
-    name: SonarQube-Job
-    runs-on: ubuntu-latest
-    steps:
-    
-      - name: Checkout source repo
-        uses: actions/checkout@v1
-        with:
-          ref: '${{ github.head_ref }}'
-    
-      - name: Checkout GitHub Action Repo
-        uses: actions/checkout@v3.3.0
-        with:
-          repository: EnterpriseDB/edb-github-actions.git
-          ref: master
-          token: ${{ secrets.GH_SLONIK }}
-          path: .github/actions/edb-github-actions
-          
-      - name: SonarQube Scan
-        uses: ./.github/actions/edb-github-actions/sonarqube
-        with:
-            REPO_NAME: '${{github.event.repository.name}}'
-            SONAR_PROJECT_KEY: EnterpriseDB_repmgr
-            SONAR_URL: '${{secrets.SONARQUBE_URL}}'
-            SONAR_LOGIN: '${{secrets.SONARQUBE_LOGIN}}'
-            PULL_REQUEST_KEY: '${{github.event.number}}'
-            PULL_REQUEST_BRANCH: '${{github.head_ref}}'
-            PULL_REQUEST_BASE_BRANCH: '${{github.base_ref}}'
-            REPO_DEFAULT_BRANCH: '${{github.event.repository.default_branch}}'
-            REPO_EXCLUDE_FILES: '*properties*,**/src/test/**/*,**/*.sql,**/docs/**/*,**/*/*.java'
--- a/.github/workflows/sonarqube/configure-env.sh
+++ b/.github/workflows/sonarqube/configure-env.sh
@@ -1,18 +0,0 @@
-#!/bin/bash
-
-DEBIAN_FRONTEND=noninteractive sudo apt-get -y install debhelper curl autoconf zlib1g-dev \
-  libedit-dev libxml2-dev libxslt1-dev libkrb5-dev libssl-dev libpam0g-dev systemtap-sdt-dev \
-  libselinux1-dev build-essential bison apt-utils lsb-release devscripts \
-  software-properties-common git shellcheck flex
-
-sudo sh -c 'echo "deb http://apt.postgresql.org/pub/repos/apt $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list'
-wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | sudo apt-key add -
-sudo apt-get update
-
-sudo apt-get -y install libpq-dev postgresql-13 postgresql-server-dev-13
-
-./configure
-
-export PG_CONFIG=/usr/bin/pg_config
-
-/home/buildfarm/sonar/depends/build-wrapper-linux-x86/build-wrapper-linux-x86-64 --out-dir build_wrapper_output_directory make 
--- a/.gitignore
+++ b/.gitignore
@@ -42,17 +42,13 @@ lib*.pc
 /regression.diffs
 /regression.out

+/doc/Makefile
+
 # other
 /.lineno
 *.dSYM
-*.orig
-*.rej
-
 # generated binaries
 repmgr
 repmgrd
 repmgr4
 repmgrd4
-
-# generated files
-configfile-scan.c
--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -2,7 +2,7 @@ License and Contributions
 =========================

 `repmgr` is licensed under the GPL v3.  All of its code and documentation is
-Copyright 2010-2021, EnterpriseDB Corporation.  See the files COPYRIGHT and LICENSE for
+Copyright 2010-2019, 2ndQuadrant Limited.  See the files COPYRIGHT and LICENSE for
 details.

 The development of repmgr has primarily been sponsored by 2ndQuadrant customers.
@@ -12,10 +12,10 @@ which has received funding from the European Union's Seventh Framework Programme
 (FP7/2007-2013) under grant agreement 258862.

 Contributions to `repmgr` are welcome, and will be listed in the file `CREDITS`.
-EnterpriseDB Corporation requires that any contributions provide a copyright
+2ndQuadrant Limited requires that any contributions provide a copyright
 assignment and a disclaimer of any work-for-hire ownership claims from the
 employer of the developer.  This lets us make sure that all of the repmgr
-distribution remains free code.  Please contact info@enterprise.com for a
+distribution remains free code.  Please contact info@2ndQuadrant.com for a
 copy of the relevant Copyright Assignment Form.

 Code style
--- a/2
+++ b/2
@@ -1,4 +1,4 @@
-Copyright (c) 2010-2021, EnterpriseDB Corporation
+Copyright (c) 2010-2019, 2ndQuadrant Limited
 All rights reserved.

 This program is free software: you can redistribute it and/or modify
--- a/FAQ.md
+++ b/FAQ.md
@@ -5,6 +5,6 @@ The repmgr 4 FAQ is located here: [repmgr FAQ (Frequently Asked Questions)](http

 The repmgr 3.x FAQ can be found here:

-    https://github.com/EnterpriseDB/repmgr/blob/REL3_3_STABLE/FAQ.md
+    https://github.com/2ndQuadrant/repmgr/blob/REL3_3_STABLE/FAQ.md

 Note that repmgr 3.x is no longer supported.
--- a/139
+++ b/139
@@ -1,136 +1,4 @@
-5.3.3   2022-10-17
-        Support for PostgreSQL added
-        repmgrd: ensure event notification script is called for event
-          "repmgrd_upstream_disconnect"; GitHub #760 (Ian)
-
-5.3.2   2022-05-25
-        standby clone: don't error out if unable to determine cluster size (Ian)
-        node check: fix --downstream --nagios output; GitHub #749 (Ian)
-        repmgrd: ensure witness node marked active (hslightdb)
-        repmgrd: improve walsender disable check (Ian)
-        general: ensure replication slots can be dropped by a
-          replication-only user (Ian)
-
-5.3.1   2022-02-15
-        repmgrd: fixes for potential connection leaks (hslightdb)
-        repmgr: fix upgrade path from repmgr 4.2 and 4.3 to repmgr 5.3 (Ian)
-
-5.3.0   2021-10-12
-        standby switchover: improve handling of node rejoin failure (Ian)
-        repmgrd: prefix all shared library functions with "repmgr_" to
-          minimize the risk of clashes with other shared libraries (Ian)
-        repmgrd: at startup, if node record is marked as "inactive", attempt
-          to set it to "active" (Ian)
-        standby clone: set "slot_name" in node record if required (Ian)
-        node rejoin: emit rejoin target note information as NOTICE (Ian)
-        repmgrd: ensure short option "-s" is accepted (Ian)
-
-5.2.1   2020-12-07
-        config: fix parsing of "replication_type"; GitHub #672 (Ian)
-        standby clone: handle missing "postgresql.auto.conf" (Ian)
-        standby clone: add option --recovery-min-apply-delay (Ian)
-        standby clone: fix data directory permissions handling for
-          PostgreSQL 11 and later (Ian)
-        repmgrd: prevent termination when local node not available and
-          standby_disconnect_on_failover; GitHub #675 (Ian)
-        repmgrd: ensure reconnect_interval" is correctly handled;
-          GitHub #673 (Ian)
-
-5.2.0   2020-10-22
-        general: add support for PostgreSQL 13 (Ian)
-        general: remove support for PostgreSQL 9.3 (Ian)
-        config: add support for file inclusion directives (Ian)
-        repmgr: "primary unregister --force" will unregister an active primary
-          with no registered standby nodes (Ian)
-        repmgr: add option --verify-backup to "standby clone" (Ian)
-        repmgr: "standby clone" honours --waldir option if set in
-          "pg_basebackup_options" (Ian)
-        repmgr: add option --db-connection to "node check" (Ian)
-        repmgr: report database connection error if the --optformat option was
-          provided to "node check" (Ian)
-        repmgr: improve "node rejoin" checks (Ian)
-        repmgr: enable "node rejoin" to join a target with a lower timeline (Ian)
-        repmgr: support pg_rewind's automatic crash recovery in Pg13 and later (Ian)
-        repmgr: improve output formatting for cluster matrix/crosscheck (Ian)
-        repmgr: improve database connection failure error checking on the
-          demotion candidate during "standby switchover" (Ian)
-        repmgr: make repmgr metadata tables dumpable (Ian)
-        repmgr: fix issue with tablespace mapping when cloning from Barman;
-          GitHub #650 (Ian)
-        repmgr: improve handling of pg_control read errors (Ian)
-        repmgrd: add additional optional parameters to "failover_validation command"
-          (spaskalev; GitHub #651)
-        repmgrd: ensure primary connection is reset if same as upstream;
-          GitHub #633 (Ian)
-
-5.1.0   2020-04-13
-        repmgr: remove BDR 2.x support
-        repmgr: don't query upstream's data directory (Ian)
-        repmgr: rename --recovery-conf-only to --replication-conf-only (Ian)
-        repmgr: ensure postgresql.auto.conf is created with correct permissions (Ian)
-        repmgr: minimize requirement to check upstream data directory location
-          during "standby clone" (Ian)
-        repmgr: warn about missing pg_rewind prerequisites when executing
-          "standby clone" (Ian)
-        repmgr: add --upstream option to "node check"
-        repmgr: report error code on follow/rejoin failure due to non-available
-          replication slot (Ian)
-        repmgr: ensure "node rejoin" checks for available replication slots (Ian)
-        repmgr: improve "standby switchover" completion checks (Ian)
-        repmgr: add replication configuration file ownership check to
-          "standby switchover" (Ian)
-        repmgr: check the demotion candidate's registered repmgr.conf file can
-          be found (laixiong; GitHub 615)
-        repmgr: consolidate replication connection code (Ian)
-        repmgr: check permissions for "pg_promote()" and fall back to pg_ctl
-          if necessary (Ian)
-        repmgr: in --dry-run mode, display promote command which will be used (Ian)
-        repmgr: enable "service_promote_command" in PostgreSQL 12 (Ian)
-        repmgr: accept option -S/--superuser for "node check"; GitHub #612 (Ian)
-
-5.0     2019-10-15
-        general: add PostgreSQL 12 support (Ian)
-        general: parse configuration file using flex (Ian)
-        repmgr: rename "repmgr daemon ..." commands to "repmgr service ..." (Ian)
-        repmgr: improve data directory check (Ian)
-        repmgr: improve extension check during "standby clone" (Ian)
-		repmgr: pass provided log level when executing repmgr remotely (Ian)
-        repmgrd: fix handling of upstream node change check (Ian)
-
-4.4     2019-06-27
-        repmgr: improve "daemon status" output (Ian)
-        repmgr: add "--siblings-follow" option to "standby promote" (Ian)
-        repmgr: add "--repmgrd-force-unpause" option to "standby switchover" (Ian)
-        repmgr: fix data directory permissions issue in barman mode where
-          an existing directory is being overwritten (Ian)
-        repmgr: improve "--dry-run" behaviour for "standby promote" and
-          "standby switchover" (Ian)
-        repmgr: when running "standby clone" with the "--upstream-conninfo" option
-          ensure that "application_name" is set correctly in "primary_conninfo" (Ian)
-        repmgr: ensure "--dry-run" together with --force when running "standby clone"
-          in barman mode does not modify an existing data directory (Ian)
-        repmgr: improve "--dry-run" output when running "standby clone" in
-          basebackup mode (Ian)
-        repmgr: improve upstream walsender checks when running "standby clone" (Ian)
-        repmgr: display node timeline ID in "cluster show" output (Ian)
-        repmgr: in "cluster show" and "daemon status", show upstream node name
-          as reported by each individual node (Ian)
-        repmgr: in "cluster show" and "daemon status", check if a node is attached
-          to its advertised upstream node
-        repmgr: use --compact rather than --terse option in "cluster event" (Ian)
-        repmgr: prevent a standby being cloned from a witness server (Ian)
-        repmgr: prevent a witness server being registered on the cluster primary (John)
-        repmgr: ensure BDR2-specific functionality cannot be used on
-          BDR3 and later (Ian)
-        repmgr: canonicalize the data directory path (Ian)
-        repmgr: note that "standby follow" requires a primary to be available (Ian)
-        repmgrd: monitor standbys attached to primary (Ian)
-        repmgrd: add "primary visibility consensus" functionality (Ian)
-        repmgrd: fix memory leak which occurs while the monitored PostgreSQL
-           node is not running (Ian)
-        general: documentation converted to DocBook XML format (Ian)
-
-4.3     2019-04-02
+4.3     2019-??
        repmgr: add "daemon (start|stop)" command; GitHub #528 (Ian)
        repmgr: add --version-number command line option (Ian)
        repmgr: add --compact option to "cluster show"; GitHub #521 (Ian)
@@ -147,8 +15,6 @@
        repmgr: add sanity check for correct extension version (Ian)
        repmgr: ensure "witness register --dry-run" does not attempt to read node
          tables if repmgr extension not installed; GitHub #513 (Ian)
-        repmgr: ensure "standby register" fails when --upstream-node-id is the
-          same as the local node ID (Ian)
        repmgrd: check binary and extension major versions match; GitHub #515 (Ian)
        repmgrd: on a cascaded standby, don't fail over if "failover=manual";
          GitHub #531 (Ian)
@@ -156,9 +22,6 @@
          candidates (Ian)
        repmgrd: add option "connection_check_type" (Ian)
        repmgrd: improve witness monitoring when primary node not available (Ian)
-		repmgrd: handle situation where a primary has unexpectedly appeared
-		  during failover; GitHub #420 (Ian)
-		general: fix Makefile (John)

 4.2     2018-10-24
        repmgr: add parameter "shutdown_check_timeout" for use by "standby switchover";
--- a/Makefile.global.in
+++ b/Makefile.global.in
@@ -2,7 +2,6 @@
 # Makefile.global.in
 # @configure_input@

-
 # Can only be built using pgxs
 USE_PGXS=1

@@ -15,9 +14,6 @@ ifeq ($(vpath_build),yes)
 	VPATH := $(repmgr_abs_srcdir)/$(repmgr_subdir)
 	USE_VPATH :=$(VPATH)
 endif
-
-SED=@SED@
-
 GIT_WORK_TREE=${repmgr_abs_srcdir}
 GIT_DIR=${repmgr_abs_srcdir}/.git
 export GIT_DIR
@@ -28,13 +24,4 @@ include $(PGXS)
 -include ${repmgr_abs_srcdir}/Makefile.custom

 REPMGR_VERSION=$(shell awk '/^\#define REPMGR_VERSION / { print $3; }' ${repmgr_abs_srcdir}/repmgr_version.h.in | cut -d '"' -f 2)
-REPMGR_RELEASE_DATE=$(shell awk '/^\#define REPMGR_RELEASE_DATE / { print $3; }' ${repmgr_abs_srcdir}/repmgr_version.h.in | cut -d '"' -f 2)

-FLEX = flex
-
-##########################################################################
-#
-# Global targets and rules
-
-%.c: %.l
-	$(FLEX) $(FLEXFLAGS) -o'$@' $<
--- a/Makefile.in
+++ b/Makefile.in
@@ -11,28 +11,13 @@ EXTENSION = repmgr

 DATA = \
  repmgr--unpackaged--4.0.sql \
-  repmgr--unpackaged--5.1.sql \
-  repmgr--unpackaged--5.2.sql \
-  repmgr--unpackaged--5.3.sql \
  repmgr--4.0.sql \
  repmgr--4.0--4.1.sql \
  repmgr--4.1.sql \
  repmgr--4.1--4.2.sql \
  repmgr--4.2.sql \
  repmgr--4.2--4.3.sql \
-  repmgr--4.3.sql \
-  repmgr--4.3--4.4.sql \
-  repmgr--4.4.sql \
-  repmgr--4.4--5.0.sql \
-  repmgr--5.0.sql \
-  repmgr--5.0--5.1.sql \
-  repmgr--5.1.sql \
-  repmgr--5.1--5.2.sql \
-  repmgr--5.2.sql \
-  repmgr--5.2--5.3.sql \
-  repmgr--5.3.sql \
-  repmgr--5.3--5.4.sql \
-  repmgr--5.4.sql
+  repmgr--4.3.sql

 REGRESS = repmgr_extension

@@ -64,19 +49,13 @@ $(info Building against PostgreSQL $(MAJORVERSION))

 REPMGR_CLIENT_OBJS = repmgr-client.o \
 	repmgr-action-primary.o repmgr-action-standby.o repmgr-action-witness.o \
-	repmgr-action-cluster.o repmgr-action-node.o repmgr-action-service.o repmgr-action-daemon.o \
-	configdata.o configfile.o configfile-scan.o log.o strutil.o controldata.o dirutil.o compat.o \
-	dbutils.o sysutils.o
-REPMGRD_OBJS = repmgrd.o repmgrd-physical.o configdata.o configfile.o configfile-scan.o log.o \
-	dbutils.o strutil.o controldata.o compat.o sysutils.o
-
+	repmgr-action-bdr.o repmgr-action-cluster.o repmgr-action-node.o repmgr-action-daemon.o \
+	configfile.o log.o strutil.o controldata.o dirutil.o compat.o dbutils.o sysutils.o
+REPMGRD_OBJS = repmgrd.o repmgrd-physical.o repmgrd-bdr.o configfile.o log.o dbutils.o strutil.o controldata.o compat.o sysutils.o
 DATE=$(shell date "+%Y-%m-%d")

 repmgr_version.h: repmgr_version.h.in
-	$(SED) -E 's/REPMGR_VERSION_DATE.*""/REPMGR_VERSION_DATE "$(DATE)"/' $< >$@; \
-	$(SED) -i -E 's/PG_ACTUAL_VERSION_NUM/PG_ACTUAL_VERSION_NUM $(VERSION_NUM)/' $@
-
-configfile-scan.c: configfile-scan.l
+	sed '0,/REPMGR_VERSION_DATE/s,\(REPMGR_VERSION_DATE\).*,\1 "$(DATE)",' $< >$@

 $(REPMGR_CLIENT_OBJS): repmgr-client.h repmgr_version.h

@@ -96,19 +75,10 @@ Makefile: Makefile.in config.status configure
 Makefile.global: Makefile.global.in config.status configure
 	./config.status $@

-doc: repmgr_version.h
-	$(MAKE) -C doc html
+doc:
+	$(MAKE) -C doc all

-doc-repmgr.html: repmgr_version.h
-	$(MAKE) -C doc repmgr.html
-
-doc-repmgr-A4.pdf: repmgr_version.h
-	$(MAKE) -C doc repmgr-A4.pdf
-
-doc-repmgr-US.pdf: repmgr_version.h
-	$(MAKE) -C doc repmgr-US.pdf
-
-install-doc: doc
+install-doc:
 	$(MAKE) -C doc install

 clean: additional-clean
@@ -117,8 +87,6 @@ maintainer-clean: additional-maintainer-clean

 additional-clean:
 	rm -f *.o
-	rm -f repmgr_version.h
-	$(MAKE) -C doc clean

 additional-maintainer-clean: clean
 	$(MAKE) -C doc maintainer-clean
@@ -141,4 +109,3 @@ installdirs-scripts:
 .PHONY: installdirs-scripts
 endif

-.PHONY: doc doc-repmgr.html doc-repmgr-A4.pdf doc-repmgr-US.pdf install-doc
--- a/README.md
+++ b/README.md
@@ -7,23 +7,32 @@ replication capabilities with utilities to set up standby servers, monitor
 replication, and perform administrative tasks such as failover or switchover
 operations.

-The most recent `repmgr` version (5.3.2) supports all PostgreSQL versions from
-9.5 to 14. PostgreSQL 9.4 is also supported, with some restrictions.
+`repmgr 4` is a complete rewrite of the existing `repmgr` codebase, allowing
+the use of all of the latest features in PostgreSQL replication.
+
+PostgreSQL 11, 10, 9.6 and 9.5 are fully supported.
+PostgreSQL 9.4 and 9.3 are supported, with some restrictions.
+
+`repmgr` is distributed under the GNU GPL 3 and maintained by 2ndQuadrant.
+
+### BDR support
+
+`repmgr 4` supports monitoring of a two-node BDR 2.0 cluster on PostgreSQL 9.6
+only. Note that BDR 2.0 is not publicly available; please contact 2ndQuadrant
+for details.

-`repmgr` is distributed under the GNU GPL 3 and maintained by EnterpriseDB.

 Documentation
 -------------

-The full `repmgr` documentation is available here:
+The main `repmgr` documentation is available here:

-> [repmgr documentation](https://repmgr.org/docs/current/index.html)
+> [repmgr 4 documentation](https://repmgr.org/docs/4.2/index.html)

-Versions
--------
+The `README` file for `repmgr` 3.x is available here:
+
+> https://github.com/2ndQuadrant/repmgr/blob/REL3_3_STABLE/README.md

-For an overview of `repmgr` versions and PostgreSQL compatibility, see the
-[repmgr compatibility matrix](https://repmgr.org/docs/current/install-requirements.html#INSTALL-COMPATIBILITY-MATRIX).

 Files
 ------
@@ -47,11 +56,11 @@ Directories
 Support and Assistance
 ----------------------

-EnterpriseDB provides 24x7 production support for `repmgr`, including
+2ndQuadrant provides 24x7 production support for `repmgr`, including
 configuration assistance, installation verification and training for
 running a robust replication cluster. For further details see:

-* [EDB Support Services](https://www.enterprisedb.com/support/postgresql-support-overview-get-the-most-out-of-postgresql)
+* https://2ndquadrant.com/en/support/

 There is a mailing list/forum to discuss contributions or issues:

@@ -61,12 +70,21 @@ The IRC channel #repmgr is registered with freenode.

 Please report bugs and other issues to:

-* https://github.com/EnterpriseDB/repmgr
+* https://github.com/2ndQuadrant/repmgr

-Further information is available at https://repmgr.org/
+Further information is available at https://www.repmgr.org/

 We'd love to hear from you about how you use repmgr. Case studies and
-news are always welcome.
+news are always welcome. Send us an email at info@2ndQuadrant.com, or
+send a postcard to
+
+    repmgr
+    c/o 2ndQuadrant
+    7200 The Quorum
+    Oxford Business Park North
+    Oxford
+    OX4 2JZ
+    United Kingdom

 Thanks from the repmgr core team.

@@ -79,7 +97,7 @@ Thanks from the repmgr core team.
 Further reading
 ---------------

-* [repmgr documentation](https://repmgr.org/docs/current/index.html)
-* [How to Automate PostgreSQL 12 Replication and Failover with repmgr - Part 1](https://www.2ndquadrant.com/en/blog/how-to-automate-postgresql-12-replication-and-failover-with-repmgr-part-1/)
-* [How to Automate PostgreSQL 12 Replication and Failover with repmgr - Part 2](https://www.2ndquadrant.com/en/blog/how-to-automate-postgresql-12-replication-and-failover-with-repmgr-part-2/)
-* [How to implement repmgr for PostgreSQL automatic failover](https://www.enterprisedb.com/postgres-tutorials/how-implement-repmgr-postgresql-automatic-failover)
+* https://blog.2ndquadrant.com/repmgr-3-2-is-here-barman-support-brand-new-high-availability-features/
+* https://blog.2ndquadrant.com/improvements-in-repmgr-3-1-4/
+* https://blog.2ndquadrant.com/managing-useful-clusters-repmgr/
+* https://blog.2ndquadrant.com/easier_postgresql_90_clusters/
--- a/TODO.md
+++ b/TODO.md
@@ -1,7 +1,7 @@
 TODO
 ====

-This file contains a list of improvements which are desirable and/or have
+This file contains a list of improvements which are desireable and/or have
 been requested, and which we aim to address/implement when time and resources
 permit.

@@ -17,4 +17,4 @@ repmgrd nodes to prevent unintended failover; this is obviously inconvenient.
 We'll need to implement some way of notifying each repmgrd to suspend automatic
 failover until further notice.

-Requested in GitHub #410 ( https://github.com/EnterpriseDB/repmgr/issues/410 )
+Requested in GitHub #410 ( https://github.com/2ndQuadrant/repmgr/issues/410 )
--- a/compat.c
+++ b/compat.c
@@ -6,7 +6,7 @@
 *    supported PostgreSQL versions. They're unlikely to change but
 *    it would be worth keeping an eye on them for any fixes/improvements.
 *
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * Portions Copyright (c) 1996-2013, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
--- a/compat.h
+++ b/compat.h
@@ -1,6 +1,6 @@
 /*
 * compat.h
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * Portions Copyright (c) 1996-2013, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
--- a/configdata.c
+++ b/configdata.c
@@ -1,946 +0,0 @@
-/*
- * configdata.c - contains structs with parsed configuration data
- *
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "repmgr.h"
-#include "configfile.h"
-
-/*
- * Parsed configuration settings are stored here
- */
-t_configuration_options config_file_options;
-
-
-/*
- * Configuration settings are defined here
- */
-
-struct ConfigFileSetting config_file_settings[] =
-{
-
-	/* ================
-	 * node information
-	 * ================
-	 */
-	/* node_id */
-	{
-		"node_id",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.node_id },
-		{ .intdefault = UNKNOWN_NODE_ID },
-		{ .intminval = MIN_NODE_ID },
-		{},
-		{}
-	},
-	/* node_name */
-	{
-		"node_name",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.node_name },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.node_name) },
-		{}
-	},
-	/* conninfo */
-	{
-		"conninfo",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.conninfo },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.conninfo) },
-		{}
-	},
-	/* replication_user */
-	{
-		"replication_user",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.replication_user },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.replication_user) },
-		{}
-	},
-	/* data_directory */
-	{
-		"data_directory",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.data_directory },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.data_directory) },
-		{ .postprocess_func = &repmgr_canonicalize_path }
-	},
-	/* config_directory */
-	{
-		"config_directory",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.config_directory },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.config_directory) },
-		{ .postprocess_func = &repmgr_canonicalize_path }
-	},
-	/* pg_bindir */
-	{
-		"pg_bindir",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.pg_bindir },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.pg_bindir) },
-		{ .postprocess_func = &repmgr_canonicalize_path }
-	},
-	/* repmgr_bindir */
-	{
-		"repmgr_bindir",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.repmgr_bindir },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.repmgr_bindir) },
-		{ .postprocess_func = &repmgr_canonicalize_path }
-	},
-	/* replication_type */
-	{
-		"replication_type",
-		CONFIG_REPLICATION_TYPE,
-		{ .replicationtypeptr = &config_file_options.replication_type },
-		{ .replicationtypedefault = DEFAULT_REPLICATION_TYPE },
-		{},
-		{},
-		{}
-	},
-
-	/* ================
-	 * logging settings
-	 * ================
-	 */
-
-	/*
-	 * log_level
-	 * NOTE: the default for "log_level" is set in log.c and does not need
-	 * to be initialised here
-	 */
-	{
-		"log_level",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.log_level },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.log_level) },
-		{}
-	},
-	/* log_facility */
-	{
-		"log_facility",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.log_facility },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.log_facility) },
-		{}
-	},
-	/* log_file */
-	{
-		"log_file",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.log_file },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.log_file) },
-		{ .postprocess_func = &repmgr_canonicalize_path }
-	},
-	/* log_status_interval */
-	{
-		"log_status_interval",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.log_status_interval },
-		{ .intdefault = DEFAULT_LOG_STATUS_INTERVAL, },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* ======================
-	 * standby clone settings
-	 * ======================
-	 */
-	/* use_replication_slots */
-	{
-		"use_replication_slots",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.use_replication_slots },
-		{ .booldefault = DEFAULT_USE_REPLICATION_SLOTS },
-		{},
-		{},
-		{}
-	},
-	/* pg_basebackup_options */
-	{
-		"pg_basebackup_options",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.pg_basebackup_options },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.pg_basebackup_options) },
-		{}
-	},
-	/* restore_command */
-	{
-		"restore_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.restore_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.restore_command) },
-		{}
-	},
-	/* tablespace_mapping */
-	{
-		"tablespace_mapping",
-		CONFIG_TABLESPACE_MAPPING,
-		{ .tablespacemappingptr = &config_file_options.tablespace_mapping },
-		{},
-		{},
-		{},
-		{}
-	},
-	/* recovery_min_apply_delay */
-	{
-		"recovery_min_apply_delay",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.recovery_min_apply_delay },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.recovery_min_apply_delay) },
-        {
-			.process_func = &parse_time_unit_parameter,
-			.providedptr = &config_file_options.recovery_min_apply_delay_provided
-		}
-	},
-
-	/* archive_cleanup_command */
-	{
-		"archive_cleanup_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.archive_cleanup_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.archive_cleanup_command) },
-		{}
-	},
-
-	/* use_primary_conninfo_password */
-	{
-		"use_primary_conninfo_password",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.use_primary_conninfo_password },
-		{ .booldefault = DEFAULT_USE_PRIMARY_CONNINFO_PASSWORD },
-		{},
-		{},
-		{}
-	},
-	/* passfile */
-	{
-		"passfile",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.passfile },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.passfile) },
-		{}
-	},
-
-	/* ======================
-	 * standby clone settings
-	 * ======================
-	 */
-	/* promote_check_timeout */
-	{
-		"promote_check_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.promote_check_timeout },
-		{ .intdefault = DEFAULT_PROMOTE_CHECK_TIMEOUT },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* promote_check_interval */
-	{
-		"promote_check_interval",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.promote_check_interval },
-		{ .intdefault = DEFAULT_PROMOTE_CHECK_INTERVAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-
-	/* =======================
-	 * standby follow settings
-	 * =======================
-	 */
-	/* primary_follow_timeout */
-	{
-		"primary_follow_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.primary_follow_timeout },
-		{ .intdefault = DEFAULT_PRIMARY_FOLLOW_TIMEOUT, },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* standby_follow_timeout */
-	{
-		"standby_follow_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.standby_follow_timeout },
-		{ .intdefault = DEFAULT_STANDBY_FOLLOW_TIMEOUT },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* standby_follow_restart */
-	{
-		"standby_follow_restart",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.standby_follow_restart },
-		{ .booldefault = DEFAULT_STANDBY_FOLLOW_RESTART },
-		{},
-		{},
-		{}
-	},
-
-	/* ===========================
-	 * standby switchover settings
-	 * ===========================
-	 */
-	/* shutdown_check_timeout */
-	{
-		"shutdown_check_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.shutdown_check_timeout },
-		{ .intdefault = DEFAULT_SHUTDOWN_CHECK_TIMEOUT },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* standby_reconnect_timeout */
-	{
-		"standby_reconnect_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.standby_reconnect_timeout },
-		{ .intdefault = DEFAULT_STANDBY_RECONNECT_TIMEOUT },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* wal_receive_check_timeout */
-	{
-		"wal_receive_check_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.wal_receive_check_timeout },
-		{ .intdefault = DEFAULT_WAL_RECEIVE_CHECK_TIMEOUT },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-
-	/* ====================
-	 * node rejoin settings
-	 * ====================
-	 */
-	/* node_rejoin_timeout */
-	{
-		"node_rejoin_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.node_rejoin_timeout },
-		{ .intdefault = DEFAULT_NODE_REJOIN_TIMEOUT },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* ===================
-	 * node check settings
-	 * ===================
-	 */
-	/* archive_ready_warning */
-	{
-		"archive_ready_warning",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.archive_ready_warning },
-		{ .intdefault = DEFAULT_ARCHIVE_READY_WARNING },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* archive_ready_critical */
-	{
-		"archive_ready_critical",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.archive_ready_critical },
-		{ .intdefault = DEFAULT_ARCHIVE_READY_CRITICAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* replication_lag_warning */
-	{
-		"replication_lag_warning",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.replication_lag_warning },
-		{ .intdefault = DEFAULT_REPLICATION_LAG_WARNING },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* replication_lag_critical */
-	{
-		"replication_lag_critical",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.replication_lag_critical },
-		{ .intdefault = DEFAULT_REPLICATION_LAG_CRITICAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-
-	/* ================
-	 * witness settings
-	 * ================
-	 */
-	/* witness_sync_interval */
-	{
-		"witness_sync_interval",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.witness_sync_interval },
-		{ .intdefault = DEFAULT_WITNESS_SYNC_INTERVAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-
-	/* ================
-	 * repmgrd settings
-	 * ================
-	 */
-	/* failover */
-	{
-		"failover",
-		CONFIG_FAILOVER_MODE,
-		{ .failovermodeptr = &config_file_options.failover },
-		{ .failovermodedefault = FAILOVER_MANUAL },
-		{},
-		{},
-		{}
-	},
-	/* location */
-	{
-		"location",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.location },
-		{ .strdefault = DEFAULT_LOCATION },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.location) },
-		{}
-	},
-	/* priority */
-	{
-		"priority",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.priority },
-		{ .intdefault = DEFAULT_PRIORITY, },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* promote_command */
-	{
-		"promote_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.promote_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.promote_command) },
-		{}
-	},
-	/* follow_command */
-	{
-		"follow_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.follow_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.follow_command) },
-		{}
-	},
-	/* monitor_interval_secs */
-	{
-		"monitor_interval_secs",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.monitor_interval_secs },
-		{ .intdefault = DEFAULT_MONITORING_INTERVAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* reconnect_attempts */
-	{
-		"reconnect_attempts",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.reconnect_attempts },
-		{ .intdefault = DEFAULT_RECONNECTION_ATTEMPTS },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* reconnect_interval */
-	{
-		"reconnect_interval",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.reconnect_interval },
-		{ .intdefault = DEFAULT_RECONNECTION_INTERVAL },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-
-	/* monitoring_history */
-	{
-		"monitoring_history",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.monitoring_history },
-		{ .booldefault = DEFAULT_MONITORING_HISTORY },
-		{},
-		{},
-		{}
-	},
-	/* degraded_monitoring_timeout */
-	{
-		"degraded_monitoring_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.degraded_monitoring_timeout },
-		{ .intdefault = DEFAULT_DEGRADED_MONITORING_TIMEOUT },
-		{ .intminval = -1 },
-		{},
-		{}
-	},
-	/* async_query_timeout */
-	{
-		"async_query_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.async_query_timeout },
-		{ .intdefault = DEFAULT_ASYNC_QUERY_TIMEOUT },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* primary_notification_timeout */
-	{
-		"primary_notification_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.primary_notification_timeout },
-		{ .intdefault = DEFAULT_PRIMARY_NOTIFICATION_TIMEOUT },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* repmgrd_standby_startup_timeout */
-	{
-		"repmgrd_standby_startup_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.repmgrd_standby_startup_timeout },
-		{ .intdefault = DEFAULT_REPMGRD_STANDBY_STARTUP_TIMEOUT },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* repmgrd_pid_file */
-	{
-		"repmgrd_pid_file",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.repmgrd_pid_file },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.repmgrd_pid_file) },
-		{ .postprocess_func = &repmgr_canonicalize_path }
-	},
-	/* repmgrd_exit_on_inactive_node */
-	{
-		"repmgrd_exit_on_inactive_node",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.repmgrd_exit_on_inactive_node},
-		{ .booldefault = DEFAULT_REPMGRD_EXIT_ON_INACTIVE_NODE },
-		{},
-		{},
-		{}
-	},
-	/* standby_disconnect_on_failover */
-	{
-		"standby_disconnect_on_failover",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.standby_disconnect_on_failover },
-		{ .booldefault = DEFAULT_STANDBY_DISCONNECT_ON_FAILOVER },
-		{},
-		{},
-		{}
-	},
-	/* sibling_nodes_disconnect_timeout */
-	{
-		"sibling_nodes_disconnect_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.sibling_nodes_disconnect_timeout },
-		{ .intdefault = DEFAULT_SIBLING_NODES_DISCONNECT_TIMEOUT },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* connection_check_type */
-	{
-		"connection_check_type",
-		CONFIG_CONNECTION_CHECK_TYPE,
-		{ .checktypeptr = &config_file_options.connection_check_type },
-		{ .checktypedefault = DEFAULT_CONNECTION_CHECK_TYPE },
-		{},
-		{},
-		{}
-	},
-	/* primary_visibility_consensus */
-	{
-		"primary_visibility_consensus",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.primary_visibility_consensus },
-		{ .booldefault = DEFAULT_PRIMARY_VISIBILITY_CONSENSUS },
-		{},
-		{},
-		{}
-	},
-	/* always_promote */
-	{
-		"always_promote",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.always_promote },
-		{ .booldefault = DEFAULT_ALWAYS_PROMOTE },
-		{},
-		{},
-		{}
-	},
-	/* failover_validation_command */
-	{
-		"failover_validation_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.failover_validation_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.failover_validation_command) },
-		{}
-	},
-	/* election_rerun_interval */
-	{
-		"election_rerun_interval",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.election_rerun_interval },
-		{ .intdefault = DEFAULT_ELECTION_RERUN_INTERVAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* child_nodes_check_interval */
-	{
-		"child_nodes_check_interval",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.child_nodes_check_interval },
-		{ .intdefault = DEFAULT_CHILD_NODES_CHECK_INTERVAL },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* child_nodes_disconnect_min_count */
-	{
-		"child_nodes_disconnect_min_count",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.child_nodes_disconnect_min_count },
-		{ .intdefault = DEFAULT_CHILD_NODES_DISCONNECT_MIN_COUNT },
-		{ .intminval = -1 },
-		{},
-		{}
-	},
-	/* child_nodes_connected_min_count */
-	{
-		"child_nodes_connected_min_count",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.child_nodes_connected_min_count },
-		{ .intdefault = DEFAULT_CHILD_NODES_CONNECTED_MIN_COUNT},
-		{ .intminval = -1 },
-		{},
-		{}
-	},
-	/* child_nodes_connected_include_witness */
-	{
-		"child_nodes_connected_include_witness",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.child_nodes_connected_include_witness },
-		{ .booldefault = DEFAULT_CHILD_NODES_CONNECTED_INCLUDE_WITNESS },
-		{},
-		{},
-		{}
-	},
-	/* child_nodes_disconnect_timeout */
-	{
-		"child_nodes_disconnect_timeout",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.child_nodes_disconnect_timeout },
-		{ .intdefault = DEFAULT_CHILD_NODES_DISCONNECT_TIMEOUT },
-		{ .intminval = 0 },
-		{},
-		{}
-	},
-	/* child_nodes_disconnect_command */
-	{
-		"child_nodes_disconnect_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.child_nodes_disconnect_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.child_nodes_disconnect_command) },
-		{}
-	},
-	/* ================
-	 * service settings
-	 * ================
-	 */
-	/* pg_ctl_options */
-	{
-		"pg_ctl_options",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.pg_ctl_options },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.pg_ctl_options) },
-		{}
-	},
-	/* service_start_command */
-	{
-		"service_start_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.service_start_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.service_start_command) },
-		{}
-	},
-	/* service_stop_command */
-	{
-		"service_stop_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.service_stop_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.service_stop_command) },
-		{}
-	},
-	/* service_restart_command */
-	{
-		"service_restart_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.service_restart_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.service_restart_command) },
-		{}
-	},
-	/* service_reload_command */
-	{
-		"service_reload_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.service_reload_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.service_reload_command) },
-		{}
-	},
-	/* service_promote_command */
-	{
-		"service_promote_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.service_promote_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.service_promote_command) },
-		{}
-	},
-
-	/* ========================
-	 * repmgrd service settings
-	 * ========================
-	 */
-	/* repmgrd_service_start_command */
-	{
-		"repmgrd_service_start_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.repmgrd_service_start_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.repmgrd_service_start_command) },
-		{}
-	},
-	/* repmgrd_service_stop_command */
-	{
-		"repmgrd_service_stop_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.repmgrd_service_stop_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.repmgrd_service_stop_command) },
-		{}
-	},
-	/* ===========================
-	 * event notification settings
-	 * ===========================
-	 */
-	/* event_notification_command */
-	{
-		"event_notification_command",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.event_notification_command },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.event_notification_command) },
-		{}
-	},
-	{
-		"event_notifications",
-		CONFIG_EVENT_NOTIFICATION_LIST,
-		{ .notificationlistptr = &config_file_options.event_notifications },
-		{},
-		{},
-		{},
-		{}
-	},
-	/* ===============
-	 * barman settings
-	 * ===============
-	 */
-	/* barman_host */
-	{
-		"barman_host",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.barman_host },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.barman_host) },
-		{}
-	},
-	/* barman_server */
-	{
-		"barman_server",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.barman_server },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.barman_server) },
-		{}
-	},
-	/* barman_config */
-	{
-		"barman_config",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.barman_config },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.barman_config) },
-		{}
-	},
-	/* ==================
-	 * rsync/ssh settings
-	 * ==================
-	 */
-	/* rsync_options */
-	{
-		"rsync_options",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.rsync_options },
-		{ .strdefault = "" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.rsync_options) },
-		{}
-	},
-	/* ssh_options */
-	{
-		"ssh_options",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.ssh_options },
-		{ .strdefault = DEFAULT_SSH_OPTIONS },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.ssh_options) },
-		{}
-	},
-	/* ==================================
-	 * undocumented experimental settings
-	 * ==================================
-	 */
-	/* reconnect_loop_sync */
-	{
-		"reconnect_loop_sync",
-		CONFIG_BOOL,
-		{ .boolptr = &config_file_options.reconnect_loop_sync },
-		{ .booldefault = false },
-		{},
-		{},
-		{}
-	},
-	/* ==========================
-	 * undocumented test settings
-	 * ==========================
-	 */
-	/* promote_delay */
-	{
-		"promote_delay",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.promote_delay },
-		{ .intdefault = 0 },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	/* failover_delay */
-	{
-		"failover_delay",
-		CONFIG_INT,
-		{ .intptr = &config_file_options.failover_delay },
-		{ .intdefault = 0 },
-		{ .intminval = 1 },
-		{},
-		{}
-	},
-	{
-		"connection_check_query",
-		CONFIG_STRING,
-		{ .strptr = config_file_options.connection_check_query },
-		{ .strdefault = "SELECT 1" },
-		{},
-		{ .strmaxlen = sizeof(config_file_options.connection_check_query) },
-		{}
-	},
-	/* End-of-list marker */
-	{
-		NULL, CONFIG_INT, {}, {}, {}, {}, {}
-	}
-};
-
--- a/configfile-scan.l
+++ b/configfile-scan.l
@@ -1,644 +0,0 @@
-/*
- * Scanner for the configuration file
- */
-
-%{
-
-#include <setjmp.h>
-#include <sys/stat.h>
-#include <dirent.h>
-
-#include "repmgr.h"
-#include "configfile.h"
-
-/*
- * flex emits a yy_fatal_error() function that it calls in response to
- * critical errors like malloc failure, file I/O errors, and detection of
- * internal inconsistency.  That function prints a message and calls exit().
- * Mutate it to instead call our handler, which jumps out of the parser.
- */
-#undef fprintf
-#define fprintf(file, fmt, msg) CONF_flex_fatal(msg)
-
-enum
-{
-	CONF_ID = 1,
-	CONF_STRING = 2,
-	CONF_INTEGER = 3,
-	CONF_REAL = 4,
-	CONF_EQUALS = 5,
-	CONF_UNQUOTED_STRING = 6,
-	CONF_QUALIFIED_ID = 7,
-	CONF_EOL = 99,
-	CONF_ERROR = 100
-};
-
-static unsigned int ConfigFileLineno;
-static const char *CONF_flex_fatal_errmsg;
-static sigjmp_buf *CONF_flex_fatal_jmp;
-
-static char *CONF_scanstr(const char *s);
-static int	CONF_flex_fatal(const char *msg);
-
-static bool ProcessConfigFile(const char *base_dir, const char *config_file, const char *calling_file, bool strict, int depth, KeyValueList *contents, ItemList *error_list, ItemList *warning_list);
-
-static bool ProcessConfigFp(FILE *fp, const char *config_file, const char *calling_file, int depth, const char *base_dir, KeyValueList *contents, ItemList *error_list, ItemList *warning_list);
-
-static bool ProcessConfigDirectory(const char *base_dir, const char *includedir, const char *calling_file, int depth, KeyValueList *contents, ItemList *error_list, ItemList *warning_list);
-
-static char *AbsoluteConfigLocation(const char *base_dir, const char *location, const char *calling_file);
-
-%}
-
-%option 8bit
-%option never-interactive
-%option nodefault
-%option noinput
-%option nounput
-%option noyywrap
-%option warn
-%option prefix="CONF_yy"
-
-
-SIGN			("-"|"+")
-DIGIT			[0-9]
-HEXDIGIT		[0-9a-fA-F]
-
-UNIT_LETTER		[a-zA-Z]
-
-INTEGER			{SIGN}?({DIGIT}+|0x{HEXDIGIT}+){UNIT_LETTER}*
-
-EXPONENT		[Ee]{SIGN}?{DIGIT}+
-REAL			{SIGN}?{DIGIT}*"."{DIGIT}*{EXPONENT}?
-
-LETTER			[A-Za-z_\200-\377]
-LETTER_OR_DIGIT [A-Za-z_0-9\200-\377]
-
-ID				{LETTER}{LETTER_OR_DIGIT}*
-QUALIFIED_ID	{ID}"."{ID}
-
-UNQUOTED_STRING {LETTER}({LETTER_OR_DIGIT}|[-._:/])*
-STRING			\'([^'\\\n]|\\.|\'\')*\'
-
-%%
-
-\n				ConfigFileLineno++; return CONF_EOL;
-[ \t\r]+		/* eat whitespace */
-#.*				/* eat comment (.* matches anything until newline) */
-
-{ID}			return CONF_ID;
-{QUALIFIED_ID}	return CONF_QUALIFIED_ID;
-{STRING}		return CONF_STRING;
-{UNQUOTED_STRING} return CONF_UNQUOTED_STRING;
-{INTEGER}		return CONF_INTEGER;
-{REAL}			return CONF_REAL;
-=				return CONF_EQUALS;
-
-.				return CONF_ERROR;
-
-%%
-
-
-extern bool
-ProcessRepmgrConfigFile(const char *config_file, const char *base_dir, ItemList *error_list, ItemList *warning_list)
-{
-	return ProcessConfigFile(base_dir, config_file, NULL, true, 0, NULL, error_list, warning_list);
-}
-
-
-extern bool
-ProcessPostgresConfigFile(const char *config_file, const char *base_dir, bool strict, KeyValueList *contents, ItemList *error_list, ItemList *warning_list)
-{
-	return ProcessConfigFile(base_dir, config_file, NULL, strict, 0, contents, error_list, warning_list);
-}
-
-static bool
-ProcessConfigFile(const char *base_dir, const char *config_file, const char *calling_file, bool strict, int depth, KeyValueList *contents, ItemList *error_list, ItemList *warning_list)
-{
-	char	   *abs_path;
-	bool		success = true;
-	FILE	   *fp;
-
-	/*
-	 * Reject file name that is all-blank (including empty), as that leads to
-	 * confusion --- we'd try to read the containing directory as a file.
-	 */
-	if (strspn(config_file, " \t\r\n") == strlen(config_file))
-	{
-		return false;
-	}
-
-	/*
-	 * Reject too-deep include nesting depth.  This is just a safety check to
-	 * avoid dumping core due to stack overflow if an include file loops back
-	 * to itself.  The maximum nesting depth is pretty arbitrary.
-	 */
-	if (depth > 10)
-	{
-		item_list_append_format(error_list,
-								_("could not open configuration file \"%s\": maximum nesting depth exceeded"),
-								config_file);
-		return false;
-	}
-
-	abs_path = AbsoluteConfigLocation(base_dir, config_file, calling_file);
-
-	/* Reject direct recursion */
-	if (calling_file && strcmp(abs_path, calling_file) == 0)
-	{
-		item_list_append_format(error_list,
-								_("configuration file recursion in \"%s\""),
-								calling_file);
-		pfree(abs_path);
-		return false;
-	}
-
-	fp = fopen(abs_path, "r");
-	if (!fp)
-	{
-		if (strict == false)
-		{
-			item_list_append_format(error_list,
-									"skipping configuration file \"%s\"",
-									abs_path);
-		}
-		else
-		{
-			item_list_append_format(error_list,
-									"could not open configuration file \"%s\": %s",
-									abs_path,
-									strerror(errno));
-			success = false;
-		}
-	}
-	else
-	{
-		success = ProcessConfigFp(fp, abs_path, calling_file, depth + 1, base_dir, contents, error_list, warning_list);
-	}
-
-	free(abs_path);
-
-	return success;
-}
-
-static bool
-ProcessConfigFp(FILE *fp, const char *config_file, const char *calling_file, int depth, const char *base_dir, KeyValueList *contents, ItemList *error_list, ItemList *warning_list)
-{
-	volatile bool OK = true;
-	volatile YY_BUFFER_STATE lex_buffer = NULL;
-	sigjmp_buf	flex_fatal_jmp;
-	int			errorcount;
-	int			token;
-
-	if (sigsetjmp(flex_fatal_jmp, 1) == 0)
-	{
-		CONF_flex_fatal_jmp = &flex_fatal_jmp;
-	}
-	else
-	{
-		/*
-		 * Regain control after a fatal, internal flex error.  It may have
-		 * corrupted parser state.  Consequently, abandon the file, but trust
-		 * that the state remains sane enough for yy_delete_buffer().
-		 */
-		item_list_append_format(error_list,
-								"%s at file \"%s\" line %u",
-								CONF_flex_fatal_errmsg, config_file, ConfigFileLineno);
-		OK = false;
-		goto cleanup;
-	}
-
-	/*
-	 * Parse
-	 */
-	ConfigFileLineno = 1;
-	errorcount = 0;
-
-	lex_buffer = yy_create_buffer(fp, YY_BUF_SIZE);
-	yy_switch_to_buffer(lex_buffer);
-
-	/* This loop iterates once per logical line */
-	while ((token = yylex()))
-	{
-		char	   *opt_name = NULL;
-		char	   *opt_value = NULL;
-
-		if (token == CONF_EOL)	/* empty or comment line */
-			continue;
-
-		/* first token on line is option name */
-		if (token != CONF_ID && token != CONF_QUALIFIED_ID)
-			goto parse_error;
-		opt_name = pstrdup(yytext);
-
-		/* next we have an optional equal sign; discard if present */
-		token = yylex();
-		if (token == CONF_EQUALS)
-			token = yylex();
-
-		/* now we must have the option value */
-		if (token != CONF_ID &&
-			token != CONF_STRING &&
-			token != CONF_INTEGER &&
-			token != CONF_REAL &&
-			token != CONF_UNQUOTED_STRING)
-			goto parse_error;
-		if (token == CONF_STRING)	/* strip quotes and escapes */
-			opt_value = CONF_scanstr(yytext);
-		else
-			opt_value = pstrdup(yytext);
-
-		/* now we'd like an end of line, or possibly EOF */
-		token = yylex();
-		if (token != CONF_EOL)
-		{
-			if (token != 0)
-				goto parse_error;
-			/* treat EOF like \n for line numbering purposes, cf bug 4752 */
-			ConfigFileLineno++;
-		}
-
-		/* Handle include files */
-		if (base_dir != NULL && strcasecmp(opt_name, "include_dir") == 0)
-		{
-			/*
-			 * An include_dir directive isn't a variable and should be
-			 * processed immediately.
-			 */
-			if (!ProcessConfigDirectory(base_dir, opt_value, config_file,
-										depth + 1, contents,
-									    error_list, warning_list))
-				OK = false;
-			yy_switch_to_buffer(lex_buffer);
-			pfree(opt_name);
-			pfree(opt_value);
-		}
-		else if (base_dir != NULL && strcasecmp(opt_name, "include_if_exists") == 0)
-		{
-			if (!ProcessConfigFile(base_dir, opt_value, config_file,
-								   false, depth + 1, contents,
-								   error_list, warning_list))
-				OK = false;
-
-			yy_switch_to_buffer(lex_buffer);
-			pfree(opt_name);
-			pfree(opt_value);
-		}
-		else if (base_dir != NULL && strcasecmp(opt_name, "include") == 0)
-		{
-			if (!ProcessConfigFile(base_dir, opt_value, config_file,
-								   true, depth + 1, contents,
-								   error_list, warning_list))
-				OK = false;
-
-			yy_switch_to_buffer(lex_buffer);
-			pfree(opt_name);
-			pfree(opt_value);
-		}
-		else
-		{
-			/* OK, process the option name and value */
-			if (contents != NULL)
-			{
-				key_value_list_replace_or_set(contents,
-											  opt_name,
-											  opt_value);
-			}
-			else
-			{
-				parse_configuration_item(error_list,
-										 warning_list,
-										 opt_name,
-										 opt_value);
-			}
-
-		}
-
-
-		/* break out of loop if read EOF, else loop for next line */
-		if (token == 0)
-			break;
-		continue;
-
-parse_error:
-		/* release storage if we allocated any on this line */
-		if (opt_name)
-			pfree(opt_name);
-		if (opt_value)
-			pfree(opt_value);
-
-		/* report the error */
-		if (token == CONF_EOL || token == 0)
-		{
-			item_list_append_format(error_list,
-									_("syntax error in file \"%s\" line %u, near end of line"),
-								    config_file, ConfigFileLineno - 1);
-		}
-		else
-		{
-			item_list_append_format(error_list,
-									_("syntax error in file \"%s\" line %u, near token \"%s\""),
-									config_file, ConfigFileLineno, yytext);
-		}
-		OK = false;
-		errorcount++;
-
-		/*
-		 * To avoid producing too much noise when fed a totally bogus file,
-		 * give up after 100 syntax errors per file (an arbitrary number).
-		 * Also, if we're only logging the errors at DEBUG level anyway, might
-		 * as well give up immediately.  (This prevents postmaster children
-		 * from bloating the logs with duplicate complaints.)
-		 */
-		if (errorcount >= 100)
-		{
-			fprintf(stderr,
- 				   _("too many syntax errors found, abandoning file \"%s\"\n"),
-				   config_file);
-			break;
-		}
-
-		/* resync to next end-of-line or EOF */
-		while (token != CONF_EOL && token != 0)
-			token = yylex();
-		/* break out of loop on EOF */
-		if (token == 0)
-			break;
-	}
-
-cleanup:
-	yy_delete_buffer(lex_buffer);
-
-	return OK;
-}
-
-/*
- * Read and parse all config files in a subdirectory in alphabetical order
- *
- * includedir is the absolute or relative path to the subdirectory to scan.
- *
- * See ProcessConfigFp for further details.
- */
-static bool
-ProcessConfigDirectory(const char *base_dir, const char *includedir, const char *calling_file, int depth, KeyValueList *contents, ItemList *error_list, ItemList *warning_list)
-{
-	char	   *directory;
-	DIR		   *d;
-	struct dirent *de;
-	char	  **filenames;
-	int			num_filenames;
-	int			size_filenames;
-	bool		status;
-
-	/*
-	 * Reject directory name that is all-blank (including empty), as that
-	 * leads to confusion --- we'd read the containing directory, typically
-	 * resulting in recursive inclusion of the same file(s).
-	 */
-	if (strspn(includedir, " \t\r\n") == strlen(includedir))
-	{
-		item_list_append_format(error_list,
-								_("empty configuration directory name: \"%s\""),
-								includedir);
-
-		return false;
-	}
-
-	directory = AbsoluteConfigLocation(base_dir, includedir, calling_file);
-	d = opendir(directory);
-	if (d == NULL)
-	{
-		item_list_append_format(error_list,
-								_("could not open configuration directory \"%s\": %s"),
-								directory,
-								strerror(errno));
-		status = false;
-		goto cleanup;
-	}
-
-	/*
-	 * Read the directory and put the filenames in an array, so we can sort
-	 * them prior to processing the contents.
-	 */
-	size_filenames = 32;
-	filenames = (char **) palloc(size_filenames * sizeof(char *));
-	num_filenames = 0;
-
-	while ((de = readdir(d)) != NULL)
-	{
-		struct stat st;
-		char		filename[MAXPGPATH];
-
-		/*
-		 * Only parse files with names ending in ".conf".  Explicitly reject
-		 * files starting with ".".  This excludes things like "." and "..",
-		 * as well as typical hidden files, backup files, and editor debris.
-		 */
-		if (strlen(de->d_name) < 6)
-			continue;
-		if (de->d_name[0] == '.')
-			continue;
-		if (strcmp(de->d_name + strlen(de->d_name) - 5, ".conf") != 0)
-			continue;
-
-		join_path_components(filename, directory, de->d_name);
-		canonicalize_path(filename);
-		if (stat(filename, &st) == 0)
-		{
-			if (!S_ISDIR(st.st_mode))
-			{
-				/* Add file to array, increasing its size in blocks of 32 */
-				if (num_filenames >= size_filenames)
-				{
-					size_filenames += 32;
-					filenames = (char **) repalloc(filenames,
-											size_filenames * sizeof(char *));
-				}
-				filenames[num_filenames] = pstrdup(filename);
-				num_filenames++;
-			}
-		}
-		else
-		{
-			/*
-			 * stat does not care about permissions, so the most likely reason
-			 * a file can't be accessed now is if it was removed between the
-			 * directory listing and now.
-			 */
-			item_list_append_format(error_list,
-									_("could not stat file \"%s\": %s"),
-									filename, strerror(errno));
-			status = false;
-			goto cleanup;
-		}
-	}
-
-	if (num_filenames > 0)
-	{
-		int			i;
-
-		qsort(filenames, num_filenames, sizeof(char *), pg_qsort_strcmp);
-		for (i = 0; i < num_filenames; i++)
-		{
-			if (!ProcessConfigFile(base_dir, filenames[i], calling_file,
-								   true, depth, contents,
-								   error_list, warning_list))
-			{
-				status = false;
-				goto cleanup;
-			}
-		}
-	}
-	status = true;
-
-
-cleanup:
-	if (d)
-		closedir(d);
-	pfree(directory);
-	return status;
-}
-
-/*
- *		scanstr
- *
- * Strip the quotes surrounding the given string, and collapse any embedded
- * '' sequences and backslash escapes.
- *
- * the string returned is palloc'd and should eventually be pfree'd by the
- * caller.
- */
-static char *
-CONF_scanstr(const char *s)
-{
-	char	   *newStr;
-	int			len,
-				i,
-				j;
-
-	Assert(s != NULL && s[0] == '\'');
-	len = strlen(s);
-	Assert(s != NULL);
-
-	Assert(len >= 2);
-	Assert(s[len - 1] == '\'');
-
-	/* Skip the leading quote; we'll handle the trailing quote below */
-	s++, len--;
-
-	/* Since len still includes trailing quote, this is enough space */
-	newStr = palloc(len);
-
-	for (i = 0, j = 0; i < len; i++)
-	{
-		if (s[i] == '\\')
-		{
-			i++;
-			switch (s[i])
-			{
-				case 'b':
-					newStr[j] = '\b';
-					break;
-				case 'f':
-					newStr[j] = '\f';
-					break;
-				case 'n':
-					newStr[j] = '\n';
-					break;
-				case 'r':
-					newStr[j] = '\r';
-					break;
-				case 't':
-					newStr[j] = '\t';
-					break;
-				case '0':
-				case '1':
-				case '2':
-				case '3':
-				case '4':
-				case '5':
-				case '6':
-				case '7':
-					{
-						int			k;
-						long		octVal = 0;
-
-						for (k = 0;
-							 s[i + k] >= '0' && s[i + k] <= '7' && k < 3;
-							 k++)
-							octVal = (octVal << 3) + (s[i + k] - '0');
-						i += k - 1;
-						newStr[j] = ((char) octVal);
-					}
-					break;
-				default:
-					newStr[j] = s[i];
-					break;
-			}					/* switch */
-		}
-		else if (s[i] == '\'' && s[i + 1] == '\'')
-		{
-			/* doubled quote becomes just one quote */
-			newStr[j] = s[++i];
-		}
-		else
-			newStr[j] = s[i];
-		j++;
-	}
-
-	/* We copied the ending quote to newStr, so replace with \0 */
-	Assert(j > 0 && j <= len);
-	newStr[--j] = '\0';
-
-	return newStr;
-}
-
-/*
- * Given a configuration file or directory location that may be a relative
- * path, return an absolute one.  We consider the location to be relative to
- * the directory holding the calling file, or to DataDir if no calling file.
- */
-static char *
-AbsoluteConfigLocation(const char *base_dir, const char *location, const char *calling_file)
-{
-	char		abs_path[MAXPGPATH];
-
-	if (is_absolute_path(location))
-		return strdup(location);
-
-    if (calling_file != NULL)
-	{
-		strlcpy(abs_path, calling_file, sizeof(abs_path));
-		get_parent_directory(abs_path);
-		join_path_components(abs_path, abs_path, location);
-		canonicalize_path(abs_path);
-	}
-	else if (base_dir != NULL)
-	{
-		join_path_components(abs_path, base_dir, location);
-		canonicalize_path(abs_path);
-	}
-	else
-	{
-		strlcpy(abs_path, location, sizeof(abs_path));
-	}
-
-	return strdup(abs_path);
-}
-
-
-/*
- * Flex fatal errors bring us here.  Stash the error message and jump back to
- * ParseConfigFp().  Assume all msg arguments point to string constants; this
- * holds for flex 2.5.31 (earliest we support) and flex 2.5.35 (latest as of
- * this writing).  Otherwise, we would need to copy the message.
- *
- * We return "int" since this takes the place of calls to fprintf().
-*/
-static int
-CONF_flex_fatal(const char *msg)
-{
-	CONF_flex_fatal_errmsg = msg;
-	siglongjmp(*CONF_flex_fatal_jmp, 1);
-	return 0;					/* keep compiler quiet */
-}
--- a/configfile.c
+++ b/configfile.c
--- a/configfile.h
+++ b/configfile.h
@@ -1,7 +1,7 @@
 /*
 * configfile.h
 *
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 *
 * This program is free software: you can redistribute it and/or modify
@@ -28,12 +28,6 @@
 /* magic number for use in t_recovery_conf */
 #define TARGET_TIMELINE_LATEST 0

-/*
- * This is defined in src/include/utils.h, however it's not practical
- * to include that from a frontend application.
- */
-#define PG_AUTOCONF_FILENAME "postgresql.auto.conf"
-
 extern bool config_file_found;
 extern char config_file_path[MAXPGPATH];

@@ -50,11 +44,6 @@ typedef enum
 	CHECK_CONNECTION
 } ConnectionCheckType;

-typedef enum
-{
-	REPLICATION_TYPE_PHYSICAL
-} ReplicationType;
-
 typedef struct EventNotificationListCell
 {
 	struct EventNotificationListCell *next;
@@ -83,75 +72,23 @@ typedef struct TablespaceList
 } TablespaceList;


-typedef enum
-{
-	CONFIG_BOOL,
-	CONFIG_INT,
-	CONFIG_STRING,
-	CONFIG_FAILOVER_MODE,
-	CONFIG_CONNECTION_CHECK_TYPE,
-	CONFIG_EVENT_NOTIFICATION_LIST,
-	CONFIG_TABLESPACE_MAPPING,
-    CONFIG_REPLICATION_TYPE
-} ConfigItemType;
-
-
-typedef struct ConfigFileSetting
-{
-	const char	   *name;
-	ConfigItemType  type;
-    union
-    {
-        int		   *intptr;
-        char	   *strptr;
-		bool	   *boolptr;
-		failover_mode_opt *failovermodeptr;
-		ConnectionCheckType *checktypeptr;
-		EventNotificationList *notificationlistptr;
-		TablespaceList *tablespacemappingptr;
-		ReplicationType *replicationtypeptr;
-	} val;
-	union {
-		int			intdefault;
-		const char *strdefault;
-		bool		booldefault;
-		failover_mode_opt failovermodedefault;
-		ConnectionCheckType checktypedefault;
-		ReplicationType replicationtypedefault;
-	} defval;
-	union {
-		int				intminval;
-	} minval;
-	union {
-		int				strmaxlen;
-	} maxval;
-	struct {
-		void (*process_func)(const char *, const char *, char *, ItemList *errors);
-		void (*postprocess_func)(const char *, const char *, char *, ItemList *errors);
-		bool	   *providedptr;
-	} process;
-} ConfigFileSetting;
-
-/* Declare the main configfile structure for client applications */
-extern ConfigFileSetting config_file_settings[];
-
 typedef struct
 {
 	/* node information */
 	int			node_id;
-	char		node_name[NAMEDATALEN];
+	char		node_name[MAXLEN];
 	char		conninfo[MAXLEN];
 	char		replication_user[NAMEDATALEN];
 	char		data_directory[MAXPGPATH];
 	char		config_directory[MAXPGPATH];
 	char		pg_bindir[MAXPGPATH];
 	char		repmgr_bindir[MAXPGPATH];
-	ReplicationType	replication_type;
+	int			replication_type;

 	/* log settings */
 	char		log_level[MAXLEN];
 	char		log_facility[MAXLEN];
-	char		log_file[MAXPGPATH];
+	char		log_file[MAXLEN];
 	int			log_status_interval;

 	/* standby clone settings */
@@ -172,7 +109,6 @@ typedef struct
 	/* standby follow settings */
 	int			primary_follow_timeout;
 	int			standby_follow_timeout;
-	bool		standby_follow_restart;

 	/* standby switchover settings */
 	int			shutdown_check_timeout;
@@ -206,20 +142,16 @@ typedef struct
 	int			primary_notification_timeout;
 	int			repmgrd_standby_startup_timeout;
 	char		repmgrd_pid_file[MAXPGPATH];
-	bool		repmgrd_exit_on_inactive_node;
 	bool		standby_disconnect_on_failover;
 	int			sibling_nodes_disconnect_timeout;
 	ConnectionCheckType connection_check_type;
 	bool		primary_visibility_consensus;
-	bool		always_promote;
 	char		failover_validation_command[MAXPGPATH];
 	int			election_rerun_interval;
-	int			child_nodes_check_interval;
-	int			child_nodes_disconnect_min_count;
-	int			child_nodes_connected_min_count;
-	bool		child_nodes_connected_include_witness;
-	int			child_nodes_disconnect_timeout;
-	char		child_nodes_disconnect_command[MAXPGPATH];
+
+	/* BDR settings */
+	bool		bdr_local_monitoring_only;
+	bool		bdr_recovery_timeout;

 	/* service settings */
 	char		pg_ctl_options[MAXLEN];
@@ -247,35 +179,74 @@ typedef struct
 	char		rsync_options[MAXLEN];
 	char		ssh_options[MAXLEN];

-	/*
-	 * undocumented settings
-	 *
-	 * These settings are for testing or experimental features
-	 * and may be changed without notice.
-	 */
-
-	/* experimental settings */
-	bool		reconnect_loop_sync;
-
-	/* test settings */
+	/* undocumented test settings */
 	int			promote_delay;
-	int			failover_delay;
-	char		connection_check_query[MAXLEN];
 } t_configuration_options;

+/*
+ * The following will initialize the structure with a minimal set of options;
+ * actual defaults are set in parse_config() before parsing the configuration file
+ */
+
+#define T_CONFIGURATION_OPTIONS_INITIALIZER { \
+		/* node information */ \
+		UNKNOWN_NODE_ID, "", "", "", "", "", "", "", REPLICATION_TYPE_PHYSICAL,	\
+		/* log settings */ \
+		"", "", "", DEFAULT_LOG_STATUS_INTERVAL, \
+		/* standby clone settings */ \
+		false, "", "", { NULL, NULL }, "", false, "", false, "", \
+		/* standby promote settings */ \
+		DEFAULT_PROMOTE_CHECK_TIMEOUT, DEFAULT_PROMOTE_CHECK_INTERVAL, \
+		/* standby follow settings */ \
+		DEFAULT_PRIMARY_FOLLOW_TIMEOUT,	\
+		DEFAULT_STANDBY_FOLLOW_TIMEOUT,	\
+		/* standby switchover settings */ \
+		DEFAULT_SHUTDOWN_CHECK_TIMEOUT, \
+		DEFAULT_STANDBY_RECONNECT_TIMEOUT, \
+		DEFAULT_WAL_RECEIVE_CHECK_TIMEOUT, \
+		/* node rejoin settings */ \
+		DEFAULT_NODE_REJOIN_TIMEOUT, \
+		/* node check settings */ \
+		DEFAULT_ARCHIVE_READY_WARNING, DEFAULT_ARCHIVE_READY_CRITICAL, \
+		DEFAULT_REPLICATION_LAG_WARNING, DEFAULT_REPLICATION_LAG_CRITICAL, \
+		/* witness settings */ \
+		DEFAULT_WITNESS_SYNC_INTERVAL, \
+		/* repmgrd settings */ \
+		FAILOVER_MANUAL, DEFAULT_LOCATION, DEFAULT_PRIORITY, "", "", \
+		DEFAULT_MONITORING_INTERVAL, \
+		DEFAULT_RECONNECTION_ATTEMPTS, \
+        DEFAULT_RECONNECTION_INTERVAL, \
+        false, -1, \
+		DEFAULT_ASYNC_QUERY_TIMEOUT, \
+		DEFAULT_PRIMARY_NOTIFICATION_TIMEOUT, \
+		-1, "", false, DEFAULT_SIBLING_NODES_DISCONNECT_TIMEOUT, \
+		CHECK_PING, true, "", DEFAULT_ELECTION_RERUN_INTERVAL, \
+		/* BDR settings */ \
+		false, DEFAULT_BDR_RECOVERY_TIMEOUT, \
+		/* service settings */ \
+		"", "", "", "", "", "", \
+		/* repmgrd service settings */ \
+		"", "",  \
+		/* event notification settings */ \
+		"", "", { NULL, NULL }, \
+		/* barman settings */ \
+		"", "", "",	 \
+		/* rsync/ssh settings */ \
+		 "", "", \
+		/* undocumented test settings */ \
+		0 \
+ }
+

-/* Declare the main configfile structure for client applications */
-extern t_configuration_options config_file_options;

 typedef struct
 {
 	char		slot[MAXLEN];
-	char		wal_method[MAXLEN];
-	char		waldir[MAXPGPATH];
+	char		xlog_method[MAXLEN];
 	bool		no_slot;		/* from PostgreSQL 10 */
 } t_basebackup_options;

-#define T_BASEBACKUP_OPTIONS_INITIALIZER { "", "", "", false }
+#define T_BASEBACKUP_OPTIONS_INITIALIZER { "", "", false }


 typedef enum
@@ -332,11 +303,8 @@ typedef struct
 void		set_progname(const char *argv0);
 const char *progname(void);

-void		load_config(const char *config_file, bool verbose, bool terse, char *argv0);
-bool		reload_config(t_server_type server_type);
-void		dump_config(void);
-
-void		parse_configuration_item(ItemList *error_list, ItemList *warning_list, const char *name, const char *value);
+void		load_config(const char *config_file, bool verbose, bool terse, t_configuration_options *options, char *argv0);
+bool		reload_config(t_configuration_options *orig_options, t_server_type server_type);

 bool		parse_recovery_conf(const char *data_dir, t_recovery_conf *conf);

@@ -349,9 +317,6 @@ int repmgr_atoi(const char *s,
 			ItemList *error_list,
 			int minval);

-void parse_time_unit_parameter(const char *name, const char *value, char *dest, ItemList *errors);
-void repmgr_canonicalize_path(const char *name, const char *value, char *config_item, ItemList *errors);
-
 bool parse_pg_basebackup_options(const char *pg_basebackup_options,
 							t_basebackup_options *backup_options,
 							int server_version_num,
@@ -359,21 +324,10 @@ bool parse_pg_basebackup_options(const char *pg_basebackup_options,

 int parse_output_to_argv(const char *string, char ***argv_array);
 void free_parsed_argv(char ***argv_array);
-const char *format_failover_mode(failover_mode_opt failover);
+

 /* called by repmgr-client and repmgrd */
 void		exit_with_cli_errors(ItemList *error_list, const char *repmgr_command);
-
 void		print_item_list(ItemList *item_list);
-const char *print_replication_type(ReplicationType type);
-const char *print_connection_check_type(ConnectionCheckType type);
-char 	   *print_event_notification_list(EventNotificationList *list);
-char 	   *print_tablespace_mapping(TablespaceList *tablespacemappingptr);
-
-extern bool modify_auto_conf(const char *data_dir, KeyValueList *items);
-
-extern bool ProcessRepmgrConfigFile(const char *config_file, const char *base_dir, ItemList *error_list, ItemList *warning_list);
-
-extern bool ProcessPostgresConfigFile(const char *config_file, const char *base_dir, bool strict, KeyValueList *contents, ItemList *error_list, ItemList *warning_list);

 #endif							/* _REPMGR_CONFIGFILE_H_ */
--- a/163
+++ b/163
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for repmgr 5.4.0.
+# Generated by GNU Autoconf 2.69 for repmgr 4.3.
 #
 # Report bugs to <repmgr@googlegroups.com>.
 #
@@ -11,7 +11,7 @@
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 #
-# Copyright (c) 2010-2021, EnterpriseDB Corporation
+# Copyright (c) 2010-2019, 2ndQuadrant Ltd.
 ## -------------------- ##
 ## M4sh Initialization. ##
 ## -------------------- ##
@@ -582,16 +582,13 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='repmgr'
 PACKAGE_TARNAME='repmgr'
-PACKAGE_VERSION='5.4.0'
-PACKAGE_STRING='repmgr 5.4.0'
+PACKAGE_VERSION='4.3'
+PACKAGE_STRING='repmgr 4.3'
 PACKAGE_BUGREPORT='repmgr@googlegroups.com'
 PACKAGE_URL='https://repmgr.org/'

 ac_subst_vars='LTLIBOBJS
 LIBOBJS
-HAVE_SED
-HAVE_GSED
-HAVE_GNUSED
 vpath_build
 SED
 PG_CONFIG
@@ -1181,7 +1178,7 @@ if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
-\`configure' configures repmgr 5.4.0 to adapt to many kinds of systems.
+\`configure' configures repmgr 4.3 to adapt to many kinds of systems.

 Usage: $0 [OPTION]... [VAR=VALUE]...

@@ -1242,7 +1239,7 @@ fi

 if test -n "$ac_init_help"; then
  case $ac_init_help in
-     short | recursive ) echo "Configuration of repmgr 5.4.0:";;
+     short | recursive ) echo "Configuration of repmgr 4.3:";;
   esac
  cat <<\_ACEOF

@@ -1316,14 +1313,14 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
  cat <<\_ACEOF
-repmgr configure 5.4.0
+repmgr configure 4.3
 generated by GNU Autoconf 2.69

 Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.

-Copyright (c) 2010-2021, EnterpriseDB Corporation
+Copyright (c) 2010-2019, 2ndQuadrant Ltd.
 _ACEOF
  exit
 fi
@@ -1335,7 +1332,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.

-It was created by repmgr $as_me 5.4.0, which was
+It was created by repmgr $as_me 4.3, which was
 generated by GNU Autoconf 2.69.  Invocation command line was

  $ $0 $@
@@ -1811,11 +1808,11 @@ fi
 pgac_pg_config_version=$($PG_CONFIG --version 2>/dev/null)

 major_version_num=$(echo "$pgac_pg_config_version"|
-              $SED -e 's/^[^0-9]\+ \([0-9]\{1,2\}\).*$/\1/')
+              $SED -e 's/^PostgreSQL \([0-9]\{1,2\}\).*$/\1/')

 if test "$major_version_num" -lt '10'; then
    version_num=$(echo "$pgac_pg_config_version"|
-                $SED -e 's/^[^0-9]\+ \([0-9]*\)\.\([0-9]*\)\([a-zA-Z0-9.]*\)$/\1.\2/')
+                $SED -e 's/^PostgreSQL \([0-9]*\)\.\([0-9]*\)\([a-zA-Z0-9.]*\)$/\1.\2/')

    if test -z "$version_num"; then
        as_fn_error $? "could not detect the PostgreSQL version, wrong or broken pg_config?" "$LINENO" 5
@@ -1824,12 +1821,12 @@ if test "$major_version_num" -lt '10'; then
    version_num_int=$(echo "$version_num"|
                    $SED -e 's/^\([0-9]*\)\.\([0-9]*\)$/\1\2/')

-    if test "$version_num_int" -lt '94'; then
+    if test "$version_num_int" -lt '93'; then
        as_fn_error $? "repmgr is not compatible with detected PostgreSQL version: $version_num" "$LINENO" 5
    fi
 else
    version_num=$(echo "$pgac_pg_config_version"|
-                $SED -e 's/^[^0-9]\+ \(.\+\)$/\1/')
+                $SED -e 's/^PostgreSQL \(.\+\)$/\1/')

    if test -z "$version_num"; then
        as_fn_error $? "could not detect the PostgreSQL version, wrong or broken pg_config?" "$LINENO" 5
@@ -1850,137 +1847,12 @@ else
 fi


-# Extract the first word of "gnused", so it can be a program name with args.
-set dummy gnused; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_HAVE_GNUSED+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$HAVE_GNUSED"; then
-  ac_cv_prog_HAVE_GNUSED="$HAVE_GNUSED" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_HAVE_GNUSED="yes"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_HAVE_GNUSED" && ac_cv_prog_HAVE_GNUSED="no"
-fi
-fi
-HAVE_GNUSED=$ac_cv_prog_HAVE_GNUSED
-if test -n "$HAVE_GNUSED"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_GNUSED" >&5
-$as_echo "$HAVE_GNUSED" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "gsed", so it can be a program name with args.
-set dummy gsed; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_HAVE_GSED+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$HAVE_GSED"; then
-  ac_cv_prog_HAVE_GSED="$HAVE_GSED" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_HAVE_GSED="yes"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_HAVE_GSED" && ac_cv_prog_HAVE_GSED="no"
-fi
-fi
-HAVE_GSED=$ac_cv_prog_HAVE_GSED
-if test -n "$HAVE_GSED"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_GSED" >&5
-$as_echo "$HAVE_GSED" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "sed", so it can be a program name with args.
-set dummy sed; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_HAVE_SED+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$HAVE_SED"; then
-  ac_cv_prog_HAVE_SED="$HAVE_SED" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_HAVE_SED="yes"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_HAVE_SED" && ac_cv_prog_HAVE_SED="no"
-fi
-fi
-HAVE_SED=$ac_cv_prog_HAVE_SED
-if test -n "$HAVE_SED"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_SED" >&5
-$as_echo "$HAVE_SED" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-if test "$HAVE_GNUSED" = yes; then
- SED=gnused
-else
- if test "$HAVE_GSED" = yes; then
-  SED=gsed
- else
-  SED=sed
- fi
-fi
-
-
-
 ac_config_files="$ac_config_files Makefile"

 ac_config_files="$ac_config_files Makefile.global"

+ac_config_files="$ac_config_files doc/Makefile"
+
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -2487,7 +2359,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by repmgr $as_me 5.4.0, which was
+This file was extended by repmgr $as_me 4.3, which was
 generated by GNU Autoconf 2.69.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
@@ -2550,7 +2422,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-repmgr config.status 5.4.0
+repmgr config.status 4.3
 configured by $0, generated by GNU Autoconf 2.69,
  with options \\"\$ac_cs_config\\"

@@ -2674,6 +2546,7 @@ do
    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
    "Makefile.global") CONFIG_FILES="$CONFIG_FILES Makefile.global" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;

  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
  esac
--- a/configure.in
+++ b/configure.in
@@ -1,6 +1,6 @@
-AC_INIT([repmgr], [5.4.0], [repmgr@googlegroups.com], [repmgr], [https://repmgr.org/])
+AC_INIT([repmgr], [4.3], [repmgr@googlegroups.com], [repmgr], [https://repmgr.org/])

-AC_COPYRIGHT([Copyright (c) 2010-2021, EnterpriseDB Corporation])
+AC_COPYRIGHT([Copyright (c) 2010-2019, 2ndQuadrant Ltd.])

 AC_CONFIG_HEADER(config.h)

@@ -19,11 +19,11 @@ fi
 pgac_pg_config_version=$($PG_CONFIG --version 2>/dev/null)

 major_version_num=$(echo "$pgac_pg_config_version"|
-              $SED -e 's/^[[^0-9]]\+ \([[0-9]]\{1,2\}\).*$/\1/')
+              $SED -e 's/^PostgreSQL \([[0-9]]\{1,2\}\).*$/\1/')

 if test "$major_version_num" -lt '10'; then
    version_num=$(echo "$pgac_pg_config_version"|
-                $SED -e 's/^[[^0-9]]\+ \([[0-9]]*\)\.\([[0-9]]*\)\([[a-zA-Z0-9.]]*\)$/\1.\2/')
+                $SED -e 's/^PostgreSQL \([[0-9]]*\)\.\([[0-9]]*\)\([[a-zA-Z0-9.]]*\)$/\1.\2/')

    if test -z "$version_num"; then
        AC_MSG_ERROR([could not detect the PostgreSQL version, wrong or broken pg_config?])
@@ -32,12 +32,12 @@ if test "$major_version_num" -lt '10'; then
    version_num_int=$(echo "$version_num"|
                    $SED -e 's/^\([[0-9]]*\)\.\([[0-9]]*\)$/\1\2/')

-    if test "$version_num_int" -lt '94'; then
+    if test "$version_num_int" -lt '93'; then
        AC_MSG_ERROR([repmgr is not compatible with detected PostgreSQL version: $version_num])
    fi
 else
    version_num=$(echo "$pgac_pg_config_version"|
-                $SED -e 's/^[[^0-9]]\+ \(.\+\)$/\1/')
+                $SED -e 's/^PostgreSQL \(.\+\)$/\1/')

    if test -z "$version_num"; then
        AC_MSG_ERROR([could not detect the PostgreSQL version, wrong or broken pg_config?])
@@ -57,23 +57,8 @@ else
 fi
 AC_SUBST(vpath_build)

-AC_CHECK_PROG(HAVE_GNUSED,gnused,yes,no)
-AC_CHECK_PROG(HAVE_GSED,gsed,yes,no)
-AC_CHECK_PROG(HAVE_SED,sed,yes,no)
-
-if test "$HAVE_GNUSED" = yes; then
- SED=gnused
-else
- if test "$HAVE_GSED" = yes; then
-  SED=gsed
- else
-  SED=sed
- fi
-fi
-AC_SUBST(SED)
-
-
 AC_CONFIG_FILES([Makefile])
 AC_CONFIG_FILES([Makefile.global])
+AC_CONFIG_FILES([doc/Makefile])
 AC_OUTPUT

--- a/contrib/convert-config.pl
+++ b/contrib/convert-config.pl
@@ -73,16 +73,7 @@ while(<$fh>) {
        if ($param eq 'data_directory') {
            $data_directory_found = 1;
        }
-
-        # Don't quote numbers
-        if ($value =~ /^\d+$/) {
-            push @outp, sprintf(q|%s=%s|, $param, $value);
-        }
-        # Quote everything else
-        else {
-            $value =~ s/'/''/g;
-            push @outp, sprintf(q|%s='%s'|, $param, $value);
-        }
+        push @outp, $line;
    }
 }

@@ -92,6 +83,6 @@ print join("\n", @outp);
 print "\n";

 if ($data_directory_found == 0) {
-    print "data_directory=''\n";
+    print "data_directory=\n";
 }

--- a/controldata.c
+++ b/controldata.c
@@ -2,11 +2,11 @@
 * controldata.c - functions for reading the pg_control file
 *
 * The functions provided here enable repmgr to read a pg_control file
- * in a version-independent way, even if the PostgreSQL instance is not
+ * in a version-indepent way, even if the PostgreSQL instance is not
 * running. For that reason we can't use on the pg_control_*() functions
 * provided in PostgreSQL 9.6 and later.
 *
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
@@ -90,9 +90,7 @@ get_system_identifier(const char *data_directory)
 	uint64		system_identifier = UNKNOWN_SYSTEM_IDENTIFIER;

 	control_file_info = get_controlfile(data_directory);
-
-	if (control_file_info->control_file_processed == true)
-		system_identifier = control_file_info->system_identifier;
+	system_identifier = control_file_info->system_identifier;

 	pfree(control_file_info);

@@ -100,21 +98,19 @@ get_system_identifier(const char *data_directory)
 }


-bool
-get_db_state(const char *data_directory, DBState *state)
+DBState
+get_db_state(const char *data_directory)
 {
 	ControlFileInfo *control_file_info = NULL;
-	bool control_file_processed;
+	DBState		state;

 	control_file_info = get_controlfile(data_directory);
-	control_file_processed = control_file_info->control_file_processed;

-	if (control_file_processed == true)
-		*state = control_file_info->state;
+	state = control_file_info->state;

 	pfree(control_file_info);

-	return control_file_processed;
+	return state;
 }


@@ -126,8 +122,7 @@ get_latest_checkpoint_location(const char *data_directory)

 	control_file_info = get_controlfile(data_directory);

-	if (control_file_info->control_file_processed == true)
-		checkPoint = control_file_info->checkPoint;
+	checkPoint = control_file_info->checkPoint;

 	pfree(control_file_info);

@@ -139,12 +134,11 @@ int
 get_data_checksum_version(const char *data_directory)
 {
 	ControlFileInfo *control_file_info = NULL;
-	int			data_checksum_version = UNKNOWN_DATA_CHECKSUM_VERSION;
+	int			data_checksum_version = -1;

 	control_file_info = get_controlfile(data_directory);

-	if (control_file_info->control_file_processed == true)
-		data_checksum_version = (int) control_file_info->data_checksum_version;
+	data_checksum_version = (int) control_file_info->data_checksum_version;

 	pfree(control_file_info);

@@ -283,19 +277,8 @@ get_controlfile(const char *DataDir)
 		return control_file_info;
 	}

-	if (version_num >= 120000)
-	{
-#if PG_ACTUAL_VERSION_NUM >= 120000
-		expected_size = sizeof(ControlFileData12);
-		ControlFileDataPtr = palloc0(expected_size);
-#endif
-	}
-	else if (version_num >= 110000)
-	{
-		expected_size = sizeof(ControlFileData11);
-		ControlFileDataPtr = palloc0(expected_size);
-	}
-	else if (version_num >= 90500)
+
+	if (version_num >= 90500)
 	{
 		expected_size = sizeof(ControlFileData95);
 		ControlFileDataPtr = palloc0(expected_size);
@@ -305,6 +288,12 @@ get_controlfile(const char *DataDir)
 		expected_size = sizeof(ControlFileData94);
 		ControlFileDataPtr = palloc0(expected_size);
 	}
+	else if (version_num >= 90300)
+	{
+		expected_size = sizeof(ControlFileData93);
+		ControlFileDataPtr = palloc0(expected_size);
+	}
+

 	if (read(fd, ControlFileDataPtr, expected_size) != expected_size)
 	{
@@ -312,8 +301,6 @@ get_controlfile(const char *DataDir)
 					ControlFilePath);
 		log_detail("%s", strerror(errno));

-		close(fd);
-
 		return control_file_info;
 	}

@@ -321,23 +308,7 @@ get_controlfile(const char *DataDir)

 	control_file_info->control_file_processed = true;

-	if (version_num >= 120000)
-	{
-#if PG_ACTUAL_VERSION_NUM >= 120000
-		ControlFileData12 *ptr = (struct ControlFileData12 *)ControlFileDataPtr;
-		control_file_info->system_identifier = ptr->system_identifier;
-		control_file_info->state = ptr->state;
-		control_file_info->checkPoint = ptr->checkPoint;
-		control_file_info->data_checksum_version = ptr->data_checksum_version;
-		control_file_info->timeline = ptr->checkPointCopy.ThisTimeLineID;
-		control_file_info->minRecoveryPointTLI = ptr->minRecoveryPointTLI;
-		control_file_info->minRecoveryPoint = ptr->minRecoveryPoint;
-#else
-		fprintf(stderr, "ERROR: please use a repmgr version built for PostgreSQL 12 or later\n");
-		exit(ERR_BAD_CONFIG);
-#endif
-	}
-	else if (version_num >= 110000)
+	if (version_num >= 110000)
 	{
 		ControlFileData11 *ptr = (struct ControlFileData11 *)ControlFileDataPtr;
 		control_file_info->system_identifier = ptr->system_identifier;
@@ -370,6 +341,17 @@ get_controlfile(const char *DataDir)
 		control_file_info->minRecoveryPointTLI = ptr->minRecoveryPointTLI;
 		control_file_info->minRecoveryPoint = ptr->minRecoveryPoint;
 	}
+	else if (version_num >= 90300)
+	{
+		ControlFileData93 *ptr = (struct ControlFileData93 *)ControlFileDataPtr;
+		control_file_info->system_identifier = ptr->system_identifier;
+		control_file_info->state = ptr->state;
+		control_file_info->checkPoint = ptr->checkPoint;
+		control_file_info->data_checksum_version = ptr->data_checksum_version;
+		control_file_info->timeline = ptr->checkPointCopy.ThisTimeLineID;
+		control_file_info->minRecoveryPointTLI = ptr->minRecoveryPointTLI;
+		control_file_info->minRecoveryPoint = ptr->minRecoveryPoint;
+	}

 	pfree(ControlFileDataPtr);

--- a/controldata.h
+++ b/controldata.h
@@ -1,6 +1,6 @@
 /*
 * controldata.h
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
@@ -12,7 +12,6 @@
 #include "postgres_fe.h"
 #include "catalog/pg_control.h"

-
 #define MAX_VERSION_STRING 24
 /*
 * A simplified representation of pg_control containing only those fields
@@ -31,7 +30,9 @@ typedef struct
 } ControlFileInfo;


-typedef struct CheckPoint94
+
+/* Same for 9.3, 9.4 */
+typedef struct CheckPoint93
 {
 	XLogRecPtr	redo;			/* next RecPtr available when we began to
 								 * create CheckPoint (i.e. REDO start point) */
@@ -51,10 +52,10 @@ typedef struct CheckPoint94
 	pg_time_t	time;			/* time stamp of checkpoint */

 	TransactionId oldestActiveXid;
-} CheckPoint94;
+} CheckPoint93;


-/* Same for 9.5, 9.6, 10, 11 */
+/* Same for 9.5, 9.6, 10, HEAD */
 typedef struct CheckPoint95
 {
 	XLogRecPtr	redo;			/* next RecPtr available when we began to
@@ -82,50 +83,65 @@ typedef struct CheckPoint95
 } CheckPoint95;


-#if PG_ACTUAL_VERSION_NUM >= 120000
-/*
- * Following fields removed in PostgreSQL 12;
- *
- *   uint32 nextXidEpoch;
- *   TransactionId nextXid;
- *
- * and replaced by:
- *
- *   FullTransactionId nextFullXid;
- */
-
-typedef struct CheckPoint12
+typedef struct ControlFileData93
 {
-	XLogRecPtr	redo;			/* next RecPtr available when we began to
-								 * create CheckPoint (i.e. REDO start point) */
-	TimeLineID	ThisTimeLineID; /* current TLI */
-	TimeLineID	PrevTimeLineID; /* previous TLI, if this record begins a new
-								 * timeline (equals ThisTimeLineID otherwise) */
-	bool		fullPageWrites; /* current full_page_writes */
-	FullTransactionId nextFullXid;	/* next free full transaction ID */
-	Oid			nextOid;		/* next free OID */
-	MultiXactId nextMulti;		/* next free MultiXactId */
-	MultiXactOffset nextMultiOffset;	/* next free MultiXact offset */
-	TransactionId oldestXid;	/* cluster-wide minimum datfrozenxid */
-	Oid			oldestXidDB;	/* database with minimum datfrozenxid */
-	MultiXactId oldestMulti;	/* cluster-wide minimum datminmxid */
-	Oid			oldestMultiDB;	/* database with minimum datminmxid */
-	pg_time_t	time;			/* time stamp of checkpoint */
-	TransactionId oldestCommitTsXid;	/* oldest Xid with valid commit
-										 * timestamp */
-	TransactionId newestCommitTsXid;	/* newest Xid with valid commit
-										 * timestamp */
+	uint64		system_identifier;

-	/*
-	 * Oldest XID still running. This is only needed to initialize hot standby
-	 * mode from an online checkpoint, so we only bother calculating this for
-	 * online checkpoints and only when wal_level is replica. Otherwise it's
-	 * set to InvalidTransactionId.
-	 */
-	TransactionId oldestActiveXid;
-} CheckPoint12;
-#endif
+	uint32		pg_control_version;		/* PG_CONTROL_VERSION */
+	uint32		catalog_version_no;		/* see catversion.h */

+	DBState		state;			/* see enum above */
+	pg_time_t	time;			/* time stamp of last pg_control update */
+	XLogRecPtr	checkPoint;		/* last check point record ptr */
+	XLogRecPtr	prevCheckPoint; /* previous check point record ptr */
+
+	CheckPoint93	checkPointCopy; /* copy of last check point record */
+
+	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */
+
+	XLogRecPtr	minRecoveryPoint;
+	TimeLineID	minRecoveryPointTLI;
+	XLogRecPtr	backupStartPoint;
+	XLogRecPtr	backupEndPoint;
+	bool		backupEndRequired;
+
+	int			wal_level;
+	int			MaxConnections;
+	int			max_prepared_xacts;
+	int			max_locks_per_xact;
+
+	uint32		maxAlign;		/* alignment requirement for tuples */
+	double		floatFormat;	/* constant 1234567.0 */
+
+	uint32		blcksz;			/* data block size for this DB */
+	uint32		relseg_size;	/* blocks per segment of large relation */
+
+	uint32		xlog_blcksz;	/* block size within WAL files */
+	uint32		xlog_seg_size;	/* size of each WAL segment */
+
+	uint32		nameDataLen;	/* catalog name field width */
+	uint32		indexMaxKeys;	/* max number of columns in an index */
+
+	uint32		toast_max_chunk_size;	/* chunk size in TOAST tables */
+
+	/* flag indicating internal format of timestamp, interval, time */
+	bool		enableIntTimes; /* int64 storage enabled? */
+
+	/* flags indicating pass-by-value status of various types */
+	bool		float4ByVal;	/* float4 pass-by-value? */
+	bool		float8ByVal;	/* float8, int8, etc pass-by-value? */
+
+	/* Are data pages protected by checksums? Zero if no checksum version */
+	uint32		data_checksum_version;
+
+} ControlFileData93;
+
+
+/*
+ * Following field added since 9.3:
+ *
+ * 	int			max_worker_processes;
+ */

 typedef struct ControlFileData94
 {
@@ -139,7 +155,7 @@ typedef struct ControlFileData94
 	XLogRecPtr	checkPoint;		/* last check point record ptr */
 	XLogRecPtr	prevCheckPoint; /* previous check point record ptr */

-	CheckPoint94	checkPointCopy; /* copy of last check point record */
+	CheckPoint93	checkPointCopy; /* copy of last check point record */

 	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */

@@ -317,67 +333,8 @@ typedef struct ControlFileData11
 } ControlFileData11;


-#if PG_ACTUAL_VERSION_NUM >= 120000
-/*
- * Following field added in Pg12:
- *
- *   int max_wal_senders;
- */
-
-typedef struct ControlFileData12
-{
-	uint64		system_identifier;
-
-	uint32		pg_control_version; /* PG_CONTROL_VERSION */
-	uint32		catalog_version_no; /* see catversion.h */
-
-	DBState		state;			/* see enum above */
-	pg_time_t	time;			/* time stamp of last pg_control update */
-	XLogRecPtr	checkPoint;		/* last check point record ptr */
-
-	CheckPoint12	checkPointCopy; /* copy of last check point record */
-
-	XLogRecPtr	unloggedLSN;	/* current fake LSN value, for unlogged rels */
-
-	XLogRecPtr	minRecoveryPoint;
-	TimeLineID	minRecoveryPointTLI;
-	XLogRecPtr	backupStartPoint;
-	XLogRecPtr	backupEndPoint;
-	bool		backupEndRequired;
-
-	int			wal_level;
-	bool		wal_log_hints;
-	int			MaxConnections;
-	int			max_worker_processes;
-	int			max_wal_senders;
-	int			max_prepared_xacts;
-	int			max_locks_per_xact;
-	bool		track_commit_timestamp;
-
-	uint32		maxAlign;		/* alignment requirement for tuples */
-	double		floatFormat;	/* constant 1234567.0 */
-
-	uint32		blcksz;			/* data block size for this DB */
-	uint32		relseg_size;	/* blocks per segment of large relation */
-
-	uint32		xlog_blcksz;	/* block size within WAL files */
-	uint32		xlog_seg_size;	/* size of each WAL segment */
-
-	uint32		nameDataLen;	/* catalog name field width */
-	uint32		indexMaxKeys;	/* max number of columns in an index */
-
-	uint32		toast_max_chunk_size;	/* chunk size in TOAST tables */
-	uint32		loblksize;		/* chunk size in pg_largeobject */
-
-	bool		float4ByVal;	/* float4 pass-by-value? */
-	bool		float8ByVal;	/* float8, int8, etc pass-by-value? */
-
-	uint32		data_checksum_version;
-} ControlFileData12;
-#endif
-
 extern int get_pg_version(const char *data_directory, char *version_string);
-extern bool get_db_state(const char *data_directory, DBState *state);
+extern DBState get_db_state(const char *data_directory);
 extern const char *describe_db_state(DBState state);
 extern int	get_data_checksum_version(const char *data_directory);
 extern uint64 get_system_identifier(const char *data_directory);
--- a/dbutils.c
+++ b/dbutils.c
--- a/dbutils.h
+++ b/dbutils.h
@@ -1,7 +1,7 @@
 /*
 * dbutils.h
 *
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -29,35 +29,9 @@
 #include "strutil.h"
 #include "voting.h"

-#define REPMGR_NODES_COLUMNS \
-	"n.node_id, " \
-	"n.type, " \
-	"n.upstream_node_id, " \
-	"n.node_name,  " \
-	"n.conninfo, " \
-	"n.repluser, " \
-	"n.slot_name, " \
-	"n.location, " \
-	"n.priority, " \
-	"n.active, " \
-	"n.config_file, " \
-	"'' AS upstream_node_name, " \
-	"NULL AS attached "
-
-#define REPMGR_NODES_COLUMNS_WITH_UPSTREAM \
-	"n.node_id, " \
-	"n.type, " \
-	"n.upstream_node_id, " \
-	"n.node_name, " \
-	"n.conninfo, " \
-	"n.repluser, " \
-	"n.slot_name, " \
-	"n.location, " \
-	"n.priority, " \
-	"n.active, "\
-	"n.config_file, " \
-	"un.node_name AS upstream_node_name, " \
-	"NULL AS attached "
+#define REPMGR_NODES_COLUMNS "n.node_id, n.type, n.upstream_node_id, n.node_name, n.conninfo, n.repluser, n.slot_name, n.location, n.priority, n.active, n.config_file, '' AS upstream_node_name "
+#define BDR2_NODES_COLUMNS "node_sysid, node_timeline, node_dboid, node_name, node_local_dsn, ''"
+#define BDR3_NODES_COLUMNS "ns.node_id, 0, 0, ns.node_name, ns.interface_connstr, ns.peer_state_name"


 #define ERRBUFF_SIZE 512
@@ -67,7 +41,8 @@ typedef enum
 	UNKNOWN = 0,
 	PRIMARY,
 	STANDBY,
-	WITNESS
+	WITNESS,
+	BDR
 } t_server_type;

 typedef enum
@@ -117,23 +92,9 @@ typedef enum
 	CONN_ERROR
 } ConnectionStatus;

-typedef enum
-{
-	/* unable to query "pg_stat_replication" or other error */
-	NODE_ATTACHED_UNKNOWN = -1,
-	/* node has record in "pg_stat_replication" and state is not "streaming" */
-	NODE_ATTACHED,
-	/* node has record in "pg_stat_replication" but state is not "streaming" */
-	NODE_NOT_ATTACHED,
-	/* node has no record in "pg_stat_replication" */
-	NODE_DETACHED
-} NodeAttached;
-
 typedef enum
 {
 	SLOT_UNKNOWN = -1,
-	SLOT_NOT_FOUND,
-	SLOT_NOT_PHYSICAL,
 	SLOT_INACTIVE,
 	SLOT_ACTIVE
 } ReplSlotStatus;
@@ -146,7 +107,6 @@ typedef enum
 } BackupState;


-
 /*
 * Struct to store extension version information
 */
@@ -165,29 +125,8 @@ typedef struct s_extension_versions {
 	UNKNOWN_SERVER_VERSION_NUM \
 }

-
-typedef struct
-{
-	char		current_timestamp[MAXLEN];
-	bool		in_recovery;
-	TimeLineID	timeline_id;
-	char		timeline_id_str[MAXLEN];
-	XLogRecPtr	last_wal_receive_lsn;
-	XLogRecPtr	last_wal_replay_lsn;
-	char		last_xact_replay_timestamp[MAXLEN];
-	int			replication_lag_time;
-	bool		receiving_streamed_wal;
-	bool		wal_replay_paused;
-	int			upstream_last_seen;
-	int			upstream_node_id;
-} ReplInfo;
-
 /*
- * Struct to store node information.
- *
- * The first section represents the contents of the "repmgr.nodes"
- * table; subsequent section contain information collated in
- * various contexts.
+ * Struct to store node information
 */
 typedef struct s_node_info
 {
@@ -195,8 +134,8 @@ typedef struct s_node_info
 	int			node_id;
 	int			upstream_node_id;
 	t_server_type type;
-	char		node_name[NAMEDATALEN];
-	char		upstream_node_name[NAMEDATALEN];
+	char		node_name[MAXLEN];
+	char		upstream_node_name[MAXLEN];
 	char		conninfo[MAXLEN];
 	char		repluser[NAMEDATALEN];
 	char		location[MAXLEN];
@@ -213,7 +152,7 @@ typedef struct s_node_info
 	/* for ad-hoc use e.g. when working with a list of nodes */
 	char		details[MAXLEN];
 	bool		reachable;
-	NodeAttached attached;
+	bool		attached;
 	/* various statistics */
 	int			max_wal_senders;
 	int			attached_wal_receivers;
@@ -221,8 +160,6 @@ typedef struct s_node_info
 	int			total_replication_slots;
 	int			active_replication_slots;
 	int			inactive_replication_slots;
-	/* replication info */
-	ReplInfo   *replication_info;
 } t_node_info;


@@ -249,8 +186,7 @@ typedef struct s_node_info
 	/* for ad-hoc use e.g. when working with a list of nodes */ \
 	"", true, true,	\
 	/* various statistics */ \
-	-1, -1, -1, -1, -1, -1,	\
-	NULL \
+	-1, -1, -1, -1, -1, -1					\
 }


@@ -326,6 +262,55 @@ typedef struct s_connection_user
 #define T_CONNECTION_USER_INITIALIZER { "", false }


+/* represents an entry in bdr.bdr_nodes */
+typedef struct s_bdr_node_info
+{
+	char		node_sysid[MAXLEN];
+	uint32		node_timeline;
+	uint32		node_dboid;
+	char		node_name[MAXLEN];
+	char		node_local_dsn[MAXLEN];
+	char		peer_state_name[MAXLEN];
+} t_bdr_node_info;
+
+#define T_BDR_NODE_INFO_INITIALIZER { \
+	"", InvalidOid, InvalidOid, \
+    "", "", "" \
+}
+
+
+/* structs to store a list of BDR node records */
+typedef struct BdrNodeInfoListCell
+{
+	struct BdrNodeInfoListCell *next;
+	t_bdr_node_info *node_info;
+} BdrNodeInfoListCell;
+
+typedef struct BdrNodeInfoList
+{
+	BdrNodeInfoListCell *head;
+	BdrNodeInfoListCell *tail;
+	int			node_count;
+} BdrNodeInfoList;
+
+#define T_BDR_NODE_INFO_LIST_INITIALIZER { \
+	NULL, \
+	NULL, \
+	0 \
+}
+
+typedef struct
+{
+	char		current_timestamp[MAXLEN];
+	XLogRecPtr	last_wal_receive_lsn;
+	XLogRecPtr	last_wal_replay_lsn;
+	char		last_xact_replay_timestamp[MAXLEN];
+	int			replication_lag_time;
+	bool		receiving_streamed_wal;
+	bool		wal_replay_paused;
+	int			upstream_last_seen;
+} ReplInfo;
+
 typedef struct
 {
 	char		filepath[MAXPGPATH];
@@ -335,7 +320,6 @@ typedef struct

 #define T_CONFIGFILE_INFO_INITIALIZER { "", "", false }

-
 typedef struct
 {
 	int			size;
@@ -345,7 +329,6 @@ typedef struct

 #define T_CONFIGFILE_LIST_INITIALIZER { 0, 0, NULL }

-
 typedef struct
 {
 	uint64		system_identifier;
@@ -385,6 +368,10 @@ typedef struct RepmgrdInfo {
 /* utility functions */

 XLogRecPtr	parse_lsn(const char *str);
+
+extern void
+wrap_ddl_query(PQExpBufferData *query_buf, int replication_type, const char *fmt,...)
+__attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 4)));
 bool		atobool(const char *value);

 /* connection functions */
@@ -393,19 +380,12 @@ PGconn	   *establish_db_connection(const char *conninfo,
 PGconn	   *establish_db_connection_quiet(const char *conninfo);
 PGconn	   *establish_db_connection_by_params(t_conninfo_param_list *param_list,
 								  const bool exit_on_error);
-PGconn	   *establish_db_connection_with_replacement_param(const char *conninfo,
-														   const char *param,
-														   const char *value,
-														   const bool exit_on_error);
-PGconn	   *establish_replication_connection_from_conn(PGconn *conn, const char *repluser);
-PGconn	   *establish_replication_connection_from_conninfo(const char *conninfo, const char *repluser);
-
 PGconn	   *establish_primary_db_connection(PGconn *conn,
 								const bool exit_on_error);
 PGconn	   *get_primary_connection(PGconn *standby_conn, int *primary_id, char *primary_conninfo_out);
 PGconn	   *get_primary_connection_quiet(PGconn *standby_conn, int *primary_id, char *primary_conninfo_out);
-PGconn	   *duplicate_connection(PGconn *conn, const char *user, bool replication);

+bool		is_superuser_connection(PGconn *conn, t_connection_user *userinfo);
 void		close_connection(PGconn **conn);

 /* conninfo manipulation functions */
@@ -418,7 +398,6 @@ void		conn_to_param_list(PGconn *conn, t_conninfo_param_list *param_list);
 void		param_set(t_conninfo_param_list *param_list, const char *param, const char *value);
 void		param_set_ine(t_conninfo_param_list *param_list, const char *param, const char *value);
 char	   *param_get(t_conninfo_param_list *param_list, const char *param);
-bool		validate_conninfo_string(const char *conninfo_str, char **errmsg);
 bool		parse_conninfo_string(const char *conninfo_str, t_conninfo_param_list *param_list, char **errmsg, bool ignore_local_params);
 char	   *param_list_to_string(t_conninfo_param_list *param_list);
 char	   *normalize_conninfo_string(const char *conninfo_str);
@@ -434,9 +413,8 @@ bool		rollback_transaction(PGconn *conn);
 bool		set_config(PGconn *conn, const char *config_param, const char *config_value);
 bool		set_config_bool(PGconn *conn, const char *config_param, bool state);
 int		    guc_set(PGconn *conn, const char *parameter, const char *op, const char *value);
+int			guc_set_typed(PGconn *conn, const char *parameter, const char *op, const char *value, const char *datatype);
 bool		get_pg_setting(PGconn *conn, const char *setting, char *output);
-bool		get_pg_setting_bool(PGconn *conn, const char *setting, bool *output);
-bool		get_pg_setting_int(PGconn *conn, const char *setting, int *output);
 bool		alter_system_int(PGconn *conn, const char *name, int value);
 bool		pg_reload_conf(PGconn *conn);

@@ -448,16 +426,7 @@ RecoveryType get_recovery_type(PGconn *conn);
 int			get_primary_node_id(PGconn *conn);
 int			get_ready_archive_files(PGconn *conn, const char *data_directory);
 bool		identify_system(PGconn *repl_conn, t_system_identification *identification);
-uint64		system_identifier(PGconn *conn);
 TimeLineHistoryEntry *get_timeline_history(PGconn *repl_conn, TimeLineID tli);
-pid_t		get_wal_receiver_pid(PGconn *conn);
-
-/* user/role information functions */
-bool		can_execute_pg_promote(PGconn *conn);
-bool		can_disable_walsender(PGconn *conn);
-bool		connection_has_pg_monitor_role(PGconn *conn, const char *subrole);
-bool		is_replication_role(PGconn *conn, char *rolname);
-bool		is_superuser_connection(PGconn *conn, t_connection_user *userinfo);

 /* repmgrd shared memory functions */
 bool		repmgrd_set_local_node_id(PGconn *conn, int local_node_id);
@@ -469,8 +438,7 @@ pid_t		repmgrd_get_pid(PGconn *conn);
 bool		repmgrd_is_running(PGconn *conn);
 bool		repmgrd_is_paused(PGconn *conn);
 bool		repmgrd_pause(PGconn *conn, bool pause);
-int			repmgrd_get_upstream_node_id(PGconn *conn);
-bool		repmgrd_set_upstream_node_id(PGconn *conn, int node_id);
+pid_t		get_wal_receiver_pid(PGconn *conn);

 /* extension functions */
 ExtensionStatus get_repmgr_extension_status(PGconn *conn, t_extension_versions *extversions);
@@ -497,10 +465,8 @@ bool		get_local_node_record(PGconn *conn, int node_id, t_node_info *node_info);
 bool		get_primary_node_record(PGconn *conn, t_node_info *node_info);

 bool		get_all_node_records(PGconn *conn, NodeInfoList *node_list);
-bool		get_all_nodes_count(PGconn *conn, int *count);
 void		get_downstream_node_records(PGconn *conn, int node_id, NodeInfoList *nodes);
 void		get_active_sibling_node_records(PGconn *conn, int node_id, int upstream_node_id, NodeInfoList *node_list);
-bool		get_child_nodes(PGconn *conn, int node_id, NodeInfoList *node_list);
 void		get_node_records_by_priority(PGconn *conn, NodeInfoList *node_list);
 bool		get_all_node_records_with_upstream(PGconn *conn, NodeInfoList *node_list);
 bool		get_downstream_nodes_with_missing_slot(PGconn *conn, int this_node_id, NodeInfoList *noede_list);
@@ -536,14 +502,10 @@ PGresult   *get_event_records(PGconn *conn, int node_id, const char *node_name,

 /* replication slot functions */
 void		create_slot_name(char *slot_name, int node_id);
-
-bool		create_replication_slot_sql(PGconn *conn, char *slot_name, PQExpBufferData *error_msg);
-bool		create_replication_slot_replprot(PGconn *conn, PGconn *repl_conn, char *slot_name, PQExpBufferData *error_msg);
-bool		drop_replication_slot_sql(PGconn *conn, char *slot_name);
-bool		drop_replication_slot_replprot(PGconn *repl_conn, char *slot_name);
-
+bool		create_replication_slot(PGconn *conn, char *slot_name, PQExpBufferData *error_msg);
+bool		drop_replication_slot(PGconn *conn, char *slot_name);
 RecordStatus get_slot_record(PGconn *conn, char *slot_name, t_replication_slot *record);
-int			get_free_replication_slot_count(PGconn *conn, int *max_replication_slots);
+int			get_free_replication_slot_count(PGconn *conn);
 int			get_inactive_replication_slots(PGconn *conn, KeyValueList *list);

 /* tablespace functions */
@@ -555,7 +517,6 @@ int			wait_connection_availability(PGconn *conn, int timeout);

 /* node availability functions */
 bool		is_server_available(const char *conninfo);
-bool		is_server_available_quiet(const char *conninfo);
 bool		is_server_available_params(t_conninfo_param_list *param_list);
 ExecStatusType	connection_ping(PGconn *conn);
 ExecStatusType	connection_ping_reconnect(PGconn *conn);
@@ -595,17 +556,32 @@ XLogRecPtr	get_last_wal_receive_location(PGconn *conn);
 void		init_replication_info(ReplInfo *replication_info);
 bool		get_replication_info(PGconn *conn, t_server_type node_type, ReplInfo *replication_info);
 int			get_replication_lag_seconds(PGconn *conn);
-TimeLineID	get_node_timeline(PGconn *conn, char *timeline_id_str);
 void		get_node_replication_stats(PGconn *conn, t_node_info *node_info);
-NodeAttached is_downstream_node_attached(PGconn *conn, char *node_name, char **node_state);
-NodeAttached is_downstream_node_attached_quiet(PGconn *conn, char *node_name, char **node_state);
-void		set_upstream_last_seen(PGconn *conn, int upstream_node_id);
+bool		is_downstream_node_attached(PGconn *conn, char *node_name);
+void		set_upstream_last_seen(PGconn *conn);
 int			get_upstream_last_seen(PGconn *conn, t_server_type node_type);
-
 bool		is_wal_replay_paused(PGconn *conn, bool check_pending_wal);

-/* repmgrd status functions */
-CheckStatus	get_repmgrd_status(PGconn *conn);
+/* BDR functions */
+int			get_bdr_version_num(void);
+void		get_all_bdr_node_records(PGconn *conn, BdrNodeInfoList *node_list);
+RecordStatus get_bdr_node_record_by_name(PGconn *conn, const char *node_name, t_bdr_node_info *node_info);
+bool		is_bdr_db(PGconn *conn, PQExpBufferData *output);
+bool		is_bdr_db_quiet(PGconn *conn);
+bool		is_active_bdr_node(PGconn *conn, const char *node_name);
+bool		is_bdr_repmgr(PGconn *conn);
+char	   *get_default_bdr_replication_set(PGconn *conn);
+bool		is_table_in_bdr_replication_set(PGconn *conn, const char *tablename, const char *set);
+bool		add_table_to_bdr_replication_set(PGconn *conn, const char *tablename, const char *set);
+void		add_extension_tables_to_bdr_replication_set(PGconn *conn);
+bool		bdr_node_name_matches(PGconn *conn, const char *node_name, PQExpBufferData *bdr_local_node_name);
+ReplSlotStatus get_bdr_node_replication_slot_status(PGconn *conn, const char *node_name);
+void		get_bdr_other_node_name(PGconn *conn, int node_id, char *name_buf);
+
+bool		am_bdr_failover_handler(PGconn *conn, int node_id);
+void		unset_bdr_failover_handler(PGconn *conn);
+bool		bdr_node_has_repmgr_set(PGconn *conn, const char *node_name);
+bool		bdr_node_set_repmgr_set(PGconn *conn, const char *node_name);

 /* miscellaneous debugging functions */
 const char *print_node_status(NodeStatus node_status);
--- a/dirutil.c
+++ b/dirutil.c
@@ -3,7 +3,7 @@
 * dirmod.c
 *	  directory handling functions
 *
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -109,56 +109,9 @@ create_dir(const char *path)


 bool
-set_dir_permissions(const char *path, int server_version_num)
+set_dir_permissions(const char *path)
 {
-	struct stat stat_buf;
-	bool no_group_access =
-		(server_version_num != UNKNOWN_SERVER_VERSION_NUM) &&
-		(server_version_num < 110000);
-	/*
-	 * At this point the path should exist, so this check is very
-	 * much just-in-case.
-	 */
-	if (stat(path, &stat_buf) != 0)
-	{
-		if (errno == ENOENT)
-		{
-			log_warning(_("directory \"%s\" does not exist"), path);
-		}
-		else
-		{
-			log_warning(_("could not read permissions of directory \"%s\""),
-						path);
-			log_detail("%s", strerror(errno));
-		}
-
-		return false;
-	}
-
-	/*
-	 * If mode is not 0700 or 0750, attempt to change.
-	 */
-	if ((no_group_access == true  && (stat_buf.st_mode & (S_IRWXG | S_IRWXO)))
-	 || (no_group_access == false && (stat_buf.st_mode & (S_IWGRP | S_IRWXO))))
-	{
-		/*
-		 * Currently we default to 0700.
-		 * There is no facility to override this directly,
-		 * but the user can manually create the directory with
-		 * the desired permissions.
-		 */
-
-		if (chmod(path, 0700) != 0) {
-			log_error(_("unable to change permissions of directory \"%s\""), path);
-			log_detail("%s", strerror(errno));
-			return false;
-		}
-
-		return true;
-	}
-
-	/* Leave as-is */
-	return true;
+	return (chmod(path, 0700) != 0) ? false : true;
 }


@@ -205,7 +158,7 @@ mkdir_p(char *path, mode_t omode)
 			/*
 			 * POSIX 1003.2: For each dir operand that does not name an
 			 * existing directory, effects equivalent to those caused by the
-			 * following command shall occur:
+			 * following command shall occcur:
 			 *
 			 * mkdir -p -m $(umask -S),u+wx $(dirname dir) && mkdir [-m mode]
 			 * dir
@@ -289,7 +242,7 @@ is_pg_running(const char *path)
 	{
 		/*
 		 * No PID file - PostgreSQL shouldn't be running. From 9.3 (the
-		 * earliest version we care about) removal of the PID file will
+		 * earliesty version we care about) removal of the PID file will
 		 * cause the postmaster to shut down, so it's highly unlikely
 		 * that PostgreSQL will still be running.
 		 */
@@ -323,8 +276,6 @@ is_pg_running(const char *path)
 			log_warning(_("invalid data in PostgreSQL PID file \"%s\""), path);
 		}

-		fclose(pidf);
-
 		return PG_DIR_NOT_RUNNING;
 	}

@@ -350,7 +301,7 @@ create_pg_dir(const char *path, bool force)
 	switch (check_dir(path))
 	{
 		case DIR_NOENT:
-			/* Directory does not exist, attempt to create it. */
+			/* directory does not exist, attempt to create it */
 			log_info(_("creating directory \"%s\"..."), path);

 			if (!create_dir(path))
@@ -361,23 +312,14 @@ create_pg_dir(const char *path, bool force)
 			}
 			break;
 		case DIR_EMPTY:
-			/*
-			 * Directory exists but empty, fix permissions and use it.
-			 *
-			 * Note that at this point the caller might not know the server
-			 * version number, so in this case "set_dir_permissions()" will
-			 * accept 0750 as a valid setting. As this is invalid in Pg10 and
-			 * earlier,  the caller should call "set_dir_permissions()" again
-			 * when it has the number.
-			 *
-			 * We need to do the permissions check here in any case to catch
-			 * fatal permissions early.
-			 */
+			/* exists but empty, fix permissions and use it */
 			log_info(_("checking and correcting permissions on existing directory \"%s\""),
 					 path);

-			if (!set_dir_permissions(path, UNKNOWN_SERVER_VERSION_NUM))
+			if (!set_dir_permissions(path))
 			{
+				log_error(_("unable to change permissions of directory \"%s\""), path);
+				log_detail("%s", strerror(errno));
 				return false;
 			}
 			break;
@@ -392,15 +334,6 @@ create_pg_dir(const char *path, bool force)
 				{
 					log_notice(_("-F/--force provided - deleting existing data directory \"%s\""), path);
 					nftw(path, unlink_dir_callback, 64, FTW_DEPTH | FTW_PHYS);
-
-					/* recreate the directory ourselves to ensure permissions are correct */
-					if (!create_dir(path))
-					{
-						log_error(_("unable to create directory \"%s\"..."),
-								  path);
-						return false;
-					}
-
 					return true;
 				}

@@ -412,15 +345,6 @@ create_pg_dir(const char *path, bool force)
 				{
 					log_notice(_("deleting existing directory \"%s\""), path);
 					nftw(path, unlink_dir_callback, 64, FTW_DEPTH | FTW_PHYS);
-
-					/* recreate the directory ourselves to ensure permissions are correct */
-					if (!create_dir(path))
-					{
-						log_error(_("unable to create directory \"%s\"..."),
-								  path);
-						return false;
-					}
-
 					return true;
 				}
 				return false;
--- a/dirutil.h
+++ b/dirutil.h
@@ -1,6 +1,6 @@
 /*
 * dirutil.h
- * Copyright (c) EnterpriseDB Corporation, 2010-2021
+ * Copyright (c) 2ndQuadrant, 2010-2019
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -35,7 +35,7 @@ typedef enum
 } PgDirState;

 extern int	mkdir_p(char *path, mode_t omode);
-extern bool set_dir_permissions(const char *path, int server_version_num);
+extern bool set_dir_permissions(const char *path);

 extern DataDirState	check_dir(const char *path);
 extern bool create_dir(const char *path);
--- a/doc/.gitignore
+++ b/doc/.gitignore
@@ -1,9 +1,7 @@
 HTML.index
-bookindex.xml
+bookindex.sgml
 html-stamp
 html/
+nochunks.dsl
 repmgr.html
-version.xml
-*.fo
-*.pdf
-*.sgml
+version.sgml
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -1,104 +0,0 @@
-# Make "html" the default target, since that is what most people tend
-# to want to use.
-html:
-
-all: html
-
-subdir = doc
-repmgr_top_builddir = ..
-include $(repmgr_top_builddir)/Makefile.global
-
-XMLINCLUDE = --path .
-
-ifndef XMLLINT
-XMLLINT = $(missing) xmllint
-endif
-
-ifndef XSLTPROC
-XSLTPROC = $(missing) xsltproc
-endif
-
-ifndef FOP
-FOP = $(missing) fop
-endif
-
-override XSLTPROCFLAGS += --stringparam repmgr.version '$(REPMGR_VERSION)'
-
-GENERATED_XML = version.xml
-ALLXML := $(wildcard $(srcdir)/*.xml) $(GENERATED_XML)
-
-
-version.xml: $(repmgr_top_builddir)/repmgr_version.h
-	{ \
-	  echo "<!ENTITY repmgrversion \"$(REPMGR_VERSION)\">"; \
-	  echo "<!ENTITY releasedate \"$(REPMGR_RELEASE_DATE)\">"; \
-	} > $@
-
-##
-## HTML
-##
-
-
-html: html-stamp
-
-html-stamp: stylesheet.xsl repmgr.xml $(ALLXML)
-	$(XMLLINT) $(XMLINCLUDE) --noout --valid $(word 2,$^)
-	$(XSLTPROC) $(XMLINCLUDE) $(XSLTPROCFLAGS) $(XSLTPROC_HTML_FLAGS) $(wordlist 1,2,$^)
-	cp $(srcdir)/stylesheet.css  $(srcdir)/website-docs.css html/
-	touch $@
-
-# single-page HTML
-repmgr.html: stylesheet-html-nochunk.xsl repmgr.xml $(ALLXML)
-	$(XMLLINT) $(XMLINCLUDE) --noout --valid $(word 2,$^)
-	$(XSLTPROC) $(XMLINCLUDE) $(XSLTPROCFLAGS) $(XSLTPROC_HTML_FLAGS) -o $@ $(wordlist 1,2,$^)
-
-
-zip: html
-	cp -r html repmgr-docs-$(REPMGR_VERSION)
-	zip -r repmgr-docs-$(REPMGR_VERSION).zip repmgr-docs-$(REPMGR_VERSION)
-	rm -rf repmgr-docs-$(REPMGR_VERSION)
-
-##
-## Print
-##
-
-repmgr.pdf:
-	$(error Invalid target; use repmgr-A4.pdf or repmgr-US.pdf as targets)
-
-# Standard paper size
-
-repmgr-A4.fo: stylesheet-fo.xsl repmgr.xml $(ALLXML)
-	$(XMLLINT) $(XMLINCLUDE) --noout --valid $(word 2,$^)
-	$(XSLTPROC) $(XMLINCLUDE) $(XSLTPROCFLAGS) --stringparam paper.type A4 -o $@ $(wordlist 1,2,$^)
-
-repmgr-A4.pdf: repmgr-A4.fo
-	$(FOP) -fo $< -pdf $@
-
-# North American paper size
-
-repmgr-US.fo: stylesheet-fo.xsl repmgr.xml $(ALLXML)
-	$(XMLLINT) $(XMLINCLUDE) --noout --valid $(word 2,$^)
-	$(XSLTPROC) $(XMLINCLUDE) $(XSLTPROCFLAGS) --stringparam paper.type USletter -o $@ $(wordlist 1,2,$^)
-
-repmgr-US.pdf: repmgr-US.fo
-	$(FOP) -fo $< -pdf $@
-
-
-install: html
-	@$(MKDIR_P) $(DESTDIR)$(docdir)/$(docmoduledir)/repmgr
-	@$(INSTALL_DATA) $(wildcard html/*.html) $(wildcard html/*.css) $(DESTDIR)$(docdir)/$(docmoduledir)/repmgr
-	@echo Installed docs to $(DESTDIR)$(docdir)/$(docmoduledir)/repmgr
-
-clean:
-	rm -f html-stamp
-	rm -f HTML.index $(GENERATED_XML)
-	rm -f repmgr.html
-	rm -f repmgr-A4.pdf
-	rm -f repmgr-US.pdf
-	rm -f *.fo
-	rm -f html/*
-
-maintainer-clean:
-	rm -rf html
-
-.PHONY: html
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -0,0 +1,76 @@
+repmgr_subdir = doc
+repmgr_top_builddir = ..
+include $(repmgr_top_builddir)/Makefile.global
+
+ifndef JADE
+JADE = $(missing) jade
+endif
+
+SGMLINCLUDE = -D . -D ${srcdir}
+
+SPFLAGS += -wall -wno-unused-param -wno-empty -wfully-tagged
+
+JADE.html.call = $(JADE) $(JADEFLAGS) $(SPFLAGS) $(SGMLINCLUDE) $(CATALOG) -t sgml -i output-html
+
+ALLSGML := $(wildcard $(srcdir)/*.sgml)
+# to build bookindex
+ALMOSTALLSGML := $(filter-out %bookindex.sgml,$(ALLSGML))
+GENERATED_SGML = version.sgml bookindex.sgml
+
+Makefile: Makefile.in
+	cd $(repmgr_top_builddir) && ./config.status doc/Makefile
+
+all: html
+
+html: html-stamp
+
+html-stamp: repmgr.sgml $(ALLSGML) $(GENERATED_SGML) stylesheet.dsl website-docs.css
+	$(MKDIR_P) html
+	$(JADE.html.call) -d stylesheet.dsl -i include-index $<
+	cp $(srcdir)/stylesheet.css $(srcdir)/website-docs.css html/
+	touch $@
+
+repmgr.html: repmgr.sgml $(ALLSGML) $(GENERATED_SGML) stylesheet.dsl website-docs.css
+	sed '/html-index-filename/a\
+(define nochunks  #t)' <stylesheet.dsl >nochunks.dsl
+	$(JADE.html.call) -d nochunks.dsl -i include-index $< >repmgr.html
+
+version.sgml: ${repmgr_top_builddir}/repmgr_version.h
+	{ \
+	  echo "<!ENTITY repmgrversion \"$(REPMGR_VERSION)\">"; \
+	} > $@
+
+HTML.index: repmgr.sgml $(ALMOSTALLSGML) stylesheet.dsl
+	@$(MKDIR_P) html
+	$(JADE.html.call) -d stylesheet.dsl -V html-index $<
+
+website-docs.css:
+	@$(MKDIR_P) html
+	curl http://www.postgresql.org/media/css/docs.css > ${srcdir}/website-docs.css
+
+bookindex.sgml: HTML.index
+ifdef COLLATEINDEX
+	LC_ALL=C $(PERL) $(COLLATEINDEX) -f -g -i 'bookindex' -o $@ $<
+else
+	@$(missing) collateindex.pl $< $@
+endif
+
+clean:
+	rm -f html-stamp
+	rm -f HTML.index $(GENERATED_SGML)
+
+maintainer-clean:
+	rm -rf html
+	rm -f Makefile
+
+zip: html
+	cp -r html repmgr-docs-$(REPMGR_VERSION)
+	zip -r repmgr-docs-$(REPMGR_VERSION).zip repmgr-docs-$(REPMGR_VERSION)
+	rm -rf repmgr-docs-$(REPMGR_VERSION)
+
+install: html
+	@$(MKDIR_P) $(DESTDIR)$(docdir)/$(docmoduledir)/repmgr
+	@$(INSTALL_DATA) $(wildcard html/*.html) $(wildcard html/*.css) $(DESTDIR)$(docdir)/$(docmoduledir)/repmgr
+	@echo Installed docs to $(DESTDIR)$(docdir)/$(docmoduledir)/repmgr
+
+.PHONY: html all
--- a/doc/appendix-faq.sgml
+++ b/doc/appendix-faq.sgml
@@ -0,0 +1,438 @@
+<appendix id="appendix-faq" xreflabel="FAQ">
+ <indexterm>
+  <primary>FAQ (Frequently Asked Questions)</primary>
+ </indexterm>
+
+ <title>FAQ (Frequently Asked Questions)</title>
+
+ <sect1 id="faq-general" xreflabel="General">
+  <title>General</title>
+
+  <sect2 id="faq-xrepmgr-version-diff" xreflabel="Version differences">
+    <title>What's the difference between the repmgr versions?</title>
+    <para>
+      &repmgr; 4 is a complete rewrite of the existing &repmgr; code base
+      and implements &repmgr; as a PostgreSQL extension. It
+      supports all PostgreSQL versions from 9.3 (although some &repmgr;
+      features are not available for PostgreSQL 9.3 and 9.4).
+     </para>
+     <para>
+      &repmgr; 3.x builds on the improved replication facilities added
+      in PostgreSQL 9.3, as well as improved automated failover support
+      via <application>repmgrd</application>, and is not compatible with PostgreSQL 9.2
+      and earlier. We recommend upgrading to &repmgr; 4, as the &repmgr; 3.x
+      series is no longer maintained.
+     </para>
+     <para>
+      &repmgr; 2.x supports PostgreSQL 9.0 ~ 9.3. While it is compatible
+      with PostgreSQL 9.3, we recommend using repmgr 4.x. &repmgr; 2.x is
+      no longer maintained.
+     </para>
+     <para>
+       See also <link linkend="install-compatibility-matrix">&repmgr; compatibility matrix</link>
+       and <link linkend="faq-upgrade-repmgr">Should I upgrade &repmgr;?</link>.
+     </para>
+  </sect2>
+
+  <sect2 id="faq-replication-slots-advantage" xreflabel="Advantages of replication slots">
+   <title>What's the advantage of using replication slots?</title>
+   <para>
+    Replication slots, introduced in PostgreSQL 9.4, ensure that the
+    primary server will retain WAL files until they have been consumed
+    by all standby servers. This means standby servers should never
+    fail due to not being able to retrieve required WAL files from the
+    primary.
+   </para>
+   <para>
+    However this does mean that if a standby is no longer connected to the
+    primary, the presence of the replication slot will cause WAL files
+    to be retained indefinitely, and eventually lead to disk space
+    exhaustion.
+   </para>
+
+   <tip>
+     <para>
+       2ndQuadrant's recommended configuration is to configure
+       <ulink url="https://www.pgbarman.org/">Barman</ulink> as a fallback
+       source of WAL files, rather than maintain replication slots for
+       each standby. See also: <link linkend="cloning-from-barman-restore-command">Using Barman as a WAL file source</link>.
+     </para>
+   </tip>
+  </sect2>
+
+  <sect2 id="faq-replication-slots-number" xreflabel="Number of replication slots">
+   <title>How many replication slots should I define in <varname>max_replication_slots</varname>?</title>
+   <para>
+    Normally at least same number as the number of standbys which will connect
+    to the node. Note that changes to <varname>max_replication_slots</varname> require a server
+    restart to take effect, and as there is no particular penalty for unused
+    replication slots, setting a higher figure will make adding new nodes
+    easier.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-hash-index" xreflabel="Hash indexes">
+   <title>Does &repmgr; support hash indexes?</title>
+   <para>
+    Before PostgreSQL 10, hash indexes were not WAL logged and are therefore not suitable
+    for use in streaming replication in PostgreSQL 9.6 and earlier. See the
+    <ulink url="https://www.postgresql.org/docs/9.6/sql-createindex.html#AEN80279">PostgreSQL documentation</ulink>
+    for details.
+   </para>
+   <para>
+    From PostgreSQL 10, this restriction has been lifted and hash indexes can be used
+    in a streaming replication cluster.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-upgrades" xreflabel="Upgrading PostgreSQL with repmgr">
+   <title>Can &repmgr; assist with upgrading a PostgreSQL cluster?</title>
+   <para>
+     For <emphasis>minor</emphasis> version upgrades, e.g. from 9.6.7 to 9.6.8, a common
+     approach is to upgrade a standby to the latest version, perform a
+     <link linkend="performing-switchover">switchover</link> promoting it to a primary,
+     then upgrade the former primary.
+   </para>
+   <para>
+     For <emphasis>major</emphasis> version upgrades (e.g. from PostgreSQL 9.6 to PostgreSQL 10),
+     the traditional approach is to "reseed" a cluster by upgrading a single
+     node with <ulink url="https://www.postgresql.org/docs/current/pgupgrade.html">pg_upgrade</ulink>
+     and recloning standbys from this.
+   </para>
+   <para>
+     To minimize downtime during major upgrades from PostgreSQL 9.4 and later,
+     <ulink url="https://www.2ndquadrant.com/en/resources/pglogical/">pglogical</ulink>
+     can be used to set up a parallel cluster using the newer PostgreSQL version,
+     which can be kept in sync with the existing production cluster until the
+     new cluster is ready to be put into production.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-libdir-repmgr-error">
+   <title>What does this error mean: <literal>ERROR: could not access file "$libdir/repmgr"</literal>?</title>
+   <para>
+     It means the &repmgr; extension code is not installed in the
+     PostgreSQL application directory. This typically happens when using PostgreSQL
+     packages provided by a third-party vendor, which often have different
+     filesystem layouts.
+   </para>
+   <para>
+     Either use PostgreSQL packages provided by the community or 2ndQuadrant; if this
+     is not possible, contact your vendor for assistance.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-old-packages">
+   <title>How can I obtain old versions of &repmgr; packages?</title>
+   <para>
+     See appendix <xref linkend="packages-old-versions"> for details.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-required-for-replication">
+    <title>Is &repmgr; required for streaming replication?</title>
+    <para>
+      No.
+    </para>
+    <para>
+     &repmgr; (together with <application>repmgrd</application>) assists with
+     <emphasis>managing</emphasis> replication. It does not actually perform replication, which
+     is part of the core PostgreSQL functionality.
+    </para>
+  </sect2>
+
+  <sect2 id="faq-what-if-repmgr-uninstalled">
+   <title>Will replication stop working if &repmgr; is uninstalled?</title>
+   <para>
+     No. See preceding question.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-version-mix">
+   <title>Does it matter if different &repmgr; versions are present in the replication cluster?</title>
+   <para>
+     Yes. If different &quot;major&quot; &repmgr; versions (e.g. 3.3.x and 4.1.x) are present,
+     &repmgr; (in particular <application>repmgrd</application>)
+     may not run, or run properly, or in the worst case (if different <application>repmgrd</application>
+     versions are running and there are differences in the failover implementation) break
+     your replication cluster.
+   </para>
+   <para>
+     If different &quot;minor&quot; &repmgr; versions (e.g. 4.1.1 and 4.1.6) are installed,
+     &repmgr; will function, but we strongly recommend always running the same version
+     to ensure there are no unexpected suprises, e.g. a newer version behaving slightly
+     differently to the older version.
+   </para>
+   <para>
+     See also <link linkend="faq-upgrade-repmgr">Should I upgrade &repmgr;?</link>.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-upgrade-repmgr">
+    <title>Should I upgrade &repmgr;?</title>
+    <para>
+      Yes.
+    </para>
+    <para>
+      We don't release new versions for fun, you know. Upgrading may require a little effort,
+      but running an older &repmgr; version with bugs which have since been fixed may end up
+      costing you more effort. The same applies to PostgreSQL itself.
+    </para>
+
+  </sect2>
+
+  <sect2 id="faq-repmgr-conf-data-directory">
+    <title>Why do I need to specify the data directory location in repmgr.conf?</title>
+    <para>
+      In some circumstances &repmgr; may need to access a PostgreSQL data
+      directory while the PostgreSQL server is not running, e.g. to confirm
+      it shut down cleanly during a <link linkend="performing-switchover">switchover</link>.
+    </para>
+    <para>
+      Additionally, this provides support when using &repmgr; on PostgreSQL 9.6 and
+      earlier, where the <literal>repmgr</literal> user is not a superuser; in that
+      case the <literal>repmgr</literal> user will not be able to access the
+      <literal>data_directory</literal> configuration setting, access to which is restricted
+      to superusers. (In PostgreSQL 10 and later, non-superusers can be added to the
+      group <option>pg_read_all_settings</option> which will enable them to read this setting).
+    </para>
+  </sect2>
+ </sect1>
+
+ <sect1 id="faq-repmgr" xreflabel="repmgr">
+  <title><command>repmgr</command></title>
+
+  <sect2 id="faq-register-existing-node" xreflabel="registering an existing node">
+   <title>Can I register an existing PostgreSQL server with repmgr?</title>
+   <para>
+    Yes, any existing PostgreSQL server which is part of the same replication
+    cluster can be registered with &repmgr;. There's no requirement for a
+    standby to have been cloned using &repmgr;.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-clone-other-source" >
+   <title>Can I use a standby not cloned by &repmgr; as a &repmgr; node?</title>
+
+   <para>
+     For a standby which has been manually cloned or recovered from an external
+     backup manager such as Barman, the command
+     <command><link linkend="repmgr-standby-clone">repmgr standby clone --recovery-conf-only</link></command>
+     can be used to create the correct <filename>recovery.conf</filename> file for
+     use with &repmgr; (and will create a replication slot if required). Once this has been done,
+     <link linkend="repmgr-standby-register">register the node</link> as usual.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-recovery-conf" >
+    <title>What does &repmgr; write in <filename>recovery.conf</filename>, and what options can be set there?</title>
+   <para>
+     See section <link linkend="repmgr-standby-clone-recovery-conf">Customising recovery.conf</link>.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-failed-primary-standby" xreflabel="Reintegrate a failed primary as a standby">
+   <title>How can a failed primary be re-added as a standby?</title>
+   <para>
+    This is a two-stage process. First, the failed primary's data directory
+    must be re-synced with the current primary; secondly the failed primary
+    needs to be re-registered as a standby.
+   </para>
+   <para>
+    It's possible to use <command>pg_rewind</command> to re-synchronise the existing data
+    directory, which will usually be much
+    faster than re-cloning the server. However <command>pg_rewind</command> can only
+    be used if PostgreSQL either has <varname>wal_log_hints</varname> enabled, or
+    data checksums were enabled when the cluster was initialized.
+   </para>
+   <para>
+     Note that <command>pg_rewind</command> is available as part of the core PostgreSQL
+     distribution from PostgreSQL 9.5, and as a third-party utility for PostgreSQL 9.3 and 9.4.
+   </para>
+   <para>
+    &repmgr; provides the command <command>repmgr node rejoin</command> which can
+    optionally execute <command>pg_rewind</command>; see the <xref linkend="repmgr-node-rejoin">
+    documentation for details, in particular the section <xref linkend="repmgr-node-rejoin-pg-rewind">.
+   </para>
+   <para>
+    If <command>pg_rewind</command> cannot be used, then the data directory will need
+    to be re-cloned from scratch.
+   </para>
+
+  </sect2>
+
+  <sect2 id="faq-repmgr-check-configuration" xreflabel="Check PostgreSQL configuration">
+   <title>Is there an easy way to check my primary server is correctly configured for use with &repmgr;?</title>
+   <para>
+    Execute <command><link linkend="repmgr-standby-clone">repmgr standby clone</link></command>
+    with the <literal>--dry-run</literal> option; this will report any configuration problems
+    which need to be rectified.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-clone-skip-config-files" xreflabel="">
+   <title>When cloning a standby, how can I get &repmgr; to copy
+     <filename>postgresql.conf</filename> and <filename>pg_hba.conf</filename> from the PostgreSQL configuration
+     directory in <filename>/etc</filename>?</title>
+   <para>
+    Use the command line option <literal>--copy-external-config-files</literal>. For more details
+    see <xref linkend="repmgr-standby-clone-config-file-copying">.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-shared-preload-libaries-no-repmgrd" xreflabel="shared_preload_libraries without repmgrd">
+    <title>Do I need to include <literal>shared_preload_libraries = 'repmgr'</literal>
+      in <filename>postgresql.conf</filename> if I'm not using <application>repmgrd</application>?</title>
+   <para>
+    No, the <literal>repmgr</literal> shared library is only needed when running <application>repmgrd</application>.
+    If you later decide to run <application>repmgrd</application>, you just need to add
+    <literal>shared_preload_libraries = 'repmgr'</literal> and restart PostgreSQL.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-permissions" xreflabel="Replication permission problems">
+   <title>I've provided replication permission for the <literal>repmgr</literal> user in <filename>pg_hba.conf</filename>
+     but <command>repmgr</command>/<application>repmgrd</application> complains it can't connect to the server... Why?</title>
+   <para>
+    <command>repmgr</command> and <application>repmgrd</application> need to be able to connect to the repmgr database
+    with a normal connection to query metadata. The <literal>replication</literal> connection
+    permission is for PostgreSQL's streaming replication (and doesn't  necessarily need to be the <literal>repmgr</literal> user).
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-clone-provide-primary-conninfo" xreflabel="Providing primary connection parameters">
+   <title>When cloning a standby, why do I need to provide the connection parameters
+     for the primary server on the command line, not in the configuration file?</title>
+   <para>
+    Cloning a standby is a one-time action; the role of the server being cloned
+    from could change, so fixing it in the configuration file would create
+    confusion. If &repmgr; needs to establish a connection to the primary
+    server, it can retrieve this from the <literal>repmgr.nodes</literal> table on the local
+    node, and if necessary scan the replication cluster until it locates the active primary.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-clone-waldir-xlogdir" xreflabel="Providing a custom WAL directory">
+   <title>When cloning a standby, how do I ensure the WAL files are placed in a custom directory?</title>
+   <para>
+     Provide the option <literal>--waldir</literal>  (<literal>--xlogdir</literal> in PostgreSQL 9.6
+     and earlier) with the absolute path to the WAL directory in <varname>pg_basebackup_options</varname>.
+     For more details see <xref linkend="cloning-advanced-pg-basebackup-options">.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-events-no-fkey" xreflabel="No foreign key on node_id in repmgr.events">
+   <title>Why is there no foreign key on the <literal>node_id</literal> column in the <literal>repmgr.events</literal>
+     table?</title>
+   <para>
+     Under some circumstances event notifications can be generated for servers
+     which have not yet been registered; it's also useful to retain a record
+     of events which includes servers removed from the replication cluster
+     which no longer have an entry in the <literal>repmgr.nodes</literal> table.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgr-recovery-conf-quoted-values" xreflabel="Quoted values in recovery.conf">
+    <title>Why are some values in <filename>recovery.conf</filename> surrounded by pairs of single quotes?</title>
+    <para>
+      This is to ensure that user-supplied values which are written as parameter values in <filename>recovery.conf</filename>
+      are escaped correctly and do not cause errors when <filename>recovery.conf</filename> is parsed.
+    </para>
+    <para>
+      The escaping is performed by an internal PostgreSQL routine, which leaves strings consisting
+      of digits and alphabetical characters only as-is, but wraps everything else in pairs of single quotes,
+      even if the string does not contain any characters which need escaping.
+    </para>
+  </sect2>
+
+
+ </sect1>
+
+ <sect1 id="faq-repmgrd" xreflabel="repmgrd">
+  <title><application>repmgrd</application></title>
+
+
+  <sect2 id="faq-repmgrd-prevent-promotion" xreflabel="Prevent standby from being promoted to primary">
+   <title>How can I prevent a node from ever being promoted to primary?</title>
+   <para>
+     In <filename>repmgr.conf</filename>, set its priority to a value of <literal>0</literal>; apply the changed setting with
+    <command><link linkend="repmgr-standby-register">repmgr standby register --force</link></command>.
+   </para>
+   <para>
+    Additionally, if <varname>failover</varname> is set to <literal>manual</literal>, the node will never
+    be considered as a promotion candidate.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgrd-delayed-standby" xreflabel="Delayed standby support">
+   <title>Does <application>repmgrd</application> support delayed standbys?</title>
+   <para>
+    <application>repmgrd</application> can monitor delayed standbys - those set up with
+    <varname>recovery_min_apply_delay</varname> set to a non-zero value
+    in <filename>recovery.conf</filename> - but as it's not currently possible
+    to directly examine the value applied to the standby, <application>repmgrd</application>
+    may not be able to properly evaluate the node as a promotion candidate.
+   </para>
+   <para>
+    We recommend that delayed standbys are explicitly excluded from promotion
+    by setting <varname>priority</varname> to <literal>0</literal> in
+    <filename>repmgr.conf</filename>.
+   </para>
+   <para>
+    Note that after registering a delayed standby, <application>repmgrd</application> will only start
+    once the metadata added in the primary node has been replicated.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgrd-logfile-rotate" xreflabel="repmgrd logfile rotation">
+   <title>How can I get <application>repmgrd</application> to rotate its logfile?</title>
+   <para>
+     Configure your system's <literal>logrotate</literal> service to do this; see <xref linkend="repmgrd-log-rotation">.
+   </para>
+
+  </sect2>
+
+  <sect2 id="faq-repmgrd-recloned-no-start" xreflabel="repmgrd not restarting after node cloned">
+   <title>I've recloned a failed primary as a standby, but <application>repmgrd</application> refuses to start?</title>
+   <para>
+    Check you registered the standby after recloning. If unregistered, the standby
+    cannot be considered as a promotion candidate even if <varname>failover</varname> is set to
+    <literal>automatic</literal>, which is probably not what you want. <application>repmgrd</application> will start if
+    <varname>failover</varname> is set to <literal>manual</literal> so the node's replication status can still
+  be monitored, if desired.
+   </para>
+  </sect2>
+
+  <sect2 id="faq-repmgrd-pg-bindir" xreflabel="repmgrd does not apply pg_bindir to promote_command or follow_command">
+    <title>
+      <application>repmgrd</application> ignores pg_bindir when executing <varname>promote_command</varname> or <varname>follow_command</varname>
+    </title>
+    <para>
+      <varname>promote_command</varname> or <varname>follow_command</varname> can be user-defined scripts,
+      so &repmgr; will not apply <option>pg_bindir</option> even if excuting &repmgr;. Always provide the full
+      path; see <xref linkend="repmgrd-automatic-failover-configuration"> for more details.
+    </para>
+  </sect2>
+
+  <sect2 id="faq-repmgrd-startup-no-upstream" xreflabel="repmgrd does not start if upstream node is not running">
+    <title>
+      <application>repmgrd</application> aborts startup with the error "<literal>upstream node must be running before repmgrd can start</literal>"
+    </title>
+    <para>
+      <application>repmgrd</application> does this to avoid starting up on a replication cluster
+      which is not in a healthy state. If the upstream is unavailable, <application>repmgrd</application>
+      may initiate a failover immediately after starting up, which could have unintended side-effects,
+      particularly if <application>repmgrd</application> is not running on other nodes.
+    </para>
+    <para>
+      In particular, it's possible that the node's local copy of the <literal>repmgr.nodes</literal> copy
+      is out-of-date, which may lead to incorrect failover behaviour.
+    </para>
+    <para>
+      The onus is therefore on the adminstrator to manually set the cluster to a stable, healthy state before
+      starting <application>repmgrd</application>.
+    </para>
+  </sect2>
+
+ </sect1>
+</appendix>
--- a/doc/appendix-faq.xml
+++ b/doc/appendix-faq.xml
@@ -1,488 +0,0 @@
-<appendix id="appendix-faq" xreflabel="FAQ">
-
-  <title>FAQ (Frequently Asked Questions)</title>
-
-  <indexterm>
-    <primary>FAQ (Frequently Asked Questions)</primary>
-  </indexterm>
-
-  <sect1 id="faq-general" xreflabel="General">
-    <title>General</title>
-
-    <sect2 id="faq-xrepmgr-version-diff" xreflabel="Version differences">
-      <title>What's the difference between the repmgr versions?</title>
-      <para>
-        &repmgr; 4 is a complete rewrite of the previous &repmgr; code base
-        and implements &repmgr; as a PostgreSQL extension. It
-        supports all PostgreSQL versions from 9.3 (although some &repmgr;
-        features are not available for PostgreSQL 9.3 and 9.4).
-      </para>
-      <note>
-        <para>
-          &repmgr; 5 is fundamentally the same code base as &repmgr; 4, but provides
-          support for the revised replication configuration mechanism in PostgreSQL 12.
-        </para>
-        <para>
-          Support for PostgreSQL 9.3 is no longer available from &repmgr; 5.2.
-        </para>
-      </note>
-      <para>
-        &repmgr; 3.x builds on the improved replication facilities added
-        in PostgreSQL 9.3, as well as improved automated failover support
-        via &repmgrd;, and is not compatible with PostgreSQL 9.2
-        and earlier. We recommend upgrading to &repmgr; 4, as the &repmgr; 3.x
-        series is no longer maintained.
-      </para>
-      <para>
-        &repmgr; 2.x supports PostgreSQL 9.0 ~ 9.3. While it is compatible
-        with PostgreSQL 9.3, we recommend using repmgr 4.x. &repmgr; 2.x is
-        no longer maintained.
-      </para>
-      <para>
-        See also <link linkend="install-compatibility-matrix">&repmgr; compatibility matrix</link>
-        and <link linkend="faq-upgrade-repmgr">Should I upgrade &repmgr;?</link>.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-replication-slots-advantage" xreflabel="Advantages of replication slots">
-      <title>What's the advantage of using replication slots?</title>
-      <para>
-        Replication slots, introduced in PostgreSQL 9.4, ensure that the
-        primary server will retain WAL files until they have been consumed
-        by all standby servers. This means standby servers should never
-        fail due to not being able to retrieve required WAL files from the
-        primary.
-      </para>
-      <para>
-        However this does mean that if a standby is no longer connected to the
-        primary, the presence of the replication slot will cause WAL files
-        to be retained indefinitely, and eventually lead to disk space
-        exhaustion.
-      </para>
-
-      <tip>
-        <para>
-          Our recommended configuration is to configure
-          <ulink url="https://www.pgbarman.org/">Barman</ulink> as a fallback
-          source of WAL files, rather than maintain replication slots for
-          each standby. See also: <link linkend="cloning-from-barman-restore-command">Using Barman as a WAL file source</link>.
-        </para>
-      </tip>
-    </sect2>
-
-    <sect2 id="faq-replication-slots-number" xreflabel="Number of replication slots">
-      <title>How many replication slots should I define in <varname>max_replication_slots</varname>?</title>
-      <para>
-        Normally at least same number as the number of standbys which will connect
-        to the node. Note that changes to <varname>max_replication_slots</varname> require a server
-        restart to take effect, and as there is no particular penalty for unused
-        replication slots, setting a higher figure will make adding new nodes
-        easier.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-hash-index" xreflabel="Hash indexes">
-      <title>Does &repmgr; support hash indexes?</title>
-      <para>
-        Before PostgreSQL 10, hash indexes were not WAL logged and are therefore not suitable
-        for use in streaming replication in PostgreSQL 9.6 and earlier. See the
-        <ulink url="https://www.postgresql.org/docs/9.6/sql-createindex.html#AEN80279">PostgreSQL documentation</ulink>
-        for details.
-      </para>
-      <para>
-        From PostgreSQL 10, this restriction has been lifted and hash indexes can be used
-        in a streaming replication cluster.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-upgrades" xreflabel="Upgrading PostgreSQL with repmgr">
-      <title>Can &repmgr; assist with upgrading a PostgreSQL cluster?</title>
-      <para>
-        For <emphasis>minor</emphasis> version upgrades, e.g. from 9.6.7 to 9.6.8, a common
-        approach is to upgrade a standby to the latest version, perform a
-        <link linkend="performing-switchover">switchover</link> promoting it to a primary,
-        then upgrade the former primary.
-      </para>
-      <para>
-        For <emphasis>major</emphasis> version upgrades (e.g. from PostgreSQL 9.6 to PostgreSQL 10),
-        the traditional approach is to "reseed" a cluster by upgrading a single
-        node with <ulink url="https://www.postgresql.org/docs/current/pgupgrade.html">pg_upgrade</ulink>
-        and recloning standbys from this.
-      </para>
-      <para>
-        To minimize downtime during major upgrades from PostgreSQL 9.4 and later,
-        <ulink url="https://www.2ndquadrant.com/en/resources/pglogical/">pglogical</ulink>
-        can be used to set up a parallel cluster using the newer PostgreSQL version,
-        which can be kept in sync with the existing production cluster until the
-        new cluster is ready to be put into production.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-libdir-repmgr-error">
-      <title>What does this error mean: <literal>ERROR: could not access file "$libdir/repmgr"</literal>?</title>
-      <para>
-        It means the &repmgr; extension code is not installed in the
-        PostgreSQL application directory. This typically happens when using PostgreSQL
-        packages provided by a third-party vendor, which often have different
-        filesystem layouts.
-      </para>
-      <para>
-        Either use PostgreSQL packages provided by the community or EnterpriseDB; if this
-        is not possible, contact your vendor for assistance.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-old-packages">
-      <title>How can I obtain old versions of &repmgr; packages?</title>
-      <para>
-        See appendix <xref linkend="packages-old-versions"/> for details.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-required-for-replication">
-      <title>Is &repmgr; required for streaming replication?</title>
-      <para>
-        No.
-      </para>
-      <para>
-        &repmgr; (together with &repmgrd;) assists with
-        <emphasis>managing</emphasis> replication. It does not actually perform replication, which
-        is part of the core PostgreSQL functionality.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-what-if-repmgr-uninstalled">
-      <title>Will replication stop working if &repmgr; is uninstalled?</title>
-      <para>
-        No. See preceding question.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-version-mix">
-      <title>Does it matter if different &repmgr; versions are present in the replication cluster?</title>
-      <para>
-        Yes. If different &quot;major&quot; &repmgr; versions (e.g. 3.3.x and 4.1.x) are present,
-        &repmgr; (in particular &repmgrd;)
-        may not run, or run properly, or in the worst case (if different &repmgrd;
-        versions are running and there are differences in the failover implementation) break
-        your replication cluster.
-      </para>
-      <para>
-        If different &quot;minor&quot; &repmgr; versions (e.g. 4.1.1 and 4.1.6) are installed,
-        &repmgr; will function, but we strongly recommend always running the same version
-        to ensure there are no unexpected surprises, e.g. a newer version behaving slightly
-        differently to the older version.
-      </para>
-      <para>
-        See also <link linkend="faq-upgrade-repmgr">Should I upgrade &repmgr;?</link>.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-upgrade-repmgr">
-      <title>Should I upgrade &repmgr;?</title>
-      <para>
-        Yes.
-      </para>
-      <para>
-        We don't release new versions for fun, you know. Upgrading may require a little effort,
-        but running an older &repmgr; version with bugs which have since been fixed may end up
-        costing you more effort. The same applies to PostgreSQL itself.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-conf-data-directory">
-      <title>Why do I need to specify the data directory location in repmgr.conf?</title>
-      <para>
-        In some circumstances &repmgr; may need to access a PostgreSQL data
-        directory while the PostgreSQL server is not running, e.g. to confirm
-        it shut down cleanly during a <link linkend="performing-switchover">switchover</link>.
-      </para>
-      <para>
-        Additionally, this provides support when using &repmgr; on PostgreSQL 9.6 and
-        earlier, where the <literal>repmgr</literal> user is not a superuser; in that
-        case the <literal>repmgr</literal> user will not be able to access the
-        <literal>data_directory</literal> configuration setting, access to which is restricted
-        to superusers.
-      </para>
-      <para>
-        In PostgreSQL 10 and later, non-superusers can be added to the
-        <ulink url="https://www.postgresql.org/docs/current/default-roles.html">default role</ulink>
-        <option>pg_read_all_settings</option> (or the meta-role <option>pg_monitor</option>)
-        which will enable them to read this setting.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-third-party-packages" xreflabel="Compatibility with third party vendor packages">
-      <title>Are &repmgr; packages compatible with <literal>$third_party_vendor</literal>'s packages?</title>
-      <para>
-        &repmgr; packages provided by EnterpriseDB are compatible with the community-provided PostgreSQL
-        packages and specified software provided by EnterpriseDB.
-      </para>
-      <para>
-        A number of other vendors provide their own versions of PostgreSQL packages, often with different
-        package naming schemes and/or file locations.
-      </para>
-      <para>
-        We cannot guarantee that &repmgr; packages will be compatible with these packages.
-        It may be possible to override package dependencies (e.g. <literal>rpm --nodeps</literal>
-        for CentOS-based systems or <literal>dpkg --force-depends</literal> for Debian-based systems).
-      </para>
-    </sect2>
-  </sect1>
-
-  <sect1 id="faq-repmgr" xreflabel="repmgr">
-    <title><command>repmgr</command></title>
-
-    <sect2 id="faq-register-existing-node" xreflabel="registering an existing node">
-      <title>Can I register an existing PostgreSQL server with repmgr?</title>
-      <para>
-        Yes, any existing PostgreSQL server which is part of the same replication
-        cluster can be registered with &repmgr;. There's no requirement for a
-        standby to have been cloned using &repmgr;.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-clone-other-source" >
-      <title>Can I use a standby not cloned by &repmgr; as a &repmgr; node?</title>
-
-      <para>
-        For a standby which has been manually cloned or recovered from an external
-        backup manager such as Barman, the command
-        <command><link linkend="repmgr-standby-clone">repmgr standby clone --replication-conf-only</link></command>
-        can be used to create the correct replication configuration file for
-        use with &repmgr; (and will create a replication slot if required). Once this has been done,
-        <link linkend="repmgr-standby-register">register the node</link> as usual.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-recovery-conf" >
-      <title>What does &repmgr; write in the replication configuration, and what options can be set there?</title>
-      <para>
-        See section <link linkend="repmgr-standby-clone-recovery-conf">Customising replication configuration</link>.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-failed-primary-standby" xreflabel="Reintegrate a failed primary as a standby">
-      <title>How can a failed primary be re-added as a standby?</title>
-      <para>
-        This is a two-stage process. First, the failed primary's data directory
-        must be re-synced with the current primary; secondly the failed primary
-        needs to be re-registered as a standby.
-      </para>
-      <para>
-        It's possible to use <command>pg_rewind</command> to re-synchronise the existing data
-        directory, which will usually be much
-        faster than re-cloning the server. However <command>pg_rewind</command> can only
-        be used if PostgreSQL either has <varname>wal_log_hints</varname> enabled, or
-        data checksums were enabled when the cluster was initialized.
-      </para>
-      <para>
-        Note that <command>pg_rewind</command> is available as part of the core PostgreSQL
-        distribution from PostgreSQL 9.5, and as a third-party utility for PostgreSQL 9.3 and 9.4.
-      </para>
-      <para>
-        &repmgr; provides the command <command>repmgr node rejoin</command> which can
-        optionally execute <command>pg_rewind</command>; see the <xref linkend="repmgr-node-rejoin"/>
-        documentation for details, in particular the section <xref linkend="repmgr-node-rejoin-pg-rewind"/>.
-      </para>
-      <para>
-        If <command>pg_rewind</command> cannot be used, then the data directory will need
-        to be re-cloned from scratch.
-      </para>
-
-    </sect2>
-
-    <sect2 id="faq-repmgr-check-configuration" xreflabel="Check PostgreSQL configuration">
-      <title>Is there an easy way to check my primary server is correctly configured for use with &repmgr;?</title>
-      <para>
-        Execute <command><link linkend="repmgr-standby-clone">repmgr standby clone</link></command>
-        with the <literal>--dry-run</literal> option; this will report any configuration problems
-        which need to be rectified.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-clone-skip-config-files" xreflabel="">
-      <title>When cloning a standby, how can I get &repmgr; to copy
-        <filename>postgresql.conf</filename> and <filename>pg_hba.conf</filename> from the PostgreSQL configuration
-        directory in <filename>/etc</filename>?</title>
-      <para>
-        Use the command line option <literal>--copy-external-config-files</literal>. For more details
-        see <xref linkend="repmgr-standby-clone-config-file-copying"/>.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-shared-preload-libraries-no-repmgrd" xreflabel="shared_preload_libraries without repmgrd">
-      <title>Do I need to include <literal>shared_preload_libraries = 'repmgr'</literal>
-        in <filename>postgresql.conf</filename> if I'm not using &repmgrd;?</title>
-      <para>
-        No, the <literal>repmgr</literal> shared library is only needed when running &repmgrd;.
-        If you later decide to run &repmgrd;, you just need to add
-        <literal>shared_preload_libraries = 'repmgr'</literal> and restart PostgreSQL.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-permissions" xreflabel="Replication permission problems">
-      <title>I've provided replication permission for the <literal>repmgr</literal> user in <filename>pg_hba.conf</filename>
-        but <command>repmgr</command>/&repmgrd; complains it can't connect to the server... Why?</title>
-      <para>
-        <command>repmgr</command> and &repmgrd; need to be able to connect to the repmgr database
-        with a normal connection to query metadata. The <literal>replication</literal> connection
-        permission is for PostgreSQL's streaming replication (and doesn't  necessarily need to be the <literal>repmgr</literal> user).
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-clone-provide-primary-conninfo" xreflabel="Providing primary connection parameters">
-      <title>When cloning a standby, why do I need to provide the connection parameters
-        for the primary server on the command line, not in the configuration file?</title>
-      <para>
-        Cloning a standby is a one-time action; the role of the server being cloned
-        from could change, so fixing it in the configuration file would create
-        confusion. If &repmgr; needs to establish a connection to the primary
-        server, it can retrieve this from the <literal>repmgr.nodes</literal> table on the local
-        node, and if necessary scan the replication cluster until it locates the active primary.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-clone-waldir-xlogdir" xreflabel="Providing a custom WAL directory">
-      <title>When cloning a standby, how do I ensure the WAL files are placed in a custom directory?</title>
-      <para>
-        Provide the option <literal>--waldir</literal>  (<literal>--xlogdir</literal> in PostgreSQL 9.6
-        and earlier) with the absolute path to the WAL directory in <varname>pg_basebackup_options</varname>.
-        For more details see <xref linkend="cloning-advanced-pg-basebackup-options"/>.
-      </para>
-      <para>
-        In &repmgr; 5.2 and later, this setting will also be honoured when cloning from Barman.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-events-no-fkey" xreflabel="No foreign key on node_id in repmgr.events">
-      <title>Why is there no foreign key on the <literal>node_id</literal> column in the <literal>repmgr.events</literal>
-        table?</title>
-      <para>
-        Under some circumstances event notifications can be generated for servers
-        which have not yet been registered; it's also useful to retain a record
-        of events which includes servers removed from the replication cluster
-        which no longer have an entry in the <literal>repmgr.nodes</literal> table.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-recovery-conf-quoted-values" xreflabel="Quoted values in replication.conf">
-      <title>Why are some values in <filename>recovery.conf</filename> (PostgreSQL 11 and earlier) surrounded by pairs of single quotes?</title>
-      <para>
-        This is to ensure that user-supplied values which are written as parameter values in <filename>recovery.conf</filename>
-        are escaped correctly and do not cause errors when the file is parsed.
-      </para>
-      <para>
-        The escaping is performed by an internal PostgreSQL routine, which leaves strings consisting
-        of digits and alphabetical characters only as-is, but wraps everything else in pairs of single quotes,
-        even if the string does not contain any characters which need escaping.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgr-exclude-metadata-from-dump" xreflabel="Excluding repmgr metadata from pg_dump output">
-      <title>How can I exclude &repmgr; metadata from <application>pg_dump</application> output?</title>
-      <para>
-        Beginning with &repmgr; 5.2, the metadata tables associated with the &repmgr; extension
-        (<literal>repmgr.nodes</literal>, <literal>repmgr.events</literal> and <literal>repmgr.monitoring_history</literal>)
-        have been marked as dumpable as they contain configuration and user-generated data.
-      </para>
-      <para>
-        To exclude these from <application>pg_dump</application> output, add the flag <option>--exclude-schema=repmgr</option>.
-      </para>
-      <para>
-        To exclude individual &repmgr; metadata tables from <application>pg_dump</application> output, add the flag
-        e.g. <option>--exclude-table=repmgr.monitoring_history</option>. This flag can be provided multiple times
-        to exclude individual tables,
-      </para>
-    </sect2>
-
-  </sect1>
-
-  <sect1 id="faq-repmgrd" xreflabel="repmgrd">
-    <title>&repmgrd;</title>
-
-
-    <sect2 id="faq-repmgrd-prevent-promotion" xreflabel="Prevent standby from being promoted to primary">
-      <title>How can I prevent a node from ever being promoted to primary?</title>
-      <para>
-        In <filename>repmgr.conf</filename>, set its priority to a value of <literal>0</literal>; apply the changed setting with
-        <command><link linkend="repmgr-standby-register">repmgr standby register --force</link></command>.
-      </para>
-      <para>
-        Additionally, if <varname>failover</varname> is set to <literal>manual</literal>, the node will never
-        be considered as a promotion candidate.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgrd-delayed-standby" xreflabel="Delayed standby support">
-      <title>Does &repmgrd; support delayed standbys?</title>
-      <para>
-        &repmgrd; can monitor delayed standbys - those set up with
-        <varname>recovery_min_apply_delay</varname> set to a non-zero value
-        in the replication configuration. However &repmgrd; does not currently
-        consider this setting, and therefore may not be able to properly evaluate
-        the node as a promotion candidate.
-      </para>
-      <para>
-        We recommend that delayed standbys are explicitly excluded from promotion
-        by setting <varname>priority</varname> to <literal>0</literal> in
-        <filename>repmgr.conf</filename>.
-      </para>
-      <para>
-        Note that after registering a delayed standby, &repmgrd; will only start
-        once the metadata added in the primary node has been replicated.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgrd-logfile-rotate" xreflabel="repmgrd logfile rotation">
-      <title>How can I get &repmgrd; to rotate its logfile?</title>
-      <para>
-        Configure your system's <literal>logrotate</literal> service to do this; see <xref linkend="repmgrd-log-rotation"/>.
-      </para>
-
-    </sect2>
-
-    <sect2 id="faq-repmgrd-recloned-no-start" xreflabel="repmgrd not restarting after node cloned">
-      <title>I've recloned a failed primary as a standby, but &repmgrd; refuses to start?</title>
-      <para>
-        Check you registered the standby after recloning. If unregistered, the standby
-        cannot be considered as a promotion candidate even if <varname>failover</varname> is set to
-        <literal>automatic</literal>, which is probably not what you want. &repmgrd; will start if
-        <varname>failover</varname> is set to <literal>manual</literal> so the node's replication status can still
-        be monitored, if desired.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgrd-pg-bindir" xreflabel="repmgrd does not apply pg_bindir to promote_command or follow_command">
-      <title>
-        &repmgrd; ignores pg_bindir when executing <varname>promote_command</varname> or <varname>follow_command</varname>
-      </title>
-      <para>
-        <varname>promote_command</varname> or <varname>follow_command</varname> can be user-defined scripts,
-        so &repmgr; will not apply <option>pg_bindir</option> even if executing &repmgr;. Always provide the full
-        path; see <xref linkend="repmgrd-automatic-failover-configuration"/> for more details.
-      </para>
-    </sect2>
-
-    <sect2 id="faq-repmgrd-startup-no-upstream" xreflabel="repmgrd does not start if upstream node is not running">
-      <title>
-        &repmgrd; aborts startup with the error "<literal>upstream node must be running before repmgrd can start</literal>"
-      </title>
-      <para>
-        &repmgrd; does this to avoid starting up on a replication cluster
-        which is not in a healthy state. If the upstream is unavailable, &repmgrd;
-        may initiate a failover immediately after starting up, which could have unintended side-effects,
-        particularly if &repmgrd; is not running on other nodes.
-      </para>
-      <para>
-        In particular, it's possible that the node's local copy of the <literal>repmgr.nodes</literal> copy
-        is out-of-date, which may lead to incorrect failover behaviour.
-      </para>
-      <para>
-        The onus is therefore on the administrator to manually set the cluster to a stable, healthy state before
-        starting &repmgrd;.
-      </para>
-    </sect2>
-
-  </sect1>
-</appendix>
--- a/doc/appendix-packages.sgml
+++ b/doc/appendix-packages.sgml
@@ -1,11 +1,9 @@
 <appendix id="appendix-packages" xreflabel="Package details">
-
-  <title>&repmgr; package details</title>
-
  <indexterm>
    <primary>packages</primary>
  </indexterm>

+  <title>&repmgr; package details</title>
  <para>
    This section provides technical details about various &repmgr; binary
    packages, such as location of the installed binaries and
@@ -50,18 +48,19 @@
      <title>CentOS repositories</title>

      <para>
-        &repmgr; packages are available from the public EDB repository, and also the
-        PostgreSQL community repository. The EDB repository is updated immediately
-        after each &repmgr; release.
+        &repmgr; packages are available from the public 2ndQuadrant repository, and also the
+        PostgreSQL community repository. The 2ndQuadrant repository is updated immediately
+        after each
+        &repmgr; release.
      </para>

      <table id="centos-2ndquadrant-repository">
-        <title>EDB public repository</title>
+        <title>2ndQuadrant public repository</title>
        <tgroup cols="2">
          <tbody>
            <row>
              <entry>Repository URL:</entry>
-              <entry><ulink url="https://dl.enterprisedb.com/">https://dl.enterprisedb.com/</ulink></entry>
+              <entry><ulink url="https://dl.2ndquadrant.com/">https://dl.2ndquadrant.com/</ulink></entry>
            </row>
            <row>
              <entry>Repository documentation:</entry>
@@ -121,7 +120,7 @@

     <row>
      <entry>Package name example:</entry>
-      <entry><filename>repmgr11-4.4.0-1.rhel7.x86_64</filename></entry>
+      <entry><filename>repmgr10-4.0.4-1.rhel7.x86_64</filename></entry>
     </row>

     <row>
@@ -131,12 +130,12 @@

     <row>
      <entry>Installation command:</entry>
-      <entry><literal>yum install repmgr11</literal></entry>
+      <entry><literal>yum install repmgr10</literal></entry>
     </row>

     <row>
      <entry>Binary location:</entry>
-      <entry><filename>/usr/pgsql-11/bin</filename></entry>
+      <entry><filename>/usr/pgsql-10/bin</filename></entry>
     </row>

     <row>
@@ -146,22 +145,22 @@

     <row>
      <entry>Configuration file location:</entry>
-      <entry><filename>/etc/repmgr/11/repmgr.conf</filename></entry>
+      <entry><filename>/etc/repmgr/10/repmgr.conf</filename></entry>
     </row>

     <row>
      <entry>Data directory:</entry>
-      <entry><filename>/var/lib/pgsql/11/data</filename></entry>
+      <entry><filename>/var/lib/pgsql/10/data</filename></entry>
     </row>

     <row>
      <entry>repmgrd service command:</entry>
-      <entry><command>systemctl [start|stop|restart|reload] repmgr11</command></entry>
+      <entry><command>systemctl [start|stop|restart|reload] repmgr10</command></entry>
     </row>

     <row>
      <entry>repmgrd service file location:</entry>
-      <entry><filename>/usr/lib/systemd/system/repmgr11.service</filename></entry>
+      <entry><filename>/usr/lib/systemd/system/repmgr10.service</filename></entry>
     </row>

     <row>
@@ -252,22 +251,28 @@
    </indexterm>

    <para>
-      &repmgr; <literal>.deb</literal> packages are provided by EDB as well as the
+      &repmgr; <literal>.deb</literal> packages are provided via the
      PostgreSQL Community APT repository, and are available for each community-supported
      PostgreSQL version, currently supported Debian releases, and currently supported
      Ubuntu LTS releases.
    </para>

    <sect2 id="packages-apt-repository">
-      <title>APT repositories</title>
+      <title>APT repository</title>
+
+      <para>
+        &repmgr; packages are available from the  PostgreSQL Community APT repository,
+        which is updated immediately after each &repmgr; release.
+      </para>
+

      <table id="apt-2ndquadrant-repository">
-        <title>EDB public repository</title>
+        <title>2ndQuadrant public repository</title>
        <tgroup cols="2">
          <tbody>
            <row>
              <entry>Repository URL:</entry>
-              <entry><ulink url="https://dl.enterprisedb.com/">https://dl.enterprisedb.com/</ulink></entry>
+              <entry><ulink url="https://dl.2ndquadrant.com/">https://dl.2ndquadrant.com/</ulink></entry>
            </row>
            <row>
              <entry>Repository documentation:</entry>
@@ -284,7 +289,7 @@
          <tbody>
            <row>
              <entry>Repository URL:</entry>
-              <entry><ulink url="https://apt.postgresql.org/">https://apt.postgresql.org/</ulink></entry>
+              <entry><ulink url="http://apt.postgresql.org/">http://apt.postgresql.org/</ulink></entry>
            </row>
            <row>
              <entry>Repository documentation:</entry>
@@ -304,8 +309,8 @@
        version number for your installation.
      </para>
      <para>
-        See also <xref linkend="repmgrd-configuration-debian-ubuntu"/> for some specifics related
-        to configuring the &repmgrd; daemon.
+        See also <xref linkend="repmgrd-configuration-debian-ubuntu"> for some specifics related
+        to configuring the <application>repmgrd</application> daemon.
      </para>

      <table id="debian-9-packages">
@@ -316,7 +321,7 @@

            <row>
              <entry>Package name example:</entry>
-              <entry><filename>postgresql-11-repmgr</filename></entry>
+              <entry><filename>postgresql-10-repmgr</filename></entry>
            </row>

            <row>
@@ -326,12 +331,12 @@

            <row>
              <entry>Installation command:</entry>
-              <entry><literal>apt-get install postgresql-11-repmgr</literal></entry>
+              <entry><literal>apt-get install postgresql-10-repmgr</literal></entry>
            </row>

            <row>
              <entry>Binary location:</entry>
-              <entry><filename>/usr/lib/postgresql/11/bin</filename></entry>
+              <entry><filename>/usr/lib/postgresql/10/bin</filename></entry>
            </row>

            <row>
@@ -346,12 +351,12 @@

            <row>
              <entry>Data directory:</entry>
-              <entry><filename>/var/lib/postgresql/11/main</filename></entry>
+              <entry><filename>/var/lib/postgresql/10/main</filename></entry>
            </row>

            <row>
              <entry>PostgreSQL service command:</entry>
-              <entry><command>systemctl [start|stop|restart|reload] postgresql@11-main</command></entry>
+              <entry><command>systemctl [start|stop|restart|reload] postgresql@10-main</command></entry>

            </row>

@@ -375,11 +380,11 @@
      </table>
      <note>
        <para>
-          When using Debian packages, instead of using the <application>systemd</application> service
-          command directly,  it's recommended to execute <command>pg_ctlcluster</command>
-          (as <literal>root</literal>, either directly or via <command>sudo</command>), e.g.:
+          Instead of using the <application>systemd</application> service command directly,
+          it's recommended to execute <command>pg_ctlcluster</command> (as <literal>root</literal>,
+          either directly or via <command>sudo</command>), e.g.:
          <programlisting>
-            <command>pg_ctlcluster 11 main [start|stop|restart|reload]</command></programlisting>
+            <command>pg_ctlcluster 10 main [start|stop|restart|reload]</command></programlisting>
        </para>
        <para>
          For pre-<application>systemd</application> systems, <command>pg_ctlcluster</command>
@@ -397,11 +402,11 @@
    </indexterm>
    <indexterm>
      <primary>packages</primary>
-      <secondary>snapshots</secondary>
+      <secondary>snaphots</secondary>
    </indexterm>

    <para>
-      For testing new features and bug fixes, from time to time EDB provides
+      For testing new features and bug fixes, from time to time 2ndQuadrant provides
      so-called &quot;snapshot packages&quot; via its public repository. These packages
      are built from the &repmgr; source at a particular point in time, and are not formal
      releases.
@@ -413,22 +418,22 @@
      </para>
    </note>
    <para>
-      To install a snapshot package, it's necessary to install the EDB public snapshot repository,
-      following the instructions here: <ulink url="https://dl.enterprisedb.com/default/release/site/">https://dl.enterprisedb.com/default/release/site/</ulink> but replace <literal>release</literal> with <literal>snapshot</literal>
+      To install a snapshot package, it's necessary to install the 2ndQuadrant public snapshot repository,
+      following the instructions here: <ulink url="https://dl.2ndquadrant.com/default/release/site/">https://dl.2ndquadrant.com/default/release/site/</ulink> but replace <literal>release</literal> with <literal>snapshot</literal>
      in the appropriate URL.
    </para>
    <para>
      For example, to install the snapshot RPM repository for PostgreSQL 9.6, execute (as <literal>root</literal>):
      <programlisting>
-curl https://dl.enterprisedb.com/default/snapshot/get/9.6/rpm | bash</programlisting>
+curl https://dl.2ndquadrant.com/default/snapshot/get/9.6/rpm | bash</programlisting>

      or as a normal user with root sudo access:
      <programlisting>
-curl https://dl.enterprisedb.com/default/snapshot/get/9.6/rpm | sudo bash</programlisting>
+curl https://dl.2ndquadrant.com/default/snapshot/get/9.6/rpm | sudo bash</programlisting>
    </para>
    <para>
      Alternatively you can browse the repository here:
-      <ulink url="https://dl.enterprisedb.com/default/snapshot/browse/">https://dl.enterprisedb.com/default/snapshot/browse/</ulink>.
+      <ulink url="https://dl.2ndquadrant.com/default/snapshot/browse/">https://dl.2ndquadrant.com/default/snapshot/browse/</ulink>.
    </para>
    <para>
      Once the repository is installed, installing or updating &repmgr; will result in the latest snapshot
@@ -438,7 +443,7 @@ curl https://dl.enterprisedb.com/default/snapshot/get/9.6/rpm | sudo bash</progr
      The package name will be formatted like this:
      <programlisting>
 repmgr96-4.1.1-0.0git320.g5113ab0.1.el7.x86_64.rpm</programlisting>
-      containing the snapshot build number (here: <literal>320</literal>) and the hash
+      containg the snapshot build number (here: <literal>320</literal>) and the hash
      of the <application>git</application> commit it was built from (here: <literal>g5113ab0</literal>).
    </para>

@@ -470,18 +475,40 @@ repmgr96-4.1.1-0.0git320.g5113ab0.1.el7.x86_64.rpm</programlisting>
      <title>Debian/Ubuntu</title>
      <para>
        An archive of old packages (<literal>3.3.2</literal> and later) for Debian/Ubuntu-based systems is available here:
-        <ulink url="https://apt-archive.postgresql.org/">https://apt-archive.postgresql.org/</ulink>
+        <ulink url="http://atalia.postgresql.org/morgue/r/repmgr/">http://atalia.postgresql.org/morgue/r/repmgr/</ulink>
      </para>
    </sect2>

    <sect2 id="packages-old-versions-rhel-centos" xreflabel="old RHEL/CentOS package versions">
      <title>RHEL/CentOS</title>
+      <para>
+        Old RPM packages (<literal>3.2</literal> and later) can be retrieved from the
+        (deprecated) 2ndQuadrant repository at
+        <ulink url="http://packages.2ndquadrant.com/">http://packages.2ndquadrant.com/</ulink>
+        by installing the appropriate repository RPM:
+      </para>
+
+      <itemizedlist spacing="compact" mark="bullet">
+
+        <listitem>
+          <simpara>
+            <ulink url="http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-fedora-1.0-1.noarch.rpm">http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-fedora-1.0-1.noarch.rpm</ulink>
+          </simpara>
+        </listitem>
+
+        <listitem>
+          <simpara>
+            <ulink url="http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm">http://packages.2ndquadrant.com/repmgr/yum-repo-rpms/repmgr-rhel-1.0-1.noarch.rpm</ulink>
+          </simpara>
+        </listitem>
+
+      </itemizedlist>

      <para>
        Old versions can be located with e.g.:
        <programlisting>
          yum --showduplicates list repmgr96</programlisting>
-        (substitute the appropriate package name; see <xref linkend="packages-centos"/>) and installed with:
+        (substitute the appropriate package name; see <xref linkend="packages-centos">) and installed with:
        <programlisting>
          yum install {package_name}-{version}</programlisting>
        where <literal>{package_name}</literal> is the base package name (e.g. <literal>repmgr96</literal>)
@@ -519,13 +546,13 @@ repmgr96-4.1.1-0.0git320.g5113ab0.1.el7.x86_64.rpm</programlisting>
 		char		package_conf_file[MAXPGPATH] = "";</programlisting>
        </para>
        <para>
-          See also: <xref linkend="configuration-file"/>
+          See also: <xref linkend="configuration-file">
        </para>
      </listitem>

      <listitem>
        <para>
-          PID file location: the default &repmgrd; PID file
+          PID file location: the default <application>repmgrd</application> PID file
          location can be hard-coded by patching <varname>package_pid_file</varname>
          in <filename>repmgrd.c</filename>:
          <programlisting>
@@ -533,7 +560,7 @@ repmgr96-4.1.1-0.0git320.g5113ab0.1.el7.x86_64.rpm</programlisting>
 		char		package_pid_file[MAXPGPATH] = "";</programlisting>
        </para>
        <para>
-          See also: <xref linkend="repmgrd-pid-file"/>
+          See also: <xref linkend="repmgrd-pid-file">
        </para>
      </listitem>

--- a/doc/appendix-release-notes.sgml
+++ b/doc/appendix-release-notes.sgml
--- a/doc/appendix-release-notes.xml
+++ b/doc/appendix-release-notes.xml
--- a/doc/appendix-signatures.sgml
+++ b/doc/appendix-signatures.sgml
--- a/doc/appendix-support.sgml
+++ b/doc/appendix-support.sgml
@@ -1,26 +1,24 @@
 <appendix id="appendix-support" xreflabel="repmgr support">
-
-  <title>&repmgr; support</title>
-
  <indexterm>
    <primary>support</primary>
  </indexterm>

+  <title>&repmgr; support</title>
  <para>
-    <ulink url="https://www.enterprisedb.com/">EDB</ulink> provides 24x7
+    <ulink url="https://2ndquadrant.com/">2ndQuadrant</ulink> provides 24x7
    production support for &repmgr; and other PostgreSQL
    products, including configuration assistance, installation
    verification and training for running a robust replication cluster.
  </para>
  <para>
-    For further details see: <ulink url="https://www.enterprisedb.com/support/postgresql-support-overview-get-the-most-out-of-postgresql">Support Center</ulink>
+    For further details see: <ulink url="https://2ndquadrant.com/en/support/">https://2ndquadrant.com/en/support/</ulink>
  </para>

  <para>
    A mailing list/forum is provided via Google groups to discuss contributions or issues: <ulink url="https://groups.google.com/group/repmgr">https://groups.google.com/group/repmgr</ulink>.
  </para>
  <para>
-    Please report bugs and other issues to: <ulink url="https://github.com/EnterpriseDB/repmgr">https://github.com/EnterpriseDB/repmgr</ulink>.
+    Please report bugs and other issues to: <ulink url="https://github.com/2ndQuadrant/repmgr">https://github.com/2ndQuadrant/repmgr</ulink>.
  </para>

  <important>
@@ -30,25 +28,18 @@
  </important>

  <sect1 id="appendix-support-reporting-issues" xreflabel="Reportins Issues">
-    <title>Reporting Issues</title>
-
    <indexterm>
      <primary>support</primary>
      <secondary>reporting issues</secondary>
    </indexterm>

+    <title>Reporting Issues</title>

    <para>
      When asking questions or reporting issues, it is extremely helpful if the following information is included:

    <itemizedlist spacing="compact" mark="bullet">

-     <listitem>
-      <simpara>
-        PostgreSQL version
-      </simpara>
-     </listitem>
-
     <listitem>
      <simpara>
        &repmgr; version
@@ -57,14 +48,14 @@

     <listitem>
      <simpara>
-        How was &repmgr; installed? From source? From packages? If
+        How was &repmgr installed? From source? From packages? If
        so from which repository?
      </simpara>
     </listitem>

     <listitem>
      <simpara>
-        <filename>repmgr.conf</filename> files (suitably anonymized if necessary)
+        <filename>repmpgr.conf</filename> files (suitably anonymized if necessary)
      </simpara>
     </listitem>

@@ -74,18 +65,9 @@
      </simpara>
     </listitem>

-
     <listitem>
      <simpara>
-        PostgreSQL 11 and earlier: contents of the <filename>recovery.conf</filename> file
-        (suitably anonymized if necessary).
-      </simpara>
-     </listitem>
-     <listitem>
-      <simpara>
-        PostgreSQL 12 and later: contents of the <filename>postgresql.auto.conf</filename> file
-        (suitably anonymized if necessary), and whether or not the PostgreSQL data directory
-        contains the files <filename>standby.signal</filename> and/or <filename>recovery.signal</filename>.
+        PostgreSQL version
      </simpara>
     </listitem>

@@ -98,15 +80,15 @@
      the maximum level of logging output.
    </para>
    <para>
-      If issues are encountered with &repmgrd;,
+      If issues are encountered with <application>repmgrd</application>,
      please provide relevant extracts from the &repmgr; log files
      and if possible the PostgreSQL log itself. Please ensure these
      logs do not contain any confidential data.
    </para>
    <para>
      In all cases it is <emphasis>extremely</emphasis> useful to receive
-      as much detail as possible on how to reliably reproduce
-      an issue.
+      information on how to reliably reproduce an issue with as much detail as
+      possible.
    </para>

  </sect1>
--- a/doc/bdr-failover.md
+++ b/doc/bdr-failover.md
@@ -0,0 +1,8 @@
+BDR failover with repmgrd
+=========================
+
+This document has been integrated into the main `repmgr` documentation
+and is now located here:
+
+> [BDR failover with repmgrd](https://repmgr.org/docs/current/repmgrd-bdr.html)
+
--- a/doc/cloning-standbys.sgml
+++ b/doc/cloning-standbys.sgml
@@ -2,8 +2,6 @@
 <title>Cloning standbys</title>

 <sect1 id="cloning-from-barman" xreflabel="Cloning from Barman">
-   <title>Cloning a standby from Barman</title>
-
   <indexterm>
    <primary>cloning</primary>
    <secondary>from Barman</secondary>
@@ -13,9 +11,10 @@
    <secondary>cloning a standby</secondary>
   </indexterm>

+   <title>Cloning a standby from Barman</title>
   <para>
-    <xref linkend="repmgr-standby-clone"/> can use
-    <ulink url="https://www.enterprisedb.com/">EDB</ulink>'s
+    <xref linkend="repmgr-standby-clone"> can use
+    <ulink url="https://www.2ndquadrant.com/">2ndQuadrant</ulink>'s
    <ulink url="https://www.pgbarman.org/">Barman</ulink> application
    to clone a standby (and also as a fallback source for WAL files).
   </para>
@@ -46,32 +45,12 @@
      <para>
       WAL management on the primary becomes much easier as there's no need
       to use replication slots, and <varname>wal_keep_segments</varname>
-       (PostgreSQL 13 and later: <varname>wal_keep_size</varname>)
       does not need to be set.
     </para>
    </listitem>
   </itemizedlist>
   </para>

-
-   <note>
-    <para>
-      Currently &repmgr;'s support for cloning from Barman is implemented by using
-      <productname>rsync</productname> to clone from the Barman server.
-    </para>
-    <para>
-      It is therefore not able to make use of Barman's parallel restore facility, which
-      is executed on the Barman server and clones to the target server.
-    </para>
-    <para>
-      Barman's parallel restore facility can be used by executing it manually on
-      the Barman server and configuring replication on the resulting cloned
-      standby using
-      <command><link linkend="repmgr-standby-clone">repmgr standby clone --replication-conf-only</link></command>.
-    </para>
-   </note>
-
-
  <sect2 id="cloning-from-barman-prerequisites">
   <title>Prerequisites for cloning from Barman</title>
   <para>
@@ -80,7 +59,8 @@
   <itemizedlist spacing="compact" mark="bullet">
     <listitem>
      <para>
-        the Barman catalogue must include at least one valid backup for this server;
+        the <varname>barman_server</varname> setting in <filename>repmgr.conf</filename> is the same as the
+        server configured in Barman;
      </para>
     </listitem>
     <listitem>
@@ -91,90 +71,19 @@
     </listitem>
     <listitem>
      <para>
-        the <varname>barman_server</varname> setting in <filename>repmgr.conf</filename> is the same as the
-        server configured in Barman.
+        the <varname>restore_command</varname> setting in <filename>repmgr.conf</filename> is configured to
+        use a copy of the <command>barman-wal-restore</command> script shipped with the
+        <literal>barman-cli</literal> package (see section <xref linkend="cloning-from-barman-restore-command">
+        below).
+      </para>
+     </listitem>
+     <listitem>
+      <para>
+        the Barman catalogue includes at least one valid backup for this  server.
      </para>
     </listitem>
-
   </itemizedlist>
   </para>
-
-   <para>
-     For example, assuming Barman is located on the host &quot;<literal>barmansrv</literal>&quot;
-     under the &quot;<literal>barman</literal>&quot; user account,
-     <filename>repmgr.conf</filename> should contain the following entries:
-    <programlisting>
-    barman_host='barman@barmansrv'
-    barman_server='pg'</programlisting>
-   </para>
-   <para>
-     Here <literal>pg</literal> corresponds to a section in Barman's configuration file for a specific
-     server backup configuration, which would look something like:
-     <programlisting>
-[pg]
-description = "Main cluster"
-...
-     </programlisting>
-   </para>
-   <para>
-     More details on Barman configuration can be found in the
-     <ulink url="https://docs.pgbarman.org/">Barman documentation</ulink>'s
-     <ulink url="https://docs.pgbarman.org/#configuration">configuration section</ulink>.
-   </para>
-   <note>
-    <para>
-     To use a non-default Barman configuration file on the Barman server,
-     specify this in <filename>repmgr.conf</filename> with <filename>barman_config</filename>:
-     <programlisting>
-      barman_config='/path/to/barman.conf'</programlisting>
-    </para>
-   </note>
-
-
-   <para>
-     We also recommend configuring the <varname>restore_command</varname> setting in <filename>repmgr.conf</filename>
-     to use the <command>barman-wal-restore</command> script
-     (see section <xref linkend="cloning-from-barman-restore-command"/> below).
-   </para>
-
-
-   <tip>
-    <simpara>
-      If you have a non-default SSH configuration on the Barman
-      server, e.g. using a port other than 22, then you can set those
-      parameters in a dedicated Host section in <filename>~/.ssh/config</filename>
-      corresponding to the value of <varname>barman_host</varname> in
-      <filename>repmgr.conf</filename>. See the <literal>Host</literal>
-      section in <command>man 5 ssh_config</command> for more details.
-    </simpara>
-   </tip>
-   <para>
-     If you wish to place WAL files in a location outside the main
-     PostgreSQL data directory, set <option>--waldir</option>
-     (PostgreSQL 9.6 and earlier: <option>--xlogdir</option>) in
-     <option>pg_basebackup_options</option> to the target directory
-     (must be an absolute filepath). &repmgr; will create and
-     symlink to this directory in exactly the same way
-     <application>pg_basebackup</application> would.
-   </para>
-   <para>
-    It's now possible to clone a standby from Barman, e.g.:
-    <programlisting>
-    $ repmgr -f /etc/repmgr.conf -h node1 -U repmgr -d repmgr standby clone
-    NOTICE: destination directory "/var/lib/postgresql/data" provided
-    INFO: connecting to Barman server to verify backup for "test_cluster"
-    INFO: checking and correcting permissions on existing directory "/var/lib/postgresql/data"
-    INFO: creating directory "/var/lib/postgresql/data/repmgr"...
-    INFO: connecting to Barman server to fetch server parameters
-    INFO: connecting to source node
-    DETAIL: current installation size is 30 MB
-    NOTICE: retrieving backup from Barman...
-    (...)
-    NOTICE: standby clone (from Barman) complete
-    NOTICE: you can now start your PostgreSQL server
-    HINT: for example: pg_ctl -D /var/lib/postgresql/data start</programlisting>
-   </para>
-
   <note>
    <simpara>
     Barman support is automatically enabled if <varname>barman_server</varname>
@@ -184,52 +93,86 @@ description = "Main cluster"
     command line option.
    </simpara>
   </note>
+   <tip>
+    <simpara>
+      If you have a non-default SSH configuration on the Barman
+      server, e.g. using a port other than 22, then you can set those
+      parameters in a dedicated Host section in <filename>~/.ssh/config</filename>
+      corresponding to the value of<varname>barman_host</varname> in
+      <filename>repmgr.conf</filename>. See the <literal>Host</literal>
+      section in <command>man 5 ssh_config</command> for more details.
+    </simpara>
+   </tip>
+   <para>
+    It's now possible to clone a standby from Barman, e.g.:
+    <programlisting>
+    NOTICE: using configuration file "/etc/repmgr.conf"
+    NOTICE: destination directory "/var/lib/postgresql/data" provided
+    INFO: connecting to Barman server to verify backup for test_cluster
+    INFO: checking and correcting permissions on existing directory "/var/lib/postgresql/data"
+    INFO: creating directory "/var/lib/postgresql/data/repmgr"...
+    INFO: connecting to Barman server to fetch server parameters
+    INFO: connecting to upstream node
+    INFO: connected to source node, checking its state
+    INFO: successfully connected to source node
+    DETAIL: current installation size is 29 MB
+    NOTICE: retrieving backup from Barman...
+    receiving file list ...
+    (...)
+    NOTICE: standby clone (from Barman) complete
+    NOTICE: you can now start your PostgreSQL server
+    HINT: for example: pg_ctl -D /var/lib/postgresql/data start</programlisting>

+   </para>
  </sect2>
  <sect2 id="cloning-from-barman-restore-command" xreflabel="Using Barman as a WAL file source">
-   <title>Using Barman as a WAL file source</title>
-
-   <indexterm>
+  <indexterm>
    <primary>Barman</primary>
    <secondary>fetching archived WAL</secondary>
   </indexterm>

+   <title>Using Barman as a WAL file source</title>
   <para>
    As a fallback in case streaming replication is interrupted, PostgreSQL can optionally
    retrieve WAL files from an archive, such as that provided by Barman. This is done by
-    setting <varname>restore_command</varname> in the replication configuration to
+    setting <varname>restore_command</varname> in <filename>recovery.conf</filename> to
    a valid shell command which can retrieve a specified WAL file from the archive.
   </para>
   <para>
     <command>barman-wal-restore</command> is a Python script provided as part of the <literal>barman-cli</literal>
-     package (Barman 2.0 ~ 2.7) or as part of the core Barman distribution (Barman 2.8 and later).
+     package (Barman 2.0 and later; for Barman 1.x the script is provided separately as
+     <command>barman-wal-restore.py</command>) which performs this function for Barman.
   </para>
   <para>
-    To use <command>barman-wal-restore</command> with &repmgr;,
-    assuming Barman is located on the host &quot;<literal>barmansrv</literal>&quot;
-    under the &quot;<literal>barman</literal>&quot; user account,
+    To use <command>barman-wal-restore</command> with &repmgr;
+    and assuming Barman is located on the <literal>barmansrv</literal> host
    and that <command>barman-wal-restore</command> is located as an executable at
    <filename>/usr/bin/barman-wal-restore</filename>,
    <filename>repmgr.conf</filename> should include the following lines:
    <programlisting>
-    barman_host='barman@barmansrv'
-    barman_server='pg'
-    restore_command='/usr/bin/barman-wal-restore barmansrv pg %f %p'</programlisting>
+    barman_host=barmansrv
+    barman_server=somedb
+    restore_command=/usr/bin/barman-wal-restore barmansrv somedb %f %p</programlisting>
   </para>
   <note>
    <simpara>
      <command>barman-wal-restore</command> supports command line switches to
-      control parallelism (<literal>--parallel=N</literal>) and compression
-      (<literal>--bzip2</literal>, <literal>--gzip</literal>).
+      control parallelism (<literal>--parallel=N</literal>) and compression (
+      <literal>--bzip2</literal>, <literal>--gzip</literal>).
    </simpara>
   </note>
-
+   <note>
+    <para>
+     To use a non-default Barman configuration file on the Barman server,
+     specify this in <filename>repmgr.conf</filename> with <filename>barman_config</filename>:
+     <programlisting>
+      barman_config=/path/to/barman.conf</programlisting>
+    </para>
+   </note>
  </sect2>
 </sect1>

- <sect1 id="cloning-replication-slots" xreflabel="Cloning and replication slots">
-   <title>Cloning and replication slots</title>
-
+<sect1 id="cloning-replication-slots" xreflabel="Cloning and replication slots">
   <indexterm>
     <primary>cloning</primary>
     <secondary>replication slots</secondary>
@@ -239,13 +182,13 @@ description = "Main cluster"
     <primary>replication slots</primary>
     <secondary>cloning</secondary>
   </indexterm>
+   <title>Cloning and replication slots</title>
   <para>
    Replication slots were introduced with PostgreSQL 9.4 and are designed to ensure
    that any standby connected to the primary using a replication slot will always
    be able to retrieve the required WAL files. This removes the need to manually
    manage WAL file retention by estimating the number of WAL files that need to
-    be maintained on the primary using <varname>wal_keep_segments</varname>
-    (PostgreSQL 13 and later: <varname>wal_keep_size</varname>).
+    be maintained on the primary using <varname>wal_keep_segments</varname>.
    Do however be aware that if a standby is disconnected, WAL will continue to
    accumulate on the primary until either the standby reconnects or the replication
    slot is dropped.
@@ -299,27 +242,25 @@ description = "Main cluster"
     build up indefinitely, possibly leading to server failure.
    </simpara>
    <simpara>
-     As an alternative we recommend using EDB's <ulink url="https://www.pgbarman.org/">Barman</ulink>,
+     As an alternative we recommend using 2ndQuadrant's <ulink url="https://www.pgbarman.org/">Barman</ulink>,
     which offloads WAL management to a separate server, removing the requirement to use a replication
-     slot for each individual standby to reserve WAL. See section <xref linkend="cloning-from-barman"/>
+     slot for each individual standby to reserve WAL. See section <xref linkend="cloning-from-barman">
     for more details on using &repmgr; together with Barman.
    </simpara>
   </tip>
 </sect1>

 <sect1 id="cloning-cascading" xreflabel="Cloning and cascading replication">
-   <title>Cloning and cascading replication</title>
-
   <indexterm>
     <primary>cloning</primary>
     <secondary>cascading replication</secondary>
   </indexterm>
-
+   <title>Cloning and cascading replication</title>
   <para>
    Cascading replication, introduced with PostgreSQL 9.2, enables a standby server
    to replicate from another standby server rather than directly from the primary,
    meaning replication changes "cascade" down through a hierarchy of servers. This
-    can be used to reduce load on the primary and minimize bandwidth usage between
+    can be used to reduce load on the primary and minimize bandwith usage between
    sites. For more details, see the
    <ulink url="https://www.postgresql.org/docs/current/warm-standby.html#CASCADING-REPLICATION">
    PostgreSQL cascading replication documentation</ulink>.
@@ -328,14 +269,14 @@ description = "Main cluster"
    &repmgr; supports cascading replication. When cloning a standby,
    set the command-line parameter <literal>--upstream-node-id</literal> to the
    <varname>node_id</varname> of the server the standby should connect to, and
-    &repmgr; will create a replication configuration file to point to it. Note
+    &repmgr; will create <filename>recovery.conf</filename> to point to it. Note
    that if <literal>--upstream-node-id</literal> is not explicitly provided,
-    &repmgr; will set the standby's replication configuration to
+    &repmgr; will set the standby's <filename>recovery.conf</filename> to
    point to the primary node.
   </para>
   <para>
    To demonstrate cascading replication, first ensure you have a primary and standby
-    set up as shown in the <xref linkend="quickstart"/>.
+    set up as shown in the <xref linkend="quickstart">.
    Then create an additional standby server with <filename>repmgr.conf</filename> looking
    like this:
    <programlisting>
@@ -391,18 +332,18 @@ description = "Main cluster"
     cluster, you may wish to clone a downstream standby whose upstream node
     does not yet exist. In this case you can clone from the primary (or
     another upstream node); provide the parameter <literal>--upstream-conninfo</literal>
-     to explicitly set the upstream's <varname>primary_conninfo</varname> string
-     in the replication configuration.
+     to explictly set the upstream's <varname>primary_conninfo</varname> string
+     in <filename>recovery.conf</filename>.
    </simpara>
   </tip>
 </sect1>

 <sect1 id="cloning-advanced" xreflabel="Advanced cloning options">
-   <title>Advanced cloning options</title>
   <indexterm>
     <primary>cloning</primary>
     <secondary>advanced options</secondary>
   </indexterm>
+   <title>Advanced cloning options</title>

   <sect2 id="cloning-advanced-pg-basebackup-options" xreflabel="pg_basebackup options when cloning a standby">
    <title>pg_basebackup options when cloning a standby</title>
@@ -424,7 +365,7 @@ description = "Main cluster"
      <simpara>
        If <application>Barman</application> is set up for the cluster, it's possible to
        clone the standby directly from Barman, without any impact on the server the standby
-        is being cloned from. For more details see <xref linkend="cloning-from-barman"/>.
+        is being cloned from. For more details see <xref linkend="cloning-from-barman">.
      </simpara>
    </tip>
    <para>
@@ -449,13 +390,6 @@ description = "Main cluster"
      WAL directory. Any WALs generated during the cloning process will be copied here, and
      a symlink will automatically be created from the main data directory.
    </para>
-    <tip>
-      <para>
-        The <literal>--waldir</literal> (<literal>--xlogdir</literal>) option,
-        if present in <varname>pg_basebackup_options</varname>, will be honoured by &repmgr;
-        when cloning from Barman (&repmgr; 5.2 and later).
-      </para>
-    </tip>
    <para>
     See the <ulink url="https://www.postgresql.org/docs/current/app-pgbasebackup.html">PostgreSQL pg_basebackup documentation</ulink>
     for more details of available options.
@@ -476,8 +410,10 @@ description = "Main cluster"

    <para>
     The recommended way to do this is to store the password in the <literal>postgres</literal> system
-     user's <filename>~/.pgpass</filename> file.  For more information on using the password file, see
-     the documentation section <xref linkend="configuration-password-file"/>.
+     user's <filename>~/.pgpass</filename> file. It's also possible to store the password in the
+     environment variable <varname>PGPASSWORD</varname>, however this is not recommended for
+     security reasons. For more details see the
+     <ulink url="https://www.postgresql.org/docs/current/libpq-pgpass.html">PostgreSQL password file documentation</ulink>.
    </para>

    <note>
@@ -491,13 +427,26 @@ description = "Main cluster"
    </note>

    <para>
-     If, for whatever reason, you wish to include the password in the replication configuration file,
+     If, for whatever reason, you wish to include the password in <filename>recovery.conf</filename>,
     set <varname>use_primary_conninfo_password</varname> to <literal>true</literal> in
     <filename>repmgr.conf</filename>. This will read a password set in <varname>PGPASSWORD</varname>
     (but not <filename>~/.pgpass</filename>) and place it into the <varname>primary_conninfo</varname>
-     string in the replication configuration. Note that <varname>PGPASSWORD</varname>
-     will need to be set during any action which causes the replication configuration file to be
-     rewritten, e.g. <xref linkend="repmgr-standby-follow"/>.
+     string in <filename>recovery.conf</filename>. Note that <varname>PGPASSWORD</varname>
+     will need to be set during any action which causes <filename>recovery.conf</filename> to be
+     rewritten, e.g. <xref linkend="repmgr-standby-follow">.
+    </para>
+    <para>
+     It is of course also possible to include the password value in the <varname>conninfo</varname>
+     string for each node, but this is obviously a security risk and should be avoided.
+    </para>
+    <para>
+      From PostgreSQL 9.6, <application>libpq</application> supports the <varname>passfile</varname>
+      parameter in connection strings, which can be used to specify a password file other than
+      the default <filename>~/.pgpass</filename>.
+    </para>
+    <para>
+      To have &repmgr; write a custom password file in <varname>primary_conninfo</varname>,
+      specify its location in <varname>passfile</varname> in <filename>repmgr.conf</filename>.
    </para>
   </sect2>

@@ -508,40 +457,12 @@ description = "Main cluster"
     user (in addition to the user who manages the &repmgr; metadata). In this case,
     the replication user should be set in <filename>repmgr.conf</filename> via the parameter
     <varname>replication_user</varname>; &repmgr; will use this value when making
-     replication connections and generating the replication configuration. This
+     replication connections and generating <filename>recovery.conf</filename>. This
     value will also be stored in the parameter <literal>repmgr.nodes</literal>
     table for each node; it no longer needs to be explicitly specified when
-     cloning a node or executing <xref linkend="repmgr-standby-follow"/>.
+     cloning a node or executing <xref linkend="repmgr-standby-follow">.
    </para>
   </sect2>
-
-
-   <sect2 id="cloning-advanced-tablespace-mapping" xreflabel="Tablespace mapping">
-    <title>Tablespace mapping</title>
-    <indexterm>
-      <primary>tablespace mapping</primary>
-    </indexterm>
-    <para>
-      &repmgr; provides a <option>tablespace_mapping</option> configuration
-      file option, which will makes it possible to map the tablespace on the source node to
-      a different location on the local node.
-    </para>
-    <para>
-      To use this, add <option>tablespace_mapping</option> to <filename>repmgr.conf</filename>
-      like this:
-<programlisting>
-  tablespace_mapping='/var/lib/pgsql/tblspc1=/data/pgsql/tblspc1'
-</programlisting>
-    </para>
-    <para>
-      where the left-hand value represents the tablespace on the source node,
-      and the right-hand value represents  the tablespace on the standby to be cloned.
-    </para>
-    <para>
-      This parameter can be provided multiple times.
-    </para>
-   </sect2>
-
 </sect1>


--- a/doc/configuration-file-log-settings.sgml
+++ b/doc/configuration-file-log-settings.sgml
@@ -1,6 +1,4 @@
 <sect1 id="configuration-file-log-settings" xreflabel="log settings">
-  <title>Log settings</title>
-
  <indexterm>
    <primary>repmgr.conf</primary>
    <secondary>log settings</secondary>
@@ -9,9 +7,10 @@
    <primary>log settings</primary>
    <secondary>configuration in repmgr.conf</secondary>
  </indexterm>
+  <title>Log settings</title>

  <para>
-    By default, &repmgr; and &repmgrd; write log output to
+    By default, &repmgr; and <application>repmgrd</application> write log output to
    <literal>STDERR</literal>. An alternative log destination can be specified
    (either a file or <literal>syslog</literal>).
  </para>
@@ -25,7 +24,7 @@
    <para>
      This behaviour can be overriden with the command line option <option>--log-to-file</option>,
      which will redirect all logging output to the configured log destination. This is recommended
-      when &repmgr; is executed by another application, particularly &repmgrd;,
+      when &repmgr; is executed by another application, particularly <application>repmgrd</application>,
      to enable log output generated by the &repmgr; application to be stored for later reference.
    </para>
  </note>
@@ -33,11 +32,12 @@
  <variablelist>

   <varlistentry id="repmgr-conf-log-level" xreflabel="log_level">
-    <term><varname>log_level</varname> (<type>string</type>)</term>
-    <listitem>
+    <term><varname>log_level</varname> (<type>string</type>)
     <indexterm>
      <primary><varname>log_level</varname> configuration file parameter</primary>
     </indexterm>
+    </term>
+    <listitem>
     <para>
       One of <option>DEBUG</option>, <option>INFO</option>, <option>NOTICE</option>,
       <option>WARNING</option>, <option>ERROR</option>, <option>ALERT</option>, <option>CRIT</option>
@@ -76,11 +76,11 @@
    </term>
    <listitem>
     <para>
-       If <xref linkend="repmgr-conf-log-facility"/> is set to <option>STDERR</option>, log output
+       If <xref linkend="repmgr-conf-log-facility"> is set to <option>STDERR</option>, log output
       can be redirected to the specified file.
     </para>
     <para>
-       See <xref linkend="repmgrd-log-rotation"/> for information on configuring log rotation.
+       See <xref linkend="repmgrd-log-rotation"> for information on configuring log rotation.
     </para>
    </listitem>
   </varlistentry>
@@ -93,12 +93,12 @@
    </term>
    <listitem>
     <para>
-       This setting causes &repmgrd; to emit a status log
+       This setting causes <application>repmgrd</application> to emit a status log
       line at the specified interval (in seconds, default <literal>300</literal>)
-       describing &repmgrd;'s current state, e.g.:
+       describing <application>repmgrd</application>'s current state, e.g.:
     </para>
     <programlisting>
-      [2018-07-12 00:47:32] [INFO] monitoring connection to upstream node "node1" (ID: 1)</programlisting>
+      [2018-07-12 00:47:32] [INFO] monitoring connection to upstream node "node1" (node ID: 1)</programlisting>
    </listitem>
   </varlistentry>

--- a/doc/configuration-file-optional-settings.xml
+++ b/doc/configuration-file-optional-settings.xml
@@ -1,189 +0,0 @@
-<sect1 id="configuration-file-optional-settings" xreflabel="optional configuration file settings">
-
-  <title>Optional configuration file settings</title>
-
-  <indexterm>
-    <primary>repmgr.conf</primary>
-    <secondary>optional settings</secondary>
-  </indexterm>
-
-  <note>
-    <simpara>
-      This section documents a subset of optional configuration settings; for a full
-      for a full and annotated view of all configuration options see the
-      see the <ulink url="https://raw.githubusercontent.com/EnterpriseDB/repmgr/master/repmgr.conf.sample">sample repmgr.conf file</ulink>
-    </simpara>
-  </note>
-
-  <variablelist>
-
-
-    <varlistentry id="repmgr-conf-config-directory" xreflabel="config_directory">
-      <term><varname>config_directory</varname> (<type>string</type>)
-        <indexterm>
-          <primary><varname>config_directory</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          If PostgreSQL configuration files are located outside the data
-	  directory, specify the directory where the main
-	  <filename>postgresql.conf</filename> file is located.
-        </para>
-        <para>
-          This enables explicit provision of an external configuration file
-          directory, which if set will be passed to <command>pg_ctl</command> as the
-          <option>-D</option> parameter. Otherwise <command>pg_ctl</command> will
-          default to using the data directory, which will cause some operations
-          to fail if the configuration files are not present there.
-        </para>
-        <note>
-          <para>
-           This is implemented primarily for feature completeness and for
-           development/testing purposes. Users who have installed &repmgr; from
-           a package should <emphasis>not</emphasis> rely on  to stop/start/restart PostgreSQL,
-           instead they should set the appropriate <option>service_..._command</option>
-           for their operating system. For more details see
-           <xref linkend="configuration-file-service-commands"/>.
-          </para>
-        </note>
-      </listitem>
-    </varlistentry>
-
-    <varlistentry id="repmgr-conf-replication-user" xreflabel="replication_user">
-      <term><varname>replication_user</varname> (<type>string</type>)
-        <indexterm>
-          <primary><varname>replication_user</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          PostgreSQL user to make replication connections with.
-          If not set defaults, to the user defined in <xref linkend="repmgr-conf-conninfo"/>.
-        </para>
-      </listitem>
-    </varlistentry>
-
-
-
-    <varlistentry id="repmgr-conf-replication-type" xreflabel="replication_type">
-      <term><varname>replication_type</varname> (<type>string</type>)
-        <indexterm>
-          <primary><varname>replication_type</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          Must be <literal>physical</literal> (the default).
-        </para>
-      </listitem>
-    </varlistentry>
-
-    <varlistentry id="repmgr-conf-location" xreflabel="location">
-      <term><varname>location</varname> (<type>string</type>)
-        <indexterm>
-          <primary><varname>location</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          An arbitrary string defining the location of the node; this
-	  is used during failover to check visibility of the
-	  current primary node.
-        </para>
-        <para>
-          For more details see <xref linkend="repmgrd-network-split"/>.
-        </para>
-      </listitem>
-    </varlistentry>
-
-    <varlistentry id="repmgr-conf-use-replication-slots" xreflabel="use_replication_slots">
-      <term><varname>use_replication_slots</varname> (<type>boolean</type>)
-        <indexterm>
-          <primary><varname>use_replication_slots</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          Whether to use physical replication slots.
-        </para>
-        <note>
-          <para>
-	    When using replication slots,
-	    <varname>max_replication_slots</varname> should be configured for
-	    at least the number of standbys which will connect
-	    to the primary.
-          </para>
-        </note>
-      </listitem>
-    </varlistentry>
-
-    <varlistentry id="repmgr-conf-ssh-options" xreflabel="ssh_options">
-      <term><varname>ssh_options</varname> (<type>string</type>)
-        <indexterm>
-          <primary><varname>ssh_options</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          Options to append to the <command>ssh</command> command when executed
-          by &repmgr;.
-        </para>
-        <para>
-          We recommend adding <literal>-q</literal> to suppress any superfluous
-          SSH chatter such as login banners, and also an explicit
-          <option>ConnectTimeout</option> value,
-          e.g.:
-<programlisting>
-ssh_options='-q -o ConnectTimeout=10'</programlisting>
-        </para>
-      </listitem>
-    </varlistentry>
-
-    <varlistentry id="repmgr-conf-pg-bindir" xreflabel="pg_bindir">
-      <term><varname>pg_bindir</varname> (<type>string</type>)
-        <indexterm>
-          <primary><varname>pg_bindir</varname> configuration file parameter</primary>
-        </indexterm>
-      </term>
-      <listitem>
-        <para>
-          Path to the PostgreSQL binary directory (location of <application>pg_ctl</application>,
-          <application>pg_basebackup</application> etc.). Only required
-	  if these are not in the system <varname>PATH</varname>.
-        </para>
-        <tip>
-          <para>
-            When &repmgr; is executed via <application>SSH</application> (e.g. when running
-            <command><link linkend="repmgr-standby-switchover">repmgr standby switchover</link></command>,
-            <command><link linkend="repmgr-cluster-matrix">repmgr cluster matrix</link></command> or
-            <command><link linkend="repmgr-cluster-crosscheck">repmgr cluster crosscheck</link></command>,
-            or if it is executed as cronjob), a login shell will not be used and only the
-            default system <varname>PATH</varname> will be set. Therefore it's recommended to set
-            <varname>pg_bindir</varname> so &repmgr; can correctly invoke binaries on a remote
-            system and avoid potential path issues.
-          </para>
-        </tip>
-
-        <para>
-          Debian/Ubuntu users: you will probably need to  set this to the directory where
-          <application>pg_ctl</application> is located, e.g. <filename>/usr/lib/postgresql/9.6/bin/</filename>.
-        </para>
-        <para>
-          <emphasis>NOTE</emphasis>: <varname>pg_bindir</varname> is only used when &repmgr; directly
-	  executes PostgreSQL binaries; any user-defined scripts
-	  <emphasis>must</emphasis> be specified with the full path.
-        </para>
-
-      </listitem>
-    </varlistentry>
-  </variablelist>
-
-  <tip>
-    <simpara>
-      See the <ulink url="https://raw.githubusercontent.com/EnterpriseDB/repmgr/master/repmgr.conf.sample">sample repmgr.conf file</ulink>
-      for a full and annotated view of all configuration options.
-    </simpara>
-  </tip>
-
-</sect1>
--- a/doc/configuration-file-required-settings.sgml
+++ b/doc/configuration-file-required-settings.sgml
@@ -1,12 +1,10 @@
 <sect1 id="configuration-file-settings" xreflabel="required configuration file settings">
-
- <title>Required configuration file settings</title>
-
  <indexterm>
    <primary>repmgr.conf</primary>
    <secondary>required settings</secondary>
  </indexterm>

+ <title>Required configuration file settings</title>
 <para>
   Each <filename>repmgr.conf</filename> file must contain the following parameters:
 </para>
@@ -41,10 +39,6 @@
       called <varname>standby1</varname> (for example), things will be confusing
       to say the least.
     </para>
-     <para>
-       The string's maximum length is 63 characters and it should
-       contain only printable ASCII characters.
-     </para>
    </listitem>
   </varlistentry>

@@ -62,7 +56,7 @@
     </para>
     <para>
       For details on conninfo strings, see section <ulink
-       url="https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-CONNSTRING">Connection Strings</ulink>
+       url="https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-CONNSTRING">Connection Strings</>
        in the PosgreSQL documentation.
     </para>
     <para>
@@ -71,18 +65,18 @@
        string to determine the length of time which elapses before a network
        connection attempt is abandoned; for details see <ulink
        url="https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-CONNECT-CONNECT-TIMEOUT">
-        the PostgreSQL documentation</ulink>.
+        the PostgreSQL documentation</>.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="repmgr-conf-data-directory" xreflabel="data_directory">
-    <term><varname>data_directory</varname> (<type>string</type>)</term>
+    <term><varname>data_directory</varname> (<type>string</type>)
+     <indexterm>
+      <primary><varname>data_directory</varname> configuration file parameter</primary>
+     </indexterm>
+    </term>
    <listitem>
-      <indexterm>
-        <primary><varname>data_directory</varname> configuration file parameter</primary>
-      </indexterm>
-
     <para>
       The node's data directory. This is needed by repmgr
       when performing operations when the PostgreSQL instance
@@ -96,9 +90,33 @@
  </variablelist>
 </para>

- <para>
-   See <xref linkend="configuration-file-optional-settings"/> for further configuration options.
- </para>
+  <para>
+    For a full list of annotated configuration items, see the file
+    <ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink>.
+  </para>
+  <para>
+    For <application>repmgrd</application>-specific settings, see <xref linkend="repmgrd-configuration">.
+  </para>

+  <note>
+    <para>
+    The following parameters in the configuration file can be overridden with
+    command line options:
+    <itemizedlist>
+     <listitem>
+       <simpara>
+         <literal>-L/--log-level</literal> overrides <literal>log_level</literal> in
+         <filename>repmgr.conf</filename>
+       </simpara>
+     </listitem>
+     <listitem>
+       <simpara>
+         <literal>-b/--pg_bindir</literal> overrides <literal>pg_bindir</literal> in
+         <filename>repmgr.conf</filename>
+       </simpara>
+     </listitem>
+    </itemizedlist>
+    </para>
+  </note>

 </sect1>
--- a/doc/configuration-file-service-commands.sgml
+++ b/doc/configuration-file-service-commands.sgml
@@ -1,6 +1,4 @@
 <sect1 id="configuration-file-service-commands" xreflabel="service command settings">
-  <title>Service command settings</title>
-
  <indexterm>
    <primary>repmgr.conf</primary>
    <secondary>service command settings</secondary>
@@ -9,9 +7,10 @@
    <primary>service command settings</primary>
    <secondary>configuration in repmgr.conf</secondary>
  </indexterm>
+  <title>Service command settings</title>

  <para>
-    In some circumstances, &repmgr; (and &repmgrd;) need to
+    In some circumstances, &repmgr; (and <application>repmgrd</application>) need to
    be able to stop, start or restart PostgreSQL. &repmgr; commands which need to do this
    include <link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>,
    <link linkend="repmgr-standby-switchover"><command>repmgr standby switchover</command></link> and
@@ -27,9 +26,7 @@
  <note>
    <para>
      If using <application>systemd</application>, ensure you have <varname>RemoveIPC</varname> set to <literal>off</literal>.
-      See the <ulink url="https://www.postgresql.org/docs/current/index.html">PostgreSQL documentation</ulink> section
-      <ulink url="https://www.postgresql.org/docs/current/kernel-resources.html#SYSTEMD-REMOVEIPC">systemd RemoveIPC</ulink>
-      and also the <ulink url="https://wiki.postgresql.org/wiki/Systemd">systemd</ulink>
+      See the <ulink url="https://wiki.postgresql.org/wiki/Systemd">systemd</ulink>
      entry in the <ulink url="https://wiki.postgresql.org/wiki/Main_Page">PostgreSQL wiki</ulink> for details.
    </para>
  </note>
@@ -71,7 +68,7 @@
    </para>
    <para>
      Do not confuse this with <varname>promote_command</varname>, which is used
-      by &repmgrd; to execute <xref linkend="repmgr-standby-promote"/>.
+      by <application>repmgrd</application> to execute <xref linkend="repmgr-standby-promote">.
    </para>
  </note>

--- a/doc/configuration-file.sgml
+++ b/doc/configuration-file.sgml
@@ -0,0 +1,120 @@
+<sect1 id="configuration-file" xreflabel="configuration file">
+  <indexterm>
+    <primary>repmgr.conf</primary>
+  </indexterm>
+
+  <indexterm>
+    <primary>configuration</primary>
+    <secondary>repmgr.conf</secondary>
+  </indexterm>
+
+  <title>Configuration file</title>
+
+  <para>
+    <application>repmgr</application> and <application>repmgrd</application>
+    use a common configuration file, by default called
+    <filename>repmgr.conf</filename> (although any name can be used if explicitly specified).
+    <filename>repmgr.conf</filename> must contain a number of required parameters, including
+    the database connection string for the local node and the location
+    of its data directory; other values will be inferred from defaults if
+    not explicitly supplied. See section <xref linkend="configuration-file-settings">
+    for more details.
+  </para>
+
+  <sect2 id="configuration-file-format" xreflabel="configuration file format">
+
+    <indexterm>
+      <primary>repmgr.conf</primary>
+      <secondary>format</secondary>
+    </indexterm>
+
+    <title>Configuration file format</title>
+
+    <para>
+      <filename>repmgr.conf</filename> is a plain text file with one parameter/value
+      combination per line.
+    </para>
+    <para>
+      Whitespace is insignificant (except within a quoted parameter value) and blank lines are ignored.
+      Hash marks (<literal>#</literal>) designate the remainder of the line as a comment.
+      Parameter values that are not simple identifiers or numbers should be single-quoted.
+      Note that single quote cannot be embedded in a parameter value.
+    </para>
+    <important>
+      <para>
+        &repmgr; will interpret double-quotes as being part of a string value; only use single quotes
+        to quote parameter values.
+      </para>
+    </important>
+
+    <para>
+      Example of a valid <filename>repmgr.conf</filename> file:
+      <programlisting>
+# repmgr.conf
+
+node_id=1
+node_name= node1
+conninfo ='host=node1 dbname=repmgr user=repmgr connect_timeout=2'
+data_directory = /var/lib/pgsql/11/data</programlisting>
+
+    </para>
+  </sect2>
+
+
+
+  <sect2 id="configuration-file-location" xreflabel="configuration file location">
+  <indexterm>
+    <primary>repmgr.conf</primary>
+    <secondary>location</secondary>
+  </indexterm>
+
+  <title>Configuration file location</title>
+
+  <para>
+   The configuration file will be searched for in the following locations:
+   <itemizedlist spacing="compact" mark="bullet">
+    <listitem>
+     <para>a configuration file specified by the <literal>-f/--config-file</literal> command line option</para>
+    </listitem>
+    <listitem>
+     <para>
+      a location specified by the package maintainer (if <application>repmgr</application>
+      as installed from a package and the package maintainer has specified the configuration
+      file location)
+     </para>
+    </listitem>
+    <listitem>
+     <para><filename>repmgr.conf</filename> in the local directory</para>
+    </listitem>
+    <listitem>
+      <para><filename>/etc/repmgr.conf</filename></para>
+    </listitem>
+    <listitem>
+     <para>the directory reported by <application>pg_config --sysconfdir</application></para>
+    </listitem>
+   </itemizedlist>
+  </para>
+
+  <para>
+   Note that if a file is explicitly specified with <literal>-f/--config-file</literal>,
+   an error will be raised if it is not found or not readable, and no attempt will be made to
+   check default locations; this is to prevent <application>repmgr</application> unexpectedly
+   reading the wrong configuration file.
+  </para>
+
+  <note>
+    <para>
+      If providing the configuration file location with <literal>-f/--config-file</literal>,
+      avoid using a relative path, particularly when executing <xref linkend="repmgr-primary-register">
+      and <xref linkend="repmgr-standby-register">, as &repmgr; stores the configuration file location
+      in the repmgr metadata for use when &repmgr; is executed remotely (e.g. during
+      <xref linkend="repmgr-standby-switchover">). &repmgr; will attempt to convert the
+      a relative path into an absolute one, but this may not be the same as the path you
+      would explicitly provide (e.g. <filename>./repmgr.conf</filename> might be converted
+      to <filename>/path/to/./repmgr.conf</filename>, whereas you'd normally write
+      <filename>/path/to/repmgr.conf</filename>).
+    </para>
+   </note>
+
+   </sect2>
+ </sect1>
--- a/doc/configuration-file.xml
+++ b/doc/configuration-file.xml
@@ -1,315 +0,0 @@
-<sect1 id="configuration-file" xreflabel="configuration file">
-
-  <title>Configuration file</title>
-
-  <indexterm>
-    <primary>repmgr.conf</primary>
-  </indexterm>
-
-  <indexterm>
-    <primary>configuration</primary>
-    <secondary>repmgr.conf</secondary>
-  </indexterm>
-
-  <para>
-    <application>repmgr</application> and &repmgrd;
-    use a common configuration file, by default called
-    <filename>repmgr.conf</filename> (although any name can be used if explicitly specified).
-    <filename>repmgr.conf</filename> must contain a number of required parameters, including
-    the database connection string for the local node and the location
-    of its data directory; other values will be inferred from defaults if
-    not explicitly supplied. See section <xref linkend="configuration-file-settings"/>
-    for more details.
-  </para>
-
-  <sect2 id="configuration-file-format" xreflabel="configuration file format">
-
-    <title>Configuration file format</title>
-
-    <indexterm>
-      <primary>repmgr.conf</primary>
-      <secondary>format</secondary>
-    </indexterm>
-
-
-
-    <para>
-      <filename>repmgr.conf</filename> is a plain text file with one parameter/value
-      combination per line.
-    </para>
-    <para>
-      Whitespace is insignificant (except within a quoted parameter value) and blank lines are ignored.
-      Hash marks (<literal>#</literal>) designate the remainder of the line as a comment.
-      Parameter values that are not simple identifiers or numbers should be single-quoted.
-    </para>
-    <para>
-      To embed a single quote in a parameter value, write either two quotes (preferred) or backslash-quote.
-    </para>
-
-    <para>
-      Example of a valid <filename>repmgr.conf</filename> file:
-      <programlisting>
-# repmgr.conf
-
-node_id=1
-node_name= node1
-conninfo ='host=node1 dbname=repmgr user=repmgr connect_timeout=2'
-data_directory = '/var/lib/pgsql/12/data'</programlisting>
-
-    </para>
-
-    <note>
-      <para>
-        Beginning with <link linkend="release-5.0">repmgr 5.0</link>, configuration
-        file parsing has been tightened up and now matches the way PostgreSQL
-        itself parses configuration files.
-      </para>
-      <para>
-        This means <filename>repmgr.conf</filename> files used with earlier &repmgr;
-        versions may need slight modification before they can be used with &repmgr; 5
-        and later.
-      </para>
-      <para>
-        The main change is that &repmgr; requires most string values to be
-        enclosed in single quotes. For example, this was previously valid:
-          <programlisting>
-conninfo=host=node1 user=repmgr dbname=repmgr connect_timeout=2</programlisting>
-          but must now be changed to:
-          <programlisting>
-conninfo='host=node1 user=repmgr dbname=repmgr connect_timeout=2'</programlisting>
-      </para>
-    </note>
-
-
-    <sect3 id="configuration-file-include-directives" xreflabel="configuration file include directives">
-
-      <title>Configuration file include directives</title>
-
-      <indexterm>
-        <primary>repmgr.conf</primary>
-        <secondary>include directives</secondary>
-      </indexterm>
-      <para>
-        From &repmgr; 5.2, the configuration file can contain the following include directives:
-        <itemizedlist spacing="compact" mark="bullet">
-          <listitem>
-            <simpara>
-              <option>include</option>: include the specified file,
-              either as an absolute path or path relative to the current file
-            </simpara>
-          </listitem>
-
-          <listitem>
-            <simpara>
-              <option>include_if_exists</option>: include the specified file.
-              The file is specified as an absolute path or path relative to the current file.
-              However, if it does not exist, an error will not be raised.
-            </simpara>
-          </listitem>
-
-          <listitem>
-            <simpara>
-              <option>include_dir</option>: include files in the specified directory
-              which have the <filename>.conf</filename> suffix.
-              The directory is specified either as an absolute path or path
-              relative to the current file
-            </simpara>
-          </listitem>
-
-        </itemizedlist>
-      </para>
-      <para>
-        These behave in exactly the same way as the PostgreSQL configuration file processing;
-        see the <ulink url="https://www.postgresql.org/docs/current/config-setting.html#CONFIG-INCLUDES">PostgreSQL documentation</ulink>
-        for additional details.
-      </para>
-    </sect3>
-
-  </sect2>
-
-
-  <sect2 id="configuration-file-items" xreflabel="configuration file items">
-
-    <title>Configuration file items</title>
-    <para>
-      The following sections document some sections of the configuration file:
-       <itemizedlist>
-          <listitem>
-            <simpara>
-              <xref linkend="configuration-file-settings"/>
-            </simpara>
-          </listitem>
-
-          <listitem>
-            <simpara>
-              <xref linkend="configuration-file-optional-settings"/>
-            </simpara>
-          </listitem>
-
-          <listitem>
-            <simpara>
-              <xref linkend="configuration-file-log-settings"/>
-            </simpara>
-          </listitem>
-
-
-          <listitem>
-            <simpara>
-              <xref linkend="configuration-file-service-commands"/>
-            </simpara>
-          </listitem>
-
-       </itemizedlist>
-
-    </para>
-    <para>
-      For a full list of annotated configuration items, see the file
-      <ulink url="https://raw.githubusercontent.com/EnterpriseDB/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink>.
-    </para>
-    <para>
-      For &repmgrd;-specific settings, see <xref linkend="repmgrd-configuration"/>.
-    </para>
-
-    <note>
-      <para>
-        The following parameters in the configuration file can be overridden with
-        command line options:
-        <itemizedlist>
-          <listitem>
-            <simpara>
-              <literal>-L/--log-level</literal> overrides <literal>log_level</literal> in
-              <filename>repmgr.conf</filename>
-            </simpara>
-          </listitem>
-          <listitem>
-            <simpara>
-              <literal>-b/--pg_bindir</literal> overrides <literal>pg_bindir</literal> in
-              <filename>repmgr.conf</filename>
-            </simpara>
-          </listitem>
-        </itemizedlist>
-      </para>
-    </note>
-
-  </sect2>
-
-  <sect2 id="configuration-file-location" xreflabel="configuration file location">
-  <title>Configuration file location</title>
-
-  <indexterm>
-    <primary>repmgr.conf</primary>
-    <secondary>location</secondary>
-  </indexterm>
-
-
-  <para>
-   The configuration file will be searched for in the following locations:
-   <itemizedlist spacing="compact" mark="bullet">
-    <listitem>
-     <para>a configuration file specified by the <literal>-f/--config-file</literal> command line option</para>
-    </listitem>
-    <listitem>
-     <para>
-      a location specified by the package maintainer (if <application>repmgr</application>
-      as installed from a package and the package maintainer has specified the configuration
-      file location)
-     </para>
-    </listitem>
-    <listitem>
-     <para><filename>repmgr.conf</filename> in the local directory</para>
-    </listitem>
-    <listitem>
-      <para><filename>/etc/repmgr.conf</filename></para>
-    </listitem>
-    <listitem>
-     <para>the directory reported by <application>pg_config --sysconfdir</application></para>
-    </listitem>
-   </itemizedlist>
-  </para>
-
-  <para>
-    In examples provided in this documentation, it is assumed the configuration file is located
-    at <filename>/etc/repmgr.conf</filename>. If &repmgr; is installed from a package, the
-    configuration file will probably be located at another location specified by the packager;
-    see appendix <xref linkend="appendix-packages"/> for configuration file locations in
-    different packaging systems.
-  </para>
-
-  <para>
-   Note that if a file is explicitly specified with <literal>-f/--config-file</literal>,
-   an error will be raised if it is not found or not readable, and no attempt will be made to
-   check default locations; this is to prevent <application>repmgr</application> unexpectedly
-   reading the wrong configuration file.
-  </para>
-
-  <note>
-    <para>
-      If providing the configuration file location with <literal>-f/--config-file</literal>,
-      avoid using a relative path, particularly when executing <xref linkend="repmgr-primary-register"/>
-      and <xref linkend="repmgr-standby-register"/>, as &repmgr; stores the configuration file location
-      in the repmgr metadata for use when &repmgr; is executed remotely (e.g. during
-      <xref linkend="repmgr-standby-switchover"/>). &repmgr; will attempt to convert the
-      a relative path into an absolute one, but this may not be the same as the path you
-      would explicitly provide (e.g. <filename>./repmgr.conf</filename> might be converted
-      to <filename>/path/to/./repmgr.conf</filename>, whereas you'd normally write
-      <filename>/path/to/repmgr.conf</filename>).
-    </para>
-   </note>
-  </sect2>
-
-  <sect2 id="configuration-file-postgresql-major-upgrades" xreflabel="configuration file and PostgreSQL major version upgrades">
-    <title>Configuration file and PostgreSQL major version upgrades</title>
-
-    <indexterm>
-      <primary>repmgr.conf</primary>
-      <secondary>PostgreSQL major version upgrades</secondary>
-    </indexterm>
-
-    <para>
-      When upgrading the PostgreSQL cluster to a new major version, <filename>repmgr.conf</filename>
-      will probably needed to be updated.
-    </para>
-    <para>
-      Usually <option>pg_bindir</option> and <option>data_directory</option> will need to be modified,
-      particularly if the default package locations are used, as these usually change.
-    </para>
-
-     <para>
-       It's also possible the location of <filename>repmgr.conf</filename> itself will change
-       (e.g. from <filename>/etc/repmgr/11/repmgr.conf</filename> to <filename>/etc/repmgr/12/repmgr.conf</filename>).
-       This is stored as part of the &repmgr; metadata and is used by &repmgr; to execute &repmgr; remotely
-       (e.g. during a <link linkend="performing-switchover">switchover operation</link>).
-     </para>
-     <para>
-       If the content and/or location of <filename>repmgr.conf</filename> has changed, the &repmgr; metadata
-       needs to be updated to reflect this. The &repmgr; metadata can be updated on each node with:
-       <itemizedlist spacing="compact" mark="bullet">
-         <listitem>
-           <simpara>
-             <link linkend="repmgr-primary-register">
-               <command>repmgr primary register --force -f /path/to/repmgr.conf</command>
-             </link>
-           </simpara>
-         </listitem>
-
-         <listitem>
-           <simpara>
-             <link linkend="repmgr-standby-register">
-               <command>repmgr standby register --force -f /path/to/repmgr.conf</command>
-             </link>
-           </simpara>
-         </listitem>
-
-
-         <listitem>
-           <simpara>
-             <link linkend="repmgr-witness-register">
-               <command>repmgr witness register --force -f /path/to/repmgr.conf -h primary_host</command>
-             </link>
-           </simpara>
-         </listitem>
-       </itemizedlist>
-     </para>
-
-   </sect2>
- </sect1>
--- a/doc/configuration-password-management.xml
+++ b/doc/configuration-password-management.xml
@@ -1,175 +0,0 @@
-<sect1 id="configuration-password-management" xreflabel="password management">
-
-  <title>Password Management</title>
-  <indexterm>
-    <primary>passwords</primary>
-  </indexterm>
-
-  <sect2 id="configuration-password-management-options" xreflabel="password management options">
-  <title>Password Management Options</title>
-  <indexterm>
-    <primary>passwords</primary>
-    <secondary>options for managing</secondary>
-  </indexterm>
-
-  <para>
-    For security purposes it's desirable to protect database access using a password.
-  </para>
-  <para>
-    PostgreSQL has three ways of providing a password:
-    <itemizedlist spacing="compact" mark="bullet">
-
-       <listitem>
-         <simpara>
-           including the password in the <option>conninfo</option> string
-           (e.g. &quot;<literal>host=node1 dbname=repmgr user=repmgr password=foo</literal>&quot;)
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           exporting the password as an environment variable (<envar>PGPASSWORD</envar>)
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           storing the password in a dedicated password file
-         </simpara>
-       </listitem>
-    </itemizedlist>
-  </para>
-  <para>
-    We strongly advise against including the password in the <option>conninfo</option> string, as
-    this will result in the database password being exposed in various places, including in the
-    <filename>repmgr.conf</filename> file, the <literal>repmgr.nodes</literal> table, any output
-    generated by &repmgr; which lists the node <option>conninfo</option> strings (e.g.
-    <link linkend="repmgr-cluster-show">repmgr cluster show</link>) and in the &repmgr; log file,
-    particularly at <option>log_level=DEBUG</option>.
-  </para>
-  <note>
-    <para>
-      Currently &repmgr; does not fully support use of the <option>password</option> option in the
-      <option>conninfo</option> string.
-    </para>
-  </note>
-  <para>
-    Exporting the password as an environment variable (<envar>PGPASSWORD</envar>) is considered
-    less insecure, but the PostgreSQL documentation explicitly recommends against doing this:
-   <blockquote>
-     <attribution><ulink url="https://www.postgresql.org/docs/current/libpq-envars.html">Environment Variables</ulink></attribution>
-     <para>
-       <envar>PGPASSWORD</envar> behaves the same as the <option>password</option>
-       connection parameter. Use of this environment variable
-       is not recommended for security reasons, as some operating systems
-       allow non-root users to see process environment variables via
-       <application>ps</application>; instead consider using a password file.
-     </para>
-    </blockquote>
-
-  </para>
-  <para>
-    The most secure option for managing passwords is to use a dedicated password file; see the following
-    section for more details.
-  </para>
-
-  </sect2>
-
-  <sect2 id="configuration-password-file" xreflabel="password file">
-    <title>Using a password file</title>
-    <indexterm>
-      <primary>pgpass</primary>
-    </indexterm>
-
-    <indexterm>
-      <primary>.pgpass</primary>
-    </indexterm>
-
-    <indexterm>
-      <primary>passwords</primary>
-      <secondary>using a password file</secondary>
-    </indexterm>
-
-    <para>
-      The most secure way of storing passwords is in a password file,
-      which by default is <filename>~/.pgpass</filename>. This file
-      can only be read by the system user who owns the file, and
-      PostgreSQL will refuse to use the file unless read/write
-      permissions are restricted to the file owner. The password(s)
-      contained in the file will not be directly accessed by
-      &repmgr; (or any other libpq-based client software such as <application>psql</application>).
-    </para>
-    <para>
-       For full details see the
-       <ulink url="https://www.postgresql.org/docs/current/libpq-pgpass.html">PostgreSQL password file documentation</ulink>.
-    </para>
-    <para>
-      For use with &repmgr;, the <filename>~/.pgpass</filename> must two entries for each
-      node in the replication cluster: one for the &repmgr; user who accesses the &repmgr; metadatabase,
-      and one for replication connections (regardless of whether a dedicated replication user is used).
-      The file must be present on each node in the replication cluster.
-    </para>
-    <para>
-      A <filename>~/.pgpass</filename> file for a 3-node cluster where the <literal>repmgr</literal> database user
-      is used for both for accessing the  &repmgr; metadatabase and for replication connections would look like this:
-      <programlisting>
-node1:5432:repmgr:repmgr:foo
-node1:5432:replication:repmgr:foo
-node2:5432:repmgr:repmgr:foo
-node2:5432:replication:repmgr:foo
-node3:5432:repmgr:repmgr:foo
-node3:5432:replication:repmgr:foo</programlisting>
-      If a dedicated replication user (here: <literal>repluser</literal>) is in use, the file would look like this:
-      <programlisting>
-node1:5432:repmgr:repmgr:foo
-node1:5432:replication:repluser:foo
-node2:5432:repmgr:repmgr:foo
-node2:5432:replication:repluser:foo
-node3:5432:repmgr:repmgr:foo
-node3:5432:replication:repluser:foo</programlisting>
-      If you are planning to use the <option>-S</option>/<option>--superuser</option> option,
-      there must also be an entry enabling the superuser to connect to the &repmgr; database.
-      Assuming the superuser is <literal>postgres</literal>, the file would look like this:
-        <programlisting>
-node1:5432:repmgr:repmgr:foo
-node1:5432:repmgr:postgres:foo
-node1:5432:replication:repluser:foo
-node2:5432:repmgr:repmgr:foo
-node2:5432:repmgr:postgres:foo
-node2:5432:replication:repluser:foo
-node3:5432:repmgr:repmgr:foo
-node3:5432:repmgr:postgres:foo
-node3:5432:replication:repluser:foo</programlisting>
-    </para>
-
-    <para>
-      The <filename>~/.pgpass</filename> file can be simplified with the use of wildcards if
-      there is no requirement to restrict provision of passwords to particular hosts, ports
-      or databases. The preceding file could then be formatted like this:
-        <programlisting>
-*:*:*:repmgr:foo
-*:*:*:postgres:foo
-</programlisting>
-    </para>
-
-    <note>
-      <para>
-        It's possible to specify an alternative location for the <filename>~/.pgpass</filename> file, either via
-        the environment variable <envar>PGPASSFILE</envar>, or (from PostgreSQL 9.6) using the
-        <varname>passfile</varname> parameter in connection strings.
-      </para>
-      <para>
-        If using the <varname>passfile</varname> parameter, it's essential to ensure the file is in the same
-        location on all nodes, as when connecting to a remote node, the file referenced is the one on the
-        local node.
-      </para>
-      <para>
-        Additionally, you <emphasis>must</emphasis> specify the passfile location in <filename>repmgr.conf</filename>
-        with the <option>passfile</option> option so &repmgr; can write the correct path when creating the
-        <option>primary_conninfo</option> parameter for replication configuration on standbys.
-      </para>
-    </note>
-
-  </sect2>
-
-</sect1>
--- a/doc/configuration-permissions.xml
+++ b/doc/configuration-permissions.xml
@@ -1,192 +0,0 @@
-<sect1 id="configuration-permissions" xreflabel="Database user permissions">
-  <title>repmgr database user permissions</title>
-
-  <indexterm>
-    <primary>configuration</primary>
-    <secondary>database user permissions</secondary>
-  </indexterm>
-
-  <para>
-    If the &repmgr; database user (the PostgreSQL user defined in the
-    <varname>conninfo</varname> setting is a superuser, no further user permissions need
-    to be granted.
-  </para>
-
-  <sect2 id="configuration-permissions-no-superuser" xreflabel="Non-super user permissions">
-    <title>repmgr user as a non-superuser</title>
-    <para>
-      In principle the &repmgr; database user does not need to be a superuser.
-      In this case the &repmgr; will need to be granted execution permissions on certain
-      functions, and membership of certain roles. However be aware that &repmgr; does
-      expect to be able to execute certain commands which are restricted to superusers;
-      in this case either a superuser must be specified with the <option>-S</option>/<option>--superuser</option>
-      (where available) option, or the corresponding action should be executed manually as a superuser.
-    </para>
-    <para>
-      The following sections describe the actions needed to use &repmgr; with a non-superuser,
-      and relevant caveats.
-    </para>
-    <sect3 id="configuration-permissions-replication" xreflabel="Replication role">
-      <title>Replication role</title>
-      <para>
-        &repmgr; requires a database user with the <literal>REPLICATION</literal> role
-        to be able to create a replication connection and (if configured) to administer
-        replication slots.
-      </para>
-      <para>
-        By default this is the database user defined in the <varname>conninfo</varname>
-        setting. This user can be:
-        <itemizedlist spacing="compact" mark="bullet">
-          <listitem>
-            <simpara>
-              a superuser
-            </simpara>
-          </listitem>
-          <listitem>
-            <simpara>
-              a non-superuser with the <literal>REPLICATION</literal> role
-            </simpara>
-          </listitem>
-          <listitem>
-            <simpara>
-              another user defined in the <filename>repmgr.conf</filename> parameter <varname>replication_user</varname> with the <literal>REPLICATION</literal> role
-            </simpara>
-          </listitem>
-        </itemizedlist>
-      </para>
-    </sect3>
-
-    <sect3 id="configuration-permissions-roles" xreflabel="Database roles for non-superusers">
-      <title>Database roles</title>
-      <para>
-        A non-superuser &repmgr; database user should be a member of the following
-        <ulink url="https://www.postgresql.org/docs/current/predefined-roles.html">predefined roles</ulink>
-        (PostgreSQL 10 and later):
-        <itemizedlist spacing="compact" mark="bullet">
-          <listitem>
-            <simpara>
-              <varname>pg_read_all_stats</varname>
-              (to read the <varname>status</varname> column of <literal>pg_stat_replication</literal>
-              and execute <function>pg_database_size()</function> on all databases)
-            </simpara>
-          </listitem>
-          <listitem>
-            <simpara>
-              <varname>pg_read_all_settings</varname> (to access the <varname>data_directory</varname> setting)
-            </simpara>
-          </listitem>
-        </itemizedlist>
-        Alternatively the meta-role <varname>pg_monitor</varname> can be granted, which includes membership
-        of the above predefined roles.
-      </para>
-      <para>
-        Membership of these roles can be granted with e.g. <command>GRANT pg_read_all_stats TO repmgr</command>.
-      </para>
-      <para>
-        Users of PostgreSQL 9.6 or earlier should upgrade to a supported PostgreSQL version, or provide
-        the <option>-S</option>/<option>--superuser</option> where available.
-      </para>
-    </sect3>
-
-    <sect3 id="configuration-permissions-extension" xreflabel="Extension creation">
-      <title>Extension creation</title>
-      <para>
-        &repmgr; requires that the database defined in the <varname>conninfo</varname>
-        setting contains the <literal>repmgr</literal> extension. The database user defined in the
-        <varname>conninfo</varname> setting must be able to access this database and
-        the database objects contained within the extension.
-      </para>
-      <para>
-        The <literal>repmgr</literal> extension can only be installed by a superuser.
-        If the &repmgr; user is a superuser, &repmgr; will create the extension automatically.
-      </para>
-
-      <para>
-        Alternatively, the extension can be created manually by a superuser
-        (with &quot;<command>CREATE EXTENSION repmgr</command>&quot;) before executing
-        <link linkend="repmgr-primary-register">repmgr primary register</link>.
-      </para>
-    </sect3>
-
-
-    <sect3 id="configuration-permissions-functions" xreflabel="Function permissions for non-superusers">
-      <title>Function permissions</title>
-      <para>
-        If the &repmgr; database user is not a superuser, <literal>EXECUTE</literal> permission should be
-        granted on the following function:
-        <itemizedlist spacing="compact" mark="bullet">
-          <listitem>
-            <simpara>
-              <function>pg_wal_replay_resume()</function> (required by &repmgrd; during failover operations;
-              if permission is not granted, the failoved process may not function reliably if a node
-              has WAL replay paused)
-            </simpara>
-          </listitem>
-          <listitem>
-            <simpara>
-              <function>pg_promote()</function> (PostgreSQL 12 and later; if permission is not granted,
-              &repmgr; will fall back to <command>pg_ctl promote</command>)
-            </simpara>
-          </listitem>
-        </itemizedlist>
-      </para>
-      <para>
-        <literal>EXECUTE</literal> permission on functions can be granted with e.g.:
-        <command>GRANT EXECUTE ON FUNCTION pg_catalog.pg_wal_replay_resume() TO repmgr</command>.
-      </para>
-    </sect3>
-
-    <sect3 id="configuration-permissions-superuser-required" xreflabel="repmgr actions requiring a superuser">
-      <title>repmgr actions requiring a superuser</title>
-      <para>
-        In some circumstances, &repmgr; may need to perform an operation which cannot be delegated to a
-        non-superuser.
-        <itemizedlist spacing="compact" mark="bullet">
-          <listitem>
-            <simpara>
-              The <command>CHECKPOINT</command> command is executed by
-              <link linkend="repmgr-standby-switchover">repmgr standby switchover</link>. This can only
-              be executed by a superuser; if the &repmgr; user is not a superuser,
-              the <option>-S</option>/<option>--superuser</option> should be used.
-            </simpara>
-            <simpara>
-              If &repmgr; is not able to execute <command>CHECKPOINT</command>,
-              there is a risk that the demotion candidate may not  be able to shut down as smoothly as might otherwise
-              have been the case.
-            </simpara>
-          </listitem>
-          <listitem>
-            <simpara>
-              The <command>ALTER SYSTEM</command> is executed by &repmgrd; if
-              <varname>standby_disconnect_on_failover</varname> is set to <literal>true</literal> in
-              <filename>repmgr.conf</filename>. <command>ALTER SYSTEM</command> can only be executed by
-              a superuser; if the &repmgr; user is not a superuser, this functionality will not be available.
-            </simpara>
-          </listitem>
-        </itemizedlist>
-      </para>
-    </sect3>
-
-    <sect3 id="configuration-permissions-superuser-option" xreflabel="repmgr commands with --superuser option">
-      <title>repmgr commands with --superuser option</title>
-      <para>
-        The following repmgr commands provide the <option>-S</option>/<option>--superuser</option> option:
-        <itemizedlist spacing="compact" mark="bullet">
-          <listitem>
-            <simpara><link linkend="repmgr-standby-clone">repmgr standby clone</link> (to be able to copy configuration files outside of the data directory if <option>--copy-external-config-files</option> provided)</simpara>
-          </listitem>
-          <listitem>
-            <simpara><link linkend="repmgr-standby-switchover">repmgr standby switchover</link> (to execute <command>CHECKPOINT</command>)</simpara>
-          </listitem>
-          <listitem>
-            <simpara><link linkend="repmgr-node-check">repmgr node check</link> (to execute <command>repmgr node check --data-directory-config</command>; note this is also called by <link linkend="repmgr-standby-switchover">repmgr standby switchover</link>)</simpara>
-          </listitem>
-          <listitem>
-            <simpara><link linkend="repmgr-node-service">repmgr node service</link> (to execute <command>CHECKPOINT</command> via the <option>--checkpoint</option>; note this is also called by <link linkend="repmgr-standby-switchover">repmgr standby switchover</link>)</simpara>
-          </listitem>
-        </itemizedlist>
-      </para>
-    </sect3>
-
-  </sect2>
-</sect1>
--- a/doc/configuration.sgml
+++ b/doc/configuration.sgml
@@ -2,8 +2,6 @@
  <title>repmgr configuration</title>

  <sect1 id="configuration-prerequisites" xreflabel="Prerequisites for configuration">
-    <title>Prerequisites for configuration</title>
-
    <indexterm>
      <primary>configuration</primary>
      <secondary>prerequisites</secondary>
@@ -14,6 +12,7 @@
      <secondary>ssh</secondary>
    </indexterm>

+    <title>Prerequisites for configuration</title>
    <para>
     Following software must be installed on both servers:
     <itemizedlist spacing="compact" mark="bullet">
@@ -63,8 +62,6 @@
    </tip>

  <sect2 id="configuration-postgresql" xreflabel="PostgreSQL configuration">
-      <title>PostgreSQL configuration for &repmgr;</title>
-
    <indexterm>
      <primary>configuration</primary>
      <secondary>PostgreSQL</secondary>
@@ -74,6 +71,7 @@
      <primary>PostgreSQL configuration</primary>
    </indexterm>

+    <title>PostgreSQL configuration for &repmgr;</title>
    <para>
      The following PostgreSQL configuration parameters may need to be changed in order
      for &repmgr; (and replication itself) to function correctly.
@@ -83,14 +81,13 @@

      <varlistentry>

+        <indexterm>
+          <primary>hot_standby</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>hot_standby</option></term>
        <listitem>
-
-          <indexterm>
-            <primary>hot_standby</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
            <option>hot_standby</option> must always be set to <literal>on</literal>, as &repmgr; needs
            to be able to connect to each server it manages.
@@ -107,15 +104,13 @@

      <varlistentry>

+        <indexterm>
+          <primary>wal_level</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>wal_level</option></term>
-
        <listitem>
-
-          <indexterm>
-            <primary>wal_level</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
            <option>wal_level</option> must be one of <option>replica</option> or <option>logical</option>
            (PostgreSQL 9.5 and earlier: one of <option>hot_standby</option> or <option>logical</option>).
@@ -128,15 +123,13 @@

      <varlistentry>

+        <indexterm>
+          <primary>max_wal_senders</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>max_wal_senders</option></term>
-
        <listitem>
-
-          <indexterm>
-            <primary>max_wal_senders</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
            <option>max_wal_senders</option> must be set to a value of <literal>2</literal> or greater.
            In general you will need one WAL sender for each standby which will attach to the PostgreSQL
@@ -148,33 +141,21 @@
            instances in the replication cluster which may potentially become a primary server or
            (in cascading replication) the upstream server of a standby.
          </para>
-         <para>
+          <para>
            PostgreSQL documentation: <ulink url="https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-MAX-WAL-SENDERS">max_wal_senders</ulink>.
          </para>
-          <note>
-            <para>
-              From <productname>PostgreSQL 12</productname>, <option>max_wal_senders</option>
-              <emphasis>must</emphasis> be set to the same or a higher value as the primary node
-              (at the time the node was cloned), otherwise the standby will refuse
-              to start (unless <option>hot_standby</option> is set to <literal>off</literal>, which
-              will prevent the node from accepting queries).
-            </para>
-          </note>
-
        </listitem>
      </varlistentry>

      <varlistentry>

+        <indexterm>
+          <primary>max_replication_slots</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>max_replication_slots</option></term>
-
        <listitem>
-
-          <indexterm>
-            <primary>max_replication_slots</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
            If you are intending to use replication slots, <option>max_replication_slots</option>
            must be set to a non-zero value.
@@ -193,20 +174,19 @@

      <varlistentry>

+        <indexterm>
+          <primary>wal_log_hints</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>wal_log_hints</option></term>
        <listitem>
-          <indexterm>
-            <primary>wal_log_hints</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
-
          <para>If you are intending to use <application>pg_rewind</application>,
            and the cluster was not initialised using data checksums, you may want to consider enabling
            <option>wal_log_hints</option>.
          </para>
          <para>
-            For more details see <xref linkend="repmgr-node-rejoin-pg-rewind"/>.
+            For more details see <xref linkend="repmgr-node-rejoin-pg-rewind">.
          </para>
          <para>
            PostgreSQL documentation: <ulink url="https://www.postgresql.org/docs/current/runtime-config-wal.html#GUC-WAL-LOG-HINTS">wal_log_hints</ulink>.
@@ -216,15 +196,13 @@

      <varlistentry>

+        <indexterm>
+          <primary>archive_mode</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>archive_mode</option></term>
-
        <listitem>
-
-          <indexterm>
-            <primary>archive_mode</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
            We suggest setting <option>archive_mode</option> to <literal>on</literal> (and
            <option>archive_command</option> to <literal>/bin/true</literal>; see below)
@@ -247,15 +225,13 @@

      <varlistentry>

+        <indexterm>
+          <primary>archive_command</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>
+
        <term><option>archive_command</option></term>
-
        <listitem>
-
-          <indexterm>
-            <primary>archive_command</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
            If you have set  <option>archive_mode</option> to <literal>on</literal> but are not currently planning
            to use WAL file archiving, set <option>archive_command</option> to a command which does nothing but returns
@@ -270,45 +246,32 @@

      <varlistentry>

-        <term><option>wal_keep_segments</option> / <option>wal_keep_size</option></term>
+        <indexterm>
+          <primary>wal_keep_segments</primary>
+          <secondary>PostgreSQL configuration</secondary>
+        </indexterm>

+        <term><option>wal_keep_segments</option></term>
        <listitem>
-
-          <indexterm>
-            <primary>wal_keep_segments</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
-
-          <indexterm>
-            <primary>wal_keep_size</primary>
-            <secondary>PostgreSQL configuration</secondary>
-          </indexterm>
-
          <para>
-            Normally there is no need to set <option>wal_keep_segments</option>
-            (PostgreSQL 13 and later: <varname>wal_keep_size</varname>; default: <literal>0</literal>),
-            as it is <emphasis>not</emphasis> a reliable way of ensuring that all required WAL
-            segments are available to standbys. Replication slots and/or an archiving solution
-            such as Barman are recommended to ensure standbys have a reliable
+            Normally there is no need to set <option>wal_keep_segments</option> (default: <literal>0</literal>), as it
+            is <emphasis>not</emphasis> a reliable way of ensuring that all required WAL segments are available to standbys.
+            Replication slots and/or an archiving solution such as Barman are recommended to ensure standbys have a reliable
            source of WAL segments at all times.
          </para>
          <para>
-            The only reason ever to set  <option>wal_keep_segments</option> / <option>wal_keep_size</option>
-            is you have you have configured <option>pg_basebackup_options</option>
+            The only reason ever to set  <option>wal_keep_segments</option> is you have
+            you have configured <option>pg_basebackup_options</option>
            in <filename>repmgr.conf</filename> to include the setting <literal>--wal-method=fetch</literal>
            (PostgreSQL 9.6 and earlier: <literal>--xlog-method=fetch</literal>)
            <emphasis>and</emphasis> you have <emphasis>not</emphasis> set <option>restore_command</option>
            in <filename>repmgr.conf</filename> to fetch WAL files from a reliable source such as Barman,
            in which case you'll need to set <option>wal_keep_segments</option>
            to a sufficiently high number to ensure that all WAL files required by the standby
-            are retained. However we do not recommend WAL retention in this way.
+            are retained. However we do not recommend managing replication in this way.
          </para>
          <para>
            PostgreSQL documentation: <ulink url="https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-WAL-KEEP-SEGMENTS">wal_keep_segments</ulink>.
-            <!--
-             PostgreSQL documentation: <ulink url="https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-WAL-KEEP-SIZE">wal_keep_size</ulink>.
-              -->
          </para>
        </listitem>
      </varlistentry>
@@ -326,10 +289,24 @@

  &configuration-file;
  &configuration-file-required-settings;
-  &configuration-file-optional-settings;
  &configuration-file-log-settings;
  &configuration-file-service-commands;
-  &configuration-permissions;
-  &configuration-password-management;

+  <sect1 id="configuration-permissions" xreflabel="Database user permissions">
+    <indexterm>
+      <primary>configuration</primary>
+      <secondary>database user permissions</secondary>
+    </indexterm>
+
+    <title>repmgr database user permissions</title>
+    <para>
+      &repmgr; will create an extension database containing objects
+      for administering &repmgr; metadata. The user defined in the <varname>conninfo</varname>
+      setting must be able to access all objects. Additionally, superuser permissions
+      are required to install the &repmgr; extension. The easiest way to do this
+      is create the &repmgr; user as a superuser, however if this is not
+      desirable, the &repmgr; user can be created as a normal user and a
+      superuser specified with <literal>--superuser</literal> when registering a &repmgr; node.
+    </para>
+  </sect1>
 </chapter>
--- a/doc/configuring-witness-server.sgml
+++ b/doc/configuring-witness-server.sgml
@@ -0,0 +1,93 @@
+<chapter id="using-witness-server">
+ <indexterm>
+  <primary>witness server</primary>
+ </indexterm>
+
+
+ <title>Using a witness server</title>
+ <para>
+   A <xref linkend="witness-server"> is a normal PostgreSQL instance which
+   is not part of the streaming replication cluster; its purpose is, if a
+   failover situation occurs, to provide proof that it is the primary server
+   itself which is unavailable, rather than e.g. a network split between
+   different physical locations.
+ </para>
+
+ <para>
+   A typical use case for a witness server is a two-node streaming replication
+   setup, where the primary and standby are in different locations (data centres).
+   By creating a witness server in the same location (data centre) as the primary,
+   if the primary becomes unavailable it's possible for the standby to decide whether
+   it can promote itself without risking a "split brain" scenario: if it can't see either the
+   witness or the primary server, it's likely there's a network-level interruption
+   and it should not promote itself. If it can see the witness but not the primary,
+   this proves there is no network interruption and the primary itself is unavailable,
+   and it can therefore promote itself (and ideally take action to fence the
+   former primary).
+ </para>
+ <note>
+   <para>
+     <emphasis>Never</emphasis> install a witness server on the same physical host
+     as another node in the replication cluster managed by &repmgr; - it's essential
+     the witness is not affected in any way by failure of another node.
+   </para>
+ </note>
+ <para>
+   For more complex replication scenarios,e.g. with multiple datacentres, it may
+   be preferable to use location-based failover, which ensures that only nodes
+   in the same location as the primary will ever be promotion candidates;
+   see <xref linkend="repmgrd-network-split"> for more details.
+ </para>
+
+ <note>
+   <simpara>
+     A witness server will only be useful if <application>repmgrd</application>
+     is in use.
+   </simpara>
+ </note>
+
+ <sect1 id="creating-witness-server">
+   <title>Creating a witness server</title>
+ <para>
+   To create a witness server, set up a normal PostgreSQL instance on a server
+   in the same physical location as the cluster's primary server.
+ </para>
+ <para>
+   This instance should <emphasis>not</emphasis> be on the same physical host as the primary server,
+   as otherwise if the primary server fails due to hardware issues, the witness
+   server will be lost too.
+ </para>
+ <note>
+   <simpara>
+     &repmgr; 3.3 and earlier provided a <command>repmgr create witness</command>
+     command, which would automatically create a PostgreSQL instance. However
+     this often resulted in an unsatisfactory, hard-to-customise instance.
+   </simpara>
+ </note>
+ <para>
+   The witness server should be configured in the same way as a normal
+   &repmgr; node; see section <xref linkend="configuration">.
+ </para>
+ <para>
+   Register the witness server with <xref linkend="repmgr-witness-register">.
+   This will create the &repmgr; extension on the witness server, and make
+   a copy of the &repmgr; metadata.
+ </para>
+ <note>
+   <simpara>
+    As the witness server is not part of the replication cluster, further
+    changes to the &repmgr; metadata will be synchronised by
+    <application>repmgrd</application>.
+   </simpara>
+ </note>
+ <para>
+   Once the witness server has been configured, <application>repmgrd</application>
+   should be started; for more details see <xref linkend="repmgrd-witness-server">.
+ </para>
+
+ <para>
+  To unregister a witness server, use <xref linkend="repmgr-witness-unregister">.
+ </para>
+
+ </sect1>
+</chapter>
--- a/doc/event-notifications.sgml
+++ b/doc/event-notifications.sgml
@@ -1,12 +1,12 @@
 <chapter id="event-notifications" xreflabel="event notifications">
- <title>Event Notifications</title>

 <indexterm>
   <primary>event notifications</primary>
 </indexterm>

+ <title>Event Notifications</title>
 <para>
-  Each time &repmgr; or &repmgrd; perform a significant event, a record
+  Each time &repmgr; or <application>repmgrd</application> perform a significant event, a record
  of that event is written into the <literal>repmgr.events</literal> table together with
  a timestamp, an indication of failure or success, and further details
  if appropriate. This is useful for gaining an overview of events
@@ -27,7 +27,7 @@
    (3 rows)</programlisting>
 </para>
 <para>
-  Alternatively, use <xref linkend="repmgr-cluster-event"/> to output a
+  Alternatively, use <xref linkend="repmgr-cluster-event"> to output a
  formatted list of events.
 </para>
 <para>
@@ -91,12 +91,12 @@
  may contain spaces, so should be quoted in the provided command
  configuration, e.g.:
  <programlisting>
-    event_notification_command='/path/to/some/script %n %e %s "%t" "%d"'</programlisting>
+    event_notification_command='/path/to/some/script %n %e %s "%t" "%d"'
+  </programlisting>
 </para>

 <para>
-   The following parameters are provided for a subset of event notifications; their meaning may
-   change according to context:
+   The following parameters are provided for a subset of event notifications:
 </para>

 <variablelist>
@@ -104,13 +104,10 @@
   <term><option>%p</option></term>
   <listitem>
    <para>
-     node ID of the current primary (<xref linkend="repmgr-standby-register"/> and <xref linkend="repmgr-standby-follow"/>)
+     node ID of the current primary (<xref linkend="repmgr-standby-register"> and <xref linkend="repmgr-standby-follow">)
    </para>
    <para>
-     node ID of the demoted primary (<xref linkend="repmgr-standby-switchover"/> only)
-    </para>
-    <para>
-     node ID of the former primary (<literal>repmgrd_failover_promote</literal> only)
+     node ID of the demoted primary (<xref linkend="repmgr-standby-switchover"> only)
    </para>
   </listitem>
  </varlistentry>
@@ -119,7 +116,11 @@
   <listitem>
    <para>
     <literal>conninfo</literal> string of the primary node
-     (<xref linkend="repmgr-standby-register"/> and <xref linkend="repmgr-standby-follow"/>)
+     (<xref linkend="repmgr-standby-register"> and <xref linkend="repmgr-standby-follow">)
+    </para>
+    <para>
+      <literal>conninfo</literal> string of the next available node
+      (<varname>bdr_failover</varname> and  <varname>bdr_recovery</varname>)
    </para>
   </listitem>
  </varlistentry>
@@ -128,7 +129,10 @@
   <term><option>%a</option></term>
   <listitem>
    <para>
-     name of the current primary node (<xref linkend="repmgr-standby-register"/> and <xref linkend="repmgr-standby-follow"/>)
+     name of the current primary node (<xref linkend="repmgr-standby-register"> and <xref linkend="repmgr-standby-follow">)
+    </para>
+    <para>
+     name of the next available node (<varname>bdr_failover</varname> and  <varname>bdr_recovery</varname>)
    </para>
   </listitem>
  </varlistentry>
@@ -137,16 +141,13 @@

 <para>
  The values provided for <literal>%c</literal> and <literal>%a</literal>
-  may contain spaces, so should always be quoted.
+  will probably contain spaces, so should always be quoted.
 </para>

 <para>
  By default, all notification types will be passed to the designated script;
  the notification types can be filtered to explicitly named ones using the
-  <varname>event_notifications</varname> parameter, e.g.:
-    <programlisting>
-    event_notifications='primary_register,standby_register,witness_register'</programlisting>
-
+  <varname>event_notifications</varname> parameter.
 </para>

 <para>
@@ -204,7 +205,7 @@
 </para>

 <para>
-   Events generated by &repmgrd; (streaming replication mode):
+   Events generated by <application>repmgrd</application> (streaming replication mode):

   <itemizedlist spacing="compact" mark="bullet">
   <listitem>
@@ -254,20 +255,29 @@
    <simpara><literal>standby_recovery</literal></simpara>
   </listitem>

+   </itemizedlist>
+ </para>
+
+  <para>
+   Events generated by <application>repmgrd</application> (BDR mode):
+   <itemizedlist spacing="compact" mark="bullet">
   <listitem>
-     <simpara><literal><link linkend="repmgrd-primary-child-disconnection-events">child_node_disconnect</link></literal></simpara>
+    <simpara><literal>bdr_failover</literal></simpara>
   </listitem>
   <listitem>
-     <simpara><literal><link linkend="repmgrd-primary-child-disconnection-events">child_node_reconnect</link></literal></simpara>
+    <simpara><literal>bdr_reconnect</literal></simpara>
   </listitem>
   <listitem>
-     <simpara><literal><link linkend="repmgrd-primary-child-disconnection-events">child_node_new_connect</link></literal></simpara>
+    <simpara><literal>bdr_recovery</literal></simpara>
   </listitem>
   <listitem>
-     <simpara><literal><link linkend="repmgrd-primary-child-disconnection-events">child_nodes_disconnect_command</link></literal></simpara>
+    <simpara><literal>bdr_register</literal></simpara>
+   </listitem>
+   <listitem>
+    <simpara><literal>bdr_unregister</literal></simpara>
   </listitem>

-   </itemizedlist>
+  </itemizedlist>
 </para>

 <para>
--- a/doc/filelist.sgml
+++ b/doc/filelist.sgml
@@ -0,0 +1,91 @@
+<!-- doc/filelist.sgml -->
+
+<!ENTITY legal      SYSTEM "legal.sgml">
+
+<!ENTITY bookindex  SYSTEM "bookindex.sgml">
+
+<!--
+ Some parts of the documentation are also source for some plain-text
+ files used during installation.  To selectively ignore or include
+ some parts (e.g., external xref's) when generating these files we use
+ these parameter entities.  See also standalone-install.sgml.
+ -->
+<!ENTITY % standalone-ignore  "INCLUDE">
+<!ENTITY % standalone-include "IGNORE">
+
+<!-- doc/filelist.sgml -->
+
+<!--
+ By default, no index is included.  Use -i include-index on the command line
+ to include it.
+ -->
+<!ENTITY % include-index "IGNORE">
+
+<!--
+ Create empty index element for processing by XSLT stylesheet.
+ -->
+<!ENTITY % include-xslt-index "IGNORE">
+
+<!--
+ Include external documentation sections
+ -->
+
+<!ENTITY overview      SYSTEM "overview.sgml">
+<!ENTITY install SYSTEM "install.sgml">
+<!ENTITY install-requirements      SYSTEM "install-requirements.sgml">
+<!ENTITY install-packages      SYSTEM "install-packages.sgml">
+<!ENTITY install-source      SYSTEM "install-source.sgml">
+<!ENTITY quickstart      SYSTEM "quickstart.sgml">
+<!ENTITY configuration      SYSTEM "configuration.sgml">
+<!ENTITY configuration-file      SYSTEM "configuration-file.sgml">
+<!ENTITY configuration-file-required-settings      SYSTEM "configuration-file-required-settings.sgml">
+<!ENTITY configuration-file-log-settings      SYSTEM "configuration-file-log-settings.sgml">
+<!ENTITY configuration-file-service-commands   SYSTEM "configuration-file-service-commands.sgml">
+<!ENTITY cloning-standbys  SYSTEM "cloning-standbys.sgml">
+<!ENTITY promoting-standby  SYSTEM "promoting-standby.sgml">
+<!ENTITY follow-new-primary  SYSTEM "follow-new-primary.sgml">
+<!ENTITY switchover  SYSTEM "switchover.sgml">
+<!ENTITY configuring-witness-server SYSTEM "configuring-witness-server.sgml">
+
+<!ENTITY event-notifications  SYSTEM "event-notifications.sgml">
+<!ENTITY upgrading-repmgr  SYSTEM "upgrading-repmgr.sgml">
+
+<!ENTITY repmgrd-overview SYSTEM "repmgrd-overview.sgml">
+<!ENTITY repmgrd-automatic-failover SYSTEM "repmgrd-automatic-failover.sgml">
+<!ENTITY repmgrd-configuration SYSTEM "repmgrd-configuration.sgml">
+<!ENTITY repmgrd-operation SYSTEM "repmgrd-operation.sgml">
+<!ENTITY repmgrd-bdr SYSTEM "repmgrd-bdr.sgml">
+
+<!ENTITY repmgr-primary-register SYSTEM "repmgr-primary-register.sgml">
+<!ENTITY repmgr-primary-unregister SYSTEM "repmgr-primary-unregister.sgml">
+<!ENTITY repmgr-standby-clone SYSTEM "repmgr-standby-clone.sgml">
+<!ENTITY repmgr-standby-register SYSTEM "repmgr-standby-register.sgml">
+<!ENTITY repmgr-standby-unregister SYSTEM "repmgr-standby-unregister.sgml">
+<!ENTITY repmgr-standby-promote SYSTEM "repmgr-standby-promote.sgml">
+<!ENTITY repmgr-standby-follow SYSTEM "repmgr-standby-follow.sgml">
+<!ENTITY repmgr-standby-switchover SYSTEM "repmgr-standby-switchover.sgml">
+<!ENTITY repmgr-witness-register SYSTEM "repmgr-witness-register.sgml">
+<!ENTITY repmgr-witness-unregister SYSTEM "repmgr-witness-unregister.sgml">
+<!ENTITY repmgr-node-status SYSTEM "repmgr-node-status.sgml">
+<!ENTITY repmgr-node-check SYSTEM "repmgr-node-check.sgml">
+<!ENTITY repmgr-node-rejoin SYSTEM "repmgr-node-rejoin.sgml">
+<!ENTITY repmgr-node-service SYSTEM "repmgr-node-service.sgml">
+<!ENTITY repmgr-cluster-show SYSTEM "repmgr-cluster-show.sgml">
+<!ENTITY repmgr-cluster-matrix SYSTEM "repmgr-cluster-matrix.sgml">
+<!ENTITY repmgr-cluster-crosscheck SYSTEM "repmgr-cluster-crosscheck.sgml">
+<!ENTITY repmgr-cluster-event SYSTEM "repmgr-cluster-event.sgml">
+<!ENTITY repmgr-cluster-cleanup SYSTEM "repmgr-cluster-cleanup.sgml">
+<!ENTITY repmgr-daemon-status SYSTEM "repmgr-daemon-status.sgml">
+<!ENTITY repmgr-daemon-start SYSTEM "repmgr-daemon-start.sgml">
+<!ENTITY repmgr-daemon-stop SYSTEM "repmgr-daemon-stop.sgml">
+<!ENTITY repmgr-daemon-pause SYSTEM "repmgr-daemon-pause.sgml">
+<!ENTITY repmgr-daemon-unpause SYSTEM "repmgr-daemon-unpause.sgml">
+
+<!ENTITY appendix-release-notes  SYSTEM "appendix-release-notes.sgml">
+<!ENTITY appendix-faq      SYSTEM "appendix-faq.sgml">
+<!ENTITY appendix-signatures      SYSTEM "appendix-signatures.sgml">
+<!ENTITY appendix-packages      SYSTEM "appendix-packages.sgml">
+<!ENTITY appendix-support SYSTEM "appendix-support.sgml">
+
+<!ENTITY bookindex  SYSTEM "bookindex.sgml">
+
--- a/doc/filelist.xml
+++ b/doc/filelist.xml
@@ -1,71 +0,0 @@
-<!-- doc/filelist.xml -->
-
-<!ENTITY legal      SYSTEM "legal.xml">
-
-<!ENTITY bookindex  SYSTEM "bookindex.xml">
-
-
-<!--
- Include external documentation sections
- -->
-
-<!ENTITY overview      SYSTEM "overview.xml">
-<!ENTITY install SYSTEM "install.xml">
-<!ENTITY install-requirements      SYSTEM "install-requirements.xml">
-<!ENTITY install-packages      SYSTEM "install-packages.xml">
-<!ENTITY install-source      SYSTEM "install-source.xml">
-<!ENTITY quickstart      SYSTEM "quickstart.xml">
-<!ENTITY configuration      SYSTEM "configuration.xml">
-<!ENTITY configuration-file      SYSTEM "configuration-file.xml">
-<!ENTITY configuration-file-required-settings      SYSTEM "configuration-file-required-settings.xml">
-<!ENTITY configuration-file-optional-settings      SYSTEM "configuration-file-optional-settings.xml">
-<!ENTITY configuration-file-log-settings      SYSTEM "configuration-file-log-settings.xml">
-<!ENTITY configuration-file-service-commands   SYSTEM "configuration-file-service-commands.xml">
-<!ENTITY configuration-permissions   SYSTEM "configuration-permissions.xml">
-<!ENTITY configuration-password-management   SYSTEM "configuration-password-management.xml">
-<!ENTITY cloning-standbys  SYSTEM "cloning-standbys.xml">
-<!ENTITY promoting-standby  SYSTEM "promoting-standby.xml">
-<!ENTITY follow-new-primary  SYSTEM "follow-new-primary.xml">
-<!ENTITY switchover  SYSTEM "switchover.xml">
-
-<!ENTITY event-notifications  SYSTEM "event-notifications.xml">
-<!ENTITY upgrading-repmgr  SYSTEM "upgrading-repmgr.xml">
-
-<!ENTITY repmgrd-overview SYSTEM "repmgrd-overview.xml">
-<!ENTITY repmgrd-automatic-failover SYSTEM "repmgrd-automatic-failover.xml">
-<!ENTITY repmgrd-configuration SYSTEM "repmgrd-configuration.xml">
-<!ENTITY repmgrd-operation SYSTEM "repmgrd-operation.xml">
-
-<!ENTITY repmgr-primary-register SYSTEM "repmgr-primary-register.xml">
-<!ENTITY repmgr-primary-unregister SYSTEM "repmgr-primary-unregister.xml">
-<!ENTITY repmgr-standby-clone SYSTEM "repmgr-standby-clone.xml">
-<!ENTITY repmgr-standby-register SYSTEM "repmgr-standby-register.xml">
-<!ENTITY repmgr-standby-unregister SYSTEM "repmgr-standby-unregister.xml">
-<!ENTITY repmgr-standby-promote SYSTEM "repmgr-standby-promote.xml">
-<!ENTITY repmgr-standby-follow SYSTEM "repmgr-standby-follow.xml">
-<!ENTITY repmgr-standby-switchover SYSTEM "repmgr-standby-switchover.xml">
-<!ENTITY repmgr-witness-register SYSTEM "repmgr-witness-register.xml">
-<!ENTITY repmgr-witness-unregister SYSTEM "repmgr-witness-unregister.xml">
-<!ENTITY repmgr-node-status SYSTEM "repmgr-node-status.xml">
-<!ENTITY repmgr-node-check SYSTEM "repmgr-node-check.xml">
-<!ENTITY repmgr-node-rejoin SYSTEM "repmgr-node-rejoin.xml">
-<!ENTITY repmgr-node-service SYSTEM "repmgr-node-service.xml">
-<!ENTITY repmgr-cluster-show SYSTEM "repmgr-cluster-show.xml">
-<!ENTITY repmgr-cluster-matrix SYSTEM "repmgr-cluster-matrix.xml">
-<!ENTITY repmgr-cluster-crosscheck SYSTEM "repmgr-cluster-crosscheck.xml">
-<!ENTITY repmgr-cluster-event SYSTEM "repmgr-cluster-event.xml">
-<!ENTITY repmgr-cluster-cleanup SYSTEM "repmgr-cluster-cleanup.xml">
-<!ENTITY repmgr-service-status SYSTEM "repmgr-service-status.xml">
-<!ENTITY repmgr-service-pause SYSTEM "repmgr-service-pause.xml">
-<!ENTITY repmgr-service-unpause SYSTEM "repmgr-service-unpause.xml">
-<!ENTITY repmgr-daemon-start SYSTEM "repmgr-daemon-start.xml">
-<!ENTITY repmgr-daemon-stop SYSTEM "repmgr-daemon-stop.xml">
-
-<!ENTITY appendix-release-notes  SYSTEM "appendix-release-notes.xml">
-<!ENTITY appendix-faq      SYSTEM "appendix-faq.xml">
-<!ENTITY appendix-signatures      SYSTEM "appendix-signatures.xml">
-<!ENTITY appendix-packages      SYSTEM "appendix-packages.xml">
-<!ENTITY appendix-support SYSTEM "appendix-support.xml">
-
-<!ENTITY bookindex  SYSTEM "bookindex.xml">
-
--- a/doc/follow-new-primary.sgml
+++ b/doc/follow-new-primary.sgml
@@ -1,19 +1,18 @@
 <chapter id="follow-new-primary">
- <title>Following a new primary</title>
-
 <indexterm>
  <primary>Following a new primary</primary>
  <seealso>repmgr standby follow</seealso>
 </indexterm>

+ <title>Following a new primary</title>
 <para>
   Following the failure or removal of the replication cluster's existing primary
-   server, <xref linkend="repmgr-standby-follow"/> can be used to make &quot;orphaned&quot; standbys
+   server, <xref linkend="repmgr-standby-follow"> can be used to make 'orphaned' standbys
   follow the new primary and catch up to its current state.
 </para>
 <para>
  To demonstrate this, assuming a replication cluster in the same state as the
-  end of the preceding section (<xref linkend="promoting-standby"/>),
+  end of the preceding section (<xref linkend="promoting-standby">),
  execute this:
  <programlisting>
    $ repmgr -f /etc/repmgr.conf standby follow
--- a/doc/install-packages.sgml
+++ b/doc/install-packages.sgml
@@ -13,30 +13,22 @@

 <sect2 id="installation-packages-redhat" xreflabel="Installing from packages on RHEL, CentOS and Fedora">

-  <title>RedHat/CentOS/Fedora</title>
-
  <indexterm>
   <primary>installation</primary>
   <secondary>on Red Hat/CentOS/Fedora etc.</secondary>
  </indexterm>

+  <title>RedHat/CentOS/Fedora</title>
  <para>
 	&repmgr; RPM packages for RedHat/CentOS variants and Fedora are available from the
-	<ulink url="https://www.enterprisedb.com">EDB</ulink>
-	<ulink url="https://dl.enterprisedb.com/">public repository</ulink>; see following
+	<ulink url="https://2ndquadrant.com">2ndQuadrant</ulink>
+	<ulink url="https://dl.2ndquadrant.com/">public repository</ulink>; see following
 	section for details.
  </para>
-  <note>
-    <para>
-      Currently the <ulink url="https://www.enterprisedb.com">EDB</ulink>
-	  <ulink url="https://dl.enterprisedb.com/">public repository</ulink> provides
-      support for RedHat/CentOS versions 6,7 and 8.
-    </para>
-  </note>
  <para>
   RPM packages for &repmgr; are also available via Yum through
-   the PostgreSQL Global Development Group (PGDG) RPM repository
-   (<ulink url="https://yum.postgresql.org/">https://yum.postgresql.org/</ulink>).
+   the PostgreSQL Global Development Group RPM repository
+   (<ulink url="https://yum.postgresql.org/">http://yum.postgresql.org/</ulink>).
   Follow the instructions for your distribution (RedHat, CentOS,
   Fedora, etc.) and architecture as detailed there. Note that it can take some days
   for new &repmgr; packages to become available via the this repository.
@@ -44,35 +36,31 @@
  <note>
    <para>
      &repmgr; RPM packages are designed to be compatible with the community-provided PostgreSQL packages
-      and EDB's PostgreSQL Extended Server (formerly 2ndQPostgres).
+      and 2ndQuadrant's <ulink url="https://www.2ndquadrant.com/en/resources/2ndqpostgres/">2ndQPostgres</ulink>.
      They may not work with vendor-specific packages such as those provided by RedHat for RHEL
      customers, as the PostgreSQL filesystem layout may be different to the community RPMs.
      Please contact your support vendor for assistance.
    </para>
-    <para>
-      See also <link linkend="appendix-faq">FAQ</link> entry
-      <xref linkend="faq-third-party-packages"/>.
-    </para>
  </note>

  <para>
    For more information on the package contents, including details of installation
    paths and relevant <link linkend="configuration-file-service-commands">service commands</link>,
-    see the appendix section <xref linkend="packages-centos"/>.
+    see the appendix section <xref linkend="packages-centos">.
  </para>


  <sect3 id="installation-packages-redhat-2ndq">
-    <title>EDB public RPM yum repository</title>
+    <title>2ndQuadrant public RPM yum repository</title>

    <para>
-      <ulink url="https://www.enterprisedb.com/">EDB</ulink> provides a dedicated <literal>yum</literal>
-      <ulink url="https://dl.enterprisedb.com/">public repository</ulink> for EDB software,
+      <ulink url="https://2ndquadrant.com/">2ndQuadrant</ulink> provides a dedicated <literal>yum</literal>
+      <ulink url="https://dl.2ndquadrant.com/">public repository</ulink> for 2ndQuadrant software,
      including &repmgr;. We recommend using this for all future &repmgr; releases.
    </para>
    <para>
      General instructions for using this repository can be found on its
-      <ulink url="https://dl.enterprisedb.com/">homepage</ulink>. Specific instructions
+      <ulink url="https://dl.2ndquadrant.com/">homepage</ulink>. Specific instructions
      for installing &repmgr; follow below.
    </para>
    <para>
@@ -82,46 +70,57 @@
 	<listitem>
 	  <para>
 	    Locate the repository RPM for your PostgreSQL version from the list at:
-	    <ulink url="https://dl.enterprisedb.com/">https://dl.enterprisedb.com/</ulink>
-	  </para>
-	</listitem>
-
-    <listitem>
-      <para>
-        Install the repository definition for your distribution and PostgreSQL version
-	    (this enables the EDB repository as a source of &repmgr; packages).
-	  </para>
-	  <para>
-	    For example, for PostgreSQL 14 on Rocky Linux 8, execute:
-	    <programlisting>
-curl https://dl.enterprisedb.com/default/release/get/14/rpm | sudo bash</programlisting>
-	  </para>
-
-	  <para>
-	    Verify that the repository is installed with:
-	    <programlisting>
-sudo dnf repolist</programlisting>
-	    The output should contain two entries like this:
-	    <programlisting>
-2ndquadrant-dl-default-release-pg14                  2ndQuadrant packages (PG14) for 8 - x86_64
-2ndquadrant-dl-default-release-pg14-debug            2ndQuadrant packages (PG14) for 8 - x86_64 - Debug</programlisting>
+	    <ulink url="https://dl.2ndquadrant.com/">https://dl.2ndquadrant.com/</ulink>
 	  </para>
 	</listitem>

        <listitem>
          <para>
-            Install the &repmgr; version appropriate for your PostgreSQL version (e.g. <literal>repmgr14</literal>):
+            Install the repository definition for your distribution and PostgreSQL version
+	    (this enables the 2ndQuadrant repository as a source of &repmgr; packages).
+	  </para>
+	  <para>
+	    For example, for PostgreSQL 10 on CentOS, execute:
+	    <programlisting>
+curl https://dl.2ndquadrant.com/default/release/get/10/rpm | sudo bash</programlisting>
+	  </para>
+
+	  <para>
+	    For PostgreSQL 9.6 on CentOS, execute:
+	    <programlisting>
+curl https://dl.2ndquadrant.com/default/release/get/9.6/rpm | sudo bash</programlisting>
+	  </para>
+
+
+	  <para>
+	    Verify that the repository is installed with:
+	    <programlisting>
+sudo yum repolist</programlisting>
+	    The output should contain two entries like this:
+	    <programlisting>
+2ndquadrant-dl-default-release-pg10/7/x86_64        2ndQuadrant packages (PG10) for 7 - x86_64          4
+2ndquadrant-dl-default-release-pg10-debug/7/x86_64  2ndQuadrant packages (PG10) for 7 - x86_64 - Debug  3</programlisting>
+	  </para>
+	</listitem>
+
+        <listitem>
+          <para>
+            Install the &repmgr version appropriate for your PostgreSQL version (e.g. <literal>repmgr10</literal>):
            <programlisting>
-sudo dnf install repmgr14</programlisting>
+sudo yum install repmgr10</programlisting>
          </para>
+          <note>
+            <para>
+              For packages for PostgreSQL 9.6 and earlier, the package name does not contain
+              a period between major and minor version numbers, e.g.
+              <literal>repmgr96</literal>.
+            </para>
+          </note>
          <tip>
            <para>
              To determine the names of available packages, execute:
              <programlisting>
-dnf search repmgr</programlisting>
-            </para>
-            <para>
-              In CentOS 7 and earlier, use <literal>yum</literal> instead of <literal>dnf</literal>.
+yum search repmgr</programlisting>
            </para>
          </tip>

@@ -133,7 +132,7 @@ dnf search repmgr</programlisting>
      <emphasis>Compatibility with PGDG Repositories</emphasis>
    </para>
    <para>
-      The EDB &repmgr; yum repository packages use the same definitions and file system layout as the
+      The 2ndQuadrant &repmgr; yum repository packages use the same definitions and file system layout as the
      main PGDG repository.
    </para>
    <para>
@@ -142,42 +141,32 @@ dnf search repmgr</programlisting>
      the packages are installed from.
    </para>
    <para>
-      To ensure the EDB repository is always prioritised, set the <literal>priority</literal> option
-      in the repository configuration file (e.g. <filename>/etc/yum.repos.d/2ndquadrant-dl-default-release-pg14.repo</filename>
-      accordingly.
+      To ensure the 2ndQuadrant repository is always prioritised, install <literal>yum-plugin-priorities</literal>
+      and set the repository priorities accordingly.
    </para>
-    <note>
-      <para>
-        With CentOS 7 and earlier, the package <literal>yum-plugin-priorities</literal> must be installed
-        to be able to set the repository priority.
-      </para>
-    </note>

    <para>
      <emphasis>Installing a specific package version</emphasis>
    </para>
    <para>
-      To install a specific package version, execute <command>dnf --showduplicates list</command>
+      To install a specific package version, execute <command>yum --showduplicates list</command>
      for the package in question:
      <programlisting>
-[root@localhost ~]# dnf --showduplicates list repmgr10
-Last metadata expiration check: 0:09:15 ago on Fri 11 Mar 2022 01:09:19 AM UTC.
-Installed Packages
-repmgr10.x86_64                            5.3.1-1.el8                              @2ndquadrant-dl-default-release-pg10
-Available Packages
-repmgr10.x86_64                            5.0.0-1.rhel8                            pgdg10
-repmgr10.x86_64                            5.1.0-1.el8                              2ndquadrant-dl-default-release-pg10
-repmgr10.x86_64                            5.1.0-1.rhel8                            pgdg10
-repmgr10.x86_64                            5.1.0-2.el8                              2ndquadrant-dl-default-release-pg10
-repmgr10.x86_64                            5.2.0-1.el8                              2ndquadrant-dl-default-release-pg10
-repmgr10.x86_64                            5.2.0-1.rhel8                            pgdg10
-repmgr10.x86_64                            5.2.1-1.el8                              2ndquadrant-dl-default-release-pg10
-repmgr10.x86_64                            5.3.0-1.el8                              2ndquadrant-dl-default-release-pg10
-repmgr10.x86_64                            5.3.1-1.el8                              2ndquadrant-dl-default-release-pg10</programlisting>
+        [root@localhost ~]# yum --showduplicates list repmgr10
+        Loaded plugins: fastestmirror
+        Loading mirror speeds from cached hostfile
+         * base: ftp.iij.ad.jp
+         * extras: ftp.iij.ad.jp
+         * updates: ftp.iij.ad.jp
+        Available Packages
+		repmgr10.x86_64                       4.0.3-1.rhel7                        pgdg10
+		repmgr10.x86_64                       4.0.4-1.rhel7                        pgdg10
+		repmgr10.x86_64                       4.0.5-1.el7                          2ndquadrant-repo-10</programlisting>
      then append the appropriate version number to the package name with a hyphen, e.g.:
      <programlisting>
-[root@localhost ~]# dnf install repmgr10-5.3.0-1.el8</programlisting>
+        [root@localhost ~]# yum install repmgr10-4.0.3-1.rhel7</programlisting>
    </para>
+
    <para>
      <emphasis>Installing old packages</emphasis>
    </para>
@@ -185,41 +174,41 @@ repmgr10.x86_64                            5.3.1-1.el8
      See appendix <link linkend="packages-old-versions-rhel-centos">Installing old package versions</link>
      for details on how to retrieve older package versions.
    </para>
+
  </sect3>

 </sect2>

 <sect2 id="installation-packages-debian" xreflabel="Installing from packages on Debian or Ubuntu">

-  <title>Debian/Ubuntu</title>
-
  <indexterm>
   <primary>installation</primary>
   <secondary>on Debian/Ubuntu etc.</secondary>
  </indexterm>

+  <title>Debian/Ubuntu</title>
  <para>.deb packages for &repmgr; are available from the
-  PostgreSQL Community APT repository (<ulink url="https://apt.postgresql.org/">https://apt.postgresql.org/</ulink>).
+  PostgreSQL Community APT repository (<ulink url="http://apt.postgresql.org/">http://apt.postgresql.org/</ulink>).
  Instructions can be found in the APT section of the PostgreSQL Wiki
  (<ulink url="https://wiki.postgresql.org/wiki/Apt">https://wiki.postgresql.org/wiki/Apt</ulink>).
  </para>
  <para>
    For more information on the package contents, including details of installation
    paths and relevant <link linkend="configuration-file-service-commands">service commands</link>,
-    see the appendix section <xref linkend="packages-debian-ubuntu"/>.
+    see the appendix section <xref linkend="packages-debian-ubuntu">.
  </para>

  <sect3 id="installation-packages-debian-ubuntu-2ndq">
-    <title>EDB public apt repository for Debian/Ubuntu</title>
+    <title>2ndQuadrant public apt repository for Debian/Ubuntu</title>

    <para>
-      <ulink url="https://www.enterprisedb.com/">EDB</ulink> provides a
-      <ulink url="https://dl.enterprisedb.com/">public apt repository</ulink> for EDB software,
+      <ulink url="https://2ndquadrant.com/">2ndQuadrant</ulink> provides a
+      <ulink url="https://dl.2ndquadrant.com/">public apt repository</ulink> for 2ndQuadrant software,
      including &repmgr;.
    </para>
    <para>
      General instructions for using this repository can be found on its
-      <ulink url="https://dl.enterprisedb.com/">homepage</ulink>. Specific instructions
+      <ulink url="https://dl.2ndquadrant.com/">homepage</ulink>. Specific instructions
      for installing &repmgr; follow below.
    </para>

@@ -229,13 +218,13 @@ repmgr10.x86_64                            5.3.1-1.el8

      <itemizedlist>

-	    <listitem>
-	      <para>
+	<listitem>
+	  <para>
            Install the repository definition for your distribution and PostgreSQL version
-	        (this enables the EDB repository as a source of &repmgr; packages) by executing:
+	    (this enables the 2ndQuadrant repository as a source of &repmgr; packages) by executing:
            <programlisting>
-              curl https://dl.enterprisedb.com/default/release/get/deb | sudo bash</programlisting>
-	      </para>
+curl https://dl.2ndquadrant.com/default/release/get/deb | sudo bash</programlisting>
+	  </para>
          <note>
            <para>
              This will automatically install the following additional packages, if not already present:
@@ -251,20 +240,20 @@ repmgr10.x86_64                            5.3.1-1.el8
          </note>
        </listitem>

-	    <listitem>
-	      <para>
-            Install the &repmgr; version appropriate for your PostgreSQL version (e.g. <literal>repmgr11</literal>):
+	<listitem>
+	  <para>
+            Install the &repmgr version appropriate for your PostgreSQL version (e.g. <literal>repmgr10</literal>):
            <programlisting>
-              sudo apt-get install postgresql-11-repmgr</programlisting>
-	      </para>
+sudo apt-get install postgresql-10-repmgr</programlisting>
+	  </para>
          <note>
            <para>
-              For packages for PostgreSQL 9.6 and earlier, the package name includes
-              a period between major and minor version numbers, e.g.
-              <literal>postgresql-9.6-repmgr</literal>.
+            For packages for PostgreSQL 9.6 and earlier, the package name includes
+            a period between major and minor version numbers, e.g.
+            <literal>postgresql-9.6-repmgr</literal>.
            </para>
          </note>
-	    </listitem>
+	</listitem>

      </itemizedlist>

--- a/doc/install-requirements.sgml
+++ b/doc/install-requirements.sgml
@@ -1,12 +1,11 @@
 <sect1 id="install-requirements" xreflabel="installation requirements">

-  <title>Requirements for installing repmgr</title>
-
  <indexterm>
   <primary>installation</primary>
   <secondary>requirements</secondary>
  </indexterm>

+  <title>Requirements for installing repmgr</title>
  <para>
    repmgr is developed and tested on Linux and OS X, but should work on any
    UNIX-like system supported by PostgreSQL itself. There is no support for
@@ -14,14 +13,14 @@
  </para>

  <para>
-   &repmgr; &repmgrversion; is compatible with all PostgreSQL versions from 9.4. See
+   &repmgr; 4.x is compatible with all PostgreSQL versions from 9.3. See
   section <link linkend="install-compatibility-matrix">&repmgr; compatibility matrix</link>
   for an overview of version compatibility.
  </para>

  <note>
   <simpara>
-    If upgrading from &repmgr; 3.x, please see the section <xref linkend="upgrading-from-repmgr-3"/>.
+    If upgrading from &repmgr; 3.x, please see the section <xref linkend="upgrading-from-repmgr-3">.
   </simpara>
  </note>

@@ -39,21 +38,21 @@

  <note>
   <simpara>
-     The same &quot;major&quot; &repmgr; version (e.g. <literal>&repmgrversion;.x</literal>) <emphasis>must</emphasis>
+     The same &quot;major&quot; &repmgr; version (e.g. <literal>4.2.x</literal>) <emphasis>must</emphasis>
     be installed on all node in the replication cluster. We strongly recommend keeping all
     nodes on the same (preferably latest) &quot;minor&quot; &repmgr; version to minimize the risk
     of incompatibilities.
   </simpara>
   <simpara>
-     If different &quot;major&quot; &repmgr; versions (e.g. 4.1.x and &repmgrversion;.x)
-     are installed on different nodes, in the best case &repmgr; (in particular &repmgrd;)
+     If different &quot;major&quot; &repmgr; versions (e.g. 3.3.x and 4.1.x)
+     are installed on different nodes, in the best case &repmgr; (in particular <application>repmgrd</application>)
     will not run. In the worst case, you will end up with a broken cluster.
   </simpara>
  </note>

  <para>
   A dedicated system user for &repmgr; is <emphasis>not</emphasis> required; as many &repmgr; and
-   &repmgrd; actions require direct access to the PostgreSQL data directory,
+   <application>repmgrd</application> actions require direct access to the PostgreSQL data directory,
   these commands should be executed by the <literal>postgres</literal> user.
  </para>

@@ -73,8 +72,6 @@

  <sect2 id="install-compatibility-matrix">

-    <title>&repmgr; compatibility matrix</title>
-
    <indexterm>
      <primary>repmgr</primary>
      <secondary>compatibility matrix</secondary>
@@ -84,6 +81,7 @@
      <primary>compatibility matrix</primary>
    </indexterm>

+    <title>&repmgr; compatibility matrix</title>
    <para>
      The following table provides an overview of which &repmgr; version supports
      which PostgreSQL version.
@@ -93,171 +91,56 @@
    <table id="repmgr-compatibility-matrix">
      <title>&repmgr; compatibility matrix</title>

-      <tgroup cols="4">
+      <tgroup cols="2">
        <thead>
          <row>
            <entry>
              &repmgr; version
            </entry>
-            <entry>
-              Supported?
-            </entry>
            <entry>
              Latest release
            </entry>
            <entry>
              Supported PostgreSQL versions
            </entry>
-            <entry>
-              Notes
-            </entry>
          </row>
        </thead>

        <tbody>
-          <row>
-            <entry>
-              &repmgr; 5.4
-            </entry>
-            <entry>
-              (dev)
-            </entry>
-            <entry>
-              <link linkend="release-current">&repmgrversion;</link> (&releasedate;)
-            </entry>
-            <entry>
-              9.4, 9.5, 9.6, 10, 11, 12, 13, 15
-            </entry>
-            <entry>
-              &nbsp;
-            </entry>
-          </row>
-
-          <row>
-            <entry>
-              &repmgr; 5.3
-            </entry>
-            <entry>
-              YES
-            </entry>
-            <entry>
-              <link linkend="release-current">&repmgrversion;</link> (&releasedate;)
-            </entry>
-            <entry>
-              9.4, 9.5, 9.6, 10, 11, 12, 13, 14, 15
-            </entry>
-            <entry>
-              PostgreSQL 15 supported from &repmgr; 5.3.3
-            </entry>
-          </row>
-
-          <row>
-            <entry>
-              &repmgr; 5.2
-            </entry>
-            <entry>
-              NO
-            </entry>
-            <entry>
-              <link linkend="release-5.2.1">5.2.1</link> (2020-12-07)
-            </entry>
-            <entry>
-              9.4, 9.5, 9.6, 10, 11, 12, 13
-            </entry>
-            <entry>
-              &nbsp;
-            </entry>
-          </row>
-
-          <row>
-            <entry>
-              &repmgr; 5.1
-            </entry>
-            <entry>
-              NO
-            </entry>
-            <entry>
-              <link linkend="release-5.1.0">5.1.0</link> (2020-04-13)
-            </entry>
-            <entry>
-              9.3, 9.4, 9.5, 9.6, 10, 11, 12
-            </entry>
-            <entry>
-              &nbsp;
-            </entry>
-          </row>
-
-          <row>
-            <entry>
-              &repmgr; 5.0
-            </entry>
-            <entry>
-              NO
-            </entry>
-            <entry>
-              <link linkend="release-5.0">5.0</link> (2019-10-15)
-            </entry>
-            <entry>
-              9.3, 9.4, 9.5, 9.6, 10, 11, 12
-            </entry>
-            <entry>
-              &nbsp;
-            </entry>
-          </row>
-
-
          <row>
            <entry>
              &repmgr; 4.x
            </entry>
            <entry>
-              NO
-            </entry>
-            <entry>
-              <link linkend="release-4.4">4.4</link> (2019-06-27)
+              <link linkend="release-4.2">4.2</link> (2018-10-24)
            </entry>
            <entry>
              9.3, 9.4, 9.5, 9.6, 10, 11
            </entry>
-            <entry>
-              &nbsp;
-            </entry>
          </row>

          <row>
            <entry>
              &repmgr; 3.x
            </entry>
-            <entry>
-              NO
-            </entry>
            <entry>
              <ulink url="https://repmgr.org/release-notes-3.3.2.html">3.3.2</ulink> (2017-05-30)
            </entry>
            <entry>
              9.3, 9.4, 9.5, 9.6
            </entry>
-            <entry>
-              &nbsp;
-            </entry>
          </row>

          <row>
            <entry>
              &repmgr; 2.x
            </entry>
-            <entry>
-              NO
-            </entry>
            <entry>
              <ulink url="https://repmgr.org/release-notes-2.0.3.html">2.0.3</ulink> (2015-04-16)
            </entry>
            <entry>
              9.0, 9.1, 9.2, 9.3, 9.4
            </entry>
-            <entry>
-              &nbsp;
-            </entry>
          </row>
        </tbody>

@@ -269,61 +152,28 @@
        The &repmgr; 2.x and 3.x series are no longer maintained or supported.
        We strongly recommend  upgrading to the latest &repmgr; version.
      </para>
-      <para>
-        Following the release of &repmgr; 5.0, there will be no further releases of
-        the &repmgr; 4.x series. Note that &repmgr; 5.x is an incremental development
-        of the 4.x series and &repmgr; 4.x users should upgrade to this as soon as possible.
-      </para>
    </important>

-  </sect2>
-
-  <sect2 id="install-postgresql-93-94">
-
-    <title>PostgreSQL 9.4 support</title>
-
-    <indexterm>
-      <primary>PostgreSQL 9.4</primary>
-      <secondary>repmgr support</secondary>
-    </indexterm>

    <para>
-      Note that some &repmgr; functionality is not available in PostgreSQL 9.4:
+      Note that some &repmgr; functionality is not available in PostgreSQL 9.3 and PostgreSQL 9.4.
    </para>
    <itemizedlist spacing="compact" mark="bullet">

      <listitem>
        <para>
-          In PostgreSQL 9.4, <command>pg_rewind</command> is not part of the core
+          PostgreSQL 9.3 does not support replication slots, so corresponding &repmgr; functionality
+          is not available.
+        </para>
+      </listitem>
+      <listitem>
+        <para>
+          In PostgreSQL 9.3 and PostgreSQL 9.4, <command>pg_rewind</command> is not part of the core
          distribution. <command>pg_rewind</command> will need to be compiled separately to be able
          to use any &repmgr; functionality which takes advantage of it.
        </para>
      </listitem>
    </itemizedlist>

-    <warning>
-      <para>
-        PostgreSQL 9.3 has reached the end of its community support period (final release was
-        <ulink url="https://www.postgresql.org/docs/9.3/release-9-3-25.html">9.3.25</ulink>
-        in November 2018) and will no longer be updated with security or bugfixes.
-      </para>
-      <para>
-        Beginning with &repmgr; 5.2, &repmgr; no longer supports PostgreSQL 9.3.
-      </para>
-      <para>
-        PostgreSQL 9.4 has reached the end of its community support period (final release was
-        <ulink url="https://www.postgresql.org/docs/9.4/release-9-4-26.html">9.4.26</ulink>
-        in February 2020) and will no longer be updated with security or bugfixes.
-      </para>
-      <para>
-        We recommend that users of these versions migrate to a supported PostgreSQL version
-        as soon as possible.
-      </para>
-      <para>
-        For further details, see the  <ulink url="https://www.postgresql.org/support/versioning/">PostgreSQL Versioning Policy</ulink>.
-      </para>
-    </warning>
-
  </sect2>
-
 </sect1>
--- a/doc/install-source.sgml
+++ b/doc/install-source.sgml
@@ -1,12 +1,11 @@
 <sect1 id="installation-source" xreflabel="Installing from source code">
+  <indexterm>
+   <primary>installation</primary>
+   <secondary>from source</secondary>
+  </indexterm>

 <title>Installing &repmgr; from source</title>

- <indexterm>
-  <primary>installation</primary>
-  <secondary>from source</secondary>
- </indexterm>
-
 <sect2 id="installation-source-prereqs">
  <title>Prerequisites for installing from source</title>
  <para>
@@ -24,7 +23,8 @@
    <listitem>
     <para>
      <literal>Debian</literal> and <literal>Ubuntu</literal>: First
-      add the <ulink url="https://apt.postgresql.org/">apt.postgresql.org</ulink>
+      add the <ulink
+      url="http://apt.postgresql.org/">apt.postgresql.org</ulink>
      repository to your <filename>sources.list</filename> if you
      have not already done so, and ensure the source repository is enabled.
     </para>
@@ -35,8 +35,8 @@
         line in the repository file, which is usually
         <filename>/etc/apt/sources.list.d/pgdg.list</filename>, e.g.:
         <programlisting>
-deb https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main
-deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlisting>
+deb http://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main
+deb-src http://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlisting>
       </para>
     </tip>
     <para>
@@ -61,31 +61,28 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist
         <itemizedlist spacing="compact" mark="bullet">

           <listitem>
-             <simpara><literal>flex</literal></simpara>
+             <simpara><literal>llibedit-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libedit-dev</literal></simpara>
+             <simpara><literal>llibkrb5-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libkrb5-dev</literal></simpara>
+             <simpara><literal>llibpam0g-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libpam0g-dev</literal></simpara>
+             <simpara><literal>llibreadline-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libreadline-dev</literal></simpara>
+             <simpara><literal>llibselinux1-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libselinux1-dev</literal></simpara>
+             <simpara><literal>llibssl-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libssl-dev</literal></simpara>
+             <simpara><literal>llibxml2-dev</literal></simpara>
           </listitem>
           <listitem>
-             <simpara><literal>libxml2-dev</literal></simpara>
-           </listitem>
-           <listitem>
-             <simpara><literal>libxslt1-dev</literal></simpara>
+             <simpara><literal>llibxslt1-dev</literal></simpara>
           </listitem>
         </itemizedlist>
       </para>
@@ -117,9 +114,6 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist

         <itemizedlist spacing="compact" mark="bullet">

-           <listitem>
-             <simpara><literal>flex</literal></simpara>
-           </listitem>
           <listitem>
             <simpara><literal>libselinux-devel</literal></simpara>
           </listitem>
@@ -142,16 +136,6 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist
         </itemizedlist>
       </para>
     </note>
-
-     <tip>
-       <para>
-         If building against PostgreSQL 11 or later configured with the <option>--with-llvm</option> option
-         (this is the case with the PGDG-provided packages) you'll also need to install the
-         <literal>llvm-toolset-7-clang</literal> package. This is available via the
-         <ulink url="https://wiki.centos.org/AdditionalResources/Repositories/SCL">Software Collections (SCL) Repository</ulink>.
-       </para>
-     </tip>
-
    </listitem>
   </itemizedlist>
  </para>
@@ -178,18 +162,17 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist

   <para>
    The source for &repmgr; is maintained at
-    <ulink url="https://github.com/EnterpriseDB/repmgr">https://github.com/EnterpriseDB/repmgr</ulink>.
+    <ulink url="https://github.com/2ndQuadrant/repmgr">https://github.com/2ndQuadrant/repmgr</ulink>.
   </para>

   <para>
-    There are also tags for each <ulink url="https://github.com/EnterpriseDB/repmgr/releases">&repmgr; release</ulink>, e.g.
-    <literal><ulink url="https://github.com/EnterpriseDB/repmgr/releases/tag/v4.4.0">v4.4.0</ulink></literal>.
+    There are also tags for each &repmgr; release, e.g. <literal>v4.2.0</literal>.
   </para>

   <para>
    Clone the source code using <application>git</application>:
    <programlisting>
-     git clone https://github.com/EnterpriseDB/repmgr</programlisting>
+     git clone https://github.com/2ndQuadrant/repmgr</programlisting>
   </para>

   <para>
@@ -207,7 +190,7 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist
    &repmgr; website along with a tarball checksum and a matching GnuPG
    signature. See
    <ulink url="http://repmgr.org/">http://repmgr.org/</ulink>
-    for the download information. See <xref linkend="appendix-signatures"/>
+    for the download information. See <xref linkend="appendix-signatures">
    for information on verifying digital signatures.
   </para>

@@ -215,11 +198,11 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist
    You will need to download the repmgr source, e.g. <filename>repmgr-4.0.tar.gz</filename>.
    You may optionally verify the package checksums from the
    <literal>.md5</literal> files and/or verify the GnuPG signatures
-    per <xref linkend="appendix-signatures"/>.
+    per <xref linkend="appendix-signatures">.
   </para>

   <para>
-    After you unpack the source code archives using <command>tar xf</command>
+    After you unpack the source code archives using <literal>tar xf</literal>
    the installation process is the same as if you were installing from a git
    clone.
   </para>
@@ -234,7 +217,7 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist
   To installing &repmgr; from source, simply execute:

   <programlisting>
-    ./configure &amp;&amp; make install</programlisting>
+    ./configure && make install</programlisting>

   Ensure <command>pg_config</command> for the target PostgreSQL version is in
   <varname>$PATH</varname>.
@@ -243,30 +226,16 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist



- <sect2 id="installation-build-repmgr-docs" xreflabel="Building repmgr documentation">
+ <sect2 id="installation-build-repmgr-docs">
   <title>Building &repmgr; documentation</title>
   <para>
    The &repmgr; documentation is (like the main PostgreSQL project)
-    written in DocBook XML format. To build it locally as HTML, you'll need to
+    written in DocBook format. To build it locally as HTML, you'll need to
    install the required packages as described in the
-    <ulink url="https://www.postgresql.org/docs/current/docguide-toolsets.html">PostgreSQL documentation</ulink>.
-   </para>
-   <para>
-	 The minimum PostgreSQL version for building the &repmgr; documentation is
-	 PostgreSQL 9.5.
-   </para>
-
-   <note>
-     <simpara>
-       In &repmgr; 4.3 and earlier, the documentation can only be built against
-       PostgreSQL 9.6 or earlier.
-     </simpara>
-   </note>
-
-   <para>
-     To build the documentation as HTML, execute:
+    <ulink url="https://www.postgresql.org/docs/9.6/docguide-toolsets.html">
+      PostgreSQL documentation</ulink> then execute:
   <programlisting>
-    ./configure &amp;&amp; make doc</programlisting>
+    ./configure && make install-doc</programlisting>
   </para>
   <para>
     The generated HTML files will be placed in the <filename>doc/html</filename>
@@ -274,20 +243,19 @@ deb-src https://apt.postgresql.org/pub/repos/apt/ stretch-pgdg main</programlist
   </para>

   <para>
-     To build the documentation as a single HTML file, after configuring and building
-     the main &repmgr; source as described above, execute:
+     To build the documentation as a single HTML file, execute:
   <programlisting>
-     ./configure &amp;&amp; make doc-repmgr.html</programlisting>
+    cd doc/ && make repmgr.html</programlisting>
   </para>

-   <para>
-     To build the documentation as a PDF file, after configuring and building
-     the main &repmgr; source as described above, execute:
-   <programlisting>
-     ./configure &amp;&amp; make doc-repmgr-A4.pdf</programlisting>
-   </para>
-
-
+   <note>
+     <simpara>
+       Due to changes in PostgreSQL's documentation build system from PostgreSQL 10,
+       the documentation can currently only be built against PostgreSQL 9.6 or earlier.
+       This limitation will be fixed when time and resources permit.
+     </simpara>
+   </note>
 </sect2>

+
 </sect1>
--- a/doc/install.sgml
+++ b/doc/install.sgml
@@ -1,11 +1,10 @@
 <chapter id="installation" xreflabel="Installation">
-
- <title>Installation</title>
-
 <indexterm>
  <primary>installation</primary>
 </indexterm>

+ <title>Installation</title>
+
 <para>
  &repmgr; can be installed from binary packages provided by your operating
  system's packaging system, or from source.
@@ -19,7 +18,7 @@
  only option if there are no packages for your operating system yet.
 </para>
 <para>
-  Before installing &repmgr; make sure you satisfy the <xref linkend="install-requirements"/>.
+  Before installing &repmgr; make sure you satisfy the <xref linkend="install-requirements">.
 </para>

 &install-requirements;
--- a/doc/legal.sgml
+++ b/doc/legal.sgml
@@ -1,18 +1,18 @@
-<!-- doc/legal.xml -->
+<!-- doc/legal.sgml -->

-<date>2022</date>
+<date>2017</date>

 <copyright>
- <year>2010-2022</year>
- <holder>EDB</holder>
+ <year>2010-2019</year>
+ <holder>2ndQuadrant, Ltd.</holder>
 </copyright>

 <legalnotice id="legalnotice">
 <title>Legal Notice</title>

 <para>
-  <productname>repmgr</productname> is Copyright &copy; 2010-2022
-  by EDB All rights reserved.
+  <productname>repmgr</productname> is Copyright &copy; 2010-2019
+  by 2ndQuadrant, Ltd. All rights reserved.
 </para>

 <para>
--- a/doc/overview.sgml
+++ b/doc/overview.sgml
@@ -7,18 +7,18 @@
 </para>
 <sect1 id="repmgr-concepts" xreflabel="Concepts">

-  <title>Concepts</title>
-
  <indexterm>
    <primary>concepts</primary>
  </indexterm>

+  <title>Concepts</title>
+
  <para>
   This guide assumes that you are familiar with PostgreSQL administration and
   streaming replication concepts. For further details on streaming
   replication, see the PostgreSQL documentation section on <ulink
-   url="https://www.postgresql.org/docs/current/warm-standby.html#STREAMING-REPLICATION">
-   streaming replication</ulink>.
+   url="https://www.postgresql.org/docs/current/interactive/warm-standby.html#STREAMING-REPLICATION">
+   streaming replication</>.
  </para>
  <para>
   The following terms are used throughout the &repmgr; documentation.
@@ -58,7 +58,7 @@
     <listitem>
      <simpara>
       This is the action which occurs if a primary server fails and a suitable standby
-       is  promoted as the new primary. The &repmgrd; daemon supports automatic failover
+       is  promoted as the new primary. The <application>repmgrd</application> daemon supports automatic failover
       to minimise downtime.
      </simpara>
     </listitem>
@@ -107,7 +107,7 @@
        promotes a (local) standby.
      </para>
      <para>
-        A witness server only needs to be created if &repmgrd;
+        A witness server only needs to be created if <application>repmgrd</application>
        is in use.
      </para>
     </listitem>
@@ -198,7 +198,7 @@
        </listitem>
        <listitem>
          <simpara><literal>repmgr.monitoring_history</literal>: historical standby monitoring information
-            written by &repmgrd;</simpara>
+            written by <application>repmgrd</application></simpara>
        </listitem>
       </itemizedlist>
      </para>
@@ -214,7 +214,7 @@
           name of the server's upstream node</simpara>
        </listitem>
        <listitem>
-          <simpara>repmgr.replication_status: when &repmgrd;'s monitoring is enabled, shows
+          <simpara>repmgr.replication_status: when <application>repmgrd</application>'s monitoring is enabled, shows
            current monitoring status for each standby.</simpara>
        </listitem>
       </itemizedlist>
--- a/doc/promoting-standby.sgml
+++ b/doc/promoting-standby.sgml
@@ -1,13 +1,13 @@
 <chapter id="promoting-standby" xreflabel="Promoting a standby">
- <title>Promoting a standby server with repmgr</title>
 <indexterm>
   <primary>promoting a standby</primary>
   <seealso>repmgr standby promote</seealso>
 </indexterm>
+ <title>Promoting a standby server with repmgr</title>
 <para>
   If a primary server fails or needs to be removed from the replication cluster,
   a new primary server must be designated, to ensure the cluster continues
-   to function correctly. This can be done with <xref linkend="repmgr-standby-promote"/>,
+   to function correctly. This can be done with <xref linkend="repmgr-standby-promote">,
   which promotes the standby on the current server to primary.
 </para>

@@ -31,7 +31,7 @@
  At this point the replication cluster will be in a partially disabled state, with
  both standbys accepting read-only connections while attempting to connect to the
  stopped primary. Note that the &repmgr; metadata table will not yet have been updated;
-  executing <xref linkend="repmgr-cluster-show"/> will note the discrepancy:
+  executing <xref linkend="repmgr-cluster-show"> will note the discrepancy:
  <programlisting>
    $ repmgr -f /etc/repmgr.conf cluster show
     ID | Name  | Role    | Status        | Upstream | Location | Connection string
@@ -60,7 +60,7 @@
    DETAIL: node 2 was successfully promoted to primary</programlisting>
 </para>
 <para>
-  Executing <xref linkend="repmgr-cluster-show"/> will show the current state; as there is now an
+  Executing <xref linkend="repmgr-cluster-show"> will show the current state; as there is now an
  active primary, the previous warning will not be displayed:
  <programlisting>
    $ repmgr -f /etc/repmgr.conf cluster show
@@ -72,8 +72,8 @@
 </para>
 <para>
  However the sole remaining standby (<literal>node3</literal>) is still trying to replicate from the failed
-  primary; <xref linkend="repmgr-standby-follow"/> must now be executed to rectify this situation
-  (see <xref linkend="follow-new-primary"/> for example).
+  primary; <xref linkend="repmgr-standby-follow"> must now be executed to rectify this situation
+  (see <xref linkend="follow-new-primary"> for example).
 </para>
 </chapter>

--- a/doc/quickstart.sgml
+++ b/doc/quickstart.sgml
@@ -17,7 +17,7 @@
 <note>
   <simpara>
     To upgrade an existing &repmgr; 3.x installation, see section
-     <xref linkend="upgrading-from-repmgr-3"/>.
+     <xref linkend="upgrading-from-repmgr-3">.
   </simpara>
 </note>

@@ -76,25 +76,19 @@
   </para>
   <programlisting>

-    # Enable replication connections; set this value to at least one more
+    # Enable replication connections; set this figure to at least one more
    # than the number of standbys which will connect to this server
-    # (note that repmgr will execute "pg_basebackup" in WAL streaming mode,
-    # which requires two free WAL senders).
-    #
-    # See: https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-MAX-WAL-SENDERS
+    # (note that repmgr will execute `pg_basebackup` in WAL streaming mode,
+    # which requires two free WAL senders)

    max_wal_senders = 10

-    # If using replication slots, set this value to at least one more
+    # Enable replication slots; set this figure to at least one more
    # than the number of standbys which will connect to this server.
    # Note that repmgr will only make use of replication slots if
-    # "use_replication_slots" is set to "true" in "repmgr.conf".
-    # (If you are not intending to use replication slots, this value
-    # can be set to "0").
-    #
-    # See: https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-MAX-REPLICATION-SLOTS
+    # "use_replication_slots" is set to "true" in repmgr.conf

-    max_replication_slots = 10
+    max_replication_slots = 0

    # Ensure WAL files contain enough information to enable read-only queries
    # on the standby.
@@ -109,41 +103,33 @@

    # Enable read-only queries on a standby
    # (Note: this will be ignored on a primary but we recommend including
-    # it anyway, in case the primary later becomes a standby)
-    #
-    # See: https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-HOT-STANDBY
+    # it anyway)

    hot_standby = on

    # Enable WAL file archiving
-    #
-    # See: https://www.postgresql.org/docs/current/runtime-config-wal.html#GUC-ARCHIVE-MODE
-
    archive_mode = on

-    # Set archive command to a dummy command; this can later be changed without
-    # needing to restart the PostgreSQL instance.
-    #
-    # See: https://www.postgresql.org/docs/current/runtime-config-wal.html#GUC-ARCHIVE-COMMAND
-
+    # Set archive command to a script or application that will safely store
+    # you WALs in a secure place. /bin/true is an example of a command that
+    # ignores archiving. Use something more sensible.
    archive_command = '/bin/true'
   </programlisting>
   <tip>
    <simpara>
      Rather than editing these settings in the default <filename>postgresql.conf</filename>
-      file, create a separate file such as <filename>postgresql.replication.conf</filename> and
+     file, create a separate file such as <filename>postgresql.replication.conf</filename> and
      include it from the end of the main configuration file with:
-     <command>include 'postgresql.replication.conf'</command>.
+     <command>include 'postgresql.replication.conf</command>.
    </simpara>
   </tip>
   <para>
     Additionally, if you are intending to use <application>pg_rewind</application>,
     and the cluster was not initialised using data checksums, you may want to consider enabling
-     <varname>wal_log_hints</varname>; for more details see <xref linkend="repmgr-node-rejoin-pg-rewind"/>.
+     <varname>wal_log_hints</varname>; for more details see <xref linkend="repmgr-node-rejoin-pg-rewind">.
   </para>
    <para>
-      See also the <link linkend="configuration-postgresql">PostgreSQL configuration</link> section in the
-      <link linkend="configuration">repmgr configuration guide</link>.
+      See also the <link linkend="configuration-postgresql">PostgreSQL configuration</link> section in the <link linkend="configuration">repmgr configuaration guide</link>.
    </para>
 </sect1>

@@ -167,7 +153,7 @@
    For the sake of simplicity, the <literal>repmgr</literal> user is created
    as a superuser. If desired, it's possible to create the <literal>repmgr</literal>
    user as a normal user. However for certain operations superuser permissions
-    are required; in this case the command line option <command>--superuser</command>
+    are requiredl; in this case the command line option <command>--superuser</command>
    can be provided to specify a superuser.
   </para>
   <para>
@@ -254,7 +240,7 @@
  </para>
  <programlisting>
    node_id=1
-    node_name='node1'
+    node_name=node1
    conninfo='host=node1 user=repmgr dbname=repmgr connect_timeout=2'
    data_directory='/var/lib/postgresql/data'
  </programlisting>
@@ -262,9 +248,10 @@
  <para>
   <filename>repmgr.conf</filename> should not be stored inside the PostgreSQL data directory,
   as it could be overwritten when setting up or reinitialising the PostgreSQL
-   server. See sections <xref linkend="configuration"/> and <xref linkend="configuration-file"/>
+   server. See sections <xref linkend="configuration"> and <xref linkend="configuration-file">
   for further details about <filename>repmgr.conf</filename>.
  </para>
+
  <note>
    <para>
      &repmgr; only uses <option>pg_bindir</option> when it executes
@@ -284,7 +271,7 @@

  <tip>
   <simpara>
-    For Debian-based distributions we recommend explicitly setting
+    For Debian-based distributions we recommend explictly setting
    <option>pg_bindir</option> to the directory where <command>pg_ctl</command> and other binaries
    not in the standard path are located. For PostgreSQL 9.6 this would be <filename>/usr/lib/postgresql/9.6/bin/</filename>.
   </simpara>
@@ -302,7 +289,7 @@

  <para>
   See the file
-   <ulink url="https://raw.githubusercontent.com/EnterpriseDB/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink>
+   <ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</>
    for details of all available configuration parameters.
  </para>

@@ -351,7 +338,7 @@
    slot_name        |
    config_file      | /etc/repmgr.conf</programlisting>
  <para>
-    Each server in the replication cluster will have its own record. If &repmgrd;
+    Each server in the replication cluster will have its own record. If <application>repmgrd</application>
    is in use, the fields <literal>upstream_node_id</literal>, <literal>active</literal> and
    <literal>type</literal> will be updated when the node's status or role changes.
  </para>
@@ -367,7 +354,7 @@
  </para>
  <programlisting>
    node_id=2
-    node_name='node2'
+    node_name=node2
    conninfo='host=node2 user=repmgr dbname=repmgr connect_timeout=2'
    data_directory='/var/lib/postgresql/data'</programlisting>
  <para>
@@ -405,10 +392,9 @@
  </programlisting>
  <para>
   This has cloned the PostgreSQL data directory files from the primary <literal>node1</literal>
-   using PostgreSQL's <command>pg_basebackup</command> utility. Replication configuration
-   containing the correct parameters to start streaming from this primary server will be
-   automatically appended to <filename>postgresql.auto.conf</filename>. (In PostgreSQL 11
-   and earlier the file <filename>recovery.conf</filename> will be created).
+   using PostgreSQL's <command>pg_basebackup</command> utility. A <filename>recovery.conf</filename>
+   file containing the correct parameters to start streaming from this primary server will be created
+   automatically.
  </para>
  <note>
   <simpara>
@@ -478,14 +464,11 @@
    latest_end_lsn        | 0/7000538
    latest_end_time       | 2017-08-28 15:20:56.418735+09
    slot_name             |
-    sender_host           | node1
-    sender_port           | 5432
    conninfo              | user=repmgr dbname=replication host=node1 application_name=node2
   </programlisting>
-   Note that the <varname>conninfo</varname> value is that generated in <filename>postgresql.auto.conf</filename>
-   (PostgreSQL 11 and earlier: <filename>recovery.conf</filename>) and will differ slightly from the primary's
-   <varname>conninfo</varname> as set in <filename>repmgr.conf</filename> - among others it will contain the
-   connecting node's name as <varname>application_name</varname>.
+   Note that the <varname>conninfo</varname> value is that generated in <filename>recovery.conf</filename>
+   and will differ slightly from the primary's <varname>conninfo</varname> as set in <filename>repmgr.conf</filename> -
+   among others it will contain the connecting node's name as <varname>application_name</varname>.
  </para>
 </sect1>

@@ -500,12 +483,11 @@
  <para>
    Check the node is registered by executing <command>repmgr cluster show</command> on the standby:
    <programlisting>
-      $ repmgr -f /etc/repmgr.conf cluster show
-
-     ID | Name  | Role    | Status    | Upstream | Location | Priority | Timeline | Connection string
-    ----+-------+---------+-----------+----------+----------+----------+----------+--------------------------------------
-     1  | node1 | primary | * running |          | default  | 100      | 1        | host=node1 dbname=repmgr user=repmgr
-     2  | node2 | standby |   running | node1    | default  | 100      | 1        | host=node2 dbname=repmgr user=repmgr</programlisting>
+    $ repmgr -f /etc/repmgr.conf cluster show
+     ID | Name  | Role    | Status    | Upstream | Location | Connection string
+    ----+-------+---------+-----------+----------+----------+--------------------------------------
+     1  | node1 | primary | * running |          | default  | host=node1 dbname=repmgr user=repmgr
+     2  | node2 | standby |   running | node1    | default  | host=node2 dbname=repmgr user=repmgr</programlisting>
  </para>
  <para>
   Both nodes are now registered with &repmgr; and the records have been copied to the standby server.
--- a/doc/repmgr-cluster-cleanup.sgml
+++ b/doc/repmgr-cluster-cleanup.sgml
@@ -38,7 +38,7 @@
    <title>Notes</title>

    <para>
-      Monitoring history will only be written if &repmgrd; is active, and
+      Monitoring history will only be written if <application>repmgrd</application> is active, and
      <varname>monitoring_history</varname> is set to <literal>true</literal> in
      <filename>repmgr.conf</filename>.
    </para>
@@ -69,8 +69,8 @@
  <refsect1>
    <title>See also</title>
    <para>
-      For more details see the sections <xref linkend="repmgrd-monitoring"/> and
-      <xref linkend="repmgrd-monitoring-configuration"/>.
+      For more details see the sections <xref linkend="repmgrd-monitoring"> and
+      <xref linkend="repmgrd-monitoring-configuration">.
    </para>
  </refsect1>

--- a/doc/repmgr-cluster-crosscheck.sgml
+++ b/doc/repmgr-cluster-crosscheck.sgml
@@ -16,9 +16,9 @@
  <refsect1>
    <title>Description</title>
    <para>
-      <command>repmgr cluster crosscheck</command> is similar to <xref linkend="repmgr-cluster-matrix"/>,
+      <command>repmgr cluster crosscheck</command> is similar to <xref linkend="repmgr-cluster-matrix">,
        but cross-checks connections between each combination of nodes. In "Example 3" in
-        <xref linkend="repmgr-cluster-matrix"/> we have no information about the state of <literal>node3</literal>.
+        <xref linkend="repmgr-cluster-matrix"> we have no information about the state of <literal>node3</literal>.
        However by running <command>repmgr cluster crosscheck</command> it's possible to get a better
        overview of the cluster situation:
          <programlisting>
--- a/doc/repmgr-cluster-event.sgml
+++ b/doc/repmgr-cluster-event.sgml
@@ -40,12 +40,12 @@
          <simpara><literal>--node-name</literal>: restrict entries to node with this name</simpara>
        </listitem>
        <listitem>
-          <simpara><literal>--event</literal>: filter specific event (see <xref linkend="event-notifications"/> for a full list)</simpara>
+          <simpara><literal>--event</literal>: filter specific event (see <xref linkend="event-notifications"> for a full list)</simpara>
        </listitem>
      </itemizedlist>
    </para>
    <para>
-      The &quot;Details&quot; column can be omitted by providing <literal>--compact</literal>.
+      The "Details" column can be omitted by providing <literal>--terse</literal>.
    </para>
  </refsect1>

@@ -71,9 +71,9 @@
      <programlisting>
    $ repmgr -f /etc/repmgr.conf cluster event --event=standby_register
     Node ID | Name  | Event            | OK | Timestamp           | Details
-    ---------+-------+------------------+----+---------------------+-------------------------------------------------------
-     3       | node3 | standby_register | t  | 2019-04-16 10:59:59 | standby registration succeeded; upstream node ID is 1
-     2       | node2 | standby_register | t  | 2019-04-16 10:59:57 | standby registration succeeded; upstream node ID is 1</programlisting>
+    ---------+-------+------------------+----+---------------------+--------------------------------
+     3       | node3 | standby_register | t  | 2017-08-17 10:28:55 | standby registration succeeded
+     2       | node2 | standby_register | t  | 2017-08-17 10:28:53 | standby registration succeeded</programlisting>
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-cluster-matrix.sgml
+++ b/doc/repmgr-cluster-matrix.sgml
@@ -93,7 +93,7 @@
   connection from <literal>node3</literal>.
  </para>
  <para>
-    In this case, the <xref linkend="repmgr-cluster-crosscheck"/> command will produce a more
+    In this case, the <xref linkend="repmgr-cluster-crosscheck"> command will produce a more
    useful result.
  </para>
  </refsect1>
--- a/doc/repmgr-cluster-show.sgml
+++ b/doc/repmgr-cluster-show.sgml
@@ -18,17 +18,15 @@
    <para>
      Displays information about each registered node in the replication cluster. This
      command polls each registered server and shows its role (<literal>primary</literal> /
-      <literal>standby</literal>) and status. It polls each server
+      <literal>standby</literal> / <literal>bdr</literal>) and status. It polls each server
      directly and can be run on any node in the cluster; this is also useful when analyzing
      connectivity from a particular node.
    </para>
-	<para>
-	  For PostgreSQL 9.6 and later, the output will also contain the node's current timeline ID.
-	</para>
+
    <para>
      Node availability is tested by connecting from the node where
      <command>repmgr cluster show</command> is executed, and does not necessarily imply the node
-      is down. See <xref linkend="repmgr-cluster-matrix"/> and <xref linkend="repmgr-cluster-crosscheck"/> to get
+      is down. See <xref linkend="repmgr-cluster-matrix"> and <xref linkend="repmgr-cluster-crosscheck"> to get
      better overviews of connections between nodes.
    </para>

@@ -53,13 +51,12 @@
    <para>
    <programlisting>
    $ repmgr -f /etc/repmgr.conf cluster show
-     ID | Name  | Role    | Status    | Upstream | Location | Priority | Timeline | Connection string
-    ----+-------+---------+-----------+----------+----------+----------+----------+-----------------------------------------
-     1  | node1 | primary | * running |          | default  | 100      | 1        | host=db_node1 dbname=repmgr user=repmgr
-     2  | node2 | standby |   running | node1    | default  | 100      | 1        | host=db_node2 dbname=repmgr user=repmgr
-     3  | node3 | standby |   running | node1    | default  | 100      | 1        | host=db_node3 dbname=repmgr user=repmgr
-     4  | node4 | standby |   running | node1    | default  | 100      | 1        | host=db_node4 dbname=repmgr user=repmgr
-     5  | node5 | witness | * running | node1    | default  | 0        | n/a      | host=db_node5 dbname=repmgr user=repmgr</programlisting>
+
+     ID | Name  | Role    | Status    | Upstream | Location | Priority | Connection string
+    ----+-------+---------+-----------+----------+----------+----------+-----------------------------------------
+     1  | node1 | primary | * running |          | default  | 100      | host=db_node1 dbname=repmgr user=repmgr
+     2  | node2 | standby |   running | node1    | default  | 100      | host=db_node2 dbname=repmgr user=repmgr
+     3  | node3 | standby |   running | node1    | default  | 100      | host=db_node3 dbname=repmgr user=repmgr</programlisting>
  </para>
  </refsect1>
  <refsect1>
@@ -83,22 +80,18 @@
 	  (but <literal>node3</literal> is not attached to it, and its metadata has not yet been updated);
 	  <literal>node4</literal> is running but rejecting connections (from <literal>node3</literal> at least).
      <programlisting>
-     ID | Name  | Role    | Status               | Upstream | Location | Priority | Timeline | Connection string
-    ----+-------+---------+----------------------+----------+----------+----------+----------+----------------------------------------------------
-     1  | node1 | primary | ? unreachable        |          | default  | 100      |          | host=db_node1 dbname=repmgr user=repmgr
-     2  | node2 | standby | ! running as primary | ? node1  | default  | 100      | 2        | host=db_node2 dbname=repmgr user=repmgr
-     3  | node3 | standby |   running            | ? node1  | default  | 100      | 1        | host=db_node3 dbname=repmgr user=repmgr
-     4  | node4 | standby | ? running            | ? node1  | default  | 100      |          | host=db_node4 dbname=repmgr user=repmgr
+	 ID | Name  | Role    | Status               | Upstream | Location | Priority | Connection string
+	----+-------+---------+----------------------+----------+----------+----------+-----------------------------------------
+	 1  | node1 | primary | ? unreachable        |          | default  | 100      | host=db_node1 dbname=repmgr user=repmgr
+	 2  | node2 | standby | ! running as primary | node1    | default  | 100      | host=db_node2 dbname=repmgr user=repmgr
+	 3  | node3 | standby |   running            | node1    | default  | 100      | host=db_node3 dbname=repmgr user=repmgr
+	 4  | node4 | standby | ? running            | node1    | default  | 100      | host=db_node4 dbname=repmgr user=repmgr

-    WARNING: following issues were detected
-      - unable to connect to node "node1" (ID: 1)
-      - node "node1" (ID: 1) is registered as an active primary but is unreachable
-      - node "node2" (ID: 2) is registered as standby but running as primary
-      - unable to connect to node "node2" (ID: 2)'s upstream node "node1" (ID: 1)
-      - unable to determine if node "node2" (ID: 2) is attached to its upstream node "node1" (ID: 1)
-      - unable to connect to node "node3" (ID: 3)'s upstream node "node1" (ID: 1)
-      - unable to determine if node "node3" (ID: 3) is attached to its upstream node "node1" (ID: 1)
-      - unable to connect to node "node4" (ID: 4)
+	WARNING: following issues were detected
+	  - unable to connect to node "node1" (ID: 1)
+	  - node "node1" (ID: 1) is registered as an active primary but is unreachable
+	  - node "node2" (ID: 2) is registered as standby but running as primary
+	  - unable to connect to node "node4" (ID: 4)
    HINT: execute with --verbose option to see connection error messages</programlisting>
    </para>
 	<para>
@@ -108,7 +101,7 @@
 	</para>
 	<tip>
 	  <para>
-		Use <xref linkend="repmgr-cluster-matrix"/> and <xref linkend="repmgr-cluster-crosscheck"/>
+		Use <xref linkend="repmgr-cluster-matrix"> and <xref linkend="repmgr-cluster-crosscheck">
 		to diagnose connection issues across the whole replication cluster.
 	  </para>
 	</tip>
@@ -203,31 +196,11 @@
        </listitem>
      </varlistentry>

-      <varlistentry>
-        <term><option>ERR_BAD_CONFIG (1)</option></term>
-        <listitem>
-          <para>
-            An issue was encountered while attempting to retrieve
-            &repmgr; metadata.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_DB_CONN (6)</option></term>
-        <listitem>
-          <para>
-            &repmgr; was unable to connect to the local PostgreSQL instance.
-          </para>
-        </listitem>
-      </varlistentry>
-
      <varlistentry>
        <term><option>ERR_NODE_STATUS (25)</option></term>
        <listitem>
          <para>
-            One or more issues were detected with the replication configuration,
-            e.g. a node was not in its expected state.
+            One or more issues were detected.
          </para>
        </listitem>
      </varlistentry>
@@ -238,7 +211,7 @@
  <refsect1>
    <title>See also</title>
    <para>
-     <xref linkend="repmgr-node-status"/>, <xref linkend="repmgr-node-check"/>, <xref linkend="repmgr-service-status"/>
+     <xref linkend="repmgr-node-status">, <xref linkend="repmgr-node-check">, <xref linkend="repmgr-daemon-status">
    </para>
  </refsect1>

--- a/doc/repmgr-daemon-pause.sgml
+++ b/doc/repmgr-daemon-pause.sgml
@@ -1,6 +1,6 @@
-<refentry id="repmgr-service-pause">
+<refentry id="repmgr-daemon-pause">
  <indexterm>
-    <primary>repmgr service pause</primary>
+    <primary>repmgr daemon pause</primary>
  </indexterm>

  <indexterm>
@@ -9,52 +9,43 @@
  </indexterm>

  <refmeta>
-    <refentrytitle>repmgr service pause</refentrytitle>
+    <refentrytitle>repmgr daemon pause</refentrytitle>
  </refmeta>

  <refnamediv>
-    <refname>repmgr service pause</refname>
-    <refpurpose>Instruct all &repmgrd; instances in the replication cluster to pause failover operations</refpurpose>
+    <refname>repmgr daemon pause</refname>
+    <refpurpose>Instruct all <application>repmgrd</application> instances in the replication cluster to pause failover operations</refpurpose>
  </refnamediv>

  <refsect1>
    <title>Description</title>
    <para>
      This command can be run on any active node in the replication cluster to instruct all
-      running &repmgrd; instances to &quot;pause&quot; themselves, i.e. take no
+      running <application>repmgrd</application> instances to &quot;pause&quot; themselves, i.e. take no
      action (such as promoting themselves or following a new primary) if a failover event is detected.
    </para>
    <para>
      This functionality is useful for performing maintenance operations, such as switchovers
-      or upgrades, which might otherwise trigger a failover if &repmgrd;
+      or upgrades, which might otherwise trigger a failover if <application>repmgrd</application>
      is running normally.
    </para>
    <note>
      <para>
        It's important to wait a few seconds after restarting PostgreSQL on any node before running
-        <command>repmgr service pause</command>, as the &repmgrd; instance
+        <command>repmgr daemon pause</command>, as the <application>repmgrd</application> instance
        on the restarted node will take a second or two before it has updated its status.
      </para>
    </note>
    <para>
-      <xref linkend="repmgr-service-unpause"/> will instruct all previously paused &repmgrd;
+      <xref linkend="repmgr-daemon-unpause"> will instruct all previously paused <application>repmgrd</application>
      instances to resume normal failover operation.
    </para>
  </refsect1>

-  <refsect1>
-    <title>Prerequisites</title>
-    <para>
-      PostgreSQL must be accessible on all nodes (using the <varname>conninfo</varname> string shown by
-      <link linkend="repmgr-cluster-show"><command>repmgr cluster show</command></link>)
-      from the node where <command>repmgr service pause</command> is executed.
-    </para>
-  </refsect1>
-
  <refsect1>
    <title>Execution</title>
    <para>
-      <command>repmgr service pause</command> can be executed on any active node in the
+      <command>repmgr daemon pause</command> can be executed on any active node in the
      replication cluster. A valid <filename>repmgr.conf</filename> file is required.
      It will have no effect on previously paused nodes.
    </para>
@@ -64,7 +55,7 @@
    <title>Example</title>
    <para>
    <programlisting>
-$ repmgr -f /etc/repmgr.conf service pause
+$ repmgr -f /etc/repmgr.conf daemon pause
 NOTICE: node 1 (node1) paused
 NOTICE: node 2 (node2) paused
 NOTICE: node 3 (node3) paused</programlisting>
@@ -78,7 +69,7 @@ NOTICE: node 3 (node3) paused</programlisting>
        <term><option>--dry-run</option></term>
        <listitem>
          <para>
-            Check if nodes are reachable but don't pause &repmgrd;.
+            Check if nodes are reachable but don't pause <application>repmgrd</application>.
          </para>
        </listitem>
      </varlistentry>
@@ -88,7 +79,7 @@ NOTICE: node 3 (node3) paused</programlisting>
  <refsect1>
    <title>Exit codes</title>
    <para>
-      One of the following exit codes will be emitted by <command>repmgr service unpause</command>:
+      One of the following exit codes will be emitted by <command>repmgr daemon unpause</command>:
    </para>
    <variablelist>

@@ -96,7 +87,7 @@ NOTICE: node 3 (node3) paused</programlisting>
        <term><option>SUCCESS (0)</option></term>
        <listitem>
          <para>
-            &repmgrd; could be paused on all nodes.
+            <application>repmgrd</application> could be paused on all nodes.
          </para>
        </listitem>
      </varlistentry>
@@ -105,7 +96,7 @@ NOTICE: node 3 (node3) paused</programlisting>
        <term><option>ERR_REPMGRD_PAUSE (26)</option></term>
        <listitem>
          <para>
-           &repmgrd; could not be paused on one or mode nodes.
+           <application>repmgrd</application> could not be paused on one or mode nodes.
          </para>
        </listitem>
      </varlistentry>
@@ -116,11 +107,7 @@ NOTICE: node 3 (node3) paused</programlisting>
  <refsect1>
    <title>See also</title>
    <para>
-      <xref linkend="repmgr-service-unpause"/>,
-      <xref linkend="repmgr-service-status"/>,
-      <xref linkend="repmgrd-pausing"/>,
-      <xref linkend="repmgr-daemon-start"/>,
-      <xref linkend="repmgr-daemon-stop"/>
+      <xref linkend="repmgr-daemon-unpause">, <xref linkend="repmgr-daemon-status">
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-daemon-start.sgml
+++ b/doc/repmgr-daemon-start.sgml
@@ -14,18 +14,18 @@

  <refnamediv>
    <refname>repmgr daemon start</refname>
-    <refpurpose>Start the &repmgrd; daemon on the local node</refpurpose>
+    <refpurpose>Start the <application>repmgrd</application> daemon</refpurpose>
  </refnamediv>

  <refsect1>
    <title>Description</title>
    <para>
-      This command starts the &repmgrd; service on the
+      This command starts the <application>repmgrd</application> daemon on the
      local node.
    </para>
    <para>
-      By default, &repmgr; will wait for up to 15 seconds to confirm that &repmgrd;
-      started. This behaviour can be overridden by specifying a different value using the <option>--wait</option>
+      By default, &repmgr; will wait for up to 15 seconds to confirm that <application>repmgrd</application>
+      started. This behaviour can be overridden by specifying a diffent value using the <option>--wait</option>
      option, or disabled altogether with the <option>--no-wait</option> option.
    </para>

@@ -33,7 +33,7 @@
      <para>
        The <filename>repmgr.conf</filename> parameter <varname>repmgrd_service_start_command</varname>
        must be set for <command>repmgr daemon start</command> to work; see section
-        <xref linkend="repmgr-daemon-start-configuration"/> for details.
+        <xref linkend="repmgr-daemon-start-configuration"> for details.
      </para>
    </important>
  </refsect1>
@@ -50,7 +50,7 @@
        <term><option>--dry-run</option></term>
        <listitem>
          <para>
-            Check prerequisites but don't actually attempt to start &repmgrd;.
+            Check prerequisites but don't actually attempt to start <application>repmgrd</application>.
          </para>
          <para>
            This action will output the command which would be executed.
@@ -63,7 +63,7 @@
        <term><option>--wait</option></term>
        <listitem>
          <para>
-            Wait for the specified number of seconds to confirm that &repmgrd;
+            Wait for the specified number of seconds to confirm that <application>repmgrd</application>
            started successfully.
          </para>
          <para>
@@ -77,7 +77,7 @@
        <term><option>--no-wait</option></term>
        <listitem>
          <para>
-            Don't wait to confirm that &repmgrd;
+            Don't wait to confirm that <application>repmgrd</application>
            started successfully.
          </para>
          <para>
@@ -99,18 +99,17 @@
    <variablelist>

      <varlistentry>
+        <indexterm>
+          <primary>repmgrd_service_start_command</primary>
+          <secondary>with &quot;repmgr daemon start&quot;</secondary>
+        </indexterm>

        <term><option>repmgrd_service_start_command</option></term>
        <listitem>
-          <indexterm>
-            <primary>repmgrd_service_start_command</primary>
-            <secondary>with &quot;repmgr daemon start&quot;</secondary>
-          </indexterm>
-
          <para>
            <command>repmgr daemon start</command> will execute the command defined by the
            <varname>repmgrd_service_start_command</varname> parameter in <filename>repmgr.conf</filename>.
-            This must be set to a shell command which will start &repmgrd;;
+            This must be set to a shell command which will start <application>repmgrd</application>;
            if &repmgr; was installed from a package, this will be the service command defined by the
            package. For more details see <link linkend="appendix-packages">Appendix: &repmgr; package details</link>.
          </para>
@@ -118,7 +117,7 @@
            <para>
              If &repmgr; was installed from a system package, and you do not configure
              <varname>repmgrd_service_start_command</varname> to an appropriate service command, this may
-              result in the system becoming confused about the state of the &repmgrd;
+              result in the system becoming confused about the state of the <application>repmgrd</application>
              service; this is particularly the case with <literal>systemd</literal>.
            </para>
          </important>
@@ -140,12 +139,12 @@
        <term><option>SUCCESS (0)</option></term>
        <listitem>
          <para>
-            The &repmgrd; start command (defined in
+            The <application>repmgrd</application> start command (defined in
            <varname>repmgrd_service_start_command</varname>) was successfully executed.
          </para>
          <para>
            If the <option>--wait</option> option was provided, &repmgr; will confirm that
-            &repmgrd; has actually started up.
+            <application>repmgrd</application> has actually started up.
          </para>
        </listitem>
      </varlistentry>
@@ -168,10 +167,10 @@
            &repmgr; was unable to connect to the local PostgreSQL node.
          </para>
          <para>
-            PostgreSQL must be running before &repmgrd;
+            PostgreSQL must be running before <application>repmgrd</application>
            can be started. Additionally, unless the <option>--no-wait</option> option was
            provided, &repmgr; needs to be able to connect to the local PostgreSQL node
-            to determine the state of &repmgrd;.
+            to determine the state of <application>repmgrd</application>.
          </para>
        </listitem>
      </varlistentry>
@@ -181,11 +180,11 @@
        <term><option>ERR_REPMGRD_SERVICE (27)</option></term>
        <listitem>
          <para>
-            The &repmgrd; start command (defined in
+            The <application>repmgrd</application> start command (defined in
            <varname>repmgrd_service_start_command</varname>) was not successfully executed.
          </para>
          <para>
-            This can also mean that &repmgr; was unable to confirm whether &repmgrd;
+            This can also mean that &repmgr; was unable to confirm whether <application>repmgrd</application>
            successfully started (unless the <option>--no-wait</option> option was provided).
          </para>
        </listitem>
@@ -197,11 +196,7 @@
  <refsect1>
    <title>See also</title>
    <para>
-      <xref linkend="repmgr-daemon-stop"/>,
-      <xref linkend="repmgrd-daemon"/>,
-      <xref linkend="repmgr-service-status"/>,
-      <xref linkend="repmgr-service-pause"/>,
-      <xref linkend="repmgr-service-unpause"/>
+      <xref linkend="repmgr-daemon-stop">, <xref linkend="repmgr-daemon-status">, <xref linkend="repmgrd-daemon">
    </para>
  </refsect1>

--- a/doc/repmgr-daemon-status.sgml
+++ b/doc/repmgr-daemon-status.sgml
@@ -0,0 +1,186 @@
+<refentry id="repmgr-daemon-status">
+  <indexterm>
+    <primary>repmgr daemon status</primary>
+  </indexterm>
+
+  <indexterm>
+    <primary>repmgrd</primary>
+    <secondary>displaying daemon status</secondary>
+  </indexterm>
+
+  <refmeta>
+    <refentrytitle>repmgr daemon status</refentrytitle>
+  </refmeta>
+
+  <refnamediv>
+    <refname>repmgr daemon status</refname>
+    <refpurpose>display information about the status of <application>repmgrd</application> on each node in the cluster</refpurpose>
+  </refnamediv>
+
+  <refsect1>
+    <title>Description</title>
+    <para>
+      This command provides an overview over all active nodes in the cluster and the state
+      of each node's <application>repmgrd</application> instance. It can be used to check
+      the result of <xref linkend="repmgr-daemon-pause"> and <xref linkend="repmgr-daemon-unpause">
+      operations.
+    </para>
+  </refsect1>
+
+  <refsect1>
+    <title>Execution</title>
+    <para>
+      <command>repmgr daemon status</command> can be executed on any active node in the
+      replication cluster. A valid <filename>repmgr.conf</filename> file is required.
+    </para>
+    <para>
+      If PostgreSQL is not running on a node, &repmgr; will not be able to determine the
+      status of that node's <application>repmgrd</application> instance.
+    </para>
+    <note>
+      <para>
+        After restarting PostgreSQL on any node, the <application>repmgrd</application> instance
+        will take a second or two before it is able to update its status. Until then,
+        <application>repmgrd</application> will be shown as not running.
+      </para>
+    </note>
+
+  </refsect1>
+
+  <refsect1>
+    <title>Examples</title>
+    <para>
+      <application>repmgrd</application> running normally on all nodes:
+    <programlisting>$ repmgr -f /etc/repmgr.conf daemon status
+ ID | Name  | Role    | Priority | Status  | repmgrd | PID   | Paused? | Upstream last seen
+----+-------+---------+----------+---------+---------+-------+---------+--------------------
+ 1  | node1 | primary | 100      | running | running | 71987 | no      | n/a
+ 2  | node2 | standby | 100      | running | running | 71996 | no      | 1 second(s) ago
+ 3  | node3 | standby | 100      | running | running | 72042 | no      | 1 second(s) ago
+</programlisting>
+    </para>
+
+    <para>
+      <application>repmgrd</application> paused on all nodes (using <xref linkend="repmgr-daemon-pause">):
+    <programlisting>$ repmgr -f /etc/repmgr.conf daemon status
+ ID | Name  | Role    | Priority | Status  | repmgrd | PID   | Paused? | Upstream last seen
+----+-------+---------+----------+---------+---------+-------+---------+--------------------
+ 1  | node1 | primary | 100      | running | running | 71987 | yes     | n/a
+ 2  | node2 | standby | 100      | running | running | 71996 | yes     | 0 second(s) ago
+ 3  | node3 | standby | 100      | running | running | 72042 | yes     | 0 second(s) ago
+</programlisting>
+    </para>
+
+    <para>
+      <application>repmgrd</application> not running on one node:
+    <programlisting>$ repmgr -f /etc/repmgr.conf daemon status
+ ID | Name  | Role    | Priority | Status  | repmgrd     | PID   | Paused? | Upstream last seen
+----+-------+---------+----------+---------+-------------+-------+---------+--------------------
+ 1  | node1 | primary | 100      | running | running     | 71987 | yes     | n/a
+ 2  | node2 | standby | 100      | running | not running | n/a   | n/a     | n/a
+ 3  | node3 | standby | 100      | running | running     | 72042 | yes     | 0 second(s) ago</programlisting>
+    </para>
+  </refsect1>
+
+  <refsect1>
+    <title>Options</title>
+
+    <variablelist>
+
+      <varlistentry>
+        <term><option>--csv</option></term>
+        <listitem>
+          <para>
+            <command>repmgr daemon status</command> accepts an optional parameter <literal>--csv</literal>, which
+            outputs the replication cluster's status in a simple CSV format, suitable for
+            parsing by scripts, e.g.:
+            <programlisting>
+    $ repmgr -f /etc/repmgr.conf daemon status --csv
+    1,node1,primary,1,1,5722,1,100,-1
+    2,node2,standby,1,0,-1,1,100,1
+    3,node3,standby,1,1,5779,1,100,1</programlisting>
+          </para>
+          <para>
+            The columns have following meanings:
+            <itemizedlist spacing="compact" mark="bullet">
+              <listitem>
+                <simpara>
+                  node ID
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  node name
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  node type (primary or standby)
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  PostgreSQL server running (1 = running, 0 = not running)
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  <application>repmgrd</application> running (1 = running, 0 = not running, -1 = unknown)
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  <application>repmgrd</application> PID (-1 if not running or status unknown)
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  <application>repmgrd</application> paused (1 = paused, 0 = not paused, -1 = unknown)
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  <application>repmgrd</application> node priority
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  interval in seconds since the node's upstream was last seen (this will be -1 if the value could not be retrieved, or the node is primary)
+                </simpara>
+              </listitem>
+
+            </itemizedlist>
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--verbose</option></term>
+        <listitem>
+          <para>
+            Display the full text of any database connection error messages
+          </para>
+        </listitem>
+      </varlistentry>
+
+    </variablelist>
+
+  </refsect1>
+
+
+
+  <refsect1>
+    <title>See also</title>
+    <para>
+      <xref linkend="repmgr-daemon-pause">, <xref linkend="repmgr-daemon-unpause">, <xref linkend="repmgr-cluster-show">
+    </para>
+  </refsect1>
+</refentry>
--- a/doc/repmgr-daemon-stop.sgml
+++ b/doc/repmgr-daemon-stop.sgml
@@ -14,25 +14,25 @@

  <refnamediv>
    <refname>repmgr daemon stop</refname>
-    <refpurpose>Stop the &repmgrd; daemon on the local node</refpurpose>
+    <refpurpose>Stop the <application>repmgrd</application> daemon</refpurpose>
  </refnamediv>

  <refsect1>
    <title>Description</title>
    <para>
-      This command stops the &repmgrd; daemon on the
+      This command stops the <application>repmgrd</application> daemon on the
      local node.
    </para>

    <para>
-      By default, &repmgr; will wait for up to 15 seconds to confirm that &repmgrd;
-      stopped. This behaviour can be overridden by specifying a different value using the <option>--wait</option>
+      By default, &repmgr; will wait for up to 15 seconds to confirm that <application>repmgrd</application>
+      stopped. This behaviour can be overridden by specifying a diffent value using the <option>--wait</option>
      option, or disabled altogether with the <option>--no-wait</option> option.
    </para>
    <note>
      <para>
        If PostgreSQL is not running on the local node, under some circumstances &repmgr; may not
-        be able to confirm if &repmgrd; has actually stopped.
+        be able to confirm if <application>repmgrd</application> has actually stopped.
      </para>
    </note>

@@ -40,7 +40,7 @@
      <para>
        The <filename>repmgr.conf</filename> parameter <varname>repmgrd_service_stop_command</varname>
        must be set for <command>repmgr daemon stop</command> to work; see section
-        <xref linkend="repmgr-daemon-stop-configuration"/> for details.
+        <xref linkend="repmgr-daemon-stop-configuration"> for details.
      </para>
    </important>
  </refsect1>
@@ -50,7 +50,7 @@
    <para>
      <command>repmgr daemon stop</command> will execute the command defined by the
      <varname>repmgrd_service_stop_command</varname> parameter in <filename>repmgr.conf</filename>.
-      This must be set to a shell command which will stop &repmgrd;;
+      This must be set to a shell command which will stop <application>repmgrd</application>;
      if &repmgr; was installed from a package, this will be the service command defined by the
      package. For more details see <link linkend="appendix-packages">Appendix: &repmgr; package details</link>.
    </para>
@@ -59,7 +59,7 @@
      <para>
        If &repmgr; was installed from a system package, and you do not configure
        <varname>repmgrd_service_stop_command</varname> to an appropriate service command, this may
-        result in the system becoming confused about the state of the &repmgrd;
+        result in the system becoming confused about the state of the <application>repmgrd</application>
        service; this is particularly the case with <literal>systemd</literal>.
      </para>
    </important>
@@ -76,7 +76,7 @@
        <term><option>--dry-run</option></term>
        <listitem>
          <para>
-            Check prerequisites but don't actually attempt to stop &repmgrd;.
+            Check prerequisites but don't actually attempt to stop <application>repmgrd</application>.
          </para>
          <para>
            This action will output the command which would be executed.
@@ -89,7 +89,7 @@
        <term><option>--wait</option></term>
        <listitem>
          <para>
-            Wait for the specified number of seconds to confirm that &repmgrd;
+            Wait for the specified number of seconds to confirm that <application>repmgrd</application>
            stopped successfully.
          </para>
          <para>
@@ -103,7 +103,7 @@
        <term><option>--no-wait</option></term>
        <listitem>
          <para>
-            Don't wait to confirm that &repmgrd;
+            Don't wait to confirm that <application>repmgrd</application>
            stopped successfully.
          </para>
          <para>
@@ -124,18 +124,17 @@
    <variablelist>

      <varlistentry>
+        <indexterm>
+          <primary>repmgrd_service_stop_command</primary>
+          <secondary>with &quot;repmgr daemon stop&quot;</secondary>
+        </indexterm>

        <term><option>repmgrd_service_stop_command</option></term>
        <listitem>
-          <indexterm>
-            <primary>repmgrd_service_stop_command</primary>
-          <secondary>with &quot;repmgr daemon stop&quot;</secondary>
-          </indexterm>
-
          <para>
            <command>repmgr daemon stop</command> will execute the command defined by the
            <varname>repmgrd_service_stop_command</varname> parameter in <filename>repmgr.conf</filename>.
-            This must be set to a shell command which will stop &repmgrd;;
+            This must be set to a shell command which will stop <application>repmgrd</application>;
            if &repmgr; was installed from a package, this will be the service command defined by the
            package. For more details see <link linkend="appendix-packages">Appendix: &repmgr; package details</link>.
          </para>
@@ -143,7 +142,7 @@
            <para>
              If &repmgr; was installed from a system package, and you do not configure
              <varname>repmgrd_service_stop_command</varname> to an appropriate service command, this may
-              result in the system becoming confused about the state of the &repmgrd;
+              result in the system becoming confused about the state of the <application>repmgrd</application>
              service; this is particularly the case with <literal>systemd</literal>.
            </para>
          </important>
@@ -164,7 +163,7 @@
        <term><option>SUCCESS (0)</option></term>
        <listitem>
          <para>
-            &repmgrd; could be stopped.
+            <application>repmgrd</application> could be stopped.
          </para>
        </listitem>
      </varlistentry>
@@ -183,7 +182,7 @@
        <term><option>ERR_REPMGRD_SERVICE (27)</option></term>
        <listitem>
          <para>
-            &repmgrd; could not be stopped.
+            <application>repmgrd</application> could not be stopped.
          </para>
        </listitem>
      </varlistentry>
@@ -194,11 +193,7 @@
  <refsect1>
    <title>See also</title>
    <para>
-      <xref linkend="repmgr-daemon-start"/>,
-      <xref linkend="repmgrd-daemon"/>,
-      <xref linkend="repmgr-service-status"/>,
-      <xref linkend="repmgr-service-pause"/>,
-      <xref linkend="repmgr-service-unpause"/>
+      <xref linkend="repmgr-daemon-start">, <xref linkend="repmgr-daemon-status">, <xref linkend="repmgrd-daemon">
    </para>
  </refsect1>

--- a/doc/repmgr-daemon-unpause.sgml
+++ b/doc/repmgr-daemon-unpause.sgml
@@ -1,6 +1,6 @@
-<refentry id="repmgr-service-unpause">
+<refentry id="repmgr-daemon-unpause">
  <indexterm>
-    <primary>repmgr service unpause</primary>
+    <primary>repmgr daemon unpause</primary>
  </indexterm>

  <indexterm>
@@ -8,47 +8,39 @@
    <secondary>unpausing</secondary>
  </indexterm>

+
  <refmeta>
-    <refentrytitle>repmgr service unpause</refentrytitle>
+    <refentrytitle>repmgr daemon unpause</refentrytitle>
  </refmeta>

  <refnamediv>
-    <refname>repmgr service unpause</refname>
-    <refpurpose>Instruct all &repmgrd; instances in the replication cluster to resume failover operations</refpurpose>
+    <refname>repmgr daemon unpause</refname>
+    <refpurpose>Instruct all <application>repmgrd</application> instances in the replication cluster to resume failover operations</refpurpose>
  </refnamediv>

  <refsect1>
    <title>Description</title>
    <para>
      This command can be run on any active node in the replication cluster to instruct all
-      running &repmgrd; instances to &quot;unpause&quot;
-      (following a previous execution of <xref linkend="repmgr-service-pause"/>)
+      running <application>repmgrd</application> instances to &quot;unpause&quot;
+      (following a previous execution of <xref linkend="repmgr-daemon-pause">)
      and resume normal failover/monitoring operation.
    </para>

    <note>
      <para>
        It's important to wait a few seconds after restarting PostgreSQL on any node before running
-        <command>repmgr service pause</command>, as the &repmgrd; instance
+        <command>repmgr daemon pause</command>, as the <application>repmgrd</application> instance
        on the restarted node will take a second or two before it has updated its status.
      </para>
    </note>

  </refsect1>

-  <refsect1>
-    <title>Prerequisites</title>
-    <para>
-      PostgreSQL must be accessible on all nodes (using the <varname>conninfo</varname> string shown by
-      <link linkend="repmgr-cluster-show"><command>repmgr cluster show</command></link>)
-      from the node where <command>repmgr service pause</command> is executed.
-    </para>
-  </refsect1>
-
  <refsect1>
    <title>Execution</title>
    <para>
-     <command>repmgr service unpause</command> can be executed on any active node in the
+     <command>repmgr daemon unpause</command> can be executed on any active node in the
      replication cluster. A valid <filename>repmgr.conf</filename> file is required.
      It will have no effect on nodes which are not already paused.
    </para>
@@ -58,7 +50,7 @@
    <title>Example</title>
    <para>
    <programlisting>
-$ repmgr -f /etc/repmgr.conf service unpause
+$ repmgr -f /etc/repmgr.conf daemon unpause
 NOTICE: node 1 (node1) unpaused
 NOTICE: node 2 (node2) unpaused
 NOTICE: node 3 (node3) unpaused</programlisting>
@@ -72,7 +64,7 @@ NOTICE: node 3 (node3) unpaused</programlisting>
        <term><option>--dry-run</option></term>
        <listitem>
          <para>
-            Check if nodes are reachable but don't unpause &repmgrd;.
+            Check if nodes are reachable but don't unpause <application>repmgrd</application>.
          </para>
        </listitem>
      </varlistentry>
@@ -82,7 +74,7 @@ NOTICE: node 3 (node3) unpaused</programlisting>
  <refsect1>
    <title>Exit codes</title>
    <para>
-      One of the following exit codes will be emitted by <command>repmgr service unpause</command>:
+      One of the following exit codes will be emitted by <command>repmgr daemon unpause</command>:
    </para>
    <variablelist>

@@ -90,7 +82,7 @@ NOTICE: node 3 (node3) unpaused</programlisting>
        <term><option>SUCCESS (0)</option></term>
        <listitem>
          <para>
-            &repmgrd; could be unpaused on all nodes.
+            <application>repmgrd</application> could be unpaused on all nodes.
          </para>
        </listitem>
      </varlistentry>
@@ -99,7 +91,7 @@ NOTICE: node 3 (node3) unpaused</programlisting>
        <term><option>ERR_REPMGRD_PAUSE (26)</option></term>
        <listitem>
          <para>
-           &repmgrd; could not be unpaused on one or mode nodes.
+           <application>repmgrd</application> could not be unpaused on one or mode nodes.
          </para>
        </listitem>
      </varlistentry>
@@ -110,11 +102,7 @@ NOTICE: node 3 (node3) unpaused</programlisting>
  <refsect1>
    <title>See also</title>
    <para>
-      <xref linkend="repmgr-service-pause"/>,
-      <xref linkend="repmgr-service-status"/>,
-      <xref linkend="repmgrd-pausing"/>,
-      <xref linkend="repmgr-daemon-start"/>,
-      <xref linkend="repmgr-daemon-stop"/>
+      <xref linkend="repmgr-daemon-pause">, <xref linkend="repmgr-daemon-status">
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-node-check.sgml
+++ b/doc/repmgr-node-check.sgml
@@ -0,0 +1,210 @@
+<refentry id="repmgr-node-check">
+  <indexterm>
+    <primary>repmgr node check</primary>
+  </indexterm>
+
+  <refmeta>
+    <refentrytitle>repmgr node check</refentrytitle>
+  </refmeta>
+
+  <refnamediv>
+    <refname>repmgr node check</refname>
+    <refpurpose>performs some health checks on a node from a replication perspective</refpurpose>
+  </refnamediv>
+
+  <refsect1>
+    <title>Description</title>
+    <para>
+      Performs some health checks on a node from a replication perspective.
+      This command must be run on the local node.
+    </para>
+	<note>
+	  <para>
+		Currently &repmgr; performs health checks on physical replication
+		slots only, with the aim of warning about streaming replication standbys which
+		have become detached and the associated risk of uncontrolled WAL file
+		growth.
+	  </para>
+	</note>
+  </refsect1>
+
+  <refsect1>
+    <title>Example</title>
+    <para>
+      <programlisting>
+       $ repmgr -f /etc/repmgr.conf node check
+       Node "node1":
+            Server role: OK (node is primary)
+            Replication lag: OK (N/A - node is primary)
+            WAL archiving: OK (0 pending files)
+            Downstream servers: OK (2 of 2 downstream nodes attached)
+            Replication slots: OK (node has no physical replication slots)
+            Missing replication slots: OK (node has no missing physical replication slots)</programlisting>
+    </para>
+  </refsect1>
+  <refsect1>
+    <title>Individual checks</title>
+    <para>
+      Each check can be performed individually by supplying
+      an additional command line parameter, e.g.:
+      <programlisting>
+        $ repmgr node check --role
+        OK (node is primary)</programlisting>
+    </para>
+    <para>
+	  Parameters for individual checks are as follows:
+    <itemizedlist spacing="compact" mark="bullet">
+
+     <listitem>
+      <simpara>
+        <literal>--role</literal>: checks if the node has the expected role
+      </simpara>
+     </listitem>
+
+     <listitem>
+      <simpara>
+        <literal>--replication-lag</literal>: checks if the node is lagging by more than
+        <varname>replication_lag_warning</varname> or <varname>replication_lag_critical</varname>
+      </simpara>
+     </listitem>
+
+     <listitem>
+      <simpara>
+        <literal>--archive-ready</literal>: checks for WAL files which have not yet been archived,
+        and returns <literal>WARNING</literal> or <literal>CRITICAL</literal> if the number
+        exceeds <varname>archive_ready_warning</varname> or <varname>archive_ready_critical</varname> respectively.
+      </simpara>
+     </listitem>
+
+     <listitem>
+      <simpara>
+        <literal>--downstream</literal>: checks that the expected downstream nodes are attached
+      </simpara>
+     </listitem>
+
+     <listitem>
+      <simpara>
+        <literal>--slots</literal>: checks there are no inactive physical replication slots
+      </simpara>
+     </listitem>
+
+     <listitem>
+      <simpara>
+        <literal>--missing-slots</literal>: checks there are no missing physical replication slots
+      </simpara>
+     </listitem>
+
+     <listitem>
+      <simpara>
+        <literal>--data-directory-config</literal>: checks the data directory configured in
+        <filename>repmgr.conf</filename> matches the actual data directory.
+        This check is not directly related to replication, but is useful to verify &repmgr;
+        is correctly configured.
+      </simpara>
+     </listitem>
+
+
+    </itemizedlist>
+  </para>
+  </refsect1>
+
+  <refsect1>
+    <title>Output format</title>
+    <para>
+      <itemizedlist spacing="compact" mark="bullet">
+
+        <listitem>
+          <simpara>
+            <literal>--csv</literal>: generate output in CSV format (not available
+            for individual checks)
+          </simpara>
+        </listitem>
+
+        <listitem>
+          <simpara>
+            <literal>--nagios</literal>: generate output in a Nagios-compatible format
+            (for individual checks only)
+          </simpara>
+        </listitem>
+      </itemizedlist>
+    </para>
+  </refsect1>
+
+  <refsect1>
+    <title>Exit codes</title>
+
+    <para>
+      When executing <command>repmgr node check</command> with one of the individual
+      checks listed above, &repmgr; will emit one of the following Nagios-style exit codes
+      (even if <literal>--nagios</literal> is not supplied):
+
+      <itemizedlist spacing="compact" mark="bullet">
+
+        <listitem>
+          <simpara>
+            <literal>0</literal>: OK
+          </simpara>
+        </listitem>
+
+        <listitem>
+          <simpara>
+            <literal>1</literal>: WARNING
+          </simpara>
+        </listitem>
+
+        <listitem>
+          <simpara>
+            <literal>2</literal>: ERROR
+          </simpara>
+        </listitem>
+
+        <listitem>
+          <simpara>
+            <literal>3</literal>: UNKNOWN
+          </simpara>
+        </listitem>
+
+      </itemizedlist>
+    </para>
+
+
+
+    <para>
+      One of the following exit codes will be emitted by <command>repmgr status check</command>
+      if no individual check was specified.
+    </para>
+
+    <variablelist>
+
+      <varlistentry>
+        <term><option>SUCCESS (0)</option></term>
+        <listitem>
+          <para>
+            No issues were detected.
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>ERR_NODE_STATUS (25)</option></term>
+        <listitem>
+          <para>
+            One or more issues were detected.
+          </para>
+        </listitem>
+      </varlistentry>
+
+   </variablelist>
+
+  </refsect1>
+
+
+
+  <refsect1>
+    <title>See also</title>
+    <para>
+     <xref linkend="repmgr-node-status">, <xref linkend="repmgr-cluster-show">
+    </para>
+  </refsect1>
+
+</refentry>
--- a/doc/repmgr-node-check.xml
+++ b/doc/repmgr-node-check.xml
@@ -1,308 +0,0 @@
-<refentry id="repmgr-node-check">
-  <indexterm>
-    <primary>repmgr node check</primary>
-  </indexterm>
-
-  <refmeta>
-    <refentrytitle>repmgr node check</refentrytitle>
-  </refmeta>
-
-  <refnamediv>
-    <refname>repmgr node check</refname>
-    <refpurpose>performs some health checks on a node from a replication perspective</refpurpose>
-  </refnamediv>
-
-  <refsect1>
-    <title>Description</title>
-    <para>
-      Performs some health checks on a node from a replication perspective.
-      This command must be run on the local node.
-    </para>
-	<note>
-	  <para>
-		Currently &repmgr; performs health checks on physical replication
-		slots only, with the aim of warning about streaming replication standbys which
-		have become detached and the associated risk of uncontrolled WAL file
-		growth.
-	  </para>
-	</note>
-  </refsect1>
-
-  <refsect1>
-    <title>Example</title>
-    <para>
-      Execution on the primary server:
-      <programlisting>
-       $ repmgr -f /etc/repmgr.conf node check
-       Node "node1":
-            Server role: OK (node is primary)
-            Replication lag: OK (N/A - node is primary)
-            WAL archiving: OK (0 pending files)
-            Upstream connection: OK (N/A - is primary)
-            Downstream servers: OK (2 of 2 downstream nodes attached)
-            Replication slots: OK (node has no physical replication slots)
-            Missing replication slots: OK (node has no missing physical replication slots)
-            Configured data directory: OK (configured "data_directory" is "/var/lib/postgresql/data")</programlisting>
-    </para>
-    <para>
-      Execution on a standby server:
-      <programlisting>
-       $ repmgr -f /etc/repmgr.conf node check
-       Node "node2":
-            Server role: OK (node is standby)
-            Replication lag: OK (0 seconds)
-            WAL archiving: OK (0 pending archive ready files)
-            Upstream connection: OK (node "node2" (ID: 2) is attached to expected upstream node "node1" (ID: 1))
-            Downstream servers: OK (this node has no downstream nodes)
-            Replication slots: OK (node has no physical replication slots)
-            Missing physical replication slots: OK (node has no missing physical replication slots)
-            Configured data directory: OK (configured "data_directory" is "/var/lib/postgresql/data")</programlisting>
-    </para>
-  </refsect1>
-  <refsect1>
-    <title>Individual checks</title>
-    <para>
-      Each check can be performed individually by supplying
-      an additional command line parameter, e.g.:
-      <programlisting>
-        $ repmgr node check --role
-        OK (node is primary)</programlisting>
-    </para>
-    <para>
-	  Parameters for individual checks are as follows:
-    <itemizedlist spacing="compact" mark="bullet">
-
-     <listitem>
-      <simpara>
-        <option>--role</option>: checks if the node has the expected role
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--replication-lag</option>: checks if the node is lagging by more than
-        <varname>replication_lag_warning</varname> or <varname>replication_lag_critical</varname>
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--archive-ready</option>: checks for WAL files which have not yet been archived,
-        and returns <literal>WARNING</literal> or <literal>CRITICAL</literal> if the number
-        exceeds <varname>archive_ready_warning</varname> or <varname>archive_ready_critical</varname> respectively.
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--downstream</option>: checks that the expected downstream nodes are attached
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--upstream</option>: checks that the node is attached to its expected upstream
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--slots</option>: checks there are no inactive physical replication slots
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--missing-slots</option>: checks there are no missing physical replication slots
-      </simpara>
-     </listitem>
-
-     <listitem>
-      <simpara>
-        <option>--data-directory-config</option>: checks the data directory configured in
-        <filename>repmgr.conf</filename> matches the actual data directory.
-        This check is not directly related to replication, but is useful to verify &repmgr;
-        is correctly configured.
-      </simpara>
-     </listitem>
-    </itemizedlist>
-  </para>
-  </refsect1>
-
-
-  <refsect1>
-    <title>repmgrd</title>
-    <para>
-      A separate check is available to verify whether &repmgrd; is running,
-      This is not included in the general output, as this does not
-      per-se constitute a check of the node's replication status.
-    </para>
-    <itemizedlist spacing="compact" mark="bullet">
-     <listitem>
-      <simpara>
-        <option>--repmgrd</option>: checks whether &repmgrd; is running.
-        If &repmgrd; is running but paused, status <literal>1</literal>
-        (<literal>WARNING</literal>) is returned.
-      </simpara>
-     </listitem>
-    </itemizedlist>
-  </refsect1>
-
-  <refsect1>
-    <title>Additional checks</title>
-    <para>
-      Several checks are provided for diagnostic purposes and are not
-      included in the general output:
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <option>--db-connection</option>: checks if &repmgr; can connect to the
-            database on the local node.
-          </simpara>
-          <simpara>
-            This option is particularly useful in combination with <command>SSH</command>, as
-            it can be used to troubleshoot connection issues encountered when &repmgr; is
-            executed remotely (e.g. during a switchover operation).
-          </simpara>
-
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <option>--replication-config-owner</option>: checks if the file containing replication
-            configuration (PostgreSQL 12 and later: <filename>postgresql.auto.conf</filename>;
-            PostgreSQL 11 and earlier: <filename>recovery.conf</filename>) is
-            owned by the same user who owns the data directory.
-          </simpara>
-          <simpara>
-            Incorrect ownership of these files (e.g. if they are owned by <literal>root</literal>)
-            will cause operations which need to update the replication configuration
-            (e.g. <link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>
-            or <link linkend="repmgr-standby-promote"><command>repmgr standby promote</command></link>)
-            to fail.
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Connection options</title>
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <option>-S</option>/<option>--superuser</option>: connect as the
-            named superuser instead of the &repmgr; user
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Output format</title>
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <option>--csv</option>: generate output in CSV format (not available
-            for individual checks)
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <option>--nagios</option>: generate output in a Nagios-compatible format
-            (for individual checks only)
-          </simpara>
-        </listitem>
-      </itemizedlist>
-    </para>
-  </refsect1>
-
-
-
-  <refsect1>
-    <title>Exit codes</title>
-
-    <para>
-      When executing <command>repmgr node check</command> with one of the individual
-      checks listed above, &repmgr; will emit one of the following Nagios-style exit codes
-      (even if <option>--nagios</option> is not supplied):
-
-      <itemizedlist spacing="compact" mark="bullet">
-
-        <listitem>
-          <simpara>
-            <literal>0</literal>: OK
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>1</literal>: WARNING
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>2</literal>: ERROR
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <literal>3</literal>: UNKNOWN
-          </simpara>
-        </listitem>
-
-      </itemizedlist>
-    </para>
-
-
-
-    <para>
-      One of the following exit codes will be emitted by <command>repmgr status check</command>
-      if no individual check was specified.
-    </para>
-
-    <variablelist>
-
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            No issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>ERR_NODE_STATUS (25)</option></term>
-        <listitem>
-          <para>
-            One or more issues were detected.
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-
-  </refsect1>
-
-
-
-  <refsect1>
-    <title>See also</title>
-    <para>
-     <xref linkend="repmgr-node-status"/>, <xref linkend="repmgr-cluster-show"/>
-    </para>
-  </refsect1>
-
-</refentry>
--- a/doc/repmgr-node-rejoin.sgml
+++ b/doc/repmgr-node-rejoin.sgml
@@ -22,18 +22,14 @@
      This can optionally use <application>pg_rewind</application> to re-integrate
      a node which has diverged from the rest of the cluster, typically a failed primary.
    </para>
-    <para>
-      Note that <command>repmgr node rejoin</command> can only be used to attach
-      a standby to the current primary, not another standby.
-    </para>

    <tip>
      <para>
        If the node is running and needs to be attached to the current primary, use
-        <xref linkend="repmgr-standby-follow"/>.
+        <xref linkend="repmgr-standby-follow">.
      </para>
      <para>
-        Note <xref linkend="repmgr-standby-follow"/> can only be used for standbys which have not diverged
+        Note <xref linkend="repmgr-standby-follow"> can only be used for standbys which have not diverged
        from the rest of the cluster.
      </para>
    </tip>
@@ -47,12 +43,7 @@
      <programlisting>
      repmgr node rejoin -d '$conninfo'</programlisting>

-      where <literal>$conninfo</literal> is the PostgreSQL <literal>conninfo</literal> string of the
-      <emphasis>current</emphasis> primary node (or that of any reachable node in the cluster, but
-      <emphasis>not</emphasis> the local node). This is so that &repmgr; can fetch up-to-date information
-      about the current state of the cluster.
-    </para>
-    <para>
+      where <literal>$conninfo</literal> is the conninfo string of any reachable node in the cluster.
      <filename>repmgr.conf</filename> for the stopped node *must* be supplied explicitly if not
      otherwise available.
    </para>
@@ -73,16 +64,16 @@
      </varlistentry>

      <varlistentry>
-        <term><option>--force-rewind</option></term>
+        <term><option>--force-rewind[=/path/to/pg_rewind]</option></term>
        <listitem>
          <para>
            Execute <application>pg_rewind</application>.
          </para>
          <para>
-            See <xref linkend="repmgr-node-rejoin-pg-rewind"/> for more details on using
-            <application>pg_rewind</application>.
+            It is only necessary to provide the <application>pg_rewind</application> path
+            if using PostgreSQL 9.3 or 9.4, and <application>pg_rewind</application>
+            is not installed in the PostgreSQL <filename>bin</filename> directory.
          </para>
-
        </listitem>
      </varlistentry>

@@ -216,18 +207,9 @@
      a standby to the current primary, not another standby.
    </para>
    <para>
-      The node's PostgreSQL instance  must have been shut down cleanly. If this was not the
-      case, it will need to be started up until it has reached a consistent recovery point,
-      then shut down cleanly.
-    </para>
-    <para>
-      In PostgreSQL 13 and later, this will be done automatically
-      if the <option>--force-rewind</option> is provided (even if an actual rewind
-      is not necessary).
-    </para>
-    <para>
-      With PostgreSQL 12 and earlier, PostgreSQL will need to
-      be started and shut down manually; see below for the best way to do this.
+      The node must have been shut down cleanly; if this was not the case, it will
+      need to be manually started (remove any existing <filename>recovery.conf</filename> file first)
+      until it has reached a consistent recovery point, then shut down cleanly.
    </para>
    <tip>
      <para>
@@ -239,28 +221,26 @@
          rm -f /var/lib/pgsql/data/recovery.conf
          postgres --single -D /var/lib/pgsql/data/ &lt; /dev/null</programlisting>
      </para>
-      <para>
-        Note that  <filename>standby.signal</filename> (PostgreSQL 11 and earlier:
-        <filename>recovery.conf</filename>) <emphasis>must</emphasis> be removed
-        from the data directory for PostgreSQL to be able to start in single
-        user mode.
-      </para>
    </tip>
-
+    <para>
+      &repmgr; will attempt to verify whether the node can rejoin as-is, or whether
+      <command>pg_rewind</command> must be used (see following section).
+    </para>
  </refsect1>

  <refsect1 id="repmgr-node-rejoin-pg-rewind" xreflabel="Using pg_rewind">

-   <title>Using <command>pg_rewind</command></title>
-
   <indexterm>
      <primary>pg_rewind</primary>
      <secondary>using with "repmgr node rejoin"</secondary>
    </indexterm>

+    <title>Using <command>pg_rewind</command></title>
    <para>
      <command>repmgr node rejoin</command> can optionally use <command>pg_rewind</command> to re-integrate a
      node which has diverged from the rest of the cluster, typically a failed primary.
+      <command>pg_rewind</command> is available in PostgreSQL 9.5 and later as part of the core distribution,
+      and can be installed from external sources for PostgreSQL 9.3 and 9.4.
    </para>
    <note>
      <para>
@@ -269,10 +249,6 @@
        data checksums were enabled when the cluster was initialized. See the
        <ulink url="https://www.postgresql.org/docs/current/app-pgrewind.html"><command>pg_rewind</command> documentation</ulink> for details.
      </para>
-      <para>
-        Additionally, <varname>full_page_writes</varname> must be enabled; this is the default and
-        normally should never be disabled.
-      </para>
    </note>

    <para>
@@ -287,7 +263,6 @@
      <programlisting>
    $ repmgr node rejoin -f /etc/repmgr.conf -d 'host=node3 dbname=repmgr user=repmgr' \
        --force-rewind --config-files=postgresql.local.conf,postgresql.conf --verbose --dry-run
-    NOTICE: rejoin target is node "node3" (node ID: 3)
    INFO: replication connection to the rejoin target node was successful
    INFO: local and rejoin target system identifiers match
    DETAIL: system identifier is 6652184002263212600
@@ -307,15 +282,7 @@
      to execute <command>pg_rewind</command> to ensure the node can be rejoined successfully.
    </para>

-    <refsect2 id="repmgr-node-rejoin-pg-rewind-config-files" xreflabel="pg_rewind and configuration files">
-
-      <title><command>pg_rewind</command> and configuration file retention</title>
-
-      <indexterm>
-        <primary>pg_rewind</primary>
-        <secondary>configuration file retention</secondary>
-      </indexterm>
-
+    <important>
      <para>
        Be aware that if <command>pg_rewind</command> is executed and actually performs a
        rewind operation, any configuration files in the PostgreSQL data directory will be
@@ -323,30 +290,19 @@
      </para>
      <para>
        To prevent this happening, provide a comma-separated list of files to retain
-        using the <option>--config-file</option> command line option; the specified files
+        using the <literal>--config-file</literal> command line option; the specified files
        will be archived in a temporary directory (whose parent directory can be specified with
-        <option>--config-archive-dir</option>, default: <filename>/tmp</filename>)
-        and restored once the rewind operation is complete.
+        <literal>--config-archive-dir</literal>) and restored once the rewind operation is
+        complete.
      </para>
-    </refsect2>
+    </important>

-    <refsect2 id="repmgr-node-rejoin-pg-rewind-example" xreflabel="example using repmgr node rejoin and pg_rewind">
-
-      <title>Example using <command>repmgr node rejoin</command> and <command>pg_rewind</command></title>
-
-      <indexterm>
-        <primary>pg_rewind</primary>
-        <secondary>configuration file retention</secondary>
-      </indexterm>
-
-
-      <para>
-        Example, first using <option>--dry-run</option>, then actually executing the
-        <literal>node rejoin command</literal>.
-        <programlisting>
+    <para>
+      Example, first using <literal>--dry-run</literal>, then actually executing the
+      <literal>node rejoin command</literal>.
+    <programlisting>
    $ repmgr node rejoin -f /etc/repmgr.conf -d 'host=node3 dbname=repmgr user=repmgr' \
        --config-files=postgresql.local.conf,postgresql.conf --verbose --force-rewind --dry-run
-    NOTICE: rejoin target is node "node3" (node ID: 3)
    INFO: replication connection to the rejoin target node was successful
    INFO: local and rejoin target system identifiers match
    DETAIL: system identifier is 6652460429293670710
@@ -360,17 +316,17 @@
      pg_rewind -D '/var/lib/postgresql/data' --source-server='host=node3 dbname=repmgr user=repmgr'
    INFO: prerequisites for executing NODE REJOIN are met</programlisting>

-        <note>
-          <para>
-            If <option>--force-rewind</option> is used with the <option>--dry-run</option> option,
-            this checks the prerequisites for using <application>pg_rewind</application>, but is
-            not an absolute guarantee that actually executing <application>pg_rewind</application>
-            will succeed. See also section <xref linkend="repmgr-node-rejoin-caveats"/> below.
-          </para>
+    <note>
+      <para>
+        If <option>--force-rewind</option> is used with the <option>--dry-run</option> option,
+        this checks the prerequisites for using <application>pg_rewind</application>, but is
+        not an absolute guarantee that actually executing <application>pg_rewind</application>
+        will succeed. See also section <xref linkend="repmgr-node-rejoin-caveats"> below.
+      </para>

-        </note>
+    </note>

-        <programlisting>
+    <programlisting>
    $ repmgr node rejoin -f /etc/repmgr.conf -d 'host=node3 dbname=repmgr user=repmgr' \
        --config-files=postgresql.local.conf,postgresql.conf --verbose --force-rewind
    NOTICE: pg_rewind execution required for this node to attach to rejoin target node 3
@@ -382,47 +338,23 @@
    NOTICE: starting server using "pg_ctl -l /var/log/postgres/startup.log -w -D '/var/lib/pgsql/data' start"
    NOTICE: NODE REJOIN successful
    DETAIL: node 2 is now attached to node 3</programlisting>
-      </para>
-    </refsect2>
+    </para>

-    <refsect2 id="repmgr-node-rejoin-postgresql-94" xreflabel="pg_rewind and PostgreSQL 9.4">
-
-      <title><command>pg_rewind</command> and PostgreSQL 9.4</title>
-
-      <indexterm>
-        <primary>pg_rewind</primary>
-        <secondary>PostgreSQL 9.4</secondary>
-      </indexterm>
-
-      <para>
-        <application>pg_rewind</application> is available in PostgreSQL 9.5 and later as part of the core distribution.
-        Users of PostgreSQL 9.4 will need to manually install it; the source code is available here:
-        <ulink url="https://github.com/vmware/pg_rewind">https://github.com/vmware/pg_rewind</ulink>.
-        If the <application>pg_rewind</application>
-        binary is not installed in the PostgreSQL <filename>bin</filename> directory, provide
-        its full path  on the demotion candidate  with <option>--force-rewind</option>.
-      </para>
-      <para>
-        Note that building the 9.4 version of <application>pg_rewind</application> requires the PostgreSQL
-        source code.
-      </para>
-    </refsect2>
  </refsect1>

  <refsect1 id="repmgr-node-rejoin-caveats" xreflabel="Caveats">

-   <title>Caveats when using <command>repmgr node rejoin</command></title>
-
   <indexterm>
-     <primary>repmgr node rejoin</primary>
-     <secondary>caveats</secondary>
-   </indexterm>
+      <primary>repmgr node rejoin</primary>
+      <secondary>caveats</secondary>
+    </indexterm>

+   <title>Caveats when using <command>repmgr node rejoin</command></title>
   <para>
     <command>repmgr node rejoin</command> attempts to determine whether it will succeed by
     comparing the timelines and relative WAL positions of the local node (rejoin candidate) and primary
     (rejoin target). This is particularly important if planning to use <application>pg_rewind</application>,
-     which currently (as of PostgreSQL 12) may appear to succeed (or indicate there is no action
+     which currently (as of PostgreSQL 11) may appear to succeed (or indicate there is no action
     needed) but potentially allow an impossible action, such as trying to rejoin a standby to a
     primary which is behind the standby. &repmgr; will prevent this situation from occurring.
   </para>
@@ -435,11 +367,6 @@
     the current standby's PostgreSQL log will contain entries with the text
     &quot;<literal>record with incorrect prev-link</literal>&quot;.
   </para>
-   <para>
-     In PostgreSQL 9.5 and earlier, it is <emphasis>not</emphasis> possible to use
-     <application>pg_rewind</application> to attach to a target node with a lower
-     timeline than the local node.
-   </para>
   <para>
     We strongly recommend running <command>repmgr node rejoin</command> with the
     <option>--dry-run</option> option first. Additionally it might be a good idea
@@ -449,57 +376,12 @@
     is running in <option>--dry-run</option> mode.
   </para>

-   <warning>
-     <para>
-       In all PostgreSQL released before February 2021, <application>pg_rewind</application>
-       contains a corner-case bug which affects standbys in a very specific situation.
-     </para>
-     <para>
-       This situation occurs when a standby was shut down <emphasis>before</emphasis> its
-       primary node, and an attempt is made to attach this standby to another primary
-       in the same cluster (following a &quot;split brain&quot; situation where the standby
-       was connected to the wrong primary). In this case, &repmgr; will correctly determine
-       that <application>pg_rewind</application> should be executed, however
-       <application>pg_rewind</application> incorrectly decides that no action is necessary.
-     </para>
-     <para>
-       In this situation, &repmgr; will report something like:
-<programlisting>
-    NOTICE: pg_rewind execution required for this node to attach to rejoin target node 1
-    DETAIL: rejoin target server's timeline 3 forked off current database system timeline 2 before current recovery point 0/7019C10</programlisting>
-       but when executed, <application>pg_rewind</application> will report:
-<programlisting>
-    pg_rewind: servers diverged at WAL location 0/7015540 on timeline 2
-    pg_rewind: no rewind required</programlisting>
-       and if an attempt is made to attach the standby to the new primary, PostgreSQL logs on the standby
-       will contain errors like:
-<programlisting>
-    [2020-09-07 15:01:41 UTC]    LOG:  00000: replication terminated by primary server
-    [2020-09-07 15:01:41 UTC]    DETAIL:  End of WAL reached on timeline 2 at 0/7015540.
-    [2020-09-07 15:01:41 UTC]    LOG:  00000: new timeline 3 forked off current database system timeline 2 before current recovery point 0/7019C10</programlisting>
-     </para>
-     <para>
-       Currently it is not possible to resolve this situation using <application>pg_rewind</application>.
-       A <ulink url="https://git.postgresql.org/gitweb/?p=postgresql.git;a=commit;h=2b4f3130382fe2f8705863e4d38589d4d69cd695">patch</ulink>
-       was submitted and is included in all PostgreSQL versions released in February 2021 or later.
-     </para>
-     <para>
-       As a workaround, start the primary server the standby was previously attached to,
-       and ensure the standby can be attached to it. If <application>pg_rewind</application> was actually executed,
-       it will have copied in the <filename>.history</filename> file from the target primary server; this must
-       be removed. <command>repmgr node rejoin</command> can then be used to attach the standby to the original
-       primary. Ensure any changes pending on the primary have propagated to the standby. Then shut down the primary
-       server <emphasis>first</emphasis>, before shutting down the standby. It should then be possible to
-       use <command>repmgr node rejoin</command> to attach the standby to the new primary.
-     </para>
-   </warning>
-
  </refsect1>

  <refsect1>
    <title>See also</title>
    <para>
-     <xref linkend="repmgr-standby-follow"/>, <xref linkend="repmgr-standby-switchover"/>
+     <xref linkend="repmgr-standby-follow">
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-node-service.sgml
+++ b/doc/repmgr-node-service.sgml
@@ -75,22 +75,8 @@
          <para>
            Issue a <command>CHECKPOINT</command> before stopping or restarting the node.
          </para>
-          <para>
-            Note that a superuser connection is required to be able to execute the
-             <command>CHECKPOINT</command> command.
-          </para>
        </listitem>
     </varlistentry>
-
-     <varlistentry>
-        <term><option>-S</option>/<option>--superuser</option></term>
-        <listitem>
-          <para>
-           Connect as the named superuser instead of the normal &repmgr; user.
-          </para>
-        </listitem>
-     </varlistentry>
-
    </variablelist>

  </refsect1>
@@ -128,38 +114,38 @@
    <para>
      See what action would be taken for a restart:
      <programlisting>
-[postgres@node1 ~]$ repmgr -f /etc/repmgr/12/repmgr.conf node service --action=restart --checkpoint --dry-run
+[postgres@node1 ~]$ repmgr -f /etc/repmgr/11/repmgr.conf node service --action=restart --checkpoint --dry-run
 INFO: a CHECKPOINT would be issued here
-INFO: would execute server command "sudo service postgresql-12 restart"</programlisting>
+INFO: would execute server command "sudo service postgresql-11 restart"</programlisting>
    </para>

    <para>
      Restart the PostgreSQL instance:
      <programlisting>
-[postgres@node1 ~]$ repmgr -f /etc/repmgr/12/repmgr.conf node service --action=restart --checkpoint
+[postgres@node1 ~]$ repmgr -f /etc/repmgr/11/repmgr.conf node service --action=restart --checkpoint
 NOTICE: issuing CHECKPOINT
-DETAIL: executing server command "sudo service postgresql-12 restart"
-Redirecting to /bin/systemctl restart postgresql-12.service</programlisting>
+DETAIL: executing server command "sudo service postgresql-11 restart"
+Redirecting to /bin/systemctl restart postgresql-11.service</programlisting>
    </para>

    <para>
      List all commands:
      <programlisting>
-[postgres@node1 ~]$ repmgr -f /etc/repmgr/12/repmgr.conf node service --list-actions
+[postgres@node1 ~]$ repmgr -f /etc/repmgr/11/repmgr.conf node service --list-actions
 Following commands would be executed for each action:

-    start: "sudo service postgresql-12 start"
-     stop: "sudo service postgresql-12 stop"
-  restart: "sudo service postgresql-12 restart"
-   reload: "sudo service postgresql-12 reload"
-  promote: "/usr/pgsql-12/bin/pg_ctl  -w -D '/var/lib/pgsql/12/data' promote"</programlisting>
+    start: "sudo service postgresql-11 start"
+     stop: "sudo service postgresql-11 stop"
+  restart: "sudo service postgresql-11 restart"
+   reload: "sudo service postgresql-11 reload"
+  promote: "/usr/pgsql-11/bin/pg_ctl  -w -D '/var/lib/pgsql/11/data' promote"</programlisting>
    </para>

    <para>
      List a single command:
      <programlisting>
-[postgres@node1 ~]$ repmgr -f /etc/repmgr/12/repmgr.conf node service --list-actions --action=promote
-/usr/pgsql-12/bin/pg_ctl  -w -D '/var/lib/pgsql/12/data' promote      </programlisting>
+[postgres@node1 ~]$ repmgr -f /etc/repmgr/11/repmgr.conf node service --list-actions --action=promote
+/usr/pgsql-11/bin/pg_ctl  -w -D '/var/lib/pgsql/11/data' promote      </programlisting>
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-node-status.sgml
+++ b/doc/repmgr-node-status.sgml
@@ -84,7 +84,7 @@
  <refsect1>
    <title>See also</title>
    <para>
-      See <xref linkend="repmgr-node-check"/> to diagnose issues and <xref linkend="repmgr-cluster-show"/>
+      See <xref linkend="repmgr-node-check"> to diagnose issues and <xref linkend="repmgr-cluster-show">
      for an overview of all nodes in the cluster.
    </para>
  </refsect1>
--- a/doc/repmgr-primary-register.sgml
+++ b/doc/repmgr-primary-register.sgml
@@ -24,15 +24,10 @@

    <note>
      <para>
-        &repmgr; will attempt to install the &repmgr; extension as part of this command,
-        however this will fail if the <literal>repmgr</literal> user is not a superuser.
-      </para>
-      <para>
-        It's possible to install the &repmgr; extension manually before executing
+        It's possibly to install the &repmgr; extension manually before executing
        <command>repmgr primary register</command>; in this case &repmgr; will
        detect the presence of the extension and skip that step.
      </para>
- 
    </note>

  </refsect1>
@@ -43,42 +38,25 @@
      Execute with the <option>--dry-run</option> option to check what would happen without
      actually registering the primary.
    </para>
+    <para>
+      <command>repmgr master register</command> can be used as an alias for
+      <command>repmgr primary register</command>.
+    </para>

    <note>
      <para>
        If providing the configuration file location with <option>-f/--config-file</option>,
        avoid using a relative path, as &repmgr; stores the configuration file location
        in the repmgr metadata for use when &repmgr; is executed remotely (e.g. during
-        <xref linkend="repmgr-standby-switchover"/>). &repmgr; will attempt to convert the
+        <xref linkend="repmgr-standby-switchover">). &repmgr; will attempt to convert the
          a relative path into an absolute one, but this may not be the same as the path you
          would explicitly provide (e.g. <filename>./repmgr.conf</filename> might be converted
          to <filename>/path/to/./repmgr.conf</filename>, whereas you'd normally write
          <filename>/path/to/repmgr.conf</filename>).
      </para>
    </note>
-
-	<para>
-      <command>repmgr master register</command> can be used as an alias for
-      <command>repmgr primary register</command>.
-    </para>
-
  </refsect1>

-  <refsect1>
-    <title>User permission requirements</title>
-    <para>
-      The <literal>repmgr</literal> user must be a superuser in order for &repmgr;
-      to be able to install the <literal>repmgr</literal> extension.
-    </para>
-    <para>
-      If this is not the case, the <literal>repmgr</literal> extension can be installed
-      manually before executing <command>repmgr primary register</command>.
-    </para>
-    <para>
-      A future &repmgr; release will enable the provision of a <option>--superuser</option>
-      name for the installation of the extension.
-    </para>
-  </refsect1>
  <refsect1>

    <title>Options</title>
--- a/doc/repmgr-primary-unregister.sgml
+++ b/doc/repmgr-primary-unregister.sgml
@@ -60,17 +60,6 @@
        </listitem>
      </varlistentry>

-     <varlistentry>
-        <term><option>--force</option></term>
-        <listitem>
-          <para>
-            Forcibly unregister the node if it is registered as an active primary,
-            as long as it has no registered standbys; or if it is registered as
-            a primary but running as a standby.
-          </para>
-        </listitem>
-      </varlistentry>
-
    </variablelist>

  </refsect1>
--- a/doc/repmgr-service-status.xml
+++ b/doc/repmgr-service-status.xml
@@ -1,215 +0,0 @@
-<refentry id="repmgr-service-status">
-  <indexterm>
-    <primary>repmgr service status</primary>
-  </indexterm>
-
-  <indexterm>
-    <primary>repmgrd</primary>
-    <secondary>displaying service status</secondary>
-  </indexterm>
-
-  <refmeta>
-    <refentrytitle>repmgr service status</refentrytitle>
-  </refmeta>
-
-  <refnamediv>
-    <refname>repmgr service status</refname>
-    <refpurpose>display information about the status of &repmgrd; on each node in the cluster</refpurpose>
-  </refnamediv>
-
-  <refsect1>
-    <title>Description</title>
-    <para>
-      This command provides an overview over all active nodes in the cluster and the state
-      of each node's &repmgrd; instance. It can be used to check
-      the result of <xref linkend="repmgr-service-pause"/> and <xref linkend="repmgr-service-unpause"/>
-      operations.
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Prerequisites</title>
-    <para>
-      PostgreSQL should be accessible on all nodes (using the <varname>conninfo</varname> string shown by
-      <link linkend="repmgr-cluster-show"><command>repmgr cluster show</command></link>)
-      from the node where <command>repmgr service status</command> is executed.
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Execution</title>
-    <para>
-      <command>repmgr service status</command> can be executed on any active node in the
-      replication cluster. A valid <filename>repmgr.conf</filename> file is required.
-    </para>
-    <para>
-      If a node is not accessible, or PostgreSQL itself is not running on the node,
-      &repmgr; will not be able to determine the status of that node's &repmgrd; instance,
-      and &quot;<literal>n/a</literal>&quot; will be displayed in the node's <literal>repmgrd</literal>
-      column.
-    </para>
-
-    <note>
-      <para>
-        After restarting PostgreSQL on any node, the &repmgrd; instance
-        will take a second or two before it is able to update its status. Until then,
-        &repmgrd; will be shown as not running.
-      </para>
-    </note>
-
-  </refsect1>
-
-  <refsect1>
-    <title>Examples</title>
-    <para>
-      &repmgrd; running normally on all nodes:
-    <programlisting>$ repmgr -f /etc/repmgr.conf service status
- ID | Name  | Role    | Status    | Upstream | repmgrd | PID   | Paused? | Upstream last seen
----+-------+---------+-----------+----------+---------+-------+---------+--------------------
- 1  | node1 | primary | * running |          | running | 96563 | no      | n/a
- 2  | node2 | standby |   running | node1    | running | 96572 | no      | 1 second(s) ago
- 3  | node3 | standby |   running | node1    | running | 96584 | no      | 0 second(s) ago</programlisting>
-    </para>
-
-    <para>
-      &repmgrd; paused on all nodes (using <xref linkend="repmgr-service-pause"/>):
-    <programlisting>$ repmgr -f /etc/repmgr.conf service status
- ID | Name  | Role    | Status    | Upstream | repmgrd | PID   | Paused? | Upstream last seen
----+-------+---------+-----------+----------+---------+-------+---------+--------------------
- 1  | node1 | primary | * running |          | running | 96563 | yes     | n/a
- 2  | node2 | standby |   running | node1    | running | 96572 | yes     | 1 second(s) ago
- 3  | node3 | standby |   running | node1    | running | 96584 | yes     | 0 second(s) ago</programlisting>
-    </para>
-
-    <para>
-      &repmgrd; not running on one node:
-    <programlisting>$ repmgr -f /etc/repmgr.conf service status
- ID | Name  | Role    | Status    | Upstream | repmgrd     | PID   | Paused? | Upstream last seen
----+-------+---------+-----------+----------+-------------+-------+---------+--------------------
- 1  | node1 | primary | * running |          | running     | 96563 | yes     | n/a
- 2  | node2 | standby |   running | node1    | not running | n/a   | n/a     | n/a
- 3  | node3 | standby |   running | node1    | running     | 96584 | yes     | 0 second(s) ago</programlisting>
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Options</title>
-
-    <variablelist>
-
-      <varlistentry>
-        <term><option>--csv</option></term>
-        <listitem>
-          <para>
-            <command>repmgr service status</command> accepts an optional parameter <literal>--csv</literal>, which
-            outputs the replication cluster's status in a simple CSV format, suitable for
-            parsing by scripts, e.g.:
-            <programlisting>
-    $ repmgr -f /etc/repmgr.conf service status --csv
-    1,node1,primary,1,1,5722,1,100,-1,default
-    2,node2,standby,1,0,-1,1,100,1,default
-    3,node3,standby,1,1,5779,1,100,1,default</programlisting>
-          </para>
-          <para>
-            The columns have following meanings:
-            <itemizedlist spacing="compact" mark="bullet">
-              <listitem>
-                <simpara>
-                  node ID
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  node name
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  node type (primary or standby)
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  PostgreSQL server running (1 = running, 0 = not running)
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  &repmgrd; running (1 = running, 0 = not running, -1 = unknown)
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  &repmgrd; PID (-1 if not running or status unknown)
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  &repmgrd; paused (1 = paused, 0 = not paused, -1 = unknown)
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  &repmgrd; node priority
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  interval in seconds since the node's upstream was last seen (this will be -1 if the value could not be retrieved, or the node is primary)
-                </simpara>
-              </listitem>
-
-			  <listitem>
-                <simpara>
-                  node location
-                </simpara>
-              </listitem>
-
-            </itemizedlist>
-          </para>
-        </listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-        <term><option>--detail</option></term>
-        <listitem>
-          <para>
-            Display additional information (<literal>location</literal>, <literal>priority</literal>)
-	    about the &repmgr; configuration.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--verbose</option></term>
-        <listitem>
-          <para>
-            Display the full text of any database connection error messages.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-
-  </refsect1>
-
-  <refsect1>
-    <title>See also</title>
-    <para>
-      <xref linkend="repmgr-service-pause"/>,
-      <xref linkend="repmgr-service-unpause"/>,
-      <xref linkend="repmgr-cluster-show"/>,
-      <xref linkend="repmgrd-pausing"/>,
-      <xref linkend="repmgr-daemon-start"/>,
-      <xref linkend="repmgr-daemon-stop"/>
-    </para>
-  </refsect1>
-</refentry>
--- a/doc/repmgr-standby-clone.sgml
+++ b/doc/repmgr-standby-clone.sgml
@@ -18,7 +18,7 @@
    <para>
      <command>repmgr standby clone</command> clones a PostgreSQL node from another
      PostgreSQL node, typically the primary, but optionally from any other node in
-      the cluster or from Barman. It creates the replication configuration required
+      the cluster or from Barman. It creates the <filename>recovery.conf</filename> file required
      to attach the cloned node to the primary node (or another standby, if cascading replication
      is in use).
    </para>
@@ -85,25 +85,27 @@
  </refsect1>

  <refsect1 id="repmgr-standby-clone-recovery-conf">
-    <title>Customising replication configuration</title>
-    <indexterm>
+   <indexterm>
     <primary>recovery.conf</primary>
     <secondary>customising with &quot;repmgr standby clone&quot;</secondary>
-    </indexterm>
-
-	<indexterm>
-     <primary>replication configuration</primary>
-     <secondary>customising with &quot;repmgr standby clone&quot;</secondary>
-    </indexterm>
-
+   </indexterm>

+   <title>Customising recovery.conf</title>
   <para>
-     By default, &repmgr; will create a minimal replication configuration
+     By default, &repmgr; will create a minimal <filename>recovery.conf</filename>
     containing following parameters:
   </para>

   <itemizedlist spacing="compact" mark="bullet">

+     <listitem>
+       <simpara><varname>standby_mode</varname> (always <literal>'on'</literal>)</simpara>
+     </listitem>
+
+     <listitem>
+       <simpara><varname>recovery_target_timeline</varname> (always <literal>'latest'</literal>)</simpara>
+     </listitem>
+
     <listitem>
       <simpara><varname>primary_conninfo</varname></simpara>
     </listitem>
@@ -114,24 +116,9 @@

   </itemizedlist>

-   <para>
-     For PostgreSQL 11 and earlier, these parameters will also be set:
-   </para>
-
-   <itemizedlist spacing="compact" mark="bullet">
-     <listitem>
-       <simpara><varname>standby_mode</varname> (always <literal>'on'</literal>)</simpara>
-     </listitem>
-
-     <listitem>
-       <simpara><varname>recovery_target_timeline</varname> (always <literal>'latest'</literal>)</simpara>
-     </listitem>
-   </itemizedlist>
-
-
   <para>
     The following additional parameters can be specified in <filename>repmgr.conf</filename>
-     for inclusion in the replication configuration:
+     for inclusion in <filename>recovery.conf</filename>:
   </para>

   <itemizedlist spacing="compact" mark="bullet">
@@ -155,7 +142,7 @@
       We recommend using <ulink url="https://www.pgbarman.org/">Barman</ulink> to manage
       WAL file archiving. For more details on combining &repmgr; and <application>Barman</application>,
       in particular using <varname>restore_command</varname> to configure Barman as a backup source of
-       WAL files, see <xref linkend="cloning-from-barman"/>.
+       WAL files, see <xref linkend="cloning-from-barman">.
     </para>
   </note>

@@ -167,7 +154,7 @@
    When initially cloning a standby, you will need to ensure
    that all required WAL files remain available while the cloning is taking
    place. To ensure this happens when using the default <command>pg_basebackup</command> method,
-    &repmgr; will set <command>pg_basebackup</command>'s <literal>--wal-method</literal>
+    &repmgr; will set <command>pg_basebackup</command>'s <literal>--xlog-method</literal>
    parameter to <literal>stream</literal>,
    which will ensure all WAL files generated during the cloning process are
    streamed in parallel with the main backup. Note that this requires two
@@ -177,112 +164,64 @@
   </para>
   <para>
    To override this behaviour, in <filename>repmgr.conf</filename> set
-    <command>pg_basebackup</command>'s <literal>--wal-method</literal>
+    <command>pg_basebackup</command>'s <literal>--xlog-method</literal>
    parameter to <literal>fetch</literal>:
    <programlisting>
-      pg_basebackup_options='--wal-method=fetch'</programlisting>
+      pg_basebackup_options='--xlog-method=fetch'</programlisting>

-    and ensure that <literal>wal_keep_segments</literal> (PostgreSQL 13 and later:
-    <literal>wal_keep_size</literal>) is set to an appropriately high value. Note
-    however that this is not a particularly reliable way of ensuring sufficient
-    WAL is retained and is not recommended.
+    and ensure that <literal>wal_keep_segments</literal> is set to an appropriately high value.
    See the <ulink url="https://www.postgresql.org/docs/current/app-pgbasebackup.html">
    pg_basebackup</ulink> documentation for details.
   </para>

   <note>
    <simpara>
-      If using PostgreSQL 9.6 or earlier, replace <literal>--wal-method</literal>
-      with <literal>--xlog-method</literal>.
+      From PostgreSQL 10, <command>pg_basebackup</command>'s
+      <literal>--xlog-method</literal> parameter has been renamed to
+      <literal>--wal-method</literal>.
    </simpara>
   </note>
  </refsect1>

-  <refsect1 id="repmgr-standby-clone-wal-directory">

-   <title>Placing WAL files into a different directory</title>
-
-   <para>
-     To ensure that WAL files are placed in a directory outside of the main data
-     directory (e.g. to keep them on a separate disk for performance reasons),
-     specify the location with  <option>--waldir</option>
-     (PostgreSQL 9.6 and earlier: <option>--xlogdir</option>) in
-     the <filename>repmgr.conf</filename> parameter <option>pg_basebackup_options</option>,
-     e.g.:
-     <programlisting>
-pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
-     This setting will also be honored by &repmgr; when cloning from Barman
-     (&repmgr; 5.2 and later).
-   </para>
-
-  </refsect1>
-
-<!-- don't rename this id as it may be used in external links -->
  <refsect1 id="repmgr-standby-create-recovery-conf">

-   <title>Using a standby cloned by another method</title>
-
-   <indexterm>
-     <primary>replication configuration</primary>
-     <secondary>generating for a standby cloned by another method</secondary>
-   </indexterm>
-
   <indexterm>
     <primary>recovery.conf</primary>
     <secondary>generating for a standby cloned by another method</secondary>
   </indexterm>

+   <title>Using a standby cloned by another method</title>
   <para>
     &repmgr; supports standbys cloned by another method (e.g. using <application>barman</application>'s
-     <command><ulink url="https://docs.pgbarman.org/#recover">barman recover</ulink></command> command).
+     <command><ulink url="http://docs.pgbarman.org/release/2.5/#recover">barman recover</ulink></command> command).
   </para>
   <para>
     To integrate the standby as a &repmgr; node, once the standby has been cloned,
     ensure the <filename>repmgr.conf</filename>
     file is created for the node, and that it has been registered using
     <command><link linkend="repmgr-standby-register">repmgr standby register</link></command>.
-   </para>
-   <tip>
-     <para>
-       To register a standby which is not running, execute
-       <link linkend="repmgr-standby-register">repmgr standby register --force</link>
-       and provide the connection details for the primary.
-     </para>
-     <para>
-       See <xref linkend="repmgr-standby-register-inactive-node"/> for more details.
-     </para>
-   </tip>
-   <para>
-     Then execute the command <command>repmgr standby clone --replication-conf-only</command>.
+     Then execute the command <command>repmgr standby clone --recovery-conf-only</command>.
     This will create the <filename>recovery.conf</filename> file needed to attach
-     the node to its upstream (in PostgreSQL 12 and later: append replication configuration
-     to <filename>postgresql.auto.conf</filename>), and will also create a replication slot on the
+     the node to its upstream, and will also create a replication slot on the
     upstream node if required.
   </para>
   <para>
-     The upstream node must be running so the correct replication configuration can be obtained.
-   </para>
-   <para>
-     If the standby is running, the replication configuration will not be written unless the
+     Note that the upstream node must be running. An existing
+     <filename>recovery.conf</filename> will not be overwritten unless the
     <option>-F/--force</option> option is provided.
   </para>
-   <tip>
-     <para>
-       Execute <command>repmgr standby clone --replication-conf-only --dry-run</command>
-       to check the prerequisites for creating the recovery configuration,
-       and display the configuration changes which would be made without actually
-	   making any changes.
-     </para>
-   </tip>
   <para>
-     In PostgreSQL 13 and later, the PostgreSQL configuration must be reloaded for replication
-     configuration changes to take effect.
-   </para>
-   <para>
-     In PostgreSQL 12 and earlier, the PostgreSQL instance must be restarted for replication
-     configuration changes to take effect.
+     Execute <command>repmgr standby clone --recovery-conf-only --dry-run</command>
+     to check the prerequisites for creating the <filename>recovery.conf</filename> file,
+     and display the contents of the file without actually creating it.
   </para>

+   <note>
+     <para>
+       <option>--recovery-conf-only</option> was introduced in &repmgr; <link linkend="release-4.0.4">4.0.4</link>.
+     </para>
+   </note>

  </refsect1>

@@ -308,9 +247,9 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
            Check prerequisites but don't actually clone the standby.
          </para>
          <para>
-            If <option>--replication-conf-only</option> specified, the contents of
-            the generated recovery configuration will be displayed
-            but not written.
+            If <option>--recovery-conf-only</option> specified, the contents of
+            the generated <filename>recovery.conf</filename> file will be displayed
+            but the file itself not written.
          </para>
        </listitem>
      </varlistentry>
@@ -332,12 +271,6 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
            node to the same path on the standby (default) or to the
            PostgreSQL data directory.
          </para>
-          <para>
-            Note that to be able to use this option, the &repmgr; user must be a superuser or
-            member of the <literal>pg_read_all_settings</literal> predefined role.
-            If this is not the case, provide a valid superuser with the
-            <option>-S</option>/<option>--superuser</option> option.
-          </para>
        </listitem>
      </varlistentry>

@@ -350,25 +283,6 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
        </listitem>
      </varlistentry>

-
-      <varlistentry>
-        <term><option>--recovery-min-apply-delay</option></term>
-        <listitem>
-          <para>
-            Set PostgreSQL configuration <option>recovery_min_apply_delay</option> parameter
-            to the provided value.
-          </para>
-          <para>
-            This overrides any <option>recovery_min_apply_delay</option> provided via
-            <filename>repmgr.conf</filename>.
-          </para>
-          <para>
-            For more details on this parameter, see:
-            <ulink url="https://www.postgresql.org/docs/current/runtime-config-replication.html#GUC-RECOVERY-MIN-APPLY-DELAY">recovery_min_apply_delay</ulink>.
-          </para>
-        </listitem>
-      </varlistentry>
-
      <varlistentry>
        <term><option>-R, --remote-user=USERNAME</option></term>
        <listitem>
@@ -379,19 +293,11 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
      </varlistentry>

      <varlistentry>
-        <term><option>--replication-conf-only</option></term>
+        <term><option> --recovery-conf-only</option></term>
        <listitem>
          <para>
-            Create recovery configuration for a previously cloned instance.
+            Create <filename>recovery.conf</filename> file for a previously cloned instance. &repmgr 4.0.4 and later.
          </para>
-		  <para>
-			In PostgreSQL 12 and later, the replication configuration will be
-			written to <filename>postgresql.auto.conf</filename>.
-		  </para>
-		  <para>
-			In PostgreSQL 11 and earlier, the replication configuration will be
-			written to <filename>recovery.conf</filename>.
-		  </para>
        </listitem>
      </varlistentry>

@@ -405,15 +311,11 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
      </varlistentry>

      <varlistentry>
-        <term><option>-S</option>/<option>--superuser</option></term>
+        <term><option>--superuser</option></term>
        <listitem>
          <para>
-            The name of a valid PostgreSQL superuser can  be provided with this option.
-          </para>
-          <para>
-            This is only required if the <option>--copy-external-config-files</option> was provided
-            and the &repmgr; user is not a superuser or member of the <literal>pg_read_all_settings</literal>
-            predefined role.
+            If the &repmgr; user is not a superuser, the name of a valid superuser must
+            be provided with this option.
          </para>
        </listitem>
      </varlistentry>
@@ -423,13 +325,9 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
        <term><option>--upstream-conninfo</option></term>
        <listitem>
          <para>
-            <literal>primary_conninfo</literal> value to include in the recovery configuration
+            <literal>primary_conninfo</literal> value to write in recovery.conf
            when the intended upstream server does not yet exist.
          </para>
-          <para>
-            Note that &repmgr; may modify the provided value, in particular to set the
-            correct <literal>application_name</literal>.
-          </para>
        </listitem>
      </varlistentry>

@@ -441,23 +339,6 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
          </para>
        </listitem>
      </varlistentry>
-
-      <varlistentry>
-        <term><option>--verify-backup</option></term>
-        <listitem>
-          <para>
-            <!-- update link after Pg13 release -->
-            Verify a cloned node using the
-            <ulink url="https://www.postgresql.org/docs/13/app-pgverifybackup.html">pg_verifybackup</ulink>
-            utility (PostgreSQL 13 and later).
-          </para>
-          <para>
-            This option can currently only be used when cloning directly from an upstream
-            node.
-          </para>
-        </listitem>
-      </varlistentry>
-
      <varlistentry>
        <term><option>--without-barman </option></term>
        <listitem>
@@ -480,7 +361,7 @@ pg_basebackup_options='--waldir=/path/to/wal-directory'</programlisting>
  <refsect1>
    <title>See also</title>
    <para>
-      See <xref linkend="cloning-standbys"/> for details about various aspects of cloning.
+      See <xref linkend="cloning-standbys"> for details about various aspects of cloning.
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-standby-follow.sgml
+++ b/doc/repmgr-standby-follow.sgml
@@ -20,62 +20,49 @@
      (&quot;follow target&quot;). Typically this will be the primary, but this
      command can also be used to attach the standby to another standby.
    </para>
-
    <para>
-      This command requires a valid <filename>repmgr.conf</filename> file for the standby,
-      either specified explicitly with <literal>-f/--config-file</literal> or located in a
+      This command requires a valid
+      <filename>repmgr.conf</filename> file for the standby, either specified
+      explicitly with <literal>-f/--config-file</literal> or located in a
      default location; no additional arguments are required.
    </para>

-    <para>The standby node (&quot;follow candidate&quot;) <emphasis>must</emphasis>
-      be running. If the new upstream (&quot;follow target&quot;) is not the primary,
-      the cluster primary <emphasis>must</emphasis> be running and accessible from the
-      standby node.
+	<para>
+	  By default &repmgr; will attempt to attach the standby to the current primary.
+	  If <option>--upstream-node-id</option> is provided, &repmgr; will attempt
+	  to attach the standby to the specified node, which can be another standby.
+	</para>
+
+    <para>
+      This command will force a restart of the standby server, which must be
+      running.
    </para>

-    <tip>
+	<tip>
      <para>
-        To re-add an inactive node to the replication cluster, use
-        <xref linkend="repmgr-node-rejoin"/>.
+		To re-add an inactive node to the replication cluster, use
+		<xref linkend="repmgr-node-rejoin">.
      </para>
-    </tip>
+	</tip>

-    <para>
-      By default &repmgr; will attempt to attach the standby to the current primary.
-      If <option>--upstream-node-id</option> is provided, &repmgr; will attempt
-      to attach the standby to the specified node, which can be another standby.
-    </para>
+	<para>
+	  <command>repmgr standby follow</command> will wait up to
+	  <varname>standby_follow_timeout</varname> seconds (default: <literal>30</literal>)
+	  to verify the standby has actually connected to the new upstream node.
+	</para>

-    <para>
-      In PostgreSQL 12 and earlier, this command will force a restart of PostgreSQL on the standby node.
-    </para>
-
-    <para>
-      In PostgreSQL 13 and later, by default this command will signal PostgreSQL to reload its
-      configuration, which will cause PostgreSQL to follow the new upstream without
-      a restart. If this behaviour is not desired for whatever reason, the configuration
-      file parameter <varname>standby_follow_restart</varname> can be set <literal>true</literal>
-      to always force a restart.
-    </para>
-
-    <para>
-      <command>repmgr standby follow</command> will wait up to
-      <varname>standby_follow_timeout</varname> seconds (default: <literal>30</literal>)
-      to verify the standby has actually connected to the new upstream node.
-    </para>
-
-    <note>
-      <para>
-        If <option>recovery_min_apply_delay</option> is set for the standby, it
-        will not attach to the new upstream node until it has replayed available
-        WAL.
-      </para>
-      <para>
-        Conversely, if the standby is attached to an upstream standby
-        which has <option>recovery_min_apply_delay</option> set, the upstream
-        standby's replay state may actually be behind that of its new downstream node.
-      </para>
-    </note>
+	<note>
+	  <para>
+	    If <option>recovery_min_apply_delay</option> is set for the standby, it
+	    will not attach to the new upstream node until it has replayed available
+	    WAL.
+	  </para>
+	  <para>
+	    Conversely, if the standby is attached to an upstream standby
+	    which has <option>recovery_min_apply_delay</option> set, the upstream
+            standby's replay state may actually be behind that of its new downstream node.
+	  </para>
+	</note>

  </refsect1>

@@ -135,9 +122,9 @@
            If not provided, &repmgr; will attempt to follow the current primary node.
          </para>
          <para>
-            Note that when using &repmgrd;, <option>--upstream-node-id</option>
+            Note that when using <application>repmgrd</application>, <option>--upstream-node-id</option>
            should always be configured;
-            see <link linkend="repmgrd-automatic-failover-configuration">Automatic failover configuration</link>
+			see <link linkend="repmgrd-automatic-failover-configuration">Automatic failover configuration</link>
            for details.
          </para>
        </listitem>
@@ -179,7 +166,7 @@
      be possible to follow the new upstream node, and &repmgr; will emit an error
      message like this:
      <programlisting>
-ERROR: this node cannot attach to follow target node &quot;node3&quot; (ID 3)
+ERROR: this node cannot attach to follow target node 3
 DETAIL: follow target server's timeline 2 forked off current database system timeline 1 before current recovery point 0/6108880</programlisting>
    </para>
    <para>
@@ -265,7 +252,7 @@ DETAIL: follow target server's timeline 2 forked off current database system tim
  <refsect1>
    <title>See also</title>
    <para>
-     <xref linkend="repmgr-node-rejoin"/>
+     <xref linkend="repmgr-node-rejoin">
    </para>
  </refsect1>
 </refentry>
--- a/doc/repmgr-standby-promote.sgml
+++ b/doc/repmgr-standby-promote.sgml
@@ -0,0 +1,199 @@
+<refentry id="repmgr-standby-promote">
+  <indexterm>
+    <primary>repmgr standby promote</primary>
+  </indexterm>
+
+  <refmeta>
+    <refentrytitle>repmgr standby promote</refentrytitle>
+  </refmeta>
+
+  <refnamediv>
+    <refname>repmgr standby promote</refname>
+    <refpurpose>promote a standby to a primary</refpurpose>
+  </refnamediv>
+
+  <refsect1>
+    <title>Description</title>
+    <para>
+      Promotes a standby to a primary if the current primary has failed. This
+      command requires a valid <filename>repmgr.conf</filename> file for the standby, either
+      specified explicitly  with <literal>-f/--config-file</literal> or located in a
+      default location; no additional arguments are required.
+    </para>
+    <para>
+      If the standby promotion succeeds, the server will not need to be
+      restarted. However any other standbys will need to follow the new server,
+      by using <xref linkend="repmgr-standby-follow">; if <application>repmgrd</application>
+        is active, it will handle this automatically.
+    </para>
+    <para>
+      Note that &repmgr; will wait for up to <varname>promote_check_timeout</varname> seconds
+      (default: 60 seconds) to verify that the standby has been promoted, and will
+      check the promotion every <varname>promote_check_interval</varname> seconds (default: 1 second).
+      Both values can be defined in <filename>repmgr.conf</filename>.
+    </para>
+
+    <note>
+      <para>
+        If WAL replay is paused on the standby, and not all WAL files on the standby have been
+        replayed, &repmgr; will not attempt to promote it.
+      </para>
+      <para>
+        This is because if WAL replay is paused, PostgreSQL itself will not react to a promote command
+        until WAL replay is resumed and all pending WAL has been replayed. This means
+        attempting to promote PostgreSQL in this state will leave PostgreSQL in a condition where the
+        promotion may occur at a unpredictable point in the future.
+      </para>
+      <para>
+        Note that if the standby is in archive recovery, &repmgr; will not be able to determine
+        if more WAL is pending replay, and will abort the promotion attempt if WAL replay is paused.
+      </para>
+    </note>
+
+  </refsect1>
+
+
+  <refsect1>
+    <title>Example</title>
+    <para>
+      <programlisting>
+      $ repmgr -f /etc/repmgr.conf standby promote
+      NOTICE: promoting standby to primary
+      DETAIL: promoting server "node2" (ID: 2) using "pg_ctl -l /var/log/postgres/startup.log -w -D '/var/lib/postgres/data' promote"
+      server promoting
+      DEBUG: setting node 2 as primary and marking existing primary as failed
+      NOTICE: STANDBY PROMOTE successful
+      DETAIL: server "node2" (ID: 2) was successfully promoted to primary</programlisting>
+    </para>
+  </refsect1>
+
+
+  <refsect1>
+    <title>Options</title>
+    <variablelist>
+      <varlistentry>
+        <term><option>--dry-run</option></term>
+        <listitem>
+          <para>
+            Check if this node can be promoted, but don't carry out the promotion
+          </para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Configuration file settings</title>
+   <para>
+     The following parameters in <filename>repmgr.conf</filename> are relevant to the
+     promote operation:
+    </para>
+
+    <para>
+      <itemizedlist spacing="compact" mark="bullet">
+
+       <listitem>
+        <indexterm>
+          <primary>promote_check_interval</primary>
+          <secondary>with &quot;repmgr standby promote &quot;</secondary>
+        </indexterm>
+         <simpara>
+           <literal>promote_check_interval</literal>:
+           interval (in seconds, default: 1 second) to wait between each check
+           to determine whether the standby has been promoted.
+		 </simpara>
+	   </listitem>
+
+       <listitem>
+        <indexterm>
+          <primary>promote_check_timeout</primary>
+          <secondary>with &quot;repmgr standby promote &quot;</secondary>
+        </indexterm>
+         <simpara>
+           <literal>promote_check_timeout</literal>:
+           time (in seconds, default: 60 seconds) to wait to verify that the standby has been promoted
+           before exiting with <literal>ERR_PROMOTION_FAIL</literal>.
+		 </simpara>
+	   </listitem>
+
+	  </itemizedlist>
+	</para>
+
+  </refsect1>
+
+  <refsect1>
+    <title>Exit codes</title>
+    <para>
+      Following exit codes can be emitted by <command>repmgr standby promote</command>:
+    </para>
+    <variablelist>
+      <varlistentry>
+        <term><option>SUCCESS (0)</option></term>
+        <listitem>
+          <para>
+            The standby was successfully promoted to primary.
+          </para>
+        </listitem>
+      </varlistentry>
+
+     <varlistentry>
+        <term><option>ERR_DB_CONN (6)</option></term>
+        <listitem>
+          <para>
+            &repmgr; was unable to connect to the local PostgreSQL node.
+          </para>
+          <para>
+            PostgreSQL must be running before the node can be promoted.
+          </para>
+        </listitem>
+      </varlistentry>
+
+     <varlistentry>
+       <term><option>ERR_PROMOTION_FAIL (8)</option></term>
+        <listitem>
+          <para>
+            The node could not be promoted to primary for one of the following
+            reasons:
+            <itemizedlist spacing="compact" mark="bullet">
+
+              <listitem>
+                <simpara>
+                  there is an existing primary node in the replication cluster
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  the node is not a standby
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  WAL replay is paused on the node
+                </simpara>
+              </listitem>
+
+              <listitem>
+                <simpara>
+                  execution of the PostgreSQL promote command failed
+                </simpara>
+              </listitem>
+
+            </itemizedlist>
+          </para>
+        </listitem>
+     </varlistentry>
+
+    </variablelist>
+  </refsect1>
+
+
+  <refsect1 id="repmgr-standby-promote-events">
+    <title>Event notifications</title>
+    <para>
+      A <literal>standby_promote</literal> <link linkend="event-notifications">event notification</link> will be generated.
+    </para>
+  </refsect1>
+
+</refentry>
--- a/doc/repmgr-standby-promote.xml
+++ b/doc/repmgr-standby-promote.xml
@@ -1,345 +0,0 @@
-<refentry id="repmgr-standby-promote">
-  <indexterm>
-    <primary>repmgr standby promote</primary>
-  </indexterm>
-
-  <refmeta>
-    <refentrytitle>repmgr standby promote</refentrytitle>
-  </refmeta>
-
-  <refnamediv>
-    <refname>repmgr standby promote</refname>
-    <refpurpose>promote a standby to a primary</refpurpose>
-  </refnamediv>
-
-  <refsect1>
-    <title>Description</title>
-    <para>
-      Promotes a standby to a primary if the current primary has failed. This
-      command requires a valid <filename>repmgr.conf</filename> file for the standby, either
-      specified explicitly with <literal>-f/--config-file</literal> or located in a
-      default location; no additional arguments are required.
-    </para>
-    <important>
-      <para>
-        If &repmgrd; is active, you must execute
-        <command><link linkend="repmgr-service-pause">repmgr service pause</link></command>
-        (&repmgr; 4.2 - 4.4: <command><link linkend="repmgr-service-pause">repmgr service pause</link></command>)
-        to temporarily disable &repmgrd; while making any changes
-        to the replication cluster.
-      </para>
-    </important>
-
-    <para>
-      If the standby promotion succeeds, the server will not need to be
-      restarted. However any other standbys will need to follow the new primary,
-      and will need to be restarted to do this.
-    </para>
-    <para>
-      Beginning with <link linkend="release-4.4">repmgr 4.4</link>,
-      the option <option>--siblings-follow</option> can be used to have
-      all other standbys (and a witness server, if in use)
-	  follow the new primary.
-    </para>
-
-    <note>
-      <para>
-        If using &repmgrd;, when invoking
-        <command>repmgr standby promote</command> (either directly via
-        the <option>promote_command</option>, or in a script called
-        via <option>promote_command</option>), <option>--siblings-follow</option>
-        <emphasis>must not</emphasis> be included as a
-        command line option for <command>repmgr standby promote</command>.
-      </para>
-    </note>
-
-    <para>
-      In <link linkend="release-4.3">repmgr 4.3</link> and earlier,
-      <command><link linkend="repmgr-standby-follow">repmgr standby follow</link></command>
-      must be executed on each standby individually.
-    </para>
-
-    <para>
-      &repmgr; will wait for up to <varname>promote_check_timeout</varname> seconds
-      (default: <literal>60</literal>) to verify that the standby has been promoted, and will
-      check the promotion every <varname>promote_check_interval</varname> seconds (default: 1 second).
-      Both values can be defined in <filename>repmgr.conf</filename>.
-    </para>
-
-    <warning>
-      <para>
-        In PostgreSQL 12 and earlier, if WAL replay is paused on the standby, and not all
-        WAL files on the standby have been replayed, &repmgr; will not attempt to promote it.
-      </para>
-      <para>
-        This is because if WAL replay is paused, PostgreSQL itself will not react to a promote command
-        until WAL replay is resumed and all pending WAL has been replayed. This means
-        attempting to promote PostgreSQL in this state will leave PostgreSQL in a condition where the
-        promotion may occur at a unpredictable point in the future.
-      </para>
-      <para>
-        Note that if the standby is in archive recovery, &repmgr; will not be able to determine
-        if more WAL is pending replay, and will abort the promotion attempt if WAL replay is paused.
-      </para>
-      <para>
-        This restriction does <emphasis>not</emphasis> apply to PostgreSQL 13 and later.
-      </para>
-    </warning>
-
-  </refsect1>
-
-
-
-  <refsect1>
-    <title>Example</title>
-    <para>
-      <programlisting>
-      $ repmgr -f /etc/repmgr.conf standby promote
-      NOTICE: promoting standby to primary
-      DETAIL: promoting server "node2" (ID: 2) using "pg_ctl -l /var/log/postgres/startup.log -w -D '/var/lib/postgres/data' promote"
-      server promoting
-      NOTICE: STANDBY PROMOTE successful
-      DETAIL: server "node2" (ID: 2) was successfully promoted to primary</programlisting>
-    </para>
-  </refsect1>
-
-
-  <refsect1>
-    <title>User permission requirements</title>
-    <para><emphasis>pg_promote() (PostgreSQL 12 and later)</emphasis></para>
-    <para>
-      From PostgreSQL 12, &repmgr; will attempt to use the built-in <function>pg_promote()</function>
-      function to promote a standby to primary.
-    </para>
-    <para>
-      By default, execution of <function>pg_promote()</function> is restricted to superusers.
-      If the <literal>repmgr</literal> user does not have permission to execute
-      <function>pg_promote()</function>, &repmgr; will fall back to using &quot;<command>pg_ctl promote</command>&quot;.
-    </para>
-    <tip>
-      <para>
-        Execute <command>repmgr standby promote</command> with the <option>--dry-run</option>
-        to check whether the &repmgr; user has permission to execute <function>pg_promote()</function>.
-      </para>
-      <para>
-        If the <literal>repmgr</literal> user is not a superuser, execution permission for this
-        function can be granted with e.g.:
-        <programlisting>
-    GRANT EXECUTE ON FUNCTION pg_catalog.pg_promote TO repmgr</programlisting>
-      </para>
-      <para>
-        Note that permissions are only effective for the database they are granted in, so
-        this <emphasis>must</emphasis> be executed in the &repmgr; database to be effective.
-      </para>
-    </tip>
-    <para>
-      For more details on <function>pg_promote()</function>, see the
-      <ulink url="https://www.postgresql.org/docs/current/functions-admin.html#FUNCTIONS-RECOVERY-CONTROL-TABLE">PostgreSQL documentation</ulink>.
-    </para>
-  </refsect1>
-
-  <refsect1>
-    <title>Options</title>
-    <variablelist>
-      <varlistentry>
-
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check if this node can be promoted, but don't carry out the promotion.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>--siblings-follow</option></term>
-        <listitem>
-          <para>
-            Have all sibling nodes (nodes formerly attached to the same upstream
-            node as the promotion candidate) follow this node after it has been promoted.
-          </para>
-		  <para>
-			Note that a witness server, if in use, is also
-			counted as a &quot;sibling node&quot; as it needs to be instructed to
-			synchronise its metadata with the new primary.
-		  </para>
-          <important>
-            <para>
-              Do <emphasis>not</emphasis> provide this option when configuring
-              &repmgrd;'s <option>promote_command</option>.
-            </para>
-          </important>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>-F</option></term>
-        <term><option>--force</option></term>
-        <listitem>
-          <para>
-            Ignore warnings and continue anyway.
-          </para>
-          <para>
-            This option is relevant in the following situations if <option>--siblings-follow</option> was specified:
-            <itemizedlist spacing="compact" mark="bullet">
-              <listitem>
-                <simpara>
-                  If one or more sibling nodes was not reachable via SSH, the standby will be promoted anyway.
-                </simpara>
-              </listitem>
-              <listitem>
-                <simpara>
-                  If the promotion candidate has insufficient free walsenders to accommodate the standbys which will
-                  be attached to it, the standby will be promoted anyway.
-                </simpara>
-              </listitem>
-              <listitem>
-                <simpara>
-                  If replication slots are in use but the promotion candidate has insufficient free replication slots
-                  to accommodate the standbys which will be attached to it, the standby will be promoted anyway.
-                </simpara>
-              </listitem>
-            </itemizedlist>
-          </para>
-          <para>
-            Note that if the <option>-F</option>/<option>--force</option> option is used when any of the above
-            situations is encountered, the onus is on the user to manually resolve any resulting issues.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Configuration file settings</title>
-   <para>
-     The following parameters in <filename>repmgr.conf</filename> are relevant to the
-     promote operation:
-    </para>
-
-    <para>
-      <itemizedlist spacing="compact" mark="bullet">
-
-       <listitem>
-        <indexterm>
-          <primary>promote_check_interval</primary>
-          <secondary>with &quot;repmgr standby promote &quot;</secondary>
-        </indexterm>
-         <simpara>
-           <literal>promote_check_interval</literal>:
-           interval (in seconds, default: 1 second) to wait between each check
-           to determine whether the standby has been promoted.
-		 </simpara>
-	   </listitem>
-
-       <listitem>
-        <indexterm>
-          <primary>promote_check_timeout</primary>
-          <secondary>with &quot;repmgr standby promote &quot;</secondary>
-        </indexterm>
-         <simpara>
-           <literal>promote_check_timeout</literal>:
-           time (in seconds, default: 60 seconds) to wait to verify that the standby has been promoted
-           before exiting with <literal>ERR_PROMOTION_FAIL</literal>.
-		 </simpara>
-	   </listitem>
-
-       <listitem>
-        <indexterm>
-          <primary>service_promote_command</primary>
-          <secondary>with &quot;repmgr standby promote &quot;</secondary>
-        </indexterm>
-         <simpara>
-           <literal>service_promote_command</literal>:
-           a command which will be executed instead of <command>pg_ctl promote</command>
-           or (in PostgreSQL 12 and later) <function>pg_promote()</function>.
-         </simpara>
-         <simpara>
-           This is intended for systems which provide a package-level promote command,
-           such as Debian's <application>pg_ctlcluster</application>, to promote the
-           PostgreSQL from standby to primary.
-         </simpara>
-       </listitem>
-
-	  </itemizedlist>
-	</para>
-
-  </refsect1>
-
-  <refsect1>
-    <title>Exit codes</title>
-    <para>
-      Following exit codes can be emitted by <command>repmgr standby promote</command>:
-    </para>
-    <variablelist>
-      <varlistentry>
-        <term><option>SUCCESS (0)</option></term>
-        <listitem>
-          <para>
-            The standby was successfully promoted to primary.
-          </para>
-        </listitem>
-      </varlistentry>
-
-     <varlistentry>
-        <term><option>ERR_DB_CONN (6)</option></term>
-        <listitem>
-          <para>
-            &repmgr; was unable to connect to the local PostgreSQL node.
-          </para>
-          <para>
-            PostgreSQL must be running before the node can be promoted.
-          </para>
-        </listitem>
-      </varlistentry>
-
-     <varlistentry>
-       <term><option>ERR_PROMOTION_FAIL (8)</option></term>
-        <listitem>
-          <para>
-            The node could not be promoted to primary for one of the following
-            reasons:
-            <itemizedlist spacing="compact" mark="bullet">
-
-              <listitem>
-                <simpara>
-                  there is an existing primary node in the replication cluster
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  the node is not a standby
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  WAL replay is paused on the node
-                </simpara>
-              </listitem>
-
-              <listitem>
-                <simpara>
-                  execution of the PostgreSQL promote command failed
-                </simpara>
-              </listitem>
-
-            </itemizedlist>
-          </para>
-        </listitem>
-     </varlistentry>
-
-    </variablelist>
-  </refsect1>
-
-
-  <refsect1 id="repmgr-standby-promote-events">
-    <title>Event notifications</title>
-    <para>
-      A <literal>standby_promote</literal> <link linkend="event-notifications">event notification</link> will be generated.
-    </para>
-  </refsect1>
-
-</refentry>
--- a/doc/repmgr-standby-register.sgml
+++ b/doc/repmgr-standby-register.sgml
@@ -17,7 +17,7 @@
    <para>
      <command>repmgr standby register</command> adds a standby's information to
      the &repmgr; metadata. This command needs to be executed to enable
-      promote/follow operations and to allow &repmgrd; to work with the node.
+      promote/follow operations and to allow <application>repmgrd</application> to work with the node.
      An existing standby can be registered using this command. Execute with the
      <literal>--dry-run</literal> option to check what would happen without actually registering the
      standby.
@@ -28,7 +28,7 @@
        If providing the configuration file location with <literal>-f/--config-file</literal>,
        avoid using a relative path, as &repmgr; stores the configuration file location
        in the repmgr metadata for use when &repmgr; is executed remotely (e.g. during
-        <xref linkend="repmgr-standby-switchover"/>). &repmgr; will attempt to convert the
+        <xref linkend="repmgr-standby-switchover">). &repmgr; will attempt to convert the
          a relative path into an absolute one, but this may not be the same as the path you
          would explicitly provide (e.g. <filename>./repmgr.conf</filename> might be converted
          to <filename>/path/to/./repmgr.conf</filename>, whereas you'd normally write
@@ -59,7 +59,7 @@
   <para>
     Depending on your environment and workload, it may take some time for the standby's node record
     to propagate from the primary to the standby. Some actions (such as starting
-     &repmgrd;) require that the standby's node record
+     <application>repmgrd</application>) require that the standby's node record
     is present and up-to-date to function correctly.
   </para>
   <para>
@@ -75,22 +75,10 @@
   <para>
    Under some circumstances you may wish to register a standby which is not
    yet running; this can be the case when using provisioning tools to create
-    a complex replication cluster, or if the node was not cloned by &repmgr;.
-   </para>
-   <para>
-    In this case, by using the <option>-F/--force</option>
+    a complex replication cluster. In this case, by using the <option>-F/--force</option>
    option and providing the connection parameters to the primary server,
-    the standby can be registered even if it has not yet been started.
+    the standby can be registered.
   </para>
-   <tip>
-     <para>
-       Connection parameters can either be provided either as a <literal>conninfo</literal> string
-       (e.g. <option>-d 'host=node1 user=repmgr'</option> or as individual connection parameters
-        (<option>-h/--host</option>, <option>-d/--dbname</option>,
-       <option>-U/--user</option>, <option>-p/--port</option> etc.).
-     </para>
-   </tip>
-
   <para>
    Similarly, with cascading replication it may be necessary to register
    a standby whose upstream node has not yet been registered - in this case,
@@ -108,11 +96,9 @@
    <title>Registering a node not cloned by repmgr</title>
    <para>
      If you've cloned a standby using another method (e.g. <application>barman</application>'s
-     <command><ulink url="https://docs.pgbarman.org/#recover">barman recover</ulink></command>
-     command), register the node as detailed in section
-     <xref linkend="repmgr-standby-register-inactive-node"/> then execute
-     <link linkend="repmgr-standby-create-recovery-conf">repmgr standby clone --replication-conf-only</link>
-     to generate the appropriate replication configuration.
+     <command>barman recover</command> command), first execute
+     <link linkend="repmgr-standby-create-recovery-conf">repmgr standby clone --recovery-conf-only</link>
+     to add the <filename>recovery.conf</filename> file, then register the standby as usual.
    </para>
  </refsect1>

@@ -133,7 +119,7 @@


      <varlistentry>
-       <term><option>-F</option>/<option>--force</option></term>
+       <term><option>-F</option><option>--force</option></term>
        <listitem>
          <para>
            Overwrite an existing node record
--- a/doc/repmgr-standby-switchover.sgml
+++ b/doc/repmgr-standby-switchover.sgml
@@ -22,13 +22,11 @@
      passwordless SSH connection to the current primary.
    </para>
    <para>
-      If other nodes are connected to the demotion candidate, &repmgr; can instruct
+      If other standbys are connected to the demotion candidate, &repmgr; can instruct
      these to follow the new primary if the option <literal>--siblings-follow</literal>
      is specified. This requires a passwordless SSH connection between the promotion
-      candidate (new primary) and the nodes attached to the demotion candidate
-      (existing primary). Note that a witness server, if in use, is also
-	  counted as a &quot;sibling node&quot; as it needs to be instructed to
-	  synchronise its metadata with the new primary.
+      candidate (new primary) and the standbys attached to the demotion candidate
+      (existing primary).
    </para>
    <note>
      <para>
@@ -44,18 +42,18 @@
    </note>
    <para>
      For more details on performing a switchover, including preparation and configuration,
-      see section <xref linkend="performing-switchover"/>.
+      see section <xref linkend="performing-switchover">.
    </para>

    <note>
      <para>
        From <link linkend="release-4.2">repmgr 4.2</link>, &repmgr; will instruct any running
-        &repmgrd; instances to pause operations while the switchover
-        is being carried out, to prevent &repmgrd; from
-        unintentionally promoting a node. For more details, see <xref linkend="repmgrd-pausing"/>.
+        <application>repmgrd</application> instances to pause operations while the switchover
+        is being carried out, to prevent <application>repmgrd</application> from
+        unintentionally promoting a node. For more details, see <xref linkend="repmgrd-pausing">.
      </para>
      <para>
-        Users of &repmgr; versions prior to 4.2 should ensure that &repmgrd;
+        Users of &repmgr; versions prior to 4.2 should ensure that <application>repmgrd</application>
        is not running on any nodes while a switchover is being executed.
      </para>
    </note>
@@ -63,45 +61,6 @@
  </refsect1>

  <refsect1>
-    <title>User permission requirements</title>
-    <para><emphasis>data_directory</emphasis></para>
-    <para>
-      &repmgr; needs to be able to determine the location of the data directory on the
-      demotion candidate. If the &repmgr; is not a superuser or member of the <varname>pg_read_all_settings</varname>
-      <ulink url="https://www.postgresql.org/docs/current/predefined-roles.html">predefined roles</ulink>,
-      the name of a superuser should be provided with the <option>-S</option>/<option>--superuser</option> option.
-    </para>
-    <para><emphasis>CHECKPOINT</emphasis></para>
-    <para>
-      &repmgr; executes <command>CHECKPOINT</command> on the demotion candidate as part of the shutdown
-      process to ensure it shuts down as smoothly as possible.
-    </para>
-    <para>
-      Note that <command>CHECKPOINT</command> requires database superuser permissions to execute.
-      If the <literal>repmgr</literal> user is not a superuser, the name of a superuser should be
-      provided with the <option>-S</option>/<option>--superuser</option> option.
-    </para>
-    <para>
-      If &repmgr; is unable to execute the <command>CHECKPOINT</command> command, the switchover
-      can still be carried out, albeit at a greater risk that the demotion candidate may not
-      be able to shut down as smoothly as might otherwise have been the case.
-    </para>
-    <para><emphasis>pg_promote() (PostgreSQL 12 and later)</emphasis></para>
-    <para>
-      From PostgreSQL 12, &repmgr; defaults to using the built-in <command>pg_promote()</command> function to
-      promote a standby to primary.
-    </para>
-    <para>
-      Note that execution of <function>pg_promote()</function> is restricted to superusers or to
-      any user who has been granted execution permission for this function. If the &repmgr; user
-      is not permitted to execute <function>pg_promote()</function>, &repmgr; will fall back to using
-      &quot;<command>pg_ctl promote</command>&quot;. For more details see
-      <link linkend="repmgr-standby-promote">repmgr standby promote</link>.
-    </para>
-  </refsect1>
-
-  <refsect1>
-
    <title>Options</title>
    <variablelist>

@@ -154,12 +113,9 @@
          <para>
            Use <application>pg_rewind</application> to reintegrate the old primary if necessary
            (and the prerequisites for using <application>pg_rewind</application> are met).
-          </para>
-          <para>
-            If using PostgreSQL 9.4, and the <application>pg_rewind</application>
+            If using PostgreSQL 9.3 or 9.4, and the <application>pg_rewind</application>
            binary is not installed in the PostgreSQL <filename>bin</filename> directory,
-            provide its full path. For more details see also <xref linkend="switchover-pg-rewind"/>
-            and <xref linkend="repmgr-node-rejoin-pg-rewind"/>.
+            provide its full path. For more details see also <xref linkend="switchover-pg-rewind">.
          </para>
        </listitem>
      </varlistentry>
@@ -178,30 +134,12 @@
        <term><option>--repmgrd-no-pause</option></term>
        <listitem>
          <para>
-            Don't pause &repmgrd; while executing a switchover.
+            Don't pause <application>repmgrd</application> while executing a switchover.
          </para>
          <para>
            This option should not be used unless you take steps by other means
-            to ensure &repmgrd; is paused or not
+            to ensure <application>repmgrd</application> is paused or not
            running on all nodes.
-          </para>
-		  <para>
-            This option cannot be used together with <option>--repmgrd-force-unpause</option>.
-          </para>
-
-        </listitem>
-      </varlistentry>
-
-	  <varlistentry>
-        <term><option>--repmgrd-force-unpause</option></term>
-        <listitem>
-          <para>
-            Always unpause all &repmgrd; instances after executing a switchover. This will ensure that
-			any &repmgrd; instances which were paused before the switchover will be
-			unpaused.
-          </para>
-          <para>
-            This option cannot be used together with <option>--repmgrd-no-pause</option>.
          </para>
        </listitem>
      </varlistentry>
@@ -212,31 +150,10 @@
        <term><option>--siblings-follow</option></term>
        <listitem>
          <para>
-            Have nodes attached to the old primary follow the new primary.
+            Have standbys attached to the old primary follow the new primary.
          </para>
-          <para>
-            This will also ensure that a witness node, if in use, is updated
-            with the new primary's data.
-          </para>
-          <note>
-            <para>
-              In a future &repmgr; release, <option>--siblings-follow</option> will be applied
-              by default.
-            </para>
-          </note>
        </listitem>
      </varlistentry>
-
-     <varlistentry>
-        <term><option>-S</option>/<option>--superuser</option></term>
-        <listitem>
-          <para>
-            Use the named superuser instead of the normal &repmgr; user to perform
-            actions requiring superuser permissions.
-          </para>
-        </listitem>
-     </varlistentry>
-
    </variablelist>

  </refsect1>
@@ -252,14 +169,13 @@
    <variablelist>

      <varlistentry>
+        <indexterm>
+          <primary>replication_lag_critical</primary>
+          <secondary>with &quot;repmgr standby switchover&quot;</secondary>
+        </indexterm>
+
        <term><option>replication_lag_critical</option></term>
        <listitem>
-
-          <indexterm>
-            <primary>replication_lag_critical</primary>
-            <secondary>with &quot;repmgr standby switchover&quot;</secondary>
-          </indexterm>
-
          <para>
            If replication lag (in seconds) on the standby exceeds this value, the
            switchover will be aborted (unless the <literal>-F/--force</literal> option
@@ -269,14 +185,13 @@
      </varlistentry>

      <varlistentry>
+        <indexterm>
+          <primary>shutdown_check_timeout</primary>
+          <secondary>with &quot;repmgr standby switchover&quot;</secondary>
+        </indexterm>

        <term><option>shutdown_check_timeout</option></term>
        <listitem>
-          <indexterm>
-            <primary>shutdown_check_timeout</primary>
-            <secondary>with &quot;repmgr standby switchover&quot;</secondary>
-          </indexterm>
-
          <para>
            The maximum number of seconds to wait for the
            demotion candidate (current primary) to shut down, before aborting the switchover.
@@ -298,13 +213,13 @@


      <varlistentry>
+        <indexterm>
+          <primary>wal_receive_check_timeout</primary>
+          <secondary>with &quot;repmgr standby switchover&quot;</secondary>
+        </indexterm>
+
        <term><option>wal_receive_check_timeout</option></term>
        <listitem>
-          <indexterm>
-            <primary>wal_receive_check_timeout</primary>
-          <secondary>with &quot;repmgr standby switchover&quot;</secondary>
-          </indexterm>
-
          <para>
            After the primary has shut down, the maximum number of seconds to wait for the
            walreceiver on the standby to flush WAL to disk before comparing WAL receive location
@@ -315,14 +230,13 @@


      <varlistentry>
+        <indexterm>
+          <primary>standby_reconnect_timeout</primary>
+          <secondary>with &quot;repmgr standby switchover&quot;</secondary>
+        </indexterm>

        <term><option>standby_reconnect_timeout</option></term>
        <listitem>
-          <indexterm>
-            <primary>standby_reconnect_timeout</primary>
-            <secondary>with &quot;repmgr standby switchover&quot;</secondary>
-          </indexterm>
-
          <para>
            The maximum number of seconds to attempt to wait for the demotion candidate (former primary)
            to reconnect to the promoted primary (default: 60 seconds)
@@ -335,16 +249,14 @@
        </listitem>
      </varlistentry>

-      <varlistentry>
+     <varlistentry>
+        <indexterm>
+          <primary>node_rejoin_timeout</primary>
+          <secondary>with &quot;repmgr standby switchover&quot;</secondary>
+        </indexterm>

        <term><option>node_rejoin_timeout</option></term>
        <listitem>
-
-          <indexterm>
-            <primary>node_rejoin_timeout</primary>
-            <secondary>with &quot;repmgr standby switchover&quot;</secondary>
-          </indexterm>
-
          <para>
            maximum number of seconds to attempt to wait for the demotion candidate (former primary)
            to reconnect to the promoted primary (default: 60 seconds)
@@ -438,10 +350,10 @@
  <refsect1>
    <title>See also</title>
    <para>
-      <xref linkend="repmgr-standby-follow"/>, <xref linkend="repmgr-node-rejoin"/>
+      <xref linkend="repmgr-standby-follow">, <xref linkend="repmgr-node-rejoin">
    </para>
    <para>
-      For more details on performing a switchover operation, see the section <xref linkend="performing-switchover"/>.
+      For more details on performing a switchover operation, see the section <xref linkend="performing-switchover">.
    </para>
  </refsect1>

--- a/doc/repmgr-standby-unregister.sgml
+++ b/doc/repmgr-standby-unregister.sgml
--- a/doc/repmgr-witness-register.sgml
+++ b/doc/repmgr-witness-register.sgml
@@ -20,7 +20,7 @@
      record to the &repmgr; metadata, and if necessary initialises the witness
      node by installing the &repmgr; extension and copying the &repmgr; metadata
      to the witness server. This command needs to be executed to enable
-      use of the witness server with &repmgrd;.
+      use of the witness server with <application>repmgrd</application>.
    </para>
    <para>
      When executing <command>repmgr witness register</command>, database connection
@@ -63,34 +63,6 @@
  </refsect1>


-
-  <refsect1>
-
-    <title>Options</title>
-   <variablelist>
-
-      <varlistentry>
-        <term><option>--dry-run</option></term>
-        <listitem>
-          <para>
-            Check prerequisites but don't actually register the witness
-          </para>
-        </listitem>
-      </varlistentry>
-
-
-      <varlistentry>
-       <term><option>-F</option>/<option>--force</option></term>
-        <listitem>
-          <para>
-            Overwrite an existing node record
-          </para>
-        </listitem>
-      </varlistentry>
-
-   </variablelist>
-  </refsect1>
-
  <refsect1 id="repmgr-witness-register-events">
    <title>Event notifications</title>
    <para>
--- a/doc/repmgr-witness-unregister.sgml
+++ b/doc/repmgr-witness-unregister.sgml
--- a/doc/repmgr.sgml
+++ b/doc/repmgr.sgml
@@ -1,16 +1,14 @@
-<!-- doc/repmgr.xml -->
+<!-- doc/src/sgml/postgres.sgml -->

-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-          "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
-[
-          <!ENTITY % version SYSTEM "version.xml">
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.2//EN" [
+
+          <!ENTITY % version SYSTEM "version.sgml">
          %version;

-          <!ENTITY % filelist SYSTEM "filelist.xml">
+          <!ENTITY % filelist SYSTEM "filelist.sgml">
          %filelist;

          <!ENTITY repmgr "<productname>repmgr</productname>">
-          <!ENTITY repmgrd "<productname>repmgrd</productname>">
          <!ENTITY postgres "<productname>PostgreSQL</productname>">
 ]>

@@ -18,7 +16,7 @@
 <title>repmgr &repmgrversion; Documentation</title>

 <bookinfo>
-  <corpauthor>EDB</corpauthor>
+  <corpauthor>2ndQuadrant Ltd</corpauthor>
  <productname>repmgr</productname>
  <productnumber>&repmgrversion;</productnumber>
  &legal;
@@ -26,31 +24,26 @@
  <abstract>
   <para>
   This is the official documentation of &repmgr; &repmgrversion; for
-   use with PostgreSQL 9.4 - PostgreSQL 15.
-   </para>
-   <para>
-     &repmgr; is being continually developed and we strongly recommend using the
-     latest version. Please check the
-     <ulink url="https://repmgr.org/">repmgr website</ulink> for details
-     about the current &repmgr; version as well as the
-     <ulink url="https://repmgr.org/docs/current/index.html">current repmgr documentation</ulink>.
+   use with PostgreSQL 9.3 - PostgreSQL 11.
+   It describes the functionality supported by the current version of &repmgr;.
   </para>

   <para>
    &repmgr; is developed by
-    <ulink url="https://www.enterprisedb.com/">EDB</ulink>
-    along with contributions from other individuals and organisations.
+    <ulink url="https://2ndquadrant.com">2ndQuadrant</ulink>
+    along with contributions from other individuals and companies.
    Contributions from the community are appreciated and welcome - get
-    in touch via <ulink url="https://github.com/EnterpriseDB/repmgr">github</ulink>
+    in touch via <ulink url="https://github.com/2ndQuadrant/repmgr">github</ulink>
    or <ulink url="https://groups.google.com/group/repmgr">the mailing list/forum</ulink>.
-    Multiple EDB customers contribute funding to make &repmgr; development possible.
+    Multiple 2ndQuadrant customers contribute funding
+    to make repmgr development possible.
   </para>

   <para>
-     &repmgr; is fully supported by EDB's
-     <ulink url="https://www.enterprisedb.com/support/postgresql-support-overview-get-the-most-out-of-postgresql">24/7 Production Support</ulink>.
-     EDB, a Major Sponsor of the PostgreSQL project, continues to maintain &repmgr;.
-     We welcome participation from other organisations and individual developers.
+     &repmgr; is fully supported by 2ndQuadrant's
+     <ulink url="https://www.2ndquadrant.com/en/support/support-postgresql/">24/7 Production Support</ulink>.
+     2ndQuadrant, a Major Sponsor of the PostgreSQL project, continues to develop and maintain &repmgr;.
+     Other companies as well as individual developers are welcome to participate in the efforts.
   </para>
  </abstract>

@@ -80,6 +73,7 @@
  &promoting-standby;
  &follow-new-primary;
  &switchover;
+  &configuring-witness-server;
  &event-notifications;
  &upgrading-repmgr;
 </part>
@@ -90,6 +84,7 @@
  &repmgrd-automatic-failover;
  &repmgrd-configuration;
  &repmgrd-operation;
+  &repmgrd-bdr;
 </part>

 <part id="repmgr-command-reference">
@@ -114,11 +109,11 @@
  &repmgr-cluster-crosscheck;
  &repmgr-cluster-event;
  &repmgr-cluster-cleanup;
-  &repmgr-service-status;
-  &repmgr-service-pause;
-  &repmgr-service-unpause;
+  &repmgr-daemon-status;
  &repmgr-daemon-start;
  &repmgr-daemon-stop;
+  &repmgr-daemon-pause;
+  &repmgr-daemon-unpause;
 </part>

 &appendix-release-notes;
@@ -127,6 +122,7 @@
 &appendix-packages;
 &appendix-support;

- <index id="bookindex"></index>
+ <![%include-index;[&bookindex;]]>
+ <![%include-xslt-index;[<index id="bookindex"></index>]]>

 </book>
--- a/doc/repmgrd-automatic-failover.sgml
+++ b/doc/repmgrd-automatic-failover.sgml
@@ -0,0 +1,246 @@
+<chapter id="repmgrd-automatic-failover" xreflabel="Automatic failover with repmgrd">
+ <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>automatic failover</secondary>
+ </indexterm>
+
+ <title>Automatic failover with repmgrd</title>
+
+ <para>
+  <application>repmgrd</application> is a management and monitoring daemon which runs
+  on each node in a replication cluster. It can automate actions such as
+  failover and updating standbys to follow the new primary, as well as
+  providing monitoring information about the state of each standby.
+ </para>
+
+<sect1 id="repmgrd-witness-server" xreflabel="Using a witness server with repmgrd">
+ <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>witness server</secondary>
+ </indexterm>
+
+ <indexterm>
+   <primary>witness server</primary>
+   <secondary>repmgrd</secondary>
+ </indexterm>
+
+ <title>Using a witness server with repmgrd</title>
+ <para>
+   In a situation caused e.g. by a network interruption between two
+   data centres, it's important to avoid a &quot;split-brain&quot; situation where
+   both sides of the network assume they are the active segment and the
+   side without an active primary unilaterally promotes one of its standbys.
+ </para>
+ <para>
+   To prevent this situation happening, it's essential to ensure that one
+   network segment has a &quot;voting majority&quot;, so other segments will know
+   they're in the minority and not attempt to promote a new primary. Where
+   an odd number of servers exists, this is not an issue. However, if each
+   network has an even number of nodes, it's necessary to provide some way
+   of ensuring a majority, which is where the witness server becomes useful.
+ </para>
+ <para>
+   This is not a fully-fledged standby node and is not integrated into
+   replication, but it effectively represents the &quot;casting vote&quot; when
+   deciding which network segment has a majority. A witness server can
+   be set up using <link linkend="repmgr-witness-register"><command>repmgr witness register</command></link>;
+   see also section <link linkend="using-witness-server">Using a witness server</link>.
+ </para>
+ <note>
+   <para>
+     It only
+     makes sense to create a witness server in conjunction with running
+     <application>repmgrd</application>; the witness server will require its own
+     <application>repmgrd</application> instance.
+   </para>
+ </note>
+
+</sect1>
+
+
+<sect1 id="repmgrd-network-split" xreflabel="Handling network splits with repmgrd">
+ <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>network splits</secondary>
+ </indexterm>
+
+ <indexterm>
+   <primary>network splits</primary>
+ </indexterm>
+
+ <title>Handling network splits with repmgrd</title>
+ <para>
+  A common pattern for replication cluster setups is to spread servers over
+  more than one datacentre. This can provide benefits such as geographically-
+  distributed read replicas and DR (disaster recovery capability). However
+  this also means there is a risk of disconnection at network level between
+  datacentre locations, which would result in a split-brain scenario if
+  servers in a secondary data centre were no longer able to see the primary
+  in the main data centre and promoted a standby among themselves.
+ </para>
+ <para>
+  &repmgr; enables provision of &quot;<xref linkend="witness-server">&quot; to
+  artificially create a quorum of servers in a particular location, ensuring
+  that nodes in another location will not elect a new primary if they
+  are unable to see the majority of nodes. However this approach does not
+  scale well, particularly with more complex replication setups, e.g.
+  where the majority of nodes are located outside of the primary datacentre.
+  It also means the <literal>witness</literal> node needs to be managed as an
+  extra PostgreSQL instance outside of the main replication cluster, which
+  adds administrative and programming complexity.
+ </para>
+ <para>
+  <literal>repmgr4</literal> introduces the concept of <literal>location</literal>:
+  each node is associated with an arbitrary location string (default is
+  <literal>default</literal>); this is set in <filename>repmgr.conf</filename>, e.g.:
+  <programlisting>
+    node_id=1
+    node_name=node1
+    conninfo='host=node1 user=repmgr dbname=repmgr connect_timeout=2'
+    data_directory='/var/lib/postgresql/data'
+    location='dc1'</programlisting>
+ </para>
+ <para>
+  In a failover situation, <application>repmgrd</application> will check if any servers in the
+  same location as the current primary node are visible.  If not, <application>repmgrd</application>
+  will assume a network interruption and not promote any node in any
+  other location (it will however enter <link linkend="repmgrd-degraded-monitoring">degraded monitoring</link>
+  mode until a primary becomes visible).
+ </para>
+
+</sect1>
+
+<sect1 id="repmgrd-standby-disconnection-on-failover" xreflabel="Standby disconnection on failover">
+  <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>standby disconnection on failover</secondary>
+ </indexterm>
+
+  <indexterm>
+    <primary>standby disconnection on failover</primary>
+  </indexterm>
+
+  <title>Standby disconnection on failover</title>
+  <para>
+    If <option>standby_disconnect_on_failover</option> is set to <literal>true</literal> in
+    <filename>repmgr.conf</filename>, in a failover situation <application>repmgrd</application> will forcibly disconnect
+    the local node's WAL receiver before making a failover decision.
+  </para>
+  <note>
+    <para>
+      <option>standby_disconnect_on_failover</option> is available from PostgreSQL 9.5 and later.
+      Additionally this requires that the <literal>repmgr</literal> database user is a superuser.
+    </para>
+  </note>
+  <para>
+    By doing this, it's possible to ensure that, at the point the failover decision is made, no nodes
+    are receiving data from the primary and their LSN location will be static.
+  </para>
+  <important>
+    <para>
+      <option>standby_disconnect_on_failover</option> <emphasis>must</emphasis> be set to the same value on
+      all nodes.
+    </para>
+  </important>
+  <para>
+    Note that when using <option>standby_disconnect_on_failover</option> there will be a delay of 5 seconds
+    plus however many seconds it takes to confirm the WAL receiver is disconnected before
+    <application>repmgrd</application> proceeds with the failover decision.
+  </para>
+  <para>
+    Following the failover operation, no matter what the outcome, each node will reconnect its WAL receiver.
+  </para>
+  <para>
+    If using <option>standby_disconnect_on_failover</option>, we recommend that the
+    <option>primary_visibility_consensus</option> option is also used.
+  </para>
+
+</sect1>
+
+<sect1 id="repmgrd-failover-validation" xreflabel="Failover validation">
+  <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>failover validation</secondary>
+ </indexterm>
+
+  <indexterm>
+    <primary>failover validation</primary>
+  </indexterm>
+
+  <title>Failover validation</title>
+  <para>
+    From <link linkend="release-4.3">repmgr 4.3</link>, &repmgr; makes it possible to provide a script
+    to <application>repmgrd</application> which, in a failover situation,
+    will be executed by the promotion candidate (the node which has been selected
+    to be the new primary) to confirm whether the node should actually be promoted.
+  </para>
+  <para>
+    To use this, <option>failover_validation_command</option> in <filename>repmgr.conf</filename>
+    to a script executable by the <literal>postgres</literal> system user, e.g.:
+    <programlisting>
+      failover_validation_command=/path/to/script.sh %n %a</programlisting>
+  </para>
+  <para>
+    The <literal>%n</literal> parameter will be replaced with the node ID, and the
+    <literal>%a</literal> parameter will be replaced by the node name when the script is executed.
+  </para>
+  <para>
+    This script must return an exit code of <literal>0</literal> to indicate the node should promote itself.
+    Any other value will result in the promotion being aborted and the election rerun.
+    There is a pause of <option>election_rerun_interval</option> seconds before the election is rerun.
+  </para>
+  <para>
+    Sample <application>repmgrd</application> log file output during which the failover validation
+    script rejects the proposed promotion candidate:
+    <programlisting>
+[2019-03-13 21:01:30] [INFO] visible nodes: 2; total nodes: 2; no nodes have seen the primary within the last 4 seconds
+[2019-03-13 21:01:30] [NOTICE] promotion candidate is "node2" (ID: 2)
+[2019-03-13 21:01:30] [NOTICE] executing "failover_validation_command"
+[2019-03-13 21:01:30] [DETAIL] /usr/local/bin/failover-validation.sh 2
+[2019-03-13 21:01:30] [INFO] output returned by failover validation command:
+Node ID: 2
+
+[2019-03-13 21:01:30] [NOTICE] failover validation command returned a non-zero value: "1"
+[2019-03-13 21:01:30] [NOTICE] promotion candidate election will be rerun
+[2019-03-13 21:01:30] [INFO] 1 followers to notify
+[2019-03-13 21:01:30] [NOTICE] notifying node "node3" (node ID: 3) to rerun promotion candidate selection
+INFO:  node 3 received notification to rerun promotion candidate election
+[2019-03-13 21:01:30] [NOTICE] rerunning election after 15 seconds ("election_rerun_interval")</programlisting>
+  </para>
+
+
+</sect1>
+
+  <sect1 id="cascading-replication" xreflabel="Cascading replication">
+ <indexterm>
+   <primary>repmgrd</primary>
+   <secondary>cascading replication</secondary>
+ </indexterm>
+
+ <indexterm>
+   <primary>cascading replication</primary>
+   <secondary>repmgrd</secondary>
+ </indexterm>
+
+ <title>repmgrd and cascading replication</title>
+ <para>
+  Cascading replication - where a standby can connect to an upstream node and not
+  the primary server itself - was introduced in PostgreSQL 9.2. &repmgr; and
+  <application>repmgrd</application> support cascading replication by keeping track of the relationship
+  between standby servers - each node record is stored with the node id of its
+  upstream ("parent") server (except of course the primary server).
+ </para>
+ <para>
+  In a failover situation where the primary node fails and a top-level standby
+  is promoted, a standby connected to another standby will not be affected
+  and continue working as normal (even if the upstream standby it's connected
+  to becomes the primary node). If however the node's direct upstream fails,
+  the &quot;cascaded standby&quot; will attempt to reconnect to that node's parent
+  (unless <varname>failover</varname> is set to <literal>manual</literal> in
+  <filename>repmgr.conf</filename>).
+ </para>
+
+  </sect1>
+
+
+</chapter>
--- a/doc/repmgrd-automatic-failover.xml
+++ b/doc/repmgrd-automatic-failover.xml
@@ -1,939 +0,0 @@
-<chapter id="repmgrd-automatic-failover" xreflabel="Automatic failover with repmgrd">
-
- <title>Automatic failover with repmgrd</title>
-
- <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>automatic failover</secondary>
- </indexterm>
-
- <para>
-  &repmgrd; is a management and monitoring daemon which runs
-  on each node in a replication cluster. It can automate actions such as
-  failover and updating standbys to follow the new primary, as well as
-  providing monitoring information about the state of each standby.
- </para>
-
- <sect1 id="repmgrd-witness-server" xreflabel="Using a witness server with repmgrd">
-   <title>Using a witness server</title>
-
- <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>witness server</secondary>
- </indexterm>
-
- <indexterm>
-   <primary>witness server</primary>
-   <secondary>repmgrd</secondary>
- </indexterm>
-
- <para>
-   A <xref linkend="witness-server"/> is a normal PostgreSQL instance which
-   is not part of the streaming replication cluster; its purpose is, if a
-   failover situation occurs, to provide proof that it is the primary server
-   itself which is unavailable, rather than e.g. a network split between
-   different physical locations.
- </para>
-
- <para>
-   A typical use case for a witness server is a two-node streaming replication
-   setup, where the primary and standby are in different locations (data centres).
-   By creating a witness server in the same location (data centre) as the primary,
-   if the primary becomes unavailable it's possible for the standby to decide whether
-   it can promote itself without risking a "split brain" scenario: if it can't see either the
-   witness or the primary server, it's likely there's a network-level interruption
-   and it should not promote itself. If it can see the witness but not the primary,
-   this proves there is no network interruption and the primary itself is unavailable,
-   and it can therefore promote itself (and ideally take action to fence the
-   former primary).
- </para>
- <note>
-   <para>
-     <emphasis>Never</emphasis> install a witness server on the same physical host
-     as another node in the replication cluster managed by &repmgr; - it's essential
-     the witness is not affected in any way by failure of another node.
-   </para>
- </note>
- <para>
-   For more complex replication scenarios, e.g. with multiple datacentres, it may
-   be preferable to use location-based failover, which ensures that only nodes
-   in the same location as the primary will ever be promotion candidates;
-   see <xref linkend="repmgrd-network-split"/> for more details.
- </para>
-
- <note>
-   <simpara>
-     A witness server will only be useful if &repmgrd;
-     is in use.
-   </simpara>
- </note>
-
- <sect2 id="creating-witness-server">
-   <title>Creating a witness server</title>
- <para>
-   To create a witness server, set up a normal PostgreSQL instance on a server
-   in the same physical location as the cluster's primary server.
- </para>
- <para>
-   This instance should <emphasis>not</emphasis> be on the same physical host as the primary server,
-   as otherwise if the primary server fails due to hardware issues, the witness
-   server will be lost too.
- </para>
- <note>
-   <simpara>
-     A PostgreSQL instance can only accommodate a single witness server.
-   </simpara>
-   <simpara>
-     If you are planning to use a single server to support more than one
-     witness server, a separate PostgreSQL instance is required for each
-     witness server in use.
-   </simpara>
- </note>
-
- <para>
-   The witness server should be configured in the same way as a normal
-   &repmgr; node; see section <xref linkend="configuration"/>.
- </para>
- <para>
-   Register the witness server with <xref linkend="repmgr-witness-register"/>.
-   This will create the &repmgr; extension on the witness server, and make
-   a copy of the &repmgr; metadata.
- </para>
- <note>
-   <simpara>
-    As the witness server is not part of the replication cluster, further
-    changes to the &repmgr; metadata will be synchronised by
-    &repmgrd;.
-   </simpara>
- </note>
- <para>
-   Once the witness server has been configured, &repmgrd;
-   should be started.
- </para>
-
- <para>
-  To unregister a witness server, use <xref linkend="repmgr-witness-unregister"/>.
- </para>
-
- </sect2>
-
-</sect1>
-
-
-<sect1 id="repmgrd-network-split" xreflabel="Handling network splits with repmgrd">
- <title>Handling network splits with repmgrd</title>
- <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>network splits</secondary>
- </indexterm>
-
- <indexterm>
-   <primary>network splits</primary>
- </indexterm>
-
- <para>
-  A common pattern for replication cluster setups is to spread servers over
-  more than one datacentre. This can provide benefits such as geographically-
-  distributed read replicas and DR (disaster recovery capability). However
-  this also means there is a risk of disconnection at network level between
-  datacentre locations, which would result in a split-brain scenario if
-  servers in a secondary data centre were no longer able to see the primary
-  in the main data centre and promoted a standby among themselves.
- </para>
- <para>
-  &repmgr; enables provision of &quot;<xref linkend="witness-server"/>&quot; to
-  artificially create a quorum of servers in a particular location, ensuring
-  that nodes in another location will not elect a new primary if they
-  are unable to see the majority of nodes. However this approach does not
-  scale well, particularly with more complex replication setups, e.g.
-  where the majority of nodes are located outside of the primary datacentre.
-  It also means the <literal>witness</literal> node needs to be managed as an
-  extra PostgreSQL instance outside of the main replication cluster, which
-  adds administrative and programming complexity.
- </para>
- <para>
-  <literal>repmgr4</literal> introduces the concept of <literal>location</literal>:
-  each node is associated with an arbitrary location string (default is
-  <literal>default</literal>); this is set in <filename>repmgr.conf</filename>, e.g.:
-  <programlisting>
-    node_id=1
-    node_name=node1
-    conninfo='host=node1 user=repmgr dbname=repmgr connect_timeout=2'
-    data_directory='/var/lib/postgresql/data'
-    location='dc1'</programlisting>
- </para>
- <para>
-  In a failover situation, &repmgrd; will check if any servers in the
-  same location as the current primary node are visible.  If not, &repmgrd;
-  will assume a network interruption and not promote any node in any
-  other location (it will however enter <link linkend="repmgrd-degraded-monitoring">degraded monitoring</link>
-  mode until a primary becomes visible).
- </para>
-
-</sect1>
-
-
-<sect1 id="repmgrd-primary-visibility-consensus" xreflabel="Primary visibility consensus">
-  <title>Primary visibility consensus</title>
-
-  <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>primary visibility consensus</secondary>
-  </indexterm>
-
-  <indexterm>
-   <primary>primary_visibility_consensus</primary>
-  </indexterm>
-
-  <para>
-    In more complex replication setups, particularly where replication occurs between
-    multiple datacentres, it's possible that some but not all standbys get cut off from the
-    primary (but not from the other standbys).
-  </para>
-  <para>
-    In this situation, normally it's not desirable for any of the standbys which have been
-    cut off to initiate a failover, as the primary is still functioning and standbys are
-    connected. Beginning with <link linkend="release-4.4">&repmgr; 4.4</link>
-    it is now possible for the affected standbys to build a consensus about whether
-    the primary is still available to some standbys (&quot;primary visibility consensus&quot;).
-    This is done by polling each standby (and the witness, if present) for the time it last saw the
-    primary; if any have seen the primary very recently, it's reasonable
-    to infer that the primary is still available and a failover should not be started.
-  </para>
-
-  <para>
-    The time the primary was last seen by each node can be checked by executing
-    <link linkend="repmgr-service-status"><command>repmgr service status</command></link>
-    (&repmgr; 4.2 - 4.4: <link linkend="repmgr-service-status"><command>repmgr daemon status</command></link>)
-    which includes this in its output, e.g.:
-    <programlisting>$ repmgr -f /etc/repmgr.conf service status
- ID | Name  | Role    | Status    | Upstream | repmgrd | PID   | Paused? | Upstream last seen
----+-------+---------+-----------+----------+---------+-------+---------+--------------------
- 1  | node1 | primary | * running |          | running | 27259 | no      | n/a
- 2  | node2 | standby |   running | node1    | running | 27272 | no      | 1 second(s) ago
- 3  | node3 | standby |   running | node1    | running | 27282 | no      | 0 second(s) ago
- 4  | node4 | witness | * running | node1    | running | 27298 | no      | 1 second(s) ago</programlisting>
-
-  </para>
-
-  <para>
-    To enable this functionality, in <filename>repmgr.conf</filename> set:
-    <programlisting>
-      primary_visibility_consensus=true</programlisting>
-  </para>
-  <note>
-    <para>
-      <option>primary_visibility_consensus</option> <emphasis>must</emphasis> be set to
-      <literal>true</literal> on all nodes for it to be effective.
-    </para>
-  </note>
-
-  <para>
-    The following sample &repmgrd; log output demonstrates the behaviour in a situation
-    where one of three standbys is no longer able to connect to the primary, but <emphasis>can</emphasis>
-    connect to the two other standbys (&quot;sibling nodes&quot;):
-    <programlisting>
-    [2019-05-17 05:36:12] [WARNING] unable to reconnect to node 1 after 3 attempts
-    [2019-05-17 05:36:12] [INFO] 2 active sibling nodes registered
-    [2019-05-17 05:36:12] [INFO] local node's last receive lsn: 0/7006E58
-    [2019-05-17 05:36:12] [INFO] checking state of sibling node "node3" (ID: 3)
-    [2019-05-17 05:36:12] [INFO] node "node3" (ID: 3) reports its upstream is node 1, last seen 1 second(s) ago
-    [2019-05-17 05:36:12] [NOTICE] node 3 last saw primary node 1 second(s) ago, considering primary still visible
-    [2019-05-17 05:36:12] [INFO] last receive LSN for sibling node "node3" (ID: 3) is: 0/7006E58
-    [2019-05-17 05:36:12] [INFO] node "node3" (ID: 3) has same LSN as current candidate "node2" (ID: 2)
-    [2019-05-17 05:36:12] [INFO] checking state of sibling node "node4" (ID: 4)
-    [2019-05-17 05:36:12] [INFO] node "node4" (ID: 4) reports its upstream is node 1, last seen 0 second(s) ago
-    [2019-05-17 05:36:12] [NOTICE] node 4 last saw primary node 0 second(s) ago, considering primary still visible
-    [2019-05-17 05:36:12] [INFO] last receive LSN for sibling node "node4" (ID: 4) is: 0/7006E58
-    [2019-05-17 05:36:12] [INFO] node "node4" (ID: 4) has same LSN as current candidate "node2" (ID: 2)
-    [2019-05-17 05:36:12] [INFO] 2 nodes can see the primary
-    [2019-05-17 05:36:12] [DETAIL] following nodes can see the primary:
-     - node "node3" (ID: 3): 1 second(s) ago
-     - node "node4" (ID: 4): 0 second(s) ago
-    [2019-05-17 05:36:12] [NOTICE] cancelling failover as some nodes can still see the primary
-    [2019-05-17 05:36:12] [NOTICE] election cancelled
-    [2019-05-17 05:36:14] [INFO] node "node2" (ID: 2) monitoring upstream node "node1" (ID: 1) in degraded state</programlisting>
-    In this situation it will cancel the failover and enter degraded monitoring node,
-    waiting for the primary to reappear.
-  </para>
-</sect1>
-
-<sect1 id="repmgrd-standby-disconnection-on-failover" xreflabel="Standby disconnection on failover">
-  <title>Standby disconnection on failover</title>
-
-  <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>standby disconnection on failover</secondary>
- </indexterm>
-
-  <indexterm>
-    <primary>standby disconnection on failover</primary>
-  </indexterm>
-
-  <para>
-    If <option>standby_disconnect_on_failover</option> is set to <literal>true</literal> in
-    <filename>repmgr.conf</filename>, in a failover situation &repmgrd; will forcibly disconnect
-    the local node's WAL receiver, and wait for the WAL receiver on all sibling nodes to be
-	disconnected, before making a failover decision.
-  </para>
-  <note>
-    <para>
-      <option>standby_disconnect_on_failover</option> is available with PostgreSQL 9.5 and later.
-      Additionally this requires that the <literal>repmgr</literal> database user is a superuser.
-    </para>
-  </note>
-  <para>
-    By doing this, it's possible to ensure that, at the point the failover decision is made, no nodes
-    are receiving data from the primary and their LSN location will be static.
-  </para>
-  <important>
-    <para>
-      <option>standby_disconnect_on_failover</option> <emphasis>must</emphasis> be set to the same value on
-      all nodes.
-    </para>
-  </important>
-  <para>
-    Note that when using <option>standby_disconnect_on_failover</option> there will be a delay of 5 seconds
-    plus however many seconds it takes to confirm the WAL receiver is disconnected before
-    &repmgrd; proceeds with the failover decision.
-  </para>
-  <para>
-	&repmgrd; will wait up to <option>sibling_nodes_disconnect_timeout</option> seconds (default:
-	<literal>30</literal>) to confirm that the WAL receiver on all sibling nodes hase been
-	disconnected before proceding with the failover operation. If the timeout is reached, the
-	failover operation will go ahead anyway.
-  </para>
-  <para>
-    Following the failover operation, no matter what the outcome, each node will reconnect its WAL receiver.
-  </para>
-  <para>
-    If using <option>standby_disconnect_on_failover</option>, we recommend that the
-    <option>primary_visibility_consensus</option> option is also used.
-  </para>
-
-</sect1>
-
-<sect1 id="repmgrd-failover-validation" xreflabel="Failover validation">
-  <title>Failover validation</title>
-
-  <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>failover validation</secondary>
- </indexterm>
-
-  <indexterm>
-    <primary>failover validation</primary>
-  </indexterm>
-
-  <para>
-    From <link linkend="release-4.3">repmgr 4.3</link>, &repmgr; makes it possible to provide a script
-    to &repmgrd; which, in a failover situation,
-    will be executed by the promotion candidate (the node which has been selected
-    to be the new primary) to confirm whether the node should actually be promoted.
-  </para>
-  <para>
-    To use this, <option>failover_validation_command</option> in <filename>repmgr.conf</filename>
-    to a script executable by the <literal>postgres</literal> system user, e.g.:
-    <programlisting>
-      failover_validation_command=/path/to/script.sh %n</programlisting>
-  </para>
-  <para>
-    The <literal>%n</literal> parameter will be replaced with the node ID when the script is
-    executed. A number of other parameters are also available, see section
-    &quot;<xref linkend="repmgrd-automatic-failover-configuration-optional"/>&quot; for details.
-  </para>
-  <para>
-    This script must return an exit code of <literal>0</literal> to indicate the node should promote itself.
-    Any other value will result in the promotion being aborted and the election rerun.
-    There is a pause of <option>election_rerun_interval</option> seconds before the election is rerun.
-  </para>
-  <para>
-    Sample &repmgrd; log file output during which the failover validation
-    script rejects the proposed promotion candidate:
-    <programlisting>
-[2019-03-13 21:01:30] [INFO] visible nodes: 2; total nodes: 2; no nodes have seen the primary within the last 4 seconds
-[2019-03-13 21:01:30] [NOTICE] promotion candidate is "node2" (ID: 2)
-[2019-03-13 21:01:30] [NOTICE] executing "failover_validation_command"
-[2019-03-13 21:01:30] [DETAIL] /usr/local/bin/failover-validation.sh 2
-[2019-03-13 21:01:30] [INFO] output returned by failover validation command:
-Node ID: 2
-
-[2019-03-13 21:01:30] [NOTICE] failover validation command returned a non-zero value: "1"
-[2019-03-13 21:01:30] [NOTICE] promotion candidate election will be rerun
-[2019-03-13 21:01:30] [INFO] 1 followers to notify
-[2019-03-13 21:01:30] [NOTICE] notifying node "node3" (ID: 3) to rerun promotion candidate selection
-INFO:  node 3 received notification to rerun promotion candidate election
-[2019-03-13 21:01:30] [NOTICE] rerunning election after 15 seconds ("election_rerun_interval")</programlisting>
-  </para>
-
-
-</sect1>
-
- <sect1 id="cascading-replication" xreflabel="Cascading replication">
-  <title>repmgrd and cascading replication</title>
-
-  <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>cascading replication</secondary>
-  </indexterm>
-
- <indexterm>
-   <primary>cascading replication</primary>
-   <secondary>repmgrd</secondary>
- </indexterm>
-
- <para>
-  Cascading replication - where a standby can connect to an upstream node and not
-  the primary server itself - was introduced in PostgreSQL 9.2. &repmgr; and
-  &repmgrd; support cascading replication by keeping track of the relationship
-  between standby servers - each node record is stored with the node id of its
-  upstream ("parent") server (except of course the primary server).
- </para>
- <para>
-  In a failover situation where the primary node fails and a top-level standby
-  is promoted, a standby connected to another standby will not be affected
-  and continue working as normal (even if the upstream standby it's connected
-  to becomes the primary node). If however the node's direct upstream fails,
-  the &quot;cascaded standby&quot; will attempt to reconnect to that node's parent
-  (unless <varname>failover</varname> is set to <literal>manual</literal> in
-  <filename>repmgr.conf</filename>).
- </para>
-
-  </sect1>
-
-<sect1 id="repmgrd-primary-child-disconnection" xreflabel="Monitoring standby disconnections on the primary">
-  <title>Monitoring standby disconnections on the primary node</title>
-
-  <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>standby disconnection</secondary>
-  </indexterm>
-
-  <indexterm>
-   <primary>repmgrd</primary>
-   <secondary>child node disconnection</secondary>
-  </indexterm>
-
-  <note>
-    <para>
-      This functionality is available in <link linkend="release-4.4">&repmgr; 4.4</link> and later.
-    </para>
-  </note>
-  <para>
-    When running on the primary node, &repmgrd; can
-    monitor connections and in particular disconnections by its attached
-    child nodes (standbys, and if in use, the witness server), and optionally
-    execute a custom command if certain criteria are met (such as the number of
-    attached nodes falling to zero following a failover to a new primary); this
-    command can be used for example to &quot;fence&quot; the node and ensure it
-    is isolated from any applications attempting to access the replication cluster.
-  </para>
-
-  <note>
-	<para>
-	  Currently &repmgrd; can only detect disconnections
-	  of streaming replication standbys and cannot determine whether a standby
-	  has disconnected and fallen back to archive recovery.
-	</para>
-	<para>
-	  See section <link linkend="repmgrd-primary-child-disconnection-caveats">caveats</link> below.
-	</para>
-  </note>
-
-  <sect2 id="repmgrd-primary-child-disconnection-monitoring-process">
-	<title>Standby disconnections monitoring process and criteria</title>
-	<para>
-	  &repmgrd; monitors attached child nodes and decides
-	  whether to invoke the user-defined command based on the following process
-	  and criteria:
-    <itemizedlist>
-
-      <listitem>
-        <para>
-          Every few seconds (defined by the configuration parameter <varname>child_nodes_check_interval</varname>;
-          default: <literal>5</literal> seconds, a value of <literal>0</literal> disables this altogether), &repmgrd; queries
-          the <literal>pg_stat_replication</literal> system view and compares
-          the nodes present there against the list of nodes registered with &repmgr; which
-          should be attached to the primary.
-        </para>
-        <para>
-          If a witness server is in use, &repmgrd; connects to it and checks which upstream node
-          it is following.
-        </para>
-      </listitem>
-
-      <listitem>
-        <para>
-          If a child node (standby) is no longer present in <literal>pg_stat_replication</literal>,
-          &repmgrd; notes the time it detected the node's absence, and additionally generates a
-          <literal>child_node_disconnect</literal> event.
-        </para>
-        <para>
-          If a witness server is in use, and it is no longer following the primary, or not
-          reachable at all, &repmgrd; notes the time it detected the node's absence, and additionally generates a
-          <literal>child_node_disconnect</literal> event.
-        </para>
-      </listitem>
-
-      <listitem>
-        <para>
-          If a child node (standby) which was absent from <literal>pg_stat_replication</literal> reappears,
-          &repmgrd; clears the time it detected the node's absence, and additionally generates a
-          <literal>child_node_reconnect</literal> event.
-        </para>
-        <para>
-          If a witness server is in use, which was previously not reachable or not following the
-          primary node, has become reachable and is following the primary node,  &repmgrd; clears the
-          time it detected the node's absence, and additionally generates a
-          <literal>child_node_reconnect</literal> event.
-        </para>
-      </listitem>
-
-      <listitem>
-        <para>
-          If an entirely new child node (standby or witness) is detected, &repmgrd; adds it to its internal list
-          and additionally generates a <literal>child_node_new_connect</literal> event.
-        </para>
-      </listitem>
-
-      <listitem>
-        <para>
-          If the <varname>child_nodes_disconnect_command</varname> parameter is set in
-          <filename>repmgr.conf</filename>, &repmgrd; will then loop through all child nodes.
-          If it determines that insufficient child nodes are connected, and a
-          minimum of <varname>child_nodes_disconnect_timeout</varname> seconds (default: <literal>30</literal>)
-          has elapsed since  the last node became disconnected, &repmgrd; will then execute the
-          <varname>child_nodes_disconnect_command</varname> script.
-        </para>
-        <para>
-          By default, the <varname>child_nodes_disconnect_command</varname> will only be executed
-          if all child nodes are disconnected. If <varname>child_nodes_connected_min_count</varname>
-          is set, the <varname>child_nodes_disconnect_command</varname> script will be triggered
-          if the number of connected child nodes falls below the specified value (e.g.
-          if set to <literal>2</literal>, the script will be triggered if only one child node
-          is connected). Alternatively, if <varname>child_nodes_disconnect_min_count</varname>
-          and more than that number of child nodes disconnects, the script will be triggered.
-        </para>
-        <note>
-          <para>
-            By default, a witness node, if in use, will <emphasis>not</emphasis> be counted as a
-            child node for the purposes of determining whether to execute
-            <varname>child_nodes_disconnect_command</varname>.
-          </para>
-          <para>
-            To enable the witness node to be counted as a child node, set
-            <varname>child_nodes_connected_include_witness</varname> in <filename>repmgr.conf</filename>
-            to <literal>true</literal>
-            (and <link linkend="repmgrd-reloading-configuration">reload the configuration</link> if &repmgrd;
-            is running).
-          </para>
-        </note>
-      </listitem>
-
-      <listitem>
-        <para>
-          Note that child nodes which are not attached when &repmgrd;
-          starts will <emphasis>not</emphasis> be considered as missing, as &repmgrd;
-          cannot know why they are not attached.
-        </para>
-      </listitem>
-
-    </itemizedlist>
-	</para>
-  </sect2>
-
-  <sect2 id="repmgrd-primary-child-disconnection-example">
-	<title>Standby disconnections monitoring process example</title>
-	<para>
-	  This example shows typical &repmgrd; log output from a three-node cluster
-	  (primary and two child nodes), with <varname>child_nodes_connected_min_count</varname>
-	  set to <literal>2</literal>.
-	</para>
-	<para>
-	  &repmgrd; on the primary has started up, while two child
-	  nodes are being provisioned:
-	  <programlisting>
-[2019-04-24 15:25:33] [INFO] monitoring primary node "node1" (ID: 1) in normal state
-[2019-04-24 15:25:35] [NOTICE] new node "node2" (ID: 2) has connected
-[2019-04-24 15:25:35] [NOTICE] 1 (of 1) child nodes are connected, but at least 2 child nodes required
-[2019-04-24 15:25:35] [INFO] no child nodes have detached since repmgrd startup
-(...)
-[2019-04-24 15:25:44] [NOTICE] new node "node3" (ID: 3) has connected
-[2019-04-24 15:25:46] [INFO] monitoring primary node "node1" (ID: 1) in normal state
-(...)</programlisting>
-	</para>
-	<para>
-	  One of the child nodes has disconnected; &repmgrd;
-	  is now waiting <varname>child_nodes_disconnect_timeout</varname> seconds
-	  before executing <varname>child_nodes_disconnect_command</varname>:
-	  <programlisting>
-[2019-04-24 15:28:11] [INFO] monitoring primary node "node1" (ID: 1) in normal state
-[2019-04-24 15:28:17] [INFO] monitoring primary node "node1" (ID: 1) in normal state
-[2019-04-24 15:28:19] [NOTICE] node "node3" (ID: 3) has disconnected
-[2019-04-24 15:28:19] [NOTICE] 1 (of 2) child nodes are connected, but at least 2 child nodes required
-[2019-04-24 15:28:19] [INFO] most recently detached child node was 3 (ca. 0 seconds ago), not triggering "child_nodes_disconnect_command"
-[2019-04-24 15:28:19] [DETAIL] "child_nodes_disconnect_timeout" set To 30 seconds
-(...)</programlisting>
-	</para>
-	<para>
-	  <varname>child_nodes_disconnect_command</varname> is executed once:
-	  <programlisting>
-[2019-04-24 15:28:49] [INFO] most recently detached child node was 3 (ca. 30 seconds ago), triggering "child_nodes_disconnect_command"
-[2019-04-24 15:28:49] [INFO] "child_nodes_disconnect_command" is:
-	"/usr/bin/fence-all-the-things.sh"
-[2019-04-24 15:28:51] [NOTICE] 1 (of 2) child nodes are connected, but at least 2 child nodes required
-[2019-04-24 15:28:51] [INFO] "child_nodes_disconnect_command" was previously executed, taking no action</programlisting>
-	</para>
-
-  </sect2>
-
-  <sect2 id="repmgrd-primary-child-disconnection-caveats">
-	<title>Standby disconnections monitoring caveats</title>
-	<para>
-	  The following caveats should be considered if you are intending to use this functionality.
-	</para>
-	<para>
-	  <itemizedlist mark="bullet">
-		<listitem>
-          <para>
-			If a child node is configured to use archive recovery, it's possible that
-			the child node will disconnect from the primary node and fall back to
-			archive recovery. In this case &repmgrd;
-			will nevertheless register a node disconnection.
-		  </para>
-		</listitem>
-
-        <listitem>
-          <para>
-			&repmgr; relies on <varname>application_name</varname> in the child node's
-			<varname>primary_conninfo</varname> string to be the same as the node name
-			defined in the node's <filename>repmgr.conf</filename> file. Furthermore,
-			this <varname>application_name</varname> must be unique across the replication
-			cluster.
-          </para>
-		  <para>
-			If a custom <varname>application_name</varname> is used, or the
-			<varname>application_name</varname> is not unique across the replication
-			cluster, &repmgr; will not be able to reliably monitor child node connections.
-		  </para>
-        </listitem>
-
-	  </itemizedlist>
-	</para>
-  </sect2>
-
-
-  <sect2 id="repmgrd-primary-child-disconnection-configuration">
-	<title>Standby disconnections monitoring process configuration</title>
-	<para>
-	  The following parameters, set in <filename>repmgr.conf</filename>,
-	  control how child node disconnection monitoring operates.
-	</para>
-	<variablelist>
-
-      <varlistentry>
-        <term><varname>child_nodes_check_interval</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_check_interval</primary>
-		    <secondary>child node disconnection monitoring</secondary>
-		  </indexterm>
-
-		  <para>
-			Interval (in seconds) after which &repmgrd; queries the
-			<literal>pg_stat_replication</literal> system view and compares the nodes present
-			there against the list of nodes registered with repmgr which should be attached to the primary.
-		  </para>
-		  <para>
-			Default is <literal>5</literal> seconds, a value of <literal>0</literal> disables this check
-			altogether.
-		  </para>
-		</listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-        <term><varname>child_nodes_disconnect_command</varname></term>
-
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_disconnect_command</primary>
-		    <secondary>child node disconnection monitoring</secondary>
-		  </indexterm>
-
-		  <para>
-			User-definable script to be executed when &repmgrd;
-			determines that an insufficient number of child nodes are connected. By default
-			the script is executed when no child nodes are executed, but the execution
-			threshold can be modified by setting one of <varname>child_nodes_connected_min_count</varname>
-			or<varname>child_nodes_disconnect_min_count</varname> (see below).
-		  </para>
-		  <para>
-			The <varname>child_nodes_disconnect_command</varname> script can be
-			any user-defined script or program. It <emphasis>must</emphasis> be able
-			to be executed by the system user under which the PostgreSQL server itself
-			runs (usually <literal>postgres</literal>).
-		  </para>
-		  <note>
-			<para>
-			  If <varname>child_nodes_disconnect_command</varname> is not set, no action
-			  will be taken.
-			</para>
-		  </note>
-		  <para>
-			If specified, the following format placeholder will be substituted when
-			executing <varname>child_nodes_disconnect_command</varname>:
-		  </para>
-
-		   <variablelist>
-			 <varlistentry>
-			   <term><option>%p</option></term>
-			   <listitem>
-				 <para>
-				   ID of the node executing the <varname>child_nodes_disconnect_command</varname> script.
-				 </para>
-			   </listitem>
-			 </varlistentry>
-		   </variablelist>
-
-		  <para>
-			The <varname>child_nodes_disconnect_command</varname> script will only be executed once
-			while the criteria for its execution are met. If the criteria for its execution are no longer
-			met (i.e. some child nodes have reconnected), it will be executed again if
-			the criteria for its execution are met again.
-          </para>
-          <para>
-			The <varname>child_nodes_disconnect_command</varname> script will not be executed if
-			&repmgrd; is <link linkend="repmgrd-pausing">paused</link>.
-          </para>
-
-		</listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-        <term><varname>child_nodes_disconnect_timeout</varname></term>
-
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_disconnect_timeout</primary>
-		    <secondary>child node disconnection monitoring</secondary>
-		  </indexterm>
-
-		  <para>
-			If &repmgrd; determines that an insufficient number of
-			child nodes are connected, it will wait for the specified number of seconds
-			to execute the <varname>child_nodes_disconnect_command</varname>.
-		  </para>
-		  <para>
-			Default: <literal>30</literal> seconds.
-		  </para>
-		</listitem>
-	  </varlistentry>
-
-      <varlistentry>
-        <term><varname>child_nodes_connected_min_count</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_connected_min_count</primary>
-		    <secondary>child node disconnection monitoring</secondary>
-		  </indexterm>
-
-		  <para>
-			If the number of child nodes connected falls below the number specified in
-			this parameter, the <varname>child_nodes_disconnect_command</varname> script
-			will be executed.
-		  </para>
-		  <para>
-			For example, if <varname>child_nodes_connected_min_count</varname> is set
-			to <literal>2</literal>, the <varname>child_nodes_disconnect_command</varname>
-			script will be executed if one or no child nodes are connected.
-		  </para>
-		  <para>
-			Note that <varname>child_nodes_connected_min_count</varname> overrides any value
-			set in <varname>child_nodes_disconnect_min_count</varname>.
-		  </para>
-		  <para>
-			If neither of <varname>child_nodes_connected_min_count</varname> or
-			<varname>child_nodes_disconnect_min_count</varname> are set,
-			the <varname>child_nodes_disconnect_command</varname> script
-			will be executed when no child nodes are connected.
-		  </para>
-          <para>
-            A witness node, if in use, will not be counted as a child node unless
-            <varname>child_nodes_connected_include_witness</varname> is set to <literal>true</literal>.
-          </para>
-		</listitem>
-	  </varlistentry>
-
-
-	  <varlistentry>
-        <term><varname>child_nodes_disconnect_min_count</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_disconnect_min_count</primary>
-		    <secondary>child node disconnection monitoring</secondary>
-		  </indexterm>
-
-		  <para>
-			If the number of disconnected child nodes exceeds the number specified in
-			this parameter, the <varname>child_nodes_disconnect_command</varname> script
-			will be executed.
-		  </para>
-
-		  <para>
-			For example, if <varname>child_nodes_disconnect_min_count</varname> is set
-			to <literal>2</literal>, the <varname>child_nodes_disconnect_command</varname>
-			script will be executed if more than two child nodes are disconnected.
-		  </para>
-
-		  <para>
-			Note that any value set in <varname>child_nodes_disconnect_min_count</varname>
-			will be overriden by <varname>child_nodes_connected_min_count</varname>.
-		  </para>
-		  <para>
-			If neither of <varname>child_nodes_connected_min_count</varname> or
-			<varname>child_nodes_disconnect_min_count</varname> are set,
-			the <varname>child_nodes_disconnect_command</varname> script
-			will be executed when no child nodes are connected.
-		  </para>
-
-          <para>
-            A witness node, if in use, will not be counted as a child node unless
-            <varname>child_nodes_connected_include_witness</varname> is set to <literal>true</literal>.
-          </para>
-
-		</listitem>
-	  </varlistentry>
-
-
-	  <varlistentry>
-        <term><varname>child_nodes_connected_include_witness</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_connected_include_witness</primary>
-		    <secondary>child node disconnection monitoring</secondary>
-		  </indexterm>
-
-		  <para>
-            Whether to count the witness node (if in use) as a child node when
-            determining whether to execute <varname>child_nodes_disconnect_command</varname>.
-          </para>
-          <para>
-            Default to <literal>false</literal>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-	</variablelist>
-
-  </sect2>
-
-  <sect2 id="repmgrd-primary-child-disconnection-events">
-	<title>Standby disconnections monitoring process event notifications</title>
-	<para>
-	  The following <link linkend="event-notifications">event notifications</link> may be generated:
-	</para>
-	<variablelist>
-
-      <varlistentry>
-        <term><varname>child_node_disconnect</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_node_disconnect</primary>
-		    <secondary>event notification</secondary>
-		  </indexterm>
-
-          <para>
-			This event is generated after &repmgrd;
-			detects that a child node is no longer streaming from the primary node.
-          </para>
-		  <para>
-			Example:
-			<programlisting>
-$ repmgr cluster event --event=child_node_disconnect
- Node ID | Name  | Event                 | OK | Timestamp           | Details
---------+-------+-----------------------+----+---------------------+--------------------------------------------
- 1       | node1 | child_node_disconnect | t  | 2019-04-24 12:41:36 | node "node3" (ID: 3) has disconnected</programlisting>
-		  </para>
-        </listitem>
-      </varlistentry>
-
-	  <varlistentry>
-        <term><varname>child_node_reconnect</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_node_reconnect</primary>
-		    <secondary>event notification</secondary>
-		  </indexterm>
-
-          <para>
-			This event is generated after &repmgrd;
-			detects that a child node has resumed streaming from the primary node.
-          </para>
-		  <para>
-			Example:
-			<programlisting>
-$ repmgr cluster event --event=child_node_reconnect
- Node ID | Name  | Event                | OK | Timestamp           | Details
---------+-------+----------------------+----+---------------------+------------------------------------------------------------
- 1       | node1 | child_node_reconnect | t  | 2019-04-24 12:42:19 | node "node3" (ID: 3) has reconnected after 42 seconds</programlisting>
-		  </para>
-        </listitem>
-      </varlistentry>
-
-	  <varlistentry>
-        <term><varname>child_node_new_connect</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_node_new_connect</primary>
-		    <secondary>event notification</secondary>
-		  </indexterm>
-
-          <para>
-			This event is generated after &repmgrd;
-			detects that a new child node has been registered with &repmgr; and has
-			connected to the primary.
-          </para>
-		  <para>
-			Example:
-			<programlisting>
-$ repmgr cluster event --event=child_node_new_connect
- Node ID | Name  | Event                  | OK | Timestamp           | Details
---------+-------+------------------------+----+---------------------+---------------------------------------------
- 1       | node1 | child_node_new_connect | t  | 2019-04-24 12:41:30 | new node "node3" (ID: 3) has connected</programlisting>
-		  </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><varname>child_nodes_disconnect_command</varname></term>
-        <listitem>
-          <indexterm>
-		    <primary>child_nodes_disconnect_command</primary>
-		    <secondary>event notification</secondary>
-		  </indexterm>
-
-          <para>
-			This event is generated after &repmgrd; detects
-			that sufficient child nodes have been disconnected for a sufficient amount
-			of time to trigger execution of the <varname>child_nodes_disconnect_command</varname>.
-          </para>
-		  <para>
-			Example:
-			<programlisting>
-$ repmgr cluster event --event=child_nodes_disconnect_command
- Node ID | Name  | Event                          | OK | Timestamp           | Details
---------+-------+--------------------------------+----+---------------------+--------------------------------------------------------
- 1       | node1 | child_nodes_disconnect_command | t  | 2019-04-24 13:08:17 | "child_nodes_disconnect_command" successfully executed</programlisting>
-		  </para>
-        </listitem>
-      </varlistentry>
-
-	</variablelist>
-
-  </sect2>
-
-
-</sect1>
-
-
-</chapter>
--- a/doc/repmgrd-bdr.sgml
+++ b/doc/repmgrd-bdr.sgml
@@ -0,0 +1,415 @@
+<chapter id="repmgrd-bdr">
+  <indexterm>
+    <primary>repmgrd</primary>
+    <secondary>BDR</secondary>
+  </indexterm>
+
+  <indexterm>
+    <primary>BDR</primary>
+  </indexterm>
+
+  <title>BDR failover with repmgrd</title>
+  <para>
+    &repmgr; 4.x provides support for monitoring BDR nodes and taking action in
+    case one of the nodes fails.
+  </para>
+  <note>
+    <simpara>
+      Due to the nature of BDR 1.x/2.x, it's only safe to use this solution for
+      a two-node scenario. Introducing additional nodes will create an inherent
+      risk of node desynchronisation if a node goes down without being cleanly
+      removed from the cluster.
+    </simpara>
+  </note>
+  <para>
+    In contrast to streaming replication, there's no concept of "promoting" a new
+    primary node with BDR. Instead, "failover" involves monitoring both nodes
+    with <application>repmgrd</application> and redirecting queries from the failed node to the remaining
+    active node. This can be done by using an
+    <link linkend="event-notifications">event notification</link> script
+    which is called by <application>repmgrd</application> to dynamically
+    reconfigure a proxy server/connection pooler such as <application>PgBouncer</application>.
+  </para>
+
+  <sect1 id="bdr-prerequisites" xreflabel="BDR prequisites">
+    <title>Prerequisites</title>
+    <para>
+      &repmgr; 4 requires PostgreSQL 9.4 or 9.6 with the BDR 2 extension
+      enabled and configured for a two-node BDR network. &repmgr; 4 packages
+      must be installed on each node before attempting to configure
+      <application>repmgr</application>.
+    </para>
+    <note>
+      <simpara>
+        &repmgr; 4 will refuse to install if it detects more than two BDR nodes.
+      </simpara>
+    </note>
+    <para>
+      Application database connections *must* be passed through a proxy server/
+      connection pooler such as <application>PgBouncer</application>, and it must be possible to dynamically
+      reconfigure that from <application>repmgrd</application>. The example demonstrated in this document
+      will use <application>PgBouncer</application>
+    </para>
+    <para>
+      The proxy server / connection poolers must <emphasis>not</emphasis>
+      be installed on the database servers.
+    </para>
+    <para>
+      For this example, it's assumed password-less SSH connections are available
+      from the PostgreSQL servers to the servers where <application>PgBouncer</application>
+      runs, and that the user on those servers has permission to alter the
+      <application>PgBouncer</application> configuration files.
+    </para>
+    <para>
+      PostgreSQL connections must be possible between each node, and each node
+      must be able to connect to each PgBouncer instance.
+    </para>
+  </sect1>
+
+  <sect1 id="bdr-configuration" xreflabel="BDR configuration">
+    <title>Configuration</title>
+    <para>
+      A sample configuration for <filename>repmgr.conf</filename> on each
+      BDR node would look like this:
+      <programlisting>
+        # Node information
+        node_id=1
+        node_name='node1'
+        conninfo='host=node1 dbname=bdrtest user=repmgr connect_timeout=2'
+        data_directory='/var/lib/postgresql/data'
+        replication_type='bdr'
+
+        # Event notification configuration
+        event_notifications=bdr_failover
+        event_notification_command='/path/to/bdr-pgbouncer.sh %n %e %s "%c" "%a" >> /tmp/bdr-failover.log 2>&1'
+
+        # repmgrd options
+        monitor_interval_secs=5
+        reconnect_attempts=6
+        reconnect_interval=5</programlisting>
+    </para>
+    <para>
+      Adjust settings as appropriate; copy and adjust for the second node (particularly
+      the values <varname>node_id</varname>, <varname>node_name</varname>
+      and <varname>conninfo</varname>).
+    </para>
+    <para>
+      Note that the values provided for the <varname>conninfo</varname> string
+      must be valid for connections from <emphasis>both</emphasis> nodes in the
+      replication cluster. The database must be the BDR-enabled database.
+    </para>
+    <para>
+      If defined, the <varname>event_notifications</varname> parameter will restrict
+      execution of the script defined in  <varname>event_notification_command</varname>
+      to the specified event(s).
+    </para>
+    <note>
+      <simpara>
+        <varname>event_notification_command</varname> is the script which does the actual "heavy lifting"
+        of reconfiguring the proxy server/ connection pooler. It is fully
+        user-definable; see section <xref linkend="bdr-event-notification-command"> for a reference
+        implementation.
+      </simpara>
+    </note>
+
+  </sect1>
+
+  <sect1 id="bdr-repmgr-setup" xreflabel="repmgr setup with BDR">
+    <title>repmgr setup</title>
+    <para>
+      Register both nodes; example on <literal>node1</literal>:
+      <programlisting>
+        $ repmgr -f /etc/repmgr.conf bdr register
+        NOTICE: attempting to install extension "repmgr"
+        NOTICE: "repmgr" extension successfully installed
+        NOTICE: node record created for node 'node1' (ID: 1)
+        NOTICE: BDR node 1 registered (conninfo: host=node1 dbname=bdrtest user=repmgr)</programlisting>
+    </para>
+    <para>
+      and on <literal>node1</literal>:
+      <programlisting>
+        $ repmgr -f /etc/repmgr.conf bdr register
+        NOTICE: node record created for node 'node2' (ID: 2)
+        NOTICE: BDR node 2 registered (conninfo: host=node2 dbname=bdrtest user=repmgr)</programlisting>
+    </para>
+    <para>
+      The <literal>repmgr</literal> extension will be automatically created
+      when the first node is registered, and will be propagated to the second
+      node.
+    </para>
+    <important>
+      <simpara>
+        Ensure the &repmgr; package is available on both nodes before
+        attempting to register the first node.
+      </simpara>
+    </important>
+    <para>
+      At this point the meta data for both nodes has been created; executing
+      <xref linkend="repmgr-cluster-show"> (on either node) should produce output like this:
+      <programlisting>
+        $ repmgr -f /etc/repmgr.conf cluster show
+        ID | Name  | Role | Status    | Upstream | Location | Connection string
+       ----+-------+------+-----------+----------+--------------------------------------------------------
+        1  | node1 | bdr  | * running |          | default  | host=node1 dbname=bdrtest user=repmgr connect_timeout=2
+        2  | node2 | bdr  | * running |          | default  | host=node2 dbname=bdrtest user=repmgr connect_timeout=2</programlisting>
+    </para>
+    <para>
+      Additionally it's possible to display log of significant events;  executing
+      <xref linkend="repmgr-cluster-event"> (on either node) should produce output like this:
+      <programlisting>
+        $ repmgr -f /etc/repmgr.conf cluster event
+        Node ID | Event        | OK | Timestamp           | Details
+       ---------+--------------+----+---------------------+----------------------------------------------
+        2       | bdr_register | t  | 2017-07-27 17:51:48 | node record created for node 'node2' (ID: 2)
+        1       | bdr_register | t  | 2017-07-27 17:51:00 | node record created for node 'node1' (ID: 1)
+      </programlisting>
+    </para>
+    <para>
+      At this point there will only be records for the two node registrations (displayed here
+      in reverse chronological order).
+    </para>
+  </sect1>
+
+  <sect1 id="bdr-event-notification-command" xreflabel="Defining the BDR failover &quot;event_notification command&quot;">
+    <title>Defining the BDR failover "event_notification_command"</title>
+    <para>
+      Key to "failover" execution is the <literal>event_notification_command</literal>,
+      which is a user-definable script specified in <filename>repmpgr.conf</filename>
+      and which can use a &repmgr; <link linkend="event-notifications">event notification</link>
+      to reconfigure the proxy server / connection pooler so it points to the other, still-active node.
+      Details of the event will be passed as parameters to the script.
+    </para>
+    <para>
+      Following parameter placeholders are available for the script definition in <filename>repmpgr.conf</filename>;
+      these will be replaced with the appropriate value when the script is executed:
+    </para>
+
+    <variablelist>
+      <varlistentry>
+        <term><option>%n</option></term>
+        <listitem>
+          <para>
+            node ID
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>%e</option></term>
+        <listitem>
+          <para>
+            event type
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>%t</option></term>
+        <listitem>
+          <para>
+            success (1 or 0)
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>%t</option></term>
+        <listitem>
+          <para>
+            timestamp
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>%d</option></term>
+        <listitem>
+          <para>
+            details
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>%c</option></term>
+        <listitem>
+          <para>
+            conninfo string of the next available node (<varname>bdr_failover</varname> and <varname>bdr_recovery</varname>)
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>%a</option></term>
+        <listitem>
+          <para>
+            name of the next available node (<varname>bdr_failover</varname> and <varname>bdr_recovery</varname>)
+          </para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+
+    <para>
+      Note that <literal>%c</literal> and <literal>%a</literal> are only provided with
+      particular failover events, in this case <varname>bdr_failover</varname>.
+    </para>
+    <para>
+      The provided sample script
+     (<literal><ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/scripts/bdr-pgbouncer.sh">scripts/bdr-pgbouncer.sh</ulink></literal>)
+      is configured as follows:
+      <programlisting>
+        event_notification_command='/path/to/bdr-pgbouncer.sh %n %e %s "%c" "%a"'</programlisting>
+    </para>
+    <para>
+      and parses the placeholder parameters like this:
+      <programlisting>
+        NODE_ID=$1
+        EVENT_TYPE=$2
+        SUCCESS=$3
+        NEXT_CONNINFO=$4
+        NEXT_NODE_NAME=$5</programlisting>
+    </para>
+    <note>
+      <para>
+        The sample script also contains some hard-coded values for the <application>PgBouncer</application>
+        configuration for both nodes; these will need to be adjusted for your local environment
+        (ideally the scripts would be maintained as templates and generated by some
+        kind of provisioning system).
+      </para>
+    </note>
+
+    <para>
+      The script performs following steps:
+      <itemizedlist spacing="compact" mark="bullet">
+        <listitem>
+          <simpara>pauses <application>PgBouncer</application> on all nodes</simpara>
+        </listitem>
+        <listitem>
+          <simpara>recreates the <application>PgBouncer</application> configuration file on each
+            node using the information provided by <application>repmgrd</application>
+            (primarily the <varname>conninfo</varname> string) to configure
+            <application>PgBouncer</application></simpara>
+        </listitem>
+        <listitem>
+          <simpara>reloads the <application>PgBouncer</application> configuration</simpara>
+        </listitem>
+        <listitem>
+          <simpara>executes the <command>RESUME</command> command (in <application>PgBouncer</application>)</simpara>
+        </listitem>
+      </itemizedlist>
+    </para>
+    <para>
+      Following successful script execution, any connections to PgBouncer on the failed BDR node
+      will be redirected to the active node.
+    </para>
+  </sect1>
+
+  <sect1 id="bdr-monitoring-failover" xreflabel="Node monitoring and failover">
+    <title>Node monitoring and failover</title>
+    <para>
+      At the intervals specified by <varname>monitor_interval_secs</varname>
+      in <filename>repmgr.conf</filename>, <application>repmgrd</application>
+      will ping each node to check if it's available. If a node isn't available,
+      <application>repmgrd</application> will enter failover mode and check <varname>reconnect_attempts</varname>
+      times at intervals of <varname>reconnect_interval</varname> to confirm the node is definitely unreachable.
+      This buffer period is necessary to avoid false positives caused by transient
+      network outages.
+    </para>
+    <para>
+      If the node is still unavailable, <application>repmgrd</application> will enter failover mode and execute
+      the script defined in <varname>event_notification_command</varname>; an entry will be logged
+      in the <literal>repmgr.events</literal> table and <application>repmgrd</application> will
+      (unless otherwise configured) resume monitoring of the node in "degraded" mode until it reappears.
+    </para>
+    <para>
+      <application>repmgrd</application> logfile output during a failover event will look something like this
+      on one node (usually the node which has failed, here <literal>node2</literal>):
+      <programlisting>
+            ...
+    [2017-07-27 21:08:39] [INFO] starting continuous BDR node monitoring
+    [2017-07-27 21:08:39] [INFO] monitoring BDR replication status on node "node2" (ID: 2)
+    [2017-07-27 21:08:55] [INFO] monitoring BDR replication status on node "node2" (ID: 2)
+    [2017-07-27 21:09:11] [INFO] monitoring BDR replication status on node "node2" (ID: 2)
+    [2017-07-27 21:09:23] [WARNING] unable to connect to node node2 (ID 2)
+    [2017-07-27 21:09:23] [INFO] checking state of node 2, 0 of 5 attempts
+    [2017-07-27 21:09:23] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:24] [INFO] checking state of node 2, 1 of 5 attempts
+    [2017-07-27 21:09:24] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:25] [INFO] checking state of node 2, 2 of 5 attempts
+    [2017-07-27 21:09:25] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:26] [INFO] checking state of node 2, 3 of 5 attempts
+    [2017-07-27 21:09:26] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:27] [INFO] checking state of node 2, 4 of 5 attempts
+    [2017-07-27 21:09:27] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:28] [WARNING] unable to reconnect to node 2 after 5 attempts
+    [2017-07-27 21:09:28] [NOTICE] setting node record for node 2 to inactive
+    [2017-07-27 21:09:28] [INFO] executing notification command for event "bdr_failover"
+    [2017-07-27 21:09:28] [DETAIL] command is:
+      /path/to/bdr-pgbouncer.sh 2 bdr_failover 1 "host=host=node1 dbname=bdrtest user=repmgr connect_timeout=2" "node1"
+    [2017-07-27 21:09:28] [INFO] node 'node2' (ID: 2) detected as failed; next available node is 'node1' (ID: 1)
+    [2017-07-27 21:09:28] [INFO] monitoring BDR replication status on node "node2" (ID: 2)
+    [2017-07-27 21:09:28] [DETAIL] monitoring node "node2" (ID: 2) in degraded mode
+    ...</programlisting>
+    </para>
+    <para>
+      Output on the other node (<literal>node1</literal>) during the same event will look like this:
+      <programlisting>
+    ...
+    [2017-07-27 21:08:35] [INFO] starting continuous BDR node monitoring
+    [2017-07-27 21:08:35] [INFO] monitoring BDR replication status on node "node1" (ID: 1)
+    [2017-07-27 21:08:51] [INFO] monitoring BDR replication status on node "node1" (ID: 1)
+    [2017-07-27 21:09:07] [INFO] monitoring BDR replication status on node "node1" (ID: 1)
+    [2017-07-27 21:09:23] [WARNING] unable to connect to node node2 (ID 2)
+    [2017-07-27 21:09:23] [INFO] checking state of node 2, 0 of 5 attempts
+    [2017-07-27 21:09:23] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:24] [INFO] checking state of node 2, 1 of 5 attempts
+    [2017-07-27 21:09:24] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:25] [INFO] checking state of node 2, 2 of 5 attempts
+    [2017-07-27 21:09:25] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:26] [INFO] checking state of node 2, 3 of 5 attempts
+    [2017-07-27 21:09:26] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:27] [INFO] checking state of node 2, 4 of 5 attempts
+    [2017-07-27 21:09:27] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-07-27 21:09:28] [WARNING] unable to reconnect to node 2 after 5 attempts
+    [2017-07-27 21:09:28] [NOTICE] other node's repmgrd is handling failover
+    [2017-07-27 21:09:28] [INFO] monitoring BDR replication status on node "node1" (ID: 1)
+    [2017-07-27 21:09:28] [DETAIL] monitoring node "node2" (ID: 2) in degraded mode
+    ...</programlisting>
+    </para>
+    <para>
+      This assumes only the PostgreSQL instance on <literal>node2</literal> has failed. In this case the
+      <application>repmgrd</application> instance running on <literal>node2</literal> has performed the failover. However if
+      the entire server becomes unavailable, <application>repmgrd</application> on <literal>node1</literal> will perform
+      the failover.
+    </para>
+  </sect1>
+  <sect1 id="bdr-node-recovery" xreflabel="Node recovery">
+    <title>Node recovery</title>
+    <para>
+      Following failure of a BDR node, if the node subsequently becomes available again,
+      a <varname>bdr_recovery</varname> event will be generated. This could potentially be used to
+      reconfigure PgBouncer automatically to bring the node back into the available pool,
+      however it would be prudent to manually verify the node's status before
+      exposing it to the application.
+    </para>
+    <para>
+      If the failed node comes back up and connects correctly, output similar to this
+      will be visible in the <application>repmgrd</application> log:
+      <programlisting>
+        [2017-07-27 21:25:30] [DETAIL] monitoring node "node2" (ID: 2) in degraded mode
+        [2017-07-27 21:25:46] [INFO] monitoring BDR replication status on node "node2" (ID: 2)
+        [2017-07-27 21:25:46] [DETAIL] monitoring node "node2" (ID: 2) in degraded mode
+        [2017-07-27 21:25:55] [INFO] active replication slot for node "node1" found after 1 seconds
+        [2017-07-27 21:25:55] [NOTICE] node "node2" (ID: 2) has recovered after 986 seconds</programlisting>
+    </para>
+  </sect1>
+
+  <sect1 id="bdr-complete-shutdown" xreflabel="Shutdown of both nodes">
+    <title>Shutdown of both nodes</title>
+    <para>
+      If both PostgreSQL instances are shut down, <application>repmgrd</application> will try and handle the
+      situation as gracefully as possible, though with no failover candidates available
+      there's not much it can do. Should this case ever occur, we recommend shutting
+      down <application>repmgrd</application> on both nodes and restarting it once the PostgreSQL instances
+      are running properly.
+    </para>
+  </sect1>
+</chapter>
+
--- a/doc/repmgrd-configuration.sgml
+++ b/doc/repmgrd-configuration.sgml
@@ -1,33 +1,29 @@
 <chapter id="repmgrd-configuration">

-  <title>repmgrd setup and configuration</title>
-
  <indexterm>
    <primary>repmgrd</primary>
    <secondary>configuration</secondary>
  </indexterm>

+  <title>repmgrd setup and configuration</title>
+
  <para>
-    &repmgrd; is a daemon process which runs on each PostgreSQL node,
+    <application>repmgrd</application> is a daemon which runs on each PostgreSQL node,
    monitoring the local node, and (unless it's the primary node) the upstream server
    (the primary server or with cascading replication, another standby) which it's
    connected to.
  </para>
  <para>
-    &repmgrd; can be configured to provide failover
-    capability in case the primary or upstream node becomes unreachable, and/or
+    <application>repmgrd</application> can be configured to provide failover
+    capability in case the primary upstream node becomes unreachable, and/or
    provide monitoring data to the &repmgr; metadatabase.
  </para>
-  <para>
-    From &repmgr; 4.4, when running on the primary node, &repmgrd; can also monitor
-    standby disconnections/reconnections (see <xref linkend="repmgrd-primary-child-disconnection"/>).
-  </para>

  <sect1 id="repmgrd-basic-configuration">
    <title>repmgrd configuration</title>

    <para>
-      To use &repmgrd;, its associated function library <emphasis>must</emphasis> be
+      To use <application>repmgrd</application>, its associated function library <emphasis>must</emphasis> be
      included via <filename>postgresql.conf</filename> with:

      <programlisting>
@@ -39,131 +35,124 @@
    </para>

    <para>
-      The following configuraton options apply to &repmgrd; in all circumstances:
+      The following configuraton options apply to <application>repmgrd</application> in all circumstances:
    </para>
    <variablelist>

-      <varlistentry>
-        <term><option>monitor_interval_secs</option></term>
-        <listitem>
-          <indexterm>
+        <varlistentry>
+
+         <indexterm>
            <primary>monitor_interval_secs</primary>
          </indexterm>
+          <term><option>monitor_interval_secs</option></term>
+          <listitem>
+            <para>
+              The interval (in seconds, default: <literal>2</literal>) to check the availability of the upstream node.
+            </para>
+          </listitem>

-          <para>
-            The interval (in seconds, default: <literal>2</literal>) to check the availability of the upstream node.
-          </para>
-        </listitem>
+        </varlistentry>

-      </varlistentry>
+        <varlistentry>

-      <varlistentry id="connection-check-type">
-
-        <term><option>connection_check_type</option></term>
-        <listitem>
          <indexterm>
            <primary>connection_check_type</primary>
          </indexterm>
-
-          <para>
-            The option <option>connection_check_type</option> is used to select the method
-            &repmgrd; uses to determine whether the upstream node is available.
-          </para>
-          <para>
-            Possible values are:
-            <itemizedlist spacing="compact" mark="bullet">
-              <listitem>
+          <term><option>connection_check_type</option></term>
+          <listitem>
+            <para>
+              The option <option>connection_check_type</option> is used to select the method
+              <application>repmgrd</application> uses to determine whether the upstream node is available.
+            </para>
+            <para>
+              Possible values are:
+              <itemizedlist spacing="compact" mark="bullet">
+                <listitem>
                  <simpara>
                    <literal>ping</literal> (default) - uses <command>PQping()</command> to
                    determine server availability
                  </simpara>
-              </listitem>
-              <listitem>
-                <simpara>
-                  <literal>connection</literal> - determines server availability
-                  by attempting to make a new connection to the upstream node
-                </simpara>
-              </listitem>
-              <listitem>
-                <simpara>
-                  <literal>query</literal> - determines server availability
-                  by executing an SQL statement on the node via the existing connection
-                </simpara>
-                <simpara>
-                  The query is a minimal throwaway query - <command>SELECT 1</command> -
-                  which is used to determine that the server can accept queries.
-                </simpara>
-              </listitem>
+                </listitem>
+                <listitem>
+                  <simpara>
+                    <literal>connection</literal> - determines server availability
+                    by attempt ingto make a new connection to the upstream node
+                  </simpara>
+                </listitem>
+                <listitem>
+                  <simpara>
+                    <literal>query</literal> - determines server availability
+                    by executing an SQL statement on the node via the existing connection
+                  </simpara>
+                </listitem>

-            </itemizedlist>
-          </para>
-        </listitem>
-      </varlistentry>
+              </itemizedlist>
+            </para>
+          </listitem>
+        </varlistentry>

-      <varlistentry>
-        <term><option>reconnect_attempts</option></term>
-        <listitem>
-          <indexterm>
+        <varlistentry>
+         <indexterm>
            <primary>reconnect_attempts</primary>
          </indexterm>
-          <para>
-            The number of attempts (default: <literal>6</literal>) will be made to reconnect to an unreachable
-	        upstream node before initiating a failover.
-          </para>
-          <para>
-            There will be an interval of <option>reconnect_interval</option> seconds between each reconnection
-            attempt.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><option>reconnect_interval</option></term>
-
-        <listitem>
-          <indexterm>
+          <term><option>reconnect_attempts</option></term>
+          <listitem>
+            <para>
+              The number of attempts (default: <literal>6</literal>) will be made to reconnect to an unreachable
+	      upstream node before initiating a failover.
+            </para>
+            <para>
+              There will be an interval of <option>reconnect_interval</option> seconds between each reconnection
+              attempt.
+            </para>
+          </listitem>
+        </varlistentry>
+        <varlistentry>
+         <indexterm>
            <primary>reconnect_interval</primary>
          </indexterm>
-
-          <para>
-            Interval (in seconds, default: <literal>10</literal>) between attempts to reconnect to an unreachable
-            upstream node.
-          </para>
-          <para>
+          <term><option>reconnect_interval</option></term>
+          <listitem>
+            <para>
+              Interval (in seconds, default: <literal>10</literal>) between attempts to reconnect to an unreachable
+              upstream node.
+            </para>
+            <para>
              The number of reconnection attempts is defined by the parameter <option>reconnect_attempts</option>.
-          </para>
-        </listitem>
-      </varlistentry>
+            </para>
+          </listitem>
+        </varlistentry>

-      <varlistentry>
-        <term><option>degraded_monitoring_timeout</option></term>
-        <listitem>
+
+
+        <varlistentry>
          <indexterm>
            <primary>degraded_monitoring_timeout</primary>
          </indexterm>
-
-	      <para>
-            Interval (in seconds) after which &repmgrd; will terminate if
-            either of the servers (local node and or upstream node) being monitored is no longer available
-            (<link linkend="repmgrd-degraded-monitoring">degraded monitoring mode</link>).
-          </para>
-          <para>
-            <literal>-1</literal> (default) disables this timeout completely.
-          </para>
-	    </listitem>
-	  </varlistentry>
+          <term><option>degraded_monitoring_timeout</option></term>
+          <listitem>
+	    <para>
+              Interval (in seconds) after which <application>repmgrd</application> will terminate if
+              either of the servers (local node and or upstream node) being monitored is no longer available
+              (<link linkend="repmgrd-degraded-monitoring">degraded monitoring mode</link>).
+            </para>
+            <para>
+              <literal>-1</literal> (default) disables this timeout completely.
+            </para>
+	  </listitem>
+	</varlistentry>

    </variablelist>

      <para>
-        See also <filename><ulink url="https://raw.githubusercontent.com/EnterpriseDB/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink></filename> for an annotated sample configuration file.
+        See also <filename><ulink url="https://raw.githubusercontent.com/2ndQuadrant/repmgr/master/repmgr.conf.sample">repmgr.conf.sample</ulink></filename> for an annotated sample configuration file.
      </para>

    <sect2 id="repmgrd-automatic-failover-configuration">
      <title>Required configuration for automatic failover</title>

      <para>
-        The following &repmgrd; options <emphasis>must</emphasis> be set in
+        The following <application>repmgrd</application> options <emphasis>must</emphasis> be set in
        <filename>repmgr.conf</filename>:

        <itemizedlist spacing="compact" mark="bullet">
@@ -193,18 +182,17 @@
      <variablelist>
        <varlistentry>

+          <indexterm>
+            <primary>failover</primary>
+          </indexterm>
          <term><option>failover</option></term>
          <listitem>
-            <indexterm>
-              <primary>failover</primary>
-            </indexterm>
-
            <para>
              <option>failover</option> can be one of <literal>automatic</literal> or <literal>manual</literal>.
            </para>
            <note>
              <para>
-                If <option>failover</option> is set to <literal>manual</literal>, &repmgrd;
+                If <option>failover</option> is set to <literal>manual</literal>, <application>repmgrd</application>
                will not take any action if a failover situation is detected, and the node may need to
                be modified manually (e.g. by executing <command><link linkend="repmgr-standby-follow">repmgr standby follow</link></command>).
              </para>
@@ -214,35 +202,22 @@
        </varlistentry>

        <varlistentry>
+          <indexterm>
+            <primary>promote_command</primary>
+          </indexterm>
          <term><option>promote_command</option></term>
-
          <listitem>
-            <indexterm>
-              <primary>promote_command</primary>
-            </indexterm>
-
            <para>
              The program or script defined in <option>promote_command</option> will be executed
-              in a failover situation when &repmgrd; determines that
+              in a failover situation when <application>repmgrd</application> determines that
              the current node is to become the new primary node.
            </para>
            <para>
              Normally <option>promote_command</option> is set as &repmgr;'s
              <command><link linkend="repmgr-standby-promote">repmgr standby promote</link></command> command.
            </para>
-
-            <note>
-              <para>
-                When invoking <command>repmgr standby promote</command> (either directly via
-                the <option>promote_command</option>, or in a script called
-                via <option>promote_command</option>), <option>--siblings-follow</option>
-                <emphasis>must not</emphasis> be included as a
-                command line option for <command>repmgr standby promote</command>.
-              </para>
-            </note>
-
            <para>
-              It is also possible to provide a shell script to e.g. perform user-defined tasks
+              It is also possible to provide e.g. a shell script to e.g. perform user-defined tasks
              before promoting the current node. In this case the script <emphasis>must</emphasis>
              at some point execute <command><link linkend="repmgr-standby-promote">repmgr standby promote</link></command>
              to promote the node; if this is not done, &repmgr; metadata will not be updated and
@@ -256,8 +231,8 @@

            <para>
              Note that the <literal>--log-to-file</literal> option will cause
-              output generated by the &repmgr; command, when executed by &repmgrd;,
-              to be logged to the same destination configured to receive log output for &repmgrd;.
+              output generated by the &repmgr; command, when executed by <application>repmgrd</application>,
+              to be logged to the same destination configured to receive log output for <application>repmgrd</application>.
            </para>
            <note>
              <para>
@@ -270,33 +245,32 @@
        </varlistentry>

        <varlistentry>
+          <indexterm>
+            <primary>follow_command</primary>
+          </indexterm>
          <term><option>follow_command</option></term>
          <listitem>
-            <indexterm>
-              <primary>follow_command</primary>
-            </indexterm>
-
            <para>
              The program or script defined in <option>follow_command</option> will be executed
-              in a failover situation when &repmgrd; determines that
+              in a failover situation when <application>repmgrd</application> determines that
              the current node is to follow the new primary node.
            </para>
            <para>
              Normally <option>follow_command</option> is set as &repmgr;'s
-              <command><link linkend="repmgr-standby-follow">repmgr standby follow</link></command> command.
+              <command><link linkend="repmgr-standby-follow">repmgr standby promote</link></command> command.
            </para>
            <para>
              The <option>follow_command</option> parameter
              should provide the <literal>--upstream-node-id=%n</literal>
              option to <command>repmgr standby follow</command>; the <literal>%n</literal> will be replaced by
-              &repmgrd; with the ID of the new primary node. If this is not provided,
+              <application>repmgrd</application> with the ID of the new primary node. If this is not provided,
              <command>repmgr standby follow</command> will attempt to determine the new primary by itself, but if the
              original primary comes back online after the new primary is promoted, there is a risk that
              <command>repmgr standby follow</command> will result in the node continuing to follow
              the original primary.
            </para>
            <para>
-              It is also possible to provide a shell script to e.g. perform user-defined tasks
+              It is also possible to provide e.g. a shell script to e.g. perform user-defined tasks
              before promoting the current node. In this case the script <emphasis>must</emphasis>
              at some point execute <command><link linkend="repmgr-standby-follow">repmgr standby follow</link></command>
              to promote the node; if this is not done, &repmgr; metadata will not be updated and
@@ -310,8 +284,8 @@

            <para>
              Note that the <literal>--log-to-file</literal> option will cause
-              output generated by the &repmgr; command, when executed by &repmgrd;,
-              to be logged to the same destination configured to receive log output for &repmgrd;.
+              output generated by the &repmgr; command, when executed by <application>repmgrd</application>,
+              to be logged to the same destination configured to receive log output for <application>repmgrd</application>.
            </para>
            <note>
              <para>
@@ -329,47 +303,41 @@

    </sect2>

-    <sect2 id="repmgrd-automatic-failover-configuration-optional" xreflabel="Optional configuration for automatic failover">
+    <sect2 id="repmgrd-automatic-failover-configuration-optional">
      <title>Optional configuration for automatic failover</title>

      <para>
-        The following configuraton options can be used to fine-tune automatic failover:
+        The following configuraton options can be use to fine-tune automatic failover:
      </para>
      <variablelist>

        <varlistentry>
+          <indexterm>
+            <primary>priority</primary>
+          </indexterm>
          <term><option>priority</option></term>
          <listitem>
-            <indexterm>
-              <primary>priority</primary>
-            </indexterm>
-
            <para>
-              Indicates a preferred priority (default: <literal>100</literal>) for promoting nodes.
+              Indicates a preferred priority (default: <literal>100</literal>) for promoting nodes;
+			  a value of zero prevents the node being promoted to primary.
            </para>
            <para>
              Note that the priority setting is only applied if two or more nodes are
              determined as promotion candidates; in that case the node with the
              higher priority is selected.
            </para>
-            <para>
-              A value of zero will always prevent the node being promoted to primary, even if there
-              is no other promotion candidate.
-            </para>
-
          </listitem>
        </varlistentry>

        <varlistentry>
+          <indexterm>
+            <primary>failover_validation_command</primary>
+          </indexterm>
          <term><option>failover_validation_command</option></term>
          <listitem>
-            <indexterm>
-              <primary>failover_validation_command</primary>
-            </indexterm>
-
            <para>
              User-defined script to execute for an external mechanism to validate the failover
-	      decision made by &repmgrd;.
+	      decision made by <application>repmgrd</application>.
            </para>
            <note>
              <para>
@@ -378,8 +346,8 @@
              </para>
            </note>
            <para>
-              One or more of the following parameter placeholders
-			  may be provided, which will be replaced by repmgrd with the appropriate
+              One or both of the following parameter placeholders
+			  should be provided, which will be replaced by repmgrd with the appropriate
 	          value:
              <itemizedlist spacing="compact" mark="bullet">
                <listitem>
@@ -388,15 +356,6 @@
                <listitem>
                  <simpara><literal>%a</literal>: node name</simpara>
                </listitem>
-                <listitem>
-                  <simpara><literal>%v</literal>: number of visible nodes</simpara>
-                </listitem>
-                <listitem>
-                  <simpara><literal>%u</literal>: number of shared upstream nodes</simpara>
-                </listitem>
-                <listitem>
-                  <simpara><literal>%t</literal>: total number of nodes</simpara>
-                </listitem>
              </itemizedlist>
            </para>
            <para>
@@ -407,16 +366,15 @@


        <varlistentry>
+
+         <indexterm>
+            <primary>primary_visibility_consensus</primary>
+          </indexterm>
          <term><option>primary_visibility_consensus</option></term>
-
          <listitem>
-            <indexterm>
-              <primary>primary_visibility_consensus</primary>
-            </indexterm>
-
            <para>
-              If <literal>true</literal>, only continue with failover if no standbys
-              (or the witness server, if present) have seen the primary node recently.
+              If <literal>true</literal>, only continue with failover if no standbys have seen
+			  the primary node recently.
            </para>
            <note>
              <para>
@@ -427,41 +385,13 @@
          </listitem>
        </varlistentry>

-        <varlistentry>
-          <term><option>always_promote</option></term>
-
-          <listitem>
-            <indexterm>
-              <primary>always_promote</primary>
-            </indexterm>
-
-            <para>
-              Default: <literal>false</literal>.
-            </para>
-            <para>
-              If <literal>true</literal>, promote the local node even if its
-              &repmgr; metadata is not up-to-date.
-            </para>
-            <para>
-              Normally &repmgr; expects its metadata (stored in the <varname>repmgr.nodes</varname>
-              table) to be up-to-date so &repmgrd; can take the correct action during a failover.
-              However it's possible that updates made on the primary may not
-              have propagated to the standby (promotion candidate). In this case &repmgrd; will
-              default to not promoting the standby. This behaviour can be overridden by setting
-              <option>always_promote</option> to <literal>true</literal>.
-            </para>
-          </listitem>
-        </varlistentry>
-
-
        <varlistentry>

+         <indexterm>
+            <primary>standby_disconnect_on_failover</primary>
+          </indexterm>
          <term><option>standby_disconnect_on_failover</option></term>
          <listitem>
-            <indexterm>
-              <primary>standby_disconnect_on_failover</primary>
-            </indexterm>
-
            <para>
              In a failover situation, disconnect the local node's WAL receiver.
            </para>
@@ -478,7 +408,7 @@
                for this option.
              </para>
              <para>
-                &repmgrd; will refuse to start if this option is set
+                <application>repmgrd</application> will refuse to start if this option is set
                but either of these prerequisites is not met.
              </para>
            </note>
@@ -489,32 +419,6 @@
          </listitem>
        </varlistentry>

-        <varlistentry>
-
-          <term><option>repmgrd_exit_on_inactive_node</option></term>
-          <listitem>
-            <indexterm>
-              <primary>repmgrd_exit_on_inactive_node</primary>
-            </indexterm>
-            <para>
-              This parameter is available in &repmgr; 5.3 and later.
-            </para>
-            <para>
-              If a node was marked as inactive but is running, and this option is set to
-              <literal>true</literal>, &repmgrd; will abort on startup.
-            </para>
-            <para>
-              By default, <option>repmgrd_exit_on_inactive_node</option> is set
-              to <literal>false</literal>, in which case &repmgrd; will set the
-              node record to active on startup.
-            </para>
-            <para>
-              Setting this parameter to <literal>true</literal> causes &repmgrd;
-              to behave in the same way it did in &repmgr; 5.2 and earlier.
-            </para>
-          </listitem>
-        </varlistentry>
-
      </variablelist>

      <para>
@@ -525,12 +429,11 @@
      <variablelist>

        <varlistentry>
+          <indexterm>
+            <primary>election_rerun_interval</primary>
+          </indexterm>
          <term><option>election_rerun_interval</option></term>
          <listitem>
-            <indexterm>
-              <primary>election_rerun_interval</primary>
-            </indexterm>
-
 			<para>
 			  If <option>failover_validation_command</option> is set, and the command returns
 			  an error, pause the specified amount of seconds (default: 15) before rerunning the election.
@@ -540,12 +443,11 @@


        <varlistentry>
+          <indexterm>
+            <primary>sibling_nodes_disconnect_timeout</primary>
+          </indexterm>
          <term><option>sibling_nodes_disconnect_timeout</option></term>
          <listitem>
-            <indexterm>
-              <primary>sibling_nodes_disconnect_timeout</primary>
-            </indexterm>
-
 			<para>
              If <option>standby_disconnect_on_failover</option> is <literal>true</literal>, the
              maximum length of time (in seconds, default: <literal>30</literal>)
@@ -560,58 +462,38 @@

    </sect2>

-
-    <sect2 id="repmgrd-automatic-failover-configuration-pgbouncer-fencing">
-      <title>Configuring &repmgrd; and pgbouncer to fence a failed primary node</title>
-      <indexterm>
-        <primary>fencing</primary>
-        <secondary>using repmgrd and pgbouncer to fence a failed primary node</secondary>
-      </indexterm>
-      <indexterm>
-        <primary>PgBouncer</primary>
-        <secondary>using repmgrd and pgbouncer to fence a failed primary node</secondary>
-      </indexterm>
-      <para>
-        For further details and a reference implementation, see the separate document
-        <ulink url="https://github.com/EnterpriseDB/repmgr/blob/master/doc/repmgrd-node-fencing.md">Fencing a failed master node with repmgrd and PgBouncer</ulink>.
-      </para>
-    </sect2>
-
    <sect2 id="postgresql-service-configuration">
-      <title>PostgreSQL service configuration</title>
-
      <indexterm>
        <primary>repmgrd</primary>
        <secondary>PostgreSQL service configuration</secondary>
      </indexterm>
+      <title>PostgreSQL service configuration</title>
      <para>
-        If using automatic failover, currently &repmgrd; will need to execute
+        If using automatic failover, currently <application>repmgrd</application> will need to execute
        <link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>
        to restart PostgreSQL on standbys to have them follow a new primary.
      </para>
      <para>
        To ensure this happens smoothly, it's essential to provide the appropriate system/service restart
        command appropriate to your operating system via <varname>service_restart_command</varname>
-        in <filename>repmgr.conf</filename>. If you don't do this, &repmgrd;
+        in <filename>repmgr.conf</filename>. If you don't do this, <application>repmgrd</application>
        will default to using <command>pg_ctl</command>, which can result in unexpected problems,
        particularly on <application>systemd</application>-based systems.
      </para>
      <para>
-        For more details, see <xref linkend="configuration-file-service-commands"/>.
+        For more details, see <xref linkend="configuration-file-service-commands">.
      </para>
    </sect2>

    <sect2 id="repmgrd-service-configuration">
-      <title>repmgrd service configuration</title>
-
      <indexterm>
        <primary>repmgrd</primary>
        <secondary>repmgrd service configuration</secondary>
      </indexterm>
+      <title>repmgrd service configuration</title>
      <para>
        If you are intending to use the <link linkend="repmgr-daemon-start"><command>repmgr daemon start</command></link>
-        and <link linkend="repmgr-daemon-stop"><command>repmgr daemon stop</command></link>
-        commands, the following
+        and <link linkend="repmgr-daemon-stop"><command>repmgr daemon stop</command></link> commands, the following
        parameters <emphasis>must</emphasis> be set in <filename>repmgr.conf</filename>:
        <itemizedlist spacing="compact" mark="bullet">

@@ -627,10 +509,10 @@

      </para>
      <para>
-        Example (for &repmgr; with PostgreSQL 12 on CentOS 7):
+        Example (for &repmgr; with PostgreSQL 11 on CentOS 7):
        <programlisting>
-repmgrd_service_start_command='sudo systemctl repmgr12 start'
-repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
+repmgrd_service_start_command='sudo systemctl repmgr11 start'
+repmgrd_service_stop_command='sudo systemctl repmgr11 stop'
 </programlisting>
      </para>
      <para>
@@ -640,12 +522,11 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'


    <sect2 id="repmgrd-monitoring-configuration" xreflabel="repmgrd monitoring configuration">
-      <title>Monitoring configuration</title>
-
      <indexterm>
        <primary>repmgrd</primary>
        <secondary>monitoring configuration</secondary>
      </indexterm>
+      <title>Monitoring configuration</title>
      <para>
        To enable monitoring, set:
        <programlisting>
@@ -657,34 +538,32 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
        the option <option>monitor_interval_secs</option> (see above).
      </para>
      <para>
-        For more details on monitoring, see <xref linkend="repmgrd-monitoring"/>. For information on
-        monitoring standby disconnections, see <xref linkend="repmgrd-primary-child-disconnection"/>.
+        For more details on monitoring, see <xref linkend="repmgrd-monitoring">.
      </para>
    </sect2>

-    <sect2 id="repmgrd-reloading-configuration" xreflabel="reloading repmgrd configuration">
-      <title>Applying configuration changes to repmgrd</title>
-
+    <sect2 id="repmgrd-reloading-configuration"xreflabel="reloading repmgrd configuration">
      <indexterm>
        <primary>repmgrd</primary>
        <secondary>applying configuration changes</secondary>
      </indexterm>
+      <title>Applying configuration changes to repmgrd</title>
      <para>
-        To apply configuration file changes to a running &repmgrd;
-        daemon, execute the operating system's &repmgrd; service reload command
-        (see <xref linkend="appendix-packages"/> for examples),
+        To apply configuration file changes to a running <application>repmgrd</application>
+        daemon, execute the operating system's <application>repmgrd</application> service reload command
+        (see <xref linkend="appendix-packages"> for examples),
          or for instances  which were manually started, execute <command>kill -HUP</command>, e.g.
          <command>kill -HUP `cat /tmp/repmgrd.pid`</command>.
      </para>
      <tip>
        <para>
-          Check the &repmgrd; log to see what changes were
+          Check the <application>repmgrd</application> log to see what changes were
          applied, or if any issues were encountered when reloading the configuration.
        </para>
      </tip>
      <para>
        Note that only the following subset of configuration file parameters can be changed on a
-        running &repmgrd; daemon:
+        running <application>repmgrd</application> daemon:
      </para>
      <itemizedlist spacing="compact" mark="bullet">

@@ -694,41 +573,18 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
          </simpara>
        </listitem>

-         <listitem>
+        <listitem>
          <simpara>
-            <varname>child_nodes_check_interval</varname>
+            <varname>bdr_local_monitoring_only</varname>
          </simpara>
        </listitem>

        <listitem>
          <simpara>
-            <varname>child_nodes_connected_include_witness</varname>
+            <varname>bdr_recovery_timeout</varname>
          </simpara>
        </listitem>

-        <listitem>
-          <simpara>
-            <varname>child_nodes_connected_min_count</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>child_nodes_disconnect_command</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>child_nodes_disconnect_min_count</varname>
-          </simpara>
-        </listitem>
-
-        <listitem>
-          <simpara>
-            <varname>child_nodes_disconnect_timeout</varname>
-          </simpara>
-        </listitem>

        <listitem>
          <simpara>
@@ -826,12 +682,6 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
          </simpara>
        </listitem>

-        <listitem>
-          <simpara>
-            <varname>always_promote</varname>
-          </simpara>
-        </listitem>
-
        <listitem>
          <simpara>
            <varname>promote_command</varname>
@@ -920,7 +770,7 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
      <note>
        <para>
          After executing <command><link linkend="repmgr-standby-register">repmgr standby register --force</link></command>,
-          &repmgrd; <emphasis>must</emphasis> be restarted for the changes to take effect.
+          <application>repmgrd</application> <emphasis>must</emphasis> be restarted for the changes to take effect.
        </para>
      </note>

@@ -929,25 +779,24 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
  </sect1>

  <sect1 id="repmgrd-daemon" xreflabel="repmgrd daemon">
-    <title>repmgrd daemon</title>
-
    <indexterm>
      <primary>repmgrd</primary>
      <secondary>starting and stopping</secondary>
    </indexterm>
+    <title>repmgrd daemon</title>
    <para>
-      If installed from a package, the &repmgrd; can be started
+      If installed from a package, the <application>repmgrd</application> can be started
      via the operating system's service command, e.g. in <application>systemd</application>
      using <command>systemctl</command>.
    </para>
    <para>
-      See appendix <xref linkend="appendix-packages"/> for details of service commands
+      See appendix <xref linkend="appendix-packages"> for details of service commands
      for different distributions.
    </para>
    <para>
      The commands <link linkend="repmgr-daemon-start"><command>repmgr daemon start</command></link> and
      <link linkend="repmgr-daemon-stop"><command>repmgr daemon stop</command></link> can be used
-      as convenience wrappers to start and stop &repmgrd; on the local node.
+      as convenience wrappers to start and stop <application>repmgrd</application>.
    </para>
    <important>
      <para>
@@ -959,15 +808,13 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
      </para>
    </important>
    <para>
-      &repmgrd; can be started manually like this:
+      <application>repmgrd</application> can be started manually like this:
      <programlisting>
        repmgrd -f /etc/repmgr.conf --pid-file /tmp/repmgrd.pid</programlisting>
      and stopped with <command>kill `cat /tmp/repmgrd.pid`</command>. Adjust paths as appropriate.
    </para>

    <sect2 id="repmgrd-pid-file" xreflabel="repmgrd's PID file">
-      <title>repmgrd's PID file</title>
-
      <indexterm>
        <primary>repmgrd</primary>
        <secondary>PID file</secondary>
@@ -976,8 +823,9 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
        <primary>PID file</primary>
        <secondary>repmgrd</secondary>
      </indexterm>
+      <title>repmgrd's PID file</title>
      <para>
-        &repmgrd; will generate a PID file by default.
+        <application>repmgrd</application> will generate a PID file by default.
      </para>
      <note>
        <simpara>
@@ -997,13 +845,13 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
        <option>--pid-file</option> may be deprecated in future releases.
      </para>
      <para>
-        If a PID file location was specified by the package maintainer, &repmgrd;
+        If a PID file location was specified by the package maintainer, <application>repmgrd</application>
        will use that. This only applies if &repmgr; was installed from a package and the package
        maintainer has specified the PID file location.
      </para>
      <para>
-        If none of the above apply, &repmgrd; will create a PID file
-        in the operating system's temporary directory (as determined by the environment variable
+        If none of the above apply, <application>repmgrd</application> will create a PID file
+        in the operating system's temporary directory (as setermined by the environment variable
        <varname>TMPDIR</varname>, or if that is not set, will use <filename>/tmp</filename>).
      </para>
      <para>
@@ -1011,17 +859,15 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
        <option>--no-pid-file</option>.
      </para>
      <para>
-        To see which PID file &repmgrd; would use, execute &repmgrd;
-        with the option <option>--show-pid-file</option>. &repmgrd;
+        To see which PID file <application>repmgrd</application> would use, execute <application>repmgrd</application>
+        with the option <option>--show-pid-file</option>. <application>repmgrd</application>
        will not start if this option is provided. Note that the value shown is the
-        file  &repmgrd; would use next time it starts, and is
+        file  <application>repmgrd</application> would use next time it starts, and is
        not necessarily the PID file currently in use.
      </para>
    </sect2>

    <sect2 id="repmgrd-configuration-debian-ubuntu">
-      <title>repmgrd daemon configuration on Debian/Ubuntu</title>
-
      <indexterm>
        <primary>repmgrd</primary>
        <secondary>Debian/Ubuntu and daemon configuration</secondary>
@@ -1031,9 +877,11 @@ repmgrd_service_stop_command='sudo systemctl repmgr12 stop'
        <secondary>repmgrd daemon configuration</secondary>
      </indexterm>

+      <title>repmgrd daemon configuration on Debian/Ubuntu</title>
+
      <para>
        If &repmgr; was installed from Debian/Ubuntu packages, additional configuration
-        is required before &repmgrd; is started as a daemon.
+        is required before <application>repmgrd</application> is started as a daemon.
      </para>
      <para>
        This is done via the file <filename>/etc/default/repmgrd</filename>, which by default
@@ -1067,45 +915,22 @@ REPMGRD_OPTS="--daemonize=false"
      </para>
      <tip>
        <para>
-          See <xref linkend="packages-debian-ubuntu"/> for details of the Debian/Ubuntu packages and
+          See <xref linkend="packages-debian-ubuntu"> for details of the Debian/Ubuntu packages and
          typical file locations (including <filename>repmgr.conf</filename>).
        </para>
      </tip>
      <para>
-        From &repmgrd; 4.1, ensure <varname>REPMGRD_OPTS</varname> includes
+        From <application>repmgrd</application> 4.1, ensure <varname>REPMGRD_OPTS</varname> includes
        <option>--daemonize=false</option>, as daemonization is handled by the service command.
      </para>
      <para>
        If using <application>systemd</application>, you may need to execute <command>systemctl daemon-reload</command>.
-        Also, if you attempted to start &repmgrd; using <command>systemctl start repmgrd</command>,
+        Also, if you attempted to start <application>repmgrd</application> using <command>systemctl start repmgrd</command>,
        you'll need to execute <command>systemctl stop repmgrd</command>. Because that's how <application>systemd</application>
        rolls.
      </para>

    </sect2>
-
-    <sect2 id="repmgrd-daemon-monitoring">
-      <title>repmgrd daemon monitoring</title>
-      <indexterm>
-        <primary>repmgrd</primary>
-        <secondary>monitoring</secondary>
-      </indexterm>
-      <indexterm>
-        <primary>monitoring</primary>
-        <secondary>repmgrd</secondary>
-      </indexterm>
-
-      <para>
-        The command <command><link linkend="repmgr-service-status">repmgr service status</link></command>
-        provides an overview of the &repmgrd; daemon status (including pause status)
-        on all nodes in the cluster.
-      </para>
-      <para>
-        From &repmgr; 5.3, <command><link linkend="repmgr-node-check">repmgr node check --repmgrd</link></command>
-        can be used to check the status of &repmgrd; (including pause status)
-        on the local node.
-      </para>
-    </sect2>
  </sect1>

  <sect1 id="repmgrd-connection-settings">
@@ -1134,9 +959,7 @@ REPMGRD_OPTS="--daemonize=false"



-  <sect1 id="repmgrd-log-rotation">
-     <title>repmgrd log rotation</title>
-
+ <sect1 id="repmgrd-log-rotation">
   <indexterm>
     <primary>log rotation</primary>
     <secondary>repmgrd</secondary>
@@ -1147,8 +970,9 @@ REPMGRD_OPTS="--daemonize=false"
     <secondary>log rotation</secondary>
   </indexterm>

+  <title>repmgrd log rotation</title>
  <para>
-   To ensure the current &repmgrd; logfile
+   To ensure the current <application>repmgrd</application> logfile
   (specified in <filename>repmgr.conf</filename> with the parameter
   <option>log_file</option>) does not grow indefinitely, configure your
   system's <command>logrotate</command> to regularly rotate it.
--- a/doc/repmgrd-node-fencing.md
+++ b/doc/repmgrd-node-fencing.md
@@ -108,7 +108,7 @@ The actual script is as follows; adjust the configurable items as appropriate:

    # 1. Promote this node from standby to primary

-    repmgr standby promote -f /etc/repmgr.conf --log-to-file
+    repmgr standby promote -f /etc/repmgr.conf

    # 2. Reconfigure pgbouncer instances

@@ -146,7 +146,7 @@ Script and template file should be installed on each node where `repmgrd` is run
 Finally, set `promote_command` in `repmgr.conf` on each node to
 point to the custom promote script:

-    promote_command='/var/lib/postgres/repmgr/promote.sh'
+    promote_command=/var/lib/postgres/repmgr/promote.sh

 and reload/restart any running `repmgrd` instances for the changes to take
 effect.
--- a/doc/repmgrd-operation.sgml
+++ b/doc/repmgrd-operation.sgml
@@ -1,14 +1,13 @@
 <chapter id="repmgrd-operation" xreflabel="repmgrd operation">
-  <title>repmgrd operation</title>
-
  <indexterm>
    <primary>repmgrd</primary>
    <secondary>operation</secondary>
  </indexterm>

-  <sect1 id="repmgrd-pausing" xreflabel="pausing the repmgrd service">
+  <title>repmgrd operation</title>

-    <title>Pausing the repmgrd service</title>
+
+  <sect1 id="repmgrd-pausing">

  <indexterm>
    <primary>repmgrd</primary>
@@ -19,44 +18,45 @@
    <primary>pausing repmgrd</primary>
  </indexterm>

+  <title>Pausing repmgrd</title>

  <para>
-    In normal operation, &repmgrd; monitors the state of the
+    In normal operation, <application>repmgrd</application> monitors the state of the
    PostgreSQL node it is running on, and will take appropriate action if problems
    are detected, e.g. (if so configured) promote the node to primary, if the existing
    primary has been determined as failed.
  </para>

  <para>
-    However, &repmgrd; is unable to distinguish between
+    However, <application>repmgrd</application> is unable to distinguish between
    planned outages (such as performing a <link linkend="performing-switchover">switchover</link>
    or installing PostgreSQL maintenance released), and an actual server outage. In versions prior to
-    &repmgr; 4.2 it was necessary to stop &repmgrd; on all nodes (or at least
-    on all nodes where &repmgrd; is
+    &repmgr; 4.2 it was necessary to stop <application>repmgrd</application> on all nodes (or at least
+    on all nodes where <application>repmgrd</application> is
    <link linkend="repmgrd-automatic-failover">configured for automatic failover</link>)
-    to prevent &repmgrd; from making unintentional changes to the
+    to prevent <application>repmgrd</application> from making unintentional changes to the
    replication cluster.
  </para>

  <para>
-    From <link linkend="release-4.2">&repmgr; 4.2</link>, &repmgrd;
+    From <link linkend="release-4.2">&repmgr; 4.2</link>, <application>repmgrd</application>
    can now be &quot;paused&quot;, i.e. instructed not to take any action such as performing a failover.
    This can be done from any node in the cluster, removing the need to stop/restart
-    each &repmgrd; individually.
+    each <application>repmgrd</application> individually.
  </para>

  <note>
    <para>
-      For major PostgreSQL upgrades, e.g. from PostgreSQL 11 to PostgreSQL 12,
-      &repmgrd; should be shut down completely and only started up
+      For major PostgreSQL upgrades, e.g. from PostgreSQL 10 to PostgreSQL 11,
+      <application>repmgrd</application> should be shut down completely and only started up
      once the &repmgr; packages for the new PostgreSQL major version have been installed.
    </para>
  </note>

  <sect2 id="repmgrd-pausing-prerequisites">
-    <title>Prerequisites for pausing &repmgrd;</title>
+    <title>Prerequisites for pausing <application>repmgrd</application></title>
    <para>
-      In order to be able to pause/unpause &repmgrd;, following
+      In order to be able to pause/unpause <application>repmgrd</application>, following
      prerequisites must be met:
      <itemizedlist spacing="compact" mark="bullet">

@@ -86,23 +86,19 @@
  </sect2>

  <sect2 id="repmgrd-pausing-execution">
-    <title>Pausing/unpausing &repmgrd;</title>
+    <title>Pausing/unpausing <application>repmgrd</application></title>
    <para>
-      To pause &repmgrd;, execute <link linkend="repmgr-service-pause"><command>repmgr service pause</command></link>
-      (&repmgr; 4.2 - 4.4: <link linkend="repmgr-service-pause"><command>repmgr daemon pause</command></link>),
-      e.g.:
+      To pause <application>repmgrd</application>, execute <link linkend="repmgr-daemon-pause"><command>repmgr daemon pause</command></link>, e.g.:
   <programlisting>
-$ repmgr -f /etc/repmgr.conf service pause
+$ repmgr -f /etc/repmgr.conf daemon pause
 NOTICE: node 1 (node1) paused
 NOTICE: node 2 (node2) paused
 NOTICE: node 3 (node3) paused</programlisting>
    </para>
    <para>
-      The state of &repmgrd; on each node can be checked with
-      <link linkend="repmgr-service-status"><command>repmgr service status</command></link>
-      (&repmgr; 4.2 - 4.4: <link linkend="repmgr-service-status"><command>repmgr daemon status</command></link>),
-      e.g.:
-    <programlisting>$ repmgr -f /etc/repmgr.conf service status
+      The state of <application>repmgrd</application> on each node can be checked with
+      <link linkend="repmgr-daemon-status"><command>repmgr daemon status</command></link>, e.g.:
+    <programlisting>$ repmgr -f /etc/repmgr.conf daemon status
 ID | Name  | Role    | Status  | repmgrd | PID  | Paused?
 ----+-------+---------+---------+---------+------+---------
 1  | node1 | primary | running | running | 7851 | yes
@@ -112,41 +108,38 @@ NOTICE: node 3 (node3) paused</programlisting>

    <note>
      <para>
-        If executing a switchover with <link linkend="repmgr-standby-switchover"><command>repmgr standby switchover</command></link>,
-	&repmgr; will automatically pause/unpause the &repmgrd; service as part of the switchover process.
+        If executing a switchover with  <link linkend="repmgr-standby-switchover"><command>repmgr standby switchover</command></link>,
+		&repmgr; will automatically pause/unpause <application>repmgrd</application> as part of the switchover process.
      </para>
    </note>

    <para>
-      If the primary (in this example, <literal>node1</literal>) is stopped, &repmgrd;
+      If the primary (in this example, <literal>node1</literal>) is stopped, <application>repmgrd</application>
      running on one of the standbys (here: <literal>node2</literal>) will react like this:
      <programlisting>
-[2019-08-28 12:22:21] [WARNING] unable to connect to upstream node "node1" (node ID: 1)
-[2019-08-28 12:22:21] [INFO] checking state of node 1, 1 of 5 attempts
-[2019-08-28 12:22:21] [INFO] sleeping 1 seconds until next reconnection attempt
+[2018-09-20 12:22:21] [WARNING] unable to connect to upstream node "node1" (node ID: 1)
+[2018-09-20 12:22:21] [INFO] checking state of node 1, 1 of 5 attempts
+[2018-09-20 12:22:21] [INFO] sleeping 1 seconds until next reconnection attempt
 ...
-[2019-08-28 12:22:24] [INFO] sleeping 1 seconds until next reconnection attempt
-[2019-08-28 12:22:25] [INFO] checking state of node 1, 5 of 5 attempts
-[2019-08-28 12:22:25] [WARNING] unable to reconnect to node 1 after 5 attempts
-[2019-08-28 12:22:25] [NOTICE] node is paused
-[2019-08-28 12:22:33] [INFO] node "node2" (ID: 2) monitoring upstream node "node1" (node ID: 1) in degraded state
-[2019-08-28 12:22:33] [DETAIL] repmgrd paused by administrator
-[2019-08-28 12:22:33] [HINT] execute "repmgr service unpause" to resume normal failover mode</programlisting>
+[2018-09-20 12:22:24] [INFO] sleeping 1 seconds until next reconnection attempt
+[2018-09-20 12:22:25] [INFO] checking state of node 1, 5 of 5 attempts
+[2018-09-20 12:22:25] [WARNING] unable to reconnect to node 1 after 5 attempts
+[2018-09-20 12:22:25] [NOTICE] node is paused
+[2018-09-20 12:22:33] [INFO] node "node2" (node ID: 2) monitoring upstream node "node1" (node ID: 1) in degraded state
+[2018-09-20 12:22:33] [DETAIL] repmgrd paused by administrator
+[2018-09-20 12:22:33] [HINT] execute "repmgr daemon unpause" to resume normal failover mode</programlisting>
    </para>
    <para>
-      If the primary becomes available again (e.g. following a software upgrade), &repmgrd;
+      If the primary becomes available again (e.g. following a software upgrade), <application>repmgrd</application>
      will automatically reconnect, e.g.:
      <programlisting>
-[2019-08-28 12:25:41] [NOTICE] reconnected to upstream node "node1" (ID: 1) after 8 seconds, resuming monitoring</programlisting>
+[2018-09-20 13:12:41] [NOTICE] reconnected to upstream node 1 after 8 seconds, resuming monitoring</programlisting>
    </para>

    <para>
-      To unpause the &repmgrd; service, execute
-      <link linkend="repmgr-service-unpause"><command>repmgr service unpause</command></link>
-      ((&repmgr; 4.2 - 4.4: <link linkend="repmgr-service-unpause"><command>repmgr daemon unpause</command></link>),
-      e.g.:
+      To unpause <application>repmgrd</application>, execute <link linkend="repmgr-daemon-unpause"><command>repmgr daemon unpause</command></link>, e.g.:
   <programlisting>
-$ repmgr -f /etc/repmgr.conf service unpause
+$ repmgr -f /etc/repmgr.conf daemon unpause
 NOTICE: node 1 (node1) unpaused
 NOTICE: node 2 (node2) unpaused
 NOTICE: node 3 (node3) unpaused</programlisting>
@@ -154,61 +147,54 @@ NOTICE: node 3 (node3) unpaused</programlisting>

    <note>
      <para>
-        If the previous primary is no longer accessible when &repmgrd;
+        If the previous primary is no longer accessible when <application>repmgrd</application>
        is unpaused, no failover action will be taken. Instead, a new primary must be manually promoted using
        <link linkend="repmgr-standby-promote"><command>repmgr standby promote</command></link>,
-	and any standbys attached to the new primary with
-	<link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>.
+		and any standbys attached to the new primary with
+		<link linkend="repmgr-standby-follow"><command>repmgr standby follow</command></link>.
      </para>
      <para>
-        This is to prevent execution of <link linkend="repmgr-service-unpause"><command>repmgr service unpause</command></link>
+        This is to prevent <link linkend="repmgr-daemon-unpause"><command>repmgr daemon unpause</command></link>
        resulting in the automatic promotion of a new primary, which may be a problem particularly
-        in larger clusters, where &repmgrd; could select a different promotion
+        in larger clusters, where <application>repmgrd</application> could select a different promotion
        candidate to the one intended by the administrator.
      </para>
    </note>
  </sect2>
  <sect2 id="repmgrd-pausing-details">
-    <title>Details on the &repmgrd; pausing mechanism</title>
+    <title>Details on the <application>repmgrd</application> pausing mechanism</title>

    <para>
      The pause state of each node will be stored over a PostgreSQL restart.
    </para>

-    <para>
-      <link linkend="repmgr-service-pause"><command>repmgr service pause</command></link> and
-      <link linkend="repmgr-service-unpause"><command>repmgr service unpause</command></link> can be
-      executed even if &repmgrd; is not running; in this case,
-      &repmgrd; will start up in whichever pause state has been set.
-    </para>
+	<para>
+	  <link linkend="repmgr-daemon-pause"><command>repmgr daemon pause</command></link> and
+	  <link linkend="repmgr-daemon-unpause"><command>repmgr daemon unpause</command></link> can be
+	  executed even if <application>repmgrd</application> is not running; in this case,
+	  <application>repmgrd</application> will start up in whichever pause state has been set.
+	</para>
    <note>
      <para>
-	    <link linkend="repmgr-service-pause"><command>repmgr service pause</command></link> and
-	    <link linkend="repmgr-service-unpause"><command>repmgr service unpause</command></link>
-	    <emphasis>do not</emphasis> start/stop &repmgrd;.
-      </para>
-      <para>
-        The commands <link linkend="repmgr-daemon-start"><command>repmgr daemon start</command></link>
-        and <link linkend="repmgr-daemon-stop"><command>repmgr daemon stop</command></link>
-        (<link linkend="repmgrd-service-configuration">if correctly configured</link>) can be used to start/stop
-        &repmgrd; on individual nodes.
+		<link linkend="repmgr-daemon-pause"><command>repmgr daemon pause</command></link> and
+		<link linkend="repmgr-daemon-unpause"><command>repmgr daemon unpause</command></link>
+		<emphasis>do not</emphasis> stop/start <application>repmgrd</application>.
      </para>
    </note>
  </sect2>
  </sect1>

  <sect1 id="repmgrd-wal-replay-pause">
-    <title>repmgrd and paused WAL replay</title>
-
    <indexterm>
      <primary>repmgrd</primary>
      <secondary>paused WAL replay</secondary>
    </indexterm>

+    <title>repmgrd and paused WAL replay</title>
    <para>
      If WAL replay has been paused (using <command>pg_wal_replay_pause()</command>,
      on PostgreSQL 9.6 and earlier <command>pg_xlog_replay_pause()</command>),
-      in a failover situation &repmgrd; will
+      in a failover situation <application>repmgrd</application> will
      automatically resume WAL replay.
    </para>
    <para>
@@ -228,8 +214,6 @@ NOTICE: node 3 (node3) unpaused</programlisting>
  </sect1>

 <sect1 id="repmgrd-degraded-monitoring" xreflabel="repmgrd degraded monitoring">
- <title>"degraded monitoring" mode</title>
-
 <indexterm>
   <primary>repmgrd</primary>
   <secondary>degraded monitoring</secondary>
@@ -239,10 +223,11 @@ NOTICE: node 3 (node3) unpaused</programlisting>
   <primary>degraded monitoring</primary>
 </indexterm>

+ <title>"degraded monitoring" mode</title>
 <para>
-  In certain circumstances, &repmgrd; is not able to fulfill its primary mission
+  In certain circumstances, <application>repmgrd</application> is not able to fulfill its primary mission
  of monitoring the node's upstream server. In these cases it enters &quot;degraded monitoring&quot;
-  mode, where &repmgrd; remains active but is waiting for the situation
+  mode, where <application>repmgrd</application> remains active but is waiting for the situation
  to be resolved.
 </para>
 <para>
@@ -283,8 +268,8 @@ NOTICE: node 3 (node3) unpaused</programlisting>
  Example output in a situation where there is only one standby with <literal>failover=manual</literal>,
  and the primary node is unavailable (but is later restarted):
  <programlisting>
-    [2017-08-29 10:59:19] [INFO] node "node2" (ID: 2) monitoring upstream node "node1" (ID: 1) in normal state (automatic failover disabled)
-    [2017-08-29 10:59:33] [WARNING] unable to connect to upstream node "node1" (ID: 1)
+    [2017-08-29 10:59:19] [INFO] node "node2" (node ID: 2) monitoring upstream node "node1" (node ID: 1) in normal state (automatic failover disabled)
+    [2017-08-29 10:59:33] [WARNING] unable to connect to upstream node "node1" (node ID: 1)
    [2017-08-29 10:59:33] [INFO] checking state of node 1, 1 of 5 attempts
    [2017-08-29 10:59:33] [INFO] sleeping 1 seconds until next reconnection attempt
    (...)
@@ -293,21 +278,21 @@ NOTICE: node 3 (node3) unpaused</programlisting>
    [2017-08-29 10:59:37] [NOTICE] this node is not configured for automatic failover so will not be considered as promotion candidate
    [2017-08-29 10:59:37] [NOTICE] no other nodes are available as promotion candidate
    [2017-08-29 10:59:37] [HINT] use "repmgr standby promote" to manually promote this node
-    [2017-08-29 10:59:37] [INFO] node "node2" (ID: 2) monitoring upstream node "node1" (ID: 1) in degraded state (automatic failover disabled)
-    [2017-08-29 10:59:53] [INFO] node "node2" (ID: 2) monitoring upstream node "node1" (ID: 1) in degraded state (automatic failover disabled)
-    [2017-08-29 11:00:45] [NOTICE] reconnected to upstream node "node1" (ID: 1) after 68 seconds, resuming monitoring
-    [2017-08-29 11:00:57] [INFO] node "node2" (ID: 2) monitoring upstream node "node1" (ID: 1) in normal state (automatic failover disabled)</programlisting>
+    [2017-08-29 10:59:37] [INFO] node "node2" (node ID: 2) monitoring upstream node "node1" (node ID: 1) in degraded state (automatic failover disabled)
+    [2017-08-29 10:59:53] [INFO] node "node2" (node ID: 2) monitoring upstream node "node1" (node ID: 1) in degraded state (automatic failover disabled)
+    [2017-08-29 11:00:45] [NOTICE] reconnected to upstream node 1 after 68 seconds, resuming monitoring
+    [2017-08-29 11:00:57] [INFO] node "node2" (node ID: 2) monitoring upstream node "node1" (node ID: 1) in normal state (automatic failover disabled)</programlisting>

 </para>
 <para>
  By default, <literal>repmgrd</literal> will continue in degraded monitoring mode indefinitely.
  However a timeout (in seconds) can be set with <varname>degraded_monitoring_timeout</varname>,
-  after which &repmgrd; will terminate.
+  after which <application>repmgrd</application> will terminate.
 </para>

 <note>
   <para>
-     If &repmgrd; is monitoring a primary mode which has been stopped
+     If <application>repmgrd</application> is monitoring a primary mode which has been stopped
     and manually restarted as a standby attached to a new primary, it will automatically detect
     the status change and update the node record to reflect the node's new status
     as an active standby. It will then resume monitoring the node as a standby.
@@ -317,7 +302,6 @@ NOTICE: node 3 (node3) unpaused</programlisting>


 <sect1 id="repmgrd-monitoring" xreflabel="Storing monitoring data">
- <title>Storing monitoring data</title>
 <indexterm>
   <primary>repmgrd</primary>
   <secondary>monitoring</secondary>
@@ -327,8 +311,9 @@ NOTICE: node 3 (node3) unpaused</programlisting>
   <secondary>with repmgrd</secondary>
 </indexterm>

+ <title>Storing monitoring data</title>
 <para>
-   When &repmgrd; is running with the option <literal>monitoring_history=true</literal>,
+   When <application>repmgrd</application> is running with the option <literal>monitoring_history=true</literal>,
  it will constantly write standby node status information to the
  <varname>monitoring_history</varname> table, providing a near-real time
  overview of replication status on all nodes
@@ -361,12 +346,12 @@ NOTICE: node 3 (node3) unpaused</programlisting>
 <para>
  As this can generate a large amount of monitoring data in the table
  <literal>repmgr.monitoring_history</literal>. it's advisable to regularly
-  purge historical data using the <xref linkend="repmgr-cluster-cleanup"/>
+  purge historical data using the <xref linkend="repmgr-cluster-cleanup">
  command; use the <literal>-k/--keep-history</literal> option to
  specify how many day's worth of data should be retained.
 </para>
 <para>
-  It's possible to use &repmgrd; to run in monitoring
+  It's possible to use <application>repmgrd</application> to run in monitoring
  mode only (without automatic failover capability) for some or all
  nodes by setting <literal>failover=manual</literal> in the node's
  <filename>repmgr.conf</filename> file. In the event of the node's upstream failing,
--- a/doc/repmgrd-overview.sgml
+++ b/doc/repmgrd-overview.sgml
@@ -0,0 +1,122 @@
+<chapter id="repmgrd-overview" xreflabel="repmgrd overview">
+  <indexterm>
+    <primary>repmgrd</primary>
+    <secondary>overview</secondary>
+  </indexterm>
+
+  <title>repmgrd overview</title>
+
+  <para>
+    <application>repmgrd</application> (&quot;<literal>replication manager daemon</literal>&quot;)
+    is a management and monitoring daemon which runs
+    on each node in a replication cluster. It can automate actions such as
+    failover and updating standbys to follow the new primary, as well as
+    providing monitoring information about the state of each standby.
+  </para>
+
+  <sect1 id="repmgrd-demonstration">
+
+    <title>repmgrd demonstration</title>
+    <para>
+  To demonstrate automatic failover, set up a 3-node replication cluster (one primary
+  and two standbys streaming directly from the primary) so that the cluster looks
+  something like this:
+  <programlisting>
+    $ repmgr -f /etc/repmgr.conf cluster show
+     ID | Name  | Role    | Status    | Upstream | Location | Connection string
+    ----+-------+---------+-----------+----------+----------+--------------------------------------
+     1  | node1 | primary | * running |          | default  | host=node1 dbname=repmgr user=repmgr
+     2  | node2 | standby |   running | node1    | default  | host=node2 dbname=repmgr user=repmgr
+     3  | node3 | standby |   running | node1    | default  | host=node3 dbname=repmgr user=repmgr</programlisting>
+ </para>
+
+ <tip>
+   <para>
+     See section <link linkend="repmgrd-automatic-failover-configuration">Required configuration for automatic failover</link>
+     for an example of minimal <filename>repmgr.conf</filename> file settings suitable for use with <application>repmgrd</application>.
+   </para>
+ </tip>
+ <para>
+  Start <application>repmgrd</application> on each standby and verify that it's running by examining the
+  log output, which at log level <literal>INFO</literal> will look like this:
+  <programlisting>
+    [2017-08-24 17:31:00] [NOTICE] using configuration file "/etc/repmgr.conf"
+    [2017-08-24 17:31:00] [INFO] connecting to database "host=node2 dbname=repmgr user=repmgr"
+    [2017-08-24 17:31:00] [NOTICE] starting monitoring of node <literal>node2</literal> (ID: 2)
+    [2017-08-24 17:31:00] [INFO] monitoring connection to upstream node "node1" (node ID: 1)</programlisting>
+ </para>
+ <para>
+  Each <application>repmgrd</application> should also have recorded its successful startup as an event:
+  <programlisting>
+    $ repmgr -f /etc/repmgr.conf cluster event --event=repmgrd_start
+     Node ID | Name  | Event         | OK | Timestamp           | Details
+    ---------+-------+---------------+----+---------------------+-------------------------------------------------------------
+     3       | node3 | repmgrd_start | t  | 2017-08-24 17:35:54 | monitoring connection to upstream node "node1" (node ID: 1)
+     2       | node2 | repmgrd_start | t  | 2017-08-24 17:35:50 | monitoring connection to upstream node "node1" (node ID: 1)
+     1       | node1 | repmgrd_start | t  | 2017-08-24 17:35:46 | monitoring cluster primary "node1" (node ID: 1)  </programlisting>
+ </para>
+ <para>
+  Now stop the current primary server with e.g.:
+  <programlisting>
+    pg_ctl -D /var/lib/postgresql/data -m immediate stop</programlisting>
+ </para>
+ <para>
+  This will force the primary to shut down straight away, aborting all processes
+  and transactions.  This will cause a flurry of activity in the <application>repmgrd</application> log
+  files as each <application>repmgrd</application> detects the failure of the primary and a failover
+  decision is made. This is an extract from the log of a standby server (<literal>node2</literal>)
+  which has promoted to new primary after failure of the original primary (<literal>node1</literal>).
+  <programlisting>
+    [2017-08-24 23:32:01] [INFO] node "node2" (node ID: 2) monitoring upstream node "node1" (node ID: 1) in normal state
+    [2017-08-24 23:32:08] [WARNING] unable to connect to upstream node "node1" (node ID: 1)
+    [2017-08-24 23:32:08] [INFO] checking state of node 1, 1 of 5 attempts
+    [2017-08-24 23:32:08] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-08-24 23:32:09] [INFO] checking state of node 1, 2 of 5 attempts
+    [2017-08-24 23:32:09] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-08-24 23:32:10] [INFO] checking state of node 1, 3 of 5 attempts
+    [2017-08-24 23:32:10] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-08-24 23:32:11] [INFO] checking state of node 1, 4 of 5 attempts
+    [2017-08-24 23:32:11] [INFO] sleeping 1 seconds until next reconnection attempt
+    [2017-08-24 23:32:12] [INFO] checking state of node 1, 5 of 5 attempts
+    [2017-08-24 23:32:12] [WARNING] unable to reconnect to node 1 after 5 attempts
+    INFO:  setting voting term to 1
+    INFO:  node 2 is candidate
+    INFO:  node 3 has received request from node 2 for electoral term 1 (our term: 0)
+    [2017-08-24 23:32:12] [NOTICE] this node is the winner, will now promote self and inform other nodes
+    INFO: connecting to standby database
+    NOTICE: promoting standby
+    DETAIL: promoting server using 'pg_ctl -l /var/log/postgres/startup.log -w -D '/var/lib/pgsql/data' promote'
+    INFO: reconnecting to promoted server
+    NOTICE: STANDBY PROMOTE successful
+    DETAIL: node 2 was successfully promoted to primary
+    INFO:  node 3 received notification to follow node 2
+    [2017-08-24 23:32:13] [INFO] switching to primary monitoring mode</programlisting>
+ </para>
+ <para>
+  The cluster status will now look like this, with the original primary (<literal>node1</literal>)
+  marked as inactive, and standby <literal>node3</literal> now following the new primary
+  (<literal>node2</literal>):
+  <programlisting>
+    $ repmgr -f /etc/repmgr.conf cluster show
+     ID | Name  | Role    | Status    | Upstream | Location | Connection string
+    ----+-------+---------+-----------+----------+----------+----------------------------------------------------
+     1  | node1 | primary | - failed  |          | default  | host=node1 dbname=repmgr user=repmgr
+     2  | node2 | primary | * running |          | default  | host=node2 dbname=repmgr user=repmgr
+     3  | node3 | standby |   running | node2    | default  | host=node3 dbname=repmgr user=repmgr</programlisting>
+
+ </para>
+ <para>
+  <command>repmgr cluster event</command> will display a summary of what happened to each server
+  during the failover:
+  <programlisting>
+    $ repmgr -f /etc/repmgr.conf cluster event
+     Node ID | Name  | Event                    | OK | Timestamp           | Details
+    ---------+-------+--------------------------+----+---------------------+-----------------------------------------------------------------------------------
+     3       | node3 | repmgrd_failover_follow  | t  | 2017-08-24 23:32:16 | node 3 now following new upstream node 2
+     3       | node3 | standby_follow           | t  | 2017-08-24 23:32:16 | node 3 is now attached to node 2
+     2       | node2 | repmgrd_failover_promote | t  | 2017-08-24 23:32:13 | node 2 promoted to primary; old primary 1 marked as failed
+     2       | node2 | standby_promote          | t  | 2017-08-24 23:32:13 | node 2 was successfully promoted to primary</programlisting>
+ </para>
+
+  </sect1>
+</chapter>
--- a/doc/repmgrd-overview.xml
+++ b/doc/repmgrd-overview.xml
@@ -1,187 +0,0 @@
-<chapter id="repmgrd-overview" xreflabel="repmgrd overview">
-  <title>repmgrd overview</title>
-
-  <indexterm>
-    <primary>repmgrd</primary>
-    <secondary>overview</secondary>
-  </indexterm>
-
-  <para>
-    &repmgrd; (&quot;<literal>replication manager daemon</literal>&quot;)
-    is a management and monitoring daemon which runs
-    on each node in a replication cluster. It can automate actions such as
-    failover and updating standbys to follow the new primary, as well as
-    providing monitoring information about the state of each standby.
-  </para>
-  <para>
-    &repmgrd; is designed to be straightforward to set up
-    and does not require additional external infrastructure.
-  </para>
-  <para>
-    Functionality provided by &repmgrd; includes:
-    <itemizedlist spacing="compact" mark="bullet">
-
-       <listitem>
-         <simpara>
-           wide range of <link linkend="repmgrd-basic-configuration">configuration options</link>
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           option to execute custom scripts (&quot;<link linkend="event-notifications">event notifications</link>
-           at different points in the failover sequence
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           ability to <link linkend="repmgrd-pausing">pause repmgrd</link>
-           operation on all nodes with a
-           <link linkend="repmgr-service-pause"><command>single command</command></link>
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           optional <link linkend="repmgrd-witness-server">witness server</link>
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           &quot;location&quot; configuration option to restrict
-           potential promotion candidates to a single location
-           (e.g. when nodes are spread over multiple data centres)
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           <link linkend="connection-check-type">choice of method</link> to determine node availability
-           (PostgreSQL ping, query execution or new connection)
-         </simpara>
-       </listitem>
-
-       <listitem>
-         <simpara>
-           retention of monitoring statistics (optional)
-         </simpara>
-       </listitem>
-
-
-    </itemizedlist>
-
-  </para>
-
-  <sect1 id="repmgrd-demonstration">
-
-    <title>repmgrd demonstration</title>
-    <para>
-  To demonstrate automatic failover, set up a 3-node replication cluster (one primary
-  and two standbys streaming directly from the primary) so that the cluster looks
-  something like this:
-  <programlisting>
-    $ repmgr -f /etc/repmgr.conf cluster show --compact
-     ID | Name  | Role    | Status    | Upstream | Location | Prio.
-    ----+-------+---------+-----------+----------+----------+-------
-     1  | node1 | primary | * running |          | default  | 100
-     2  | node2 | standby |   running | node1    | default  | 100
-     3  | node3 | standby |   running | node1    | default  | 100</programlisting>
- </para>
-
- <tip>
-   <para>
-     See section <link linkend="repmgrd-automatic-failover-configuration">Required configuration for automatic failover</link>
-     for an example of minimal <filename>repmgr.conf</filename> file settings suitable for use with &repmgrd;.
-   </para>
- </tip>
- <para>
-  Start &repmgrd; on each standby and verify that it's running by examining the
-  log output, which at log level <literal>INFO</literal> will look like this:
-  <programlisting>
-    [2019-08-15 07:14:42] [NOTICE] repmgrd (repmgrd 5.0) starting up
-    [2019-08-15 07:14:42] [INFO] connecting to database "host=node2 dbname=repmgr user=repmgr connect_timeout=2"
-    INFO:  set_repmgrd_pid(): provided pidfile is /var/run/repmgr/repmgrd-12.pid
-    [2019-08-15 07:14:42] [NOTICE] starting monitoring of node "node2" (ID: 2)
-    [2019-08-15 07:14:42] [INFO] monitoring connection to upstream node "node1" (ID: 1)</programlisting>
- </para>
- <para>
-  Each &repmgrd; should also have recorded its successful startup as an event:
-  <programlisting>
-    $ repmgr -f /etc/repmgr.conf cluster event --event=repmgrd_start
-     Node ID | Name  | Event         | OK | Timestamp           | Details
-    ---------+-------+---------------+----+---------------------+--------------------------------------------------------
-     3       | node3 | repmgrd_start | t  | 2019-08-15 07:14:42 | monitoring connection to upstream node "node1" (ID: 1)
-     2       | node2 | repmgrd_start | t  | 2019-08-15 07:14:41 | monitoring connection to upstream node "node1" (ID: 1)
-     1       | node1 | repmgrd_start | t  | 2019-08-15 07:14:39 | monitoring cluster primary "node1" (ID: 1)</programlisting>
- </para>
- <para>
-  Now stop the current primary server with e.g.:
-  <programlisting>
-    pg_ctl -D /var/lib/postgresql/data -m immediate stop</programlisting>
- </para>
- <para>
-  This will force the primary to shut down straight away, aborting all processes
-  and transactions.  This will cause a flurry of activity in the &repmgrd; log
-  files as each &repmgrd; detects the failure of the primary and a failover
-  decision is made. This is an extract from the log of a standby server (<literal>node2</literal>)
-  which has promoted to new primary after failure of the original primary (<literal>node1</literal>).
-  <programlisting>
-    [2019-08-15 07:27:50] [WARNING] unable to connect to upstream node "node1" (ID: 1)
-    [2019-08-15 07:27:50] [INFO] checking state of node 1, 1 of 3 attempts
-    [2019-08-15 07:27:50] [INFO] sleeping 5 seconds until next reconnection attempt
-    [2019-08-15 07:27:55] [INFO] checking state of node 1, 2 of 3 attempts
-    [2019-08-15 07:27:55] [INFO] sleeping 5 seconds until next reconnection attempt
-    [2019-08-15 07:28:00] [INFO] checking state of node 1, 3 of 3 attempts
-    [2019-08-15 07:28:00] [WARNING] unable to reconnect to node 1 after 3 attempts
-    [2019-08-15 07:28:00] [INFO] primary and this node have the same location ("default")
-    [2019-08-15 07:28:00] [INFO] local node's last receive lsn: 0/900CBF8
-    [2019-08-15 07:28:00] [INFO] node 3 last saw primary node 12 second(s) ago
-    [2019-08-15 07:28:00] [INFO] last receive LSN for sibling node "node3" (ID: 3) is: 0/900CBF8
-    [2019-08-15 07:28:00] [INFO] node "node3" (ID: 3) has same LSN as current candidate "node2" (ID: 2)
-    [2019-08-15 07:28:00] [INFO] visible nodes: 2; total nodes: 2; no nodes have seen the primary within the last 4 seconds
-    [2019-08-15 07:28:00] [NOTICE] promotion candidate is "node2" (ID: 2)
-    [2019-08-15 07:28:00] [NOTICE] this node is the winner, will now promote itself and inform other nodes
-    [2019-08-15 07:28:00] [INFO] promote_command is:
-      "/usr/pgsql-12/bin/repmgr -f /etc/repmgr/12/repmgr.conf standby promote"
-    NOTICE: promoting standby to primary
-    DETAIL: promoting server "node2" (ID: 2) using "/usr/pgsql-12/bin/pg_ctl  -w -D '/var/lib/pgsql/12/data' promote"
-    NOTICE: waiting up to 60 seconds (parameter "promote_check_timeout") for promotion to complete
-    NOTICE: STANDBY PROMOTE successful
-    DETAIL: server "node2" (ID: 2) was successfully promoted to primary
-    [2019-08-15 07:28:01] [INFO] 3 followers to notify
-    [2019-08-15 07:28:01] [NOTICE] notifying node "node3" (ID: 3) to follow node 2
-    INFO:  node 3 received notification to follow node 2
-    [2019-08-15 07:28:01] [INFO] switching to primary monitoring mode
-    [2019-08-15 07:28:01] [NOTICE] monitoring cluster primary "node2" (ID: 2)</programlisting>
- </para>
- <para>
-  The cluster status will now look like this, with the original primary (<literal>node1</literal>)
-  marked as inactive, and standby <literal>node3</literal> now following the new primary
-  (<literal>node2</literal>):
-  <programlisting>
-    $ repmgr -f /etc/repmgr.conf cluster show --compact
-     ID | Name  | Role    | Status    | Upstream | Location | Prio.
-    ----+-------+---------+-----------+----------+----------+-------
-     1  | node1 | primary | - failed  |          | default  | 100
-     2  | node2 | primary | * running |          | default  | 100
-     3  | node3 | standby |   running | node2    | default  | 100</programlisting>
-
- </para>
- <para>
-   <link linkend="repmgr-cluster-event"><command>repmgr cluster event</command></link> will display a summary of
-   what happened to each server during the failover:
-  <programlisting>
-    $ repmgr -f /etc/repmgr.conf cluster event
-     Node ID | Name  | Event                      | OK | Timestamp           | Details
-    ---------+-------+----------------------------+----+---------------------+-------------------------------------------------------------
-     3       | node3 | repmgrd_failover_follow    | t  | 2019-08-15 07:38:03 | node 3 now following new upstream node 2
-     3       | node3 | standby_follow             | t  | 2019-08-15 07:38:02 | standby attached to upstream node "node2" (ID: 2)
-     2       | node2 | repmgrd_reload             | t  | 2019-08-15 07:38:01 | monitoring cluster primary "node2" (ID: 2)
-     2       | node2 | repmgrd_failover_promote   | t  | 2019-08-15 07:38:01 | node 2 promoted to primary; old primary 1 marked as failed
-     2       | node2 | standby_promote            | t  | 2019-08-15 07:38:01 | server "node2" (ID: 2) was successfully promoted to primary</programlisting>
- </para>
-
-  </sect1>
-</chapter>
--- a/doc/stylesheet-common.xsl
+++ b/doc/stylesheet-common.xsl
@@ -1,89 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0">
-
-<!--
-  This file contains XSLT stylesheet customizations that are common to
-  all output formats (HTML, HTML Help, XSL-FO, etc.).
-  -->
-
-<xsl:include href="stylesheet-speedup-common.xsl" />
-
-<!-- Parameters -->
-
-<!--
-<xsl:param name="draft.mode">
-  <xsl:choose>
-    <xsl:when test="contains($repmgr.version, 'devel')">yes</xsl:when>
-    <xsl:otherwise>no</xsl:otherwise>
-  </xsl:choose>
-</xsl:param>
-->
-
-<xsl:param name="show.comments">
-  <xsl:choose>
-    <xsl:when test="contains($repmgr.version, 'devel')">1</xsl:when>
-    <xsl:otherwise>0</xsl:otherwise>
-  </xsl:choose>
-</xsl:param>
-
-<xsl:param name="callout.graphics" select="'0'"></xsl:param>
-<xsl:param name="toc.section.depth">2</xsl:param>
-<xsl:param name="linenumbering.extension" select="'0'"></xsl:param>
-<xsl:param name="section.autolabel" select="1"></xsl:param>
-<xsl:param name="section.label.includes.component.label" select="1"></xsl:param>
-<xsl:param name="refentry.generate.name" select="0"></xsl:param>
-<xsl:param name="refentry.generate.title" select="1"></xsl:param>
-<xsl:param name="refentry.xref.manvolnum" select="0"/>
-<xsl:param name="formal.procedures" select="0"></xsl:param>
-<xsl:param name="generate.consistent.ids" select="1"/>
-<xsl:param name="punct.honorific" select="''"></xsl:param>
-<xsl:param name="variablelist.term.break.after">1</xsl:param>
-<xsl:param name="variablelist.term.separator"></xsl:param>
-<xsl:param name="xref.with.number.and.title" select="0"></xsl:param>
-
-
-<!-- Change display of some elements -->
-
-<xsl:template match="productname">
-  <xsl:call-template name="inline.charseq"/>
-</xsl:template>
-
-<xsl:template match="structfield">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="structname">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="symbol">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="systemitem">
-  <xsl:call-template name="inline.charseq"/>
-</xsl:template>
-
-<xsl:template match="token">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="type">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="programlisting/emphasis">
-  <xsl:call-template name="inline.boldseq"/>
-</xsl:template>
-
-
-<!-- Special support for Tcl synopses -->
-
-<xsl:template match="optional[@role='tcl']">
-  <xsl:text>?</xsl:text>
-  <xsl:call-template name="inline.charseq"/>
-  <xsl:text>?</xsl:text>
-</xsl:template>
-
-</xsl:stylesheet>
--- a/doc/stylesheet-fo.xsl
+++ b/doc/stylesheet-fo.xsl
@@ -1,97 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0"
-                xmlns:fo="http://www.w3.org/1999/XSL/Format">
-
-<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/fo/docbook.xsl"/>
-<xsl:include href="stylesheet-common.xsl" />
-
-<xsl:param name="fop1.extensions" select="1"></xsl:param>
-<xsl:param name="tablecolumns.extension" select="0"></xsl:param>
-<xsl:param name="toc.max.depth">3</xsl:param>
-<xsl:param name="ulink.footnotes" select="1"></xsl:param>
-<xsl:param name="use.extensions" select="1"></xsl:param>
-<xsl:param name="variablelist.as.blocks" select="1"></xsl:param>
-
-<xsl:attribute-set name="monospace.verbatim.properties"
-                   use-attribute-sets="verbatim.properties monospace.properties">
-  <xsl:attribute name="wrap-option">wrap</xsl:attribute>
-</xsl:attribute-set>
-
-<xsl:attribute-set name="nongraphical.admonition.properties">
-  <xsl:attribute name="border-style">solid</xsl:attribute>
-  <xsl:attribute name="border-width">1pt</xsl:attribute>
-  <xsl:attribute name="border-color">black</xsl:attribute>
-  <xsl:attribute name="padding-start">12pt</xsl:attribute>
-  <xsl:attribute name="padding-end">12pt</xsl:attribute>
-  <xsl:attribute name="padding-top">6pt</xsl:attribute>
-  <xsl:attribute name="padding-bottom">6pt</xsl:attribute>
-</xsl:attribute-set>
-
-<xsl:attribute-set name="admonition.title.properties">
-  <xsl:attribute name="text-align">center</xsl:attribute>
-</xsl:attribute-set>
-
-<!-- fix missing space after vertical simplelist
-     https://github.com/docbook/xslt10-stylesheets/issues/31 -->
-<xsl:attribute-set name="normal.para.spacing">
-  <xsl:attribute name="space-after.optimum">1em</xsl:attribute>
-  <xsl:attribute name="space-after.minimum">0.8em</xsl:attribute>
-  <xsl:attribute name="space-after.maximum">1.2em</xsl:attribute>
-</xsl:attribute-set>
-
-<!-- Change display of some elements -->
-
-<xsl:template match="command">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="confgroup" mode="bibliography.mode">
-  <fo:inline>
-    <xsl:apply-templates select="conftitle/text()" mode="bibliography.mode"/>
-    <xsl:text>, </xsl:text>
-    <xsl:apply-templates select="confdates/text()" mode="bibliography.mode"/>
-    <xsl:value-of select="$biblioentry.item.separator"/>
-  </fo:inline>
-</xsl:template>
-
-<xsl:template match="isbn" mode="bibliography.mode">
-  <fo:inline>
-    <xsl:text>ISBN </xsl:text>
-    <xsl:apply-templates mode="bibliography.mode"/>
-    <xsl:value-of select="$biblioentry.item.separator"/>
-  </fo:inline>
-</xsl:template>
-
-<!-- bug fix from <https://sourceforge.net/p/docbook/bugs/1360/#831b> -->
-
-<xsl:template match="varlistentry/term" mode="xref-to">
-  <xsl:param name="verbose" select="1"/>
-  <xsl:apply-templates mode="no.anchor.mode"/>
-</xsl:template>
-
-<!-- include refsects in PDF bookmarks
-     (https://github.com/docbook/xslt10-stylesheets/issues/46) -->
-
-<xsl:template match="refsect1|refsect2|refsect3"
-              mode="bookmark">
-
-  <xsl:variable name="id">
-    <xsl:call-template name="object.id"/>
-  </xsl:variable>
-  <xsl:variable name="bookmark-label">
-    <xsl:apply-templates select="." mode="object.title.markup"/>
-  </xsl:variable>
-
-  <fo:bookmark internal-destination="{$id}">
-    <xsl:attribute name="starting-state">
-      <xsl:value-of select="$bookmarks.state"/>
-    </xsl:attribute>
-    <fo:bookmark-title>
-      <xsl:value-of select="normalize-space($bookmark-label)"/>
-    </fo:bookmark-title>
-    <xsl:apply-templates select="*" mode="bookmark"/>
-  </fo:bookmark>
-</xsl:template>
-
-</xsl:stylesheet>
--- a/doc/stylesheet-html-common.xsl
+++ b/doc/stylesheet-html-common.xsl
@@ -1,292 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!DOCTYPE xsl:stylesheet [
-<!ENTITY % common.entities SYSTEM "http://docbook.sourceforge.net/release/xsl/current/common/entities.ent">
-%common.entities;
-]>
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0">
-
-<!--
-  This file contains XSLT stylesheet customizations that are common to
-  all HTML output variants (chunked and single-page).
-  -->
-
-<!-- Parameters -->
-<xsl:param name="make.valid.html" select="1"></xsl:param>
-<xsl:param name="generate.id.attributes" select="1"></xsl:param>
-<xsl:param name="make.graphic.viewport" select="0"/>
-<xsl:param name="link.mailto.url">pgsql-docs@lists.postgresql.org</xsl:param>
-<xsl:param name="toc.max.depth">2</xsl:param>
-
-
-<!-- Change display of some elements -->
-
-<xsl:template match="command">
-  <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="confgroup" mode="bibliography.mode">
-  <span>
-    <xsl:call-template name="common.html.attributes"/>
-    <xsl:call-template name="id.attribute"/>
-    <xsl:apply-templates select="conftitle/text()" mode="bibliography.mode"/>
-    <xsl:text>, </xsl:text>
-    <xsl:apply-templates select="confdates/text()" mode="bibliography.mode"/>
-    <xsl:copy-of select="$biblioentry.item.separator"/>
-  </span>
-</xsl:template>
-
-<xsl:template match="isbn" mode="bibliography.mode">
-  <span>
-    <xsl:call-template name="common.html.attributes"/>
-    <xsl:call-template name="id.attribute"/>
-    <xsl:text>ISBN </xsl:text>
-    <xsl:apply-templates mode="bibliography.mode"/>
-    <xsl:copy-of select="$biblioentry.item.separator"/>
-  </span>
-</xsl:template>
-
-
-<!-- table of contents configuration -->
-
-<xsl:param name="generate.toc">
-appendix  toc,title
-article/appendix  nop
-article   toc,title
-book      toc,title
-chapter   toc,title
-part      toc,title
-preface   toc,title
-qandadiv  toc
-qandaset  toc
-reference toc,title
-sect1     toc
-sect2     toc
-sect3     toc
-sect4     toc
-sect5     toc
-section   toc
-set       toc,title
-</xsl:param>
-
-<xsl:param name="generate.section.toc.level" select="1"></xsl:param>
-
-<!-- include refentry under sect1 in tocs -->
-<xsl:template match="sect1" mode="toc">
-  <xsl:param name="toc-context" select="."/>
-  <xsl:call-template name="subtoc">
-    <xsl:with-param name="toc-context" select="$toc-context"/>
-    <xsl:with-param name="nodes" select="sect2|refentry
-                                         |bridgehead[$bridgehead.in.toc != 0]"/>
-  </xsl:call-template>
-</xsl:template>
-
-
-<!-- Put index "quicklinks" (A | B | C | ...) at the top of the bookindex page. -->
-
-<!-- from html/autoidx.xsl -->
-
-<xsl:template name="generate-basic-index">
-  <xsl:param name="scope" select="NOTANODE"/>
-
-  <xsl:variable name="role">
-    <xsl:if test="$index.on.role != 0">
-      <xsl:value-of select="@role"/>
-    </xsl:if>
-  </xsl:variable>
-
-  <xsl:variable name="type">
-    <xsl:if test="$index.on.type != 0">
-      <xsl:value-of select="@type"/>
-    </xsl:if>
-  </xsl:variable>
-
-  <xsl:variable name="terms"
-                select="//indexterm
-                        [count(.|key('letter',
-                          translate(substring(&primary;, 1, 1),
-                             &lowercase;,
-                             &uppercase;))
-                          [&scope;][1]) = 1
-                          and not(@class = 'endofrange')]"/>
-
-  <xsl:variable name="alphabetical"
-                select="$terms[contains(concat(&lowercase;, &uppercase;),
-                                        substring(&primary;, 1, 1))]"/>
-
-  <xsl:variable name="others" select="$terms[not(contains(concat(&lowercase;,
-                                                 &uppercase;),
-                                             substring(&primary;, 1, 1)))]"/>
-
-  <div class="index">
-    <!-- pgsql-docs: begin added stuff -->
-    <p class="indexdiv-quicklinks">
-      <a href="#indexdiv-Symbols">
-        <xsl:call-template name="gentext">
-          <xsl:with-param name="key" select="'index symbols'"/>
-        </xsl:call-template>
-      </a>
-      <xsl:apply-templates select="$alphabetical[count(.|key('letter',
-                                   translate(substring(&primary;, 1, 1),
-                                   &lowercase;,&uppercase;))[&scope;][1]) = 1]"
-                           mode="index-div-quicklinks">
-        <xsl:with-param name="position" select="position()"/>
-        <xsl:with-param name="scope" select="$scope"/>
-        <xsl:with-param name="role" select="$role"/>
-        <xsl:with-param name="type" select="$type"/>
-        <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
-      </xsl:apply-templates>
-    </p>
-    <!-- pgsql-docs: end added stuff -->
-
-    <xsl:if test="$others">
-      <xsl:choose>
-        <xsl:when test="normalize-space($type) != '' and
-                        $others[@type = $type][count(.|key('primary', &primary;)[&scope;][1]) = 1]">
-          <!-- pgsql-docs: added id attribute here for linking to it -->
-          <div class="indexdiv" id="indexdiv-Symbols">
-            <h3>
-              <xsl:call-template name="gentext">
-                <xsl:with-param name="key" select="'index symbols'"/>
-              </xsl:call-template>
-            </h3>
-            <dl>
-              <xsl:apply-templates select="$others[count(.|key('primary', &primary;)[&scope;][1]) = 1]"
-                                   mode="index-symbol-div">
-                <xsl:with-param name="position" select="position()"/>
-                <xsl:with-param name="scope" select="$scope"/>
-                <xsl:with-param name="role" select="$role"/>
-                <xsl:with-param name="type" select="$type"/>
-                <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
-              </xsl:apply-templates>
-            </dl>
-          </div>
-        </xsl:when>
-        <xsl:when test="normalize-space($type) != ''">
-          <!-- Output nothing, as there isn't a match for $other using this $type -->
-        </xsl:when>
-        <xsl:otherwise>
-          <!-- pgsql-docs: added id attribute here for linking to it -->
-          <div class="indexdiv" id="indexdiv-Symbols">
-            <h3>
-              <xsl:call-template name="gentext">
-                <xsl:with-param name="key" select="'index symbols'"/>
-              </xsl:call-template>
-            </h3>
-            <dl>
-              <xsl:apply-templates select="$others[count(.|key('primary',
-                                          &primary;)[&scope;][1]) = 1]"
-                                  mode="index-symbol-div">
-                <xsl:with-param name="position" select="position()"/>
-                <xsl:with-param name="scope" select="$scope"/>
-                <xsl:with-param name="role" select="$role"/>
-                <xsl:with-param name="type" select="$type"/>
-                <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
-              </xsl:apply-templates>
-            </dl>
-          </div>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:if>
-
-    <xsl:apply-templates select="$alphabetical[count(.|key('letter',
-                                 translate(substring(&primary;, 1, 1),
-                                           &lowercase;,&uppercase;))[&scope;][1]) = 1]"
-                         mode="index-div-basic">
-      <xsl:with-param name="position" select="position()"/>
-      <xsl:with-param name="scope" select="$scope"/>
-      <xsl:with-param name="role" select="$role"/>
-      <xsl:with-param name="type" select="$type"/>
-      <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
-    </xsl:apply-templates>
-  </div>
-</xsl:template>
-
-<xsl:template match="indexterm" mode="index-div-basic">
-  <xsl:param name="scope" select="."/>
-  <xsl:param name="role" select="''"/>
-  <xsl:param name="type" select="''"/>
-
-  <xsl:variable name="key"
-                select="translate(substring(&primary;, 1, 1),
-                         &lowercase;,&uppercase;)"/>
-
-  <xsl:if test="key('letter', $key)[&scope;]
-                [count(.|key('primary', &primary;)[&scope;][1]) = 1]">
-    <div class="indexdiv">
-      <!-- pgsql-docs: added id attribute here for linking to it -->
-      <xsl:attribute name="id">
-        <xsl:value-of select="concat('indexdiv-', $key)"/>
-      </xsl:attribute>
-
-      <xsl:if test="contains(concat(&lowercase;, &uppercase;), $key)">
-        <h3>
-          <xsl:value-of select="translate($key, &lowercase;, &uppercase;)"/>
-        </h3>
-      </xsl:if>
-      <dl>
-        <xsl:apply-templates select="key('letter', $key)[&scope;]
-                                     [count(.|key('primary', &primary;)
-                                     [&scope;][1])=1]"
-                             mode="index-primary">
-          <xsl:with-param name="position" select="position()"/>
-          <xsl:with-param name="scope" select="$scope"/>
-          <xsl:with-param name="role" select="$role"/>
-          <xsl:with-param name="type" select="$type"/>
-          <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
-        </xsl:apply-templates>
-      </dl>
-    </div>
-  </xsl:if>
-</xsl:template>
-
-<!-- pgsql-docs -->
-<xsl:template match="indexterm" mode="index-div-quicklinks">
-  <xsl:param name="scope" select="."/>
-  <xsl:param name="role" select="''"/>
-  <xsl:param name="type" select="''"/>
-
-  <xsl:variable name="key"
-                select="translate(substring(&primary;, 1, 1),
-                        &lowercase;,&uppercase;)"/>
-
-  <xsl:if test="key('letter', $key)[&scope;]
-                [count(.|key('primary', &primary;)[&scope;][1]) = 1]">
-    <xsl:if test="contains(concat(&lowercase;, &uppercase;), $key)">
-      |
-      <a>
-        <xsl:attribute name="href">
-          <xsl:value-of select="concat('#indexdiv-', $key)"/>
-        </xsl:attribute>
-        <xsl:value-of select="translate($key, &lowercase;, &uppercase;)"/>
-      </a>
-    </xsl:if>
-  </xsl:if>
-</xsl:template>
-
-
-<!-- upper case HTML anchors for backward compatibility -->
-
-<xsl:template name="object.id">
-  <xsl:param name="object" select="."/>
-  <xsl:choose>
-    <xsl:when test="$object/@id">
-      <xsl:value-of select="translate($object/@id, &lowercase;, &uppercase;)"/>
-    </xsl:when>
-    <xsl:when test="$object/@xml:id">
-      <xsl:value-of select="$object/@xml:id"/>
-    </xsl:when>
-    <xsl:when test="$generate.consistent.ids != 0">
-      <!-- Make $object the current node -->
-      <xsl:for-each select="$object">
-        <xsl:text>id-</xsl:text>
-        <xsl:number level="multiple" count="*"/>
-      </xsl:for-each>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of select="generate-id($object)"/>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-</xsl:stylesheet>
--- a/doc/stylesheet-html-nochunk.xsl
+++ b/doc/stylesheet-html-nochunk.xsl
@@ -1,23 +0,0 @@
-<?xml version='1.0'?>
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version='1.0'
-                xmlns="http://www.w3.org/TR/xhtml1/transitional"
-                exclude-result-prefixes="#default">
-
-<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"/>
-<xsl:include href="stylesheet-common.xsl" />
-<xsl:include href="stylesheet-html-common.xsl" />
-<xsl:include href="stylesheet-speedup-xhtml.xsl" />
-
-<!-- embed SVG images into output file -->
-<xsl:template match="imagedata[@format='SVG']">
-  <xsl:variable name="filename">
-    <xsl:call-template name="mediaobject.filename">
-      <xsl:with-param name="object" select=".."/>
-    </xsl:call-template>
-  </xsl:variable>
-
-  <xsl:copy-of select="document($filename)"/>
-</xsl:template>
-
-</xsl:stylesheet>
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
John Naylor	b9ee57ee0f	Fix assorted Makefile bugs 1. The target additional-maintainer-clean was misspelled as maintainer-additional-clean. 2. Add add missing clean targets, in particular sysutils.o, config.h, repmgr_version.h, and Makefile.global. While at it, use a wildcard for obj files. 3. Don't delete configure. 4. Remove generated file doc/version.sgml from the repo. 5. Have maintainer-clean recurse to the doc directory.	2019-03-15 16:30:27 +09:00
Ian Barwick	d5d6ed4be7	Bump version 4.3rc1	2019-03-15 14:41:41 +09:00
Ian Barwick	f4655074ae	doc: miscellaenous cleanup	2019-03-15 14:39:55 +09:00
Ian Barwick	67d26ab7e2	doc: tweak wording in event notification documentation	2019-03-15 14:08:18 +09:00
Ian Barwick	70a7b45a03	doc: add explanation of the configuration file format	2019-03-15 14:07:19 +09:00
Ian Barwick	4251590833	doc: update "connection_check_type" descriptions	2019-03-15 14:07:13 +09:00
Ian Barwick	9347d34ce0	repmgrd: optionally check upstream availability through connection attempts	2019-03-15 14:07:08 +09:00
John Naylor	feb90ee50c	Correct some doc typos	2019-03-15 14:07:05 +09:00
Ian Barwick	0a6486bb7f	doc: expand "standby_disconnect_on_failover" documentation	2019-03-15 14:07:01 +09:00
Ian Barwick	39443bbcee	Count witness and zero-priority nodes in visibility check	2019-03-15 14:06:58 +09:00
Ian Barwick	fc636b1bd2	Ensure witness node sets last upstream seen time	2019-03-15 14:06:55 +09:00
Ian Barwick	048bad1c88	doc: fix option name typo	2019-03-15 14:06:51 +09:00
Ian Barwick	4528eb1796	doc: expand "failover_validate_command" documentation	2019-03-15 14:06:37 +09:00
Ian Barwick	169c9ccd32	repmgrd: improve logging output when executing "failover_validate_command"	2019-03-15 14:06:34 +09:00
Ian Barwick	5f92fbddf2	doc: various updates	2019-03-15 14:06:30 +09:00
Ian Barwick	617e466f72	doc: merge repmgrd witness server description into failover section	2019-03-13 16:19:41 +09:00
Ian Barwick	435fac297b	doc: merge repmgrd split network handling description into failover section	2019-03-13 16:19:37 +09:00
Ian Barwick	4bc12b4c94	doc: merge repmgrd monitoring description into operating section	2019-03-13 16:19:33 +09:00
Ian Barwick	91234994e2	doc: merge repmgrd degraded monitoring description into operation section	2019-03-13 16:19:30 +09:00
Ian Barwick	ee9da30f20	doc: merge repmgrd notes into operation documentation	2019-03-13 16:19:27 +09:00
Ian Barwick	2e67bc1341	doc: merge repmgrd pause documentation into overview	2019-03-13 16:19:24 +09:00
Ian Barwick	18ab5cab4e	doc: initial repmgrd doc refactoring	2019-03-13 16:19:20 +09:00
Ian Barwick	60bb4e9fc8	doc: update repmgrd configuration documentation	2019-03-13 16:19:17 +09:00
Ian Barwick	52bee6b98d	repmgrd: various minor logging improvements	2019-03-13 16:19:13 +09:00
Ian Barwick	ecb1f379f5	repmgrd: remove global variable Make the "sibling_nodes" local, and pass by reference where relevant.	2019-03-13 16:19:10 +09:00
Ian Barwick	e1cd2c22d4	repmgrd: enable election rerun If "failover_validation_command" is set, and the command returns an error, rerun the election. There is a pause between reruns to avoid "churn"; the length of this pause is controlled by the configuration parameter "election_rerun_interval".	2019-03-13 16:19:03 +09:00
Ian Barwick	1dea6b76d9	Remove redundant struct allocation	2019-03-13 16:19:00 +09:00
Ian Barwick	702f90fc9d	doc: update list of reloadable repmgrd configuration options	2019-03-13 16:18:56 +09:00
Ian Barwick	c4d1eec6f3	doc: document "failover_validation_command"	2019-03-13 16:18:53 +09:00
Ian Barwick	b241c606c0	doc: expand repmgrd configuration section	2019-03-13 16:18:50 +09:00
Ian Barwick	45c896d716	Execute "failover_validation_command" when only one standby exists	2019-03-08 15:29:17 +09:00
Ian Barwick	514595ea10	Make "failover_validation_command" reloadable	2019-03-08 15:29:12 +09:00
Ian Barwick	531194fa27	Initial implementation of "failover_validation_command"	2019-03-08 15:29:06 +09:00
Ian Barwick	2aa67c992c	Make recently added configuration options reloadable	2019-03-08 15:28:59 +09:00
Ian Barwick	37892afcfc	Add configuration option "primary_visibility_consensus" This determines whether repmgrd should continue with a failover if one or more nodes report they can still see the standby.	2019-03-08 15:28:53 +09:00
Ian Barwick	e4e5e35552	Add configuration option "sibling_nodes_disconnect_timeout" This controls the maximum length of time in seconds that repmgrd will wait for other standbys to disconnect their WAL receivers in a failover situation. This setting is only used when "standby_disconnect_on_failover" is set to "true".	2019-03-08 15:28:48 +09:00
Ian Barwick	b320c1f0ae	Reset "wal_retrieve_retry_interval" for all nodes	2019-03-08 15:28:42 +09:00
Ian Barwick	280654bed6	repmgrd: don't wait for WAL receiver to reconnect during failover If the WAL receiver has been temporarily disabled, we don't want to wait for it to start up as it may not be able to at that point; we do however need to reset "wal_retrieve_retry_interval".	2019-03-08 15:28:27 +09:00
Ian Barwick	ae675059c0	Improve logging/sanity checking for "node control" options	2019-03-08 15:28:22 +09:00
Ian Barwick	454ebabe89	Improve logging when disabling/enabling WAL receiver Also check action is being run on node which is in recovery.	2019-03-08 15:28:17 +09:00
Ian Barwick	d1d6ef8d12	Check for WAL receiver start up	2019-03-08 15:28:11 +09:00
Ian Barwick	5d6eab74f6	Log warning if "standby_disconnect_on_failover" used on pre-9.5 "standby_disconnect_on_failover" requires availability of "wal_retrieve_retry_interval", which is available from PostgreSQL 9.5. 9.4 will fall out of community support this year, so it doesn't seem productive at this point to do anything more than put the onus on the user to read the documentation and heed any warning messages in the logs.	2019-03-08 15:28:01 +09:00
Ian Barwick	59b7453bbf	repmgrd: optionally disconnect WAL receivers during failover This is intended to ensure that all nodes have a constant LSN while making the failover decision. This feature is experimental and needs to be explicitly enabled with the configuration file option "standby_disconnect_on_failover". Note enabling this option will result in a delay in the failover decision until the WAL receiver is disconnected on all nodes.	2019-03-08 15:27:54 +09:00
Ian Barwick	bde8c7e29c	repmgrd: handle reconnect to restarted server when using "connection" checks	2019-03-08 15:27:49 +09:00
Ian Barwick	bc6584a90d	*_transaction() functions: log error message text as DETAIL Per behaviour elsewhere.	2019-03-06 13:23:57 +09:00
Ian Barwick	074d79b44f	repmgrd: add option "connection_check_type" This enable selection of the method repmgrd uses to check whether the upstream node is available. Possible values are: - "ping" (default): uses PQping() to check server availability - "connection": executes a query on the connection to check server availability (similar to repmgr3.x).	2019-03-06 13:23:53 +09:00
Ian Barwick	2eeb288573	repmgrd: ignore invalid "upstream_last_seen" value	2019-03-06 13:23:47 +09:00
Ian Barwick	48a2274b11	Use appendPQExpBufferStr where approrpriate	2019-03-06 13:23:38 +09:00
Ian Barwick	19bcfa7264	Rename "..._primary_last_seen" functions to "..._upstream_last_seen" As that better reflects what they do.	2019-03-06 13:23:33 +09:00
Ian Barwick	486877c3d5	repmgrd: log details of nodes which can see primary If a failover is cancelled because other nodes can still see the primary, log the identies of those nodes.	2019-03-06 13:23:27 +09:00
Ian Barwick	9753bcc8c3	repmgrd: during failover, check if other nodes have seen the primary In a situation where only some standbys are cut off from the primary, a failover would result in a split brain/split cluster situation, as it's likely one of the cut-off standbys will promote itself, and other cut-off standbys (but not all standbys) will follow it. To prevent this happening, interrogate the other sibiling nodes to check whether they've seen the primary within a reasonably short interval; if this is the case, do not take any failover action. This feature is experimental.	2019-03-06 13:23:22 +09:00
Ian Barwick	bd35b450da	daemon status: with csv output, show repmgrd status as unknown where appropriate Previously, if PostgreSQL was not running on the node, repmgrd and pause status were shown as "0", implying their status was known. This brings the csv output in line with the human-readable output, which displays "n/a" in this case.	2019-02-28 12:28:04 +09:00
Ian Barwick	1f256d4d73	doc: upate release notes	2019-02-28 10:02:05 +09:00
Ian Barwick	1524e2449f	Split command execution functions into separate library These may need to be executed by repmgrd.	2019-02-27 14:41:38 +09:00
Ian Barwick	0cd2bd2e91	repmgrd: add additional logging during a failover operation	2019-02-27 11:45:34 +09:00
Ian Barwick	98b78df16c	Remove unneeded debugging output	2019-02-26 21:17:17 +09:00
Ian Barwick	b946dce2f0	doc: update introductory blurb	2019-02-26 15:19:41 +09:00
Ian Barwick	39234afcbf	standby clone: check upstream connections after data copy operation With long-running copy operations, it's possible the connection(s) to the primary/source server may go away for some reason, so recheck their availability before attempting to reuse.	2019-02-26 14:37:51 +09:00
John Naylor	23569a19b1	Doc fix: PostgreSQL 9.4 is no longer considered recent	2019-02-25 13:02:56 +09:00
John Naylor	c650fd3412	Fix typo	2019-02-25 13:02:51 +09:00
Ian Barwick	c30e65b3f2	Add some missing query error logging	2019-02-25 13:02:45 +09:00