Fix HISTORY to show from newest to oldest

Prepare release notes for release
Add a release note that was missing
2026-03-23 07:06:30 +00:00 · 2012-07-27 11:30:35 -05:00 · 2012-07-21 11:56:00 -05:00 · 2012-07-05 09:36:42 -05:00 · 2012-06-25 22:53:16 -05:00 · 2012-06-13 00:48:34 -05:00
38 changed files with 1439 additions and 4907 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -1,9 +1,6 @@
 *~
 *.o
-*.so
 repmgr
 repmgrd
 README.htm*
 README.pdf
-sql/repmgr_funcs.so
-sql/repmgr_funcs.sql
--- a/2
+++ b/2
@@ -1,4 +1,4 @@
-Copyright (c) 2010-2014, 2ndQuadrant Limited
+Copyright (c) 2010-2011, 2ndQuadrant Limited
 All rights reserved.

 This program is free software: you can redistribute it and/or modify
--- a/6
+++ b/6
@@ -10,7 +10,5 @@ Hannu Krosing <hannu@2ndQuadrant.com>
 Cédric Villemain <cedric@2ndquadrant.com>
 Charles Duffy <charles@dyfis.net>
 Daniel Farina <daniel@heroku.com>
-Shawn Ellis <shawn.ellis17@gmail.com>
-Jay Taylor <jay@jaytaylor.com>
-Christian Kruse <christian@2ndQuadrant.com>
-Krzysztof Gajdemski <songo@debian.org.pl>
+Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
+Carlo Ascani <carlo.ascani@2ndquadrant.it>
--- a/37
+++ b/37
@@ -1,38 +1,3 @@
-2.0.1	2014-07-16
-		Documentation fixes and new QUICKSTART file (Ian)
-		Explicitly specify directories to ignore when cloning (Ian)
-		Fix log level for some log messages (Ian)
-		RHEL/CentOS specfile, init script and Makefile fixes (Nathan Van Overloop)
-        Debian init script and config file documentation fixes (József Kószó)
-		Typo fixes (Riegie Godwin Jeyaranchen, PriceChild)
-
-2.0stable 2014-01-30
-        Documentation fixes (Christian)
-        General refactoring, code quality improvements and stabilization work (Christian)
-        Added proper daemonizing (-d/--daemonize) (Christian)
-        Added PID file handling (-p/--pid-file) (Christian)
-        New config option: monitor_interval_secs (Christian)
-        New config option: retry_promote_interval (Christian)
-        New config option: logfile (Christian)
-        New config option: pg_bindir (Christian)
-        New config option: pgctl_options (Christian)
-
-2.0beta2 2013-12-19
-        Improve autofailover logic and algorithms (Jaime, Andres)
-        Ignore pg_log when cloning (Jaime)
-        Add timestamps to log line in stderr (Christian)
-        Correctly check wal_keep_segments (Jay Taylor)
-        Add a ssh_options parameter (Jay Taylor)
-
-2.0beta1 2012-07-27
-        Make CLONE command try to make an exact copy including $PGDATA location (Cedric) 
-        Add detection of master failure (Jaime)
-        Add the notion of a witness server (Jaime)
-        Add autofailover capabilities (Jaime)
-        Add a configuration parameter to indicate the script to execute on failover or follow (Jaime)
-        Make the monitoring optional and turned off by default, it can be turned on with --monitoring-history switch (Jaime)
-        Add tunables to specify number of retries to reconnect to master and the time between them (Jaime)
-
 1.2.0	2012-07-27
 		Test ssh connection before trying to rsync (Cédric)
        Add CLUSTER SHOW command (Carlo)
@@ -44,7 +9,7 @@
 1.1.1	2012-04-18
        Add --ignore-rsync-warning (Cédric)
        Add strnlen for compatibility with OS X (Greg)
-        Improve performance of the repl_status view (Jaime)
+        Improve performance of repl_status view (Jaime) 
        Remove last argument from log_err (Jaime, Reported by Jeroen Dekkers)
        Complete documentation about possible error conditions (Jaime)
        Document how to clean history (Jaime)
--- a/38
+++ b/38
@@ -1,6 +1,6 @@
 #
 # Makefile
-# Copyright (c) 2ndQuadrant, 2010-2014
+# Copyright (c) 2ndQuadrant, 2010-2011

 repmgrd_OBJS = dbutils.o config.o repmgrd.o log.o strutil.o
 repmgr_OBJS = dbutils.o check_dir.o config.o repmgr.o log.o strutil.o
@@ -11,18 +11,15 @@ PG_CPPFLAGS = -I$(libpq_srcdir)
 PG_LIBS = $(libpq_pgport)

 all:  repmgrd repmgr
-	$(MAKE) -C sql

 repmgrd: $(repmgrd_OBJS)
 	$(CC) $(CFLAGS) $(repmgrd_OBJS) $(PG_LIBS) $(LDFLAGS) $(LDFLAGS_EX) $(LIBS) -o repmgrd
-	$(MAKE) -C sql

 repmgr: $(repmgr_OBJS)
 	$(CC) $(CFLAGS) $(repmgr_OBJS) $(PG_LIBS) $(LDFLAGS) $(LDFLAGS_EX) $(LIBS) -o repmgr

 ifdef USE_PGXS
-PG_CONFIG = pg_config
-PGXS := $(shell $(PG_CONFIG) --pgxs)
+PGXS := $(shell pg_config --pgxs)
 include $(PGXS)
 else
 subdir = contrib/repmgr
@@ -33,26 +30,9 @@ endif

 # XXX: Try to use PROGRAM construct (see pgxs.mk) someday. Right now
 # is overriding pgxs install.
-install: install_prog install_ext
-
-install_prog:
-	mkdir -p '$(DESTDIR)$(bindir)'
-	$(INSTALL_PROGRAM) repmgrd$(X) '$(DESTDIR)$(bindir)/'
-	$(INSTALL_PROGRAM) repmgr$(X) '$(DESTDIR)$(bindir)/'
-
-install_ext:
-	$(MAKE) -C sql install
-
-install_rhel:
-	mkdir -p '$(DESTDIR)/etc/init.d/'
-	$(INSTALL_PROGRAM) RHEL/repmgrd.init '$(DESTDIR)/etc/init.d/repmgrd'
-	mkdir -p '$(DESTDIR)/etc/sysconfig/'
-	$(INSTALL_PROGRAM) RHEL/repmgrd.sysconfig '$(DESTDIR)/etc/sysconfig/repmgrd'
-	mkdir -p '$(DESTDIR)/etc/repmgr/'
-	$(INSTALL_PROGRAM) repmgr.conf.sample '$(DESTDIR)/etc/repmgr/'
-	mkdir -p '$(DESTDIR)/usr/bin/'
-	$(INSTALL_PROGRAM) repmgrd$(X) '$(DESTDIR)/usr/bin/'
-	$(INSTALL_PROGRAM) repmgr$(X) '$(DESTDIR)/usr/bin/'
+install:
+	$(INSTALL_PROGRAM) repmgrd$(X) '$(DESTDIR)$(bindir)'
+	$(INSTALL_PROGRAM) repmgr$(X) '$(DESTDIR)$(bindir)'

 ifneq (,$(DATA)$(DATA_built))
 	@for file in $(addprefix $(srcdir)/, $(DATA)) $(DATA_built); do \
@@ -65,18 +45,10 @@ clean:
 	rm -f *.o
 	rm -f repmgrd
 	rm -f repmgr
-	$(MAKE) -C sql clean

 deb: repmgrd repmgr
 	mkdir -p ./debian/usr/bin
 	cp repmgrd repmgr ./debian/usr/bin/
-	mkdir -p ./debian/usr/share/postgresql/9.0/contrib/
-	cp sql/repmgr_funcs.sql ./debian/usr/share/postgresql/9.0/contrib/
-	cp sql/uninstall_repmgr_funcs.sql ./debian/usr/share/postgresql/9.0/contrib/
-	mkdir -p ./debian/usr/lib/postgresql/9.0/lib/
-	cp sql/repmgr_funcs.so ./debian/usr/lib/postgresql/9.0/lib/
 	dpkg-deb --build debian
 	mv debian.deb ../postgresql-repmgr-9.0_1.0.0.deb
-	rm -rf ./debian/usr
-

--- a/QUICKSTART.md
+++ b/QUICKSTART.md
@@ -1,286 +0,0 @@
-repmgr: Quickstart guide
-========================
-
-repmgr is an open-source tool suite for mananaging replication and failover
-among multiple PostgreSQL server nodes. It enhances PostgreSQL's built-in
-hot-standby capabilities with a set of administration tools for monitoring
-replication, setting up standby servers and performing failover/switchover
-operations.
-
-This quickstart guide assumes you are familiar with PostgreSQL replication
-setup and Linux/UNIX system administration. For a more detailed tutorial
-covering setup on a variety of different systems, see the README.rst file.
-
-Conceptual Overview
-------------------
-
-repmgr provides two binaries:
-
- - `repmgr`: a command-line client to manage replication and repmgr configuration
- - `repmgrd`: an optional daemon process which runs on standby nodes to monitor
-   replication and node status
-
-Each PostgreSQL node requires a repmgr configuration file; additionally
-it must be "registered" using the repmgr command-line client. repmgr stores
-information about managed nodes in a custom schema on the node's current master
-database.
-
-
-Requirements
------------
-
-repmgr works with PostgreSQL 9.0 and later. All server nodes must be running the
-same PostgreSQL major version, and preferably should be running the same minor
-version.
-
-repmgr will work on any Linux or UNIX-like environment capable of running
-PostgreSQL. `rsync` must also be installed.
-
-
-Installation
------------
-
-repmgr must be installed on each PostgreSQL server node.
-
-* Packages
- - RPM packages for RedHat-based distributions are available from PGDG
- - Debian/Ubuntu provide .deb packages.
-
-  It is also possible to build .deb packages directly from the repmgr source;
-  see README.rst for further details.
-
-* Source installation
- - repmgr source code is hosted at github (https://github.com/2ndQuadrant/repmgr);
-   tar.gz files can be downloaded from https://github.com/2ndQuadrant/repmgr/releases .
-
-   repmgr can be built easily using PGXS:
-
-       sudo make USE_PGXS=1 install
-
-
-Configuration
-------------
-
-### Server configuration
-
-Password-less SSH logins must be enabled for the database system user (typically `postgres`)
-between all server nodes to enable repmgr to copy required files.
-
-### PostgreSQL configuration
-
-The master PostgreSQL node needs to be configured for replication with the
-following settings:
-
-    wal_level = 'hot_standby'      # minimal, archive, hot_standby, or logical
-    archive_mode = on              # allows archiving to be done
-    archive_command = 'cd .'       # command to use to archive a logfile segment
-    max_wal_senders = 10           # max number of walsender processes
-    wal_keep_segments = 5000       # in logfile segments, 16MB each; 0 disables
-    hot_standby = on               # "on" allows queries during recovery
-
-Note that repmgr expects a default of 5000 wal_keep_segments, although this
-value can be overridden when executing the `repmgr` client.
-
-Additionally, repmgr requires a dedicated PostgreSQL superuser account
-and a database in which to store monitoring and replication data. The
-database can in principle be any database, including the default postgres
-one, however it's probably advisable to create a dedicated repmgr database.
-
-
-### repmgr configuration
-
-Each PostgreSQL node requires a repmgr configuration file containing
-identification and database connection information:
-
-    cluster=test
-    node=1
-    node_name=node1
-    conninfo='host=repmgr_node1 user=repmgr_usr dbname=repmgr_db'
-    pg_bindir=/path/to/postgres/bin
-
-* `cluster`: common name for the replication cluster; this must be the same on all nodes
-* `node`: a unique, abitrary integer identifier
-* `name`: a unique, human-readable name
-* `conninfo`: a standard conninfo string enabling repmgr to connect to the
-   control database; user and name must be the same on all nodes, while other
-   parameters such as port may differ. The `host` parameter *must* be a hostname
-   resolvable by all nodes on the cluster.
-* `pg_bindir`: (optional) location of PostgreSQL binaries, if not in the default $PATH
-
-Note that the configuration file should *not* be stored inside the PostgreSQL
-data directory.
-
-Each node configuration needs to be registered with repmgr, either using the
-`repmgr` command line tool, or the `repmgrd` daemon; for details see below. Details
-about each node are inserted into the repmgr database (for details see below).
-
-
-Replication setup and monitoring
--------------------------------
-
-For the purposes of this guide, we'll assume the database user will be
-`repmgr_usr` and the database will be `repmgr_db`, and that the following
-environment variables are set on each node:
-
- - $HOME: the PostgreSQL system user's home directory
- - $PGDATA: the PostgreSQL data directory
-
-
-Master setup
------------
-
-1. Configure PostgreSQL
-
-  - create user and database:
-
-	```
-	CREATE ROLE repmgr_usr LOGIN SUPERUSER;
-	CREATE DATABASE repmgr_db OWNER repmgr_usr;
-	```
-
-  - configure postgresql.conf for replication (see above)
-
-  - update pg_hba.conf:
-
-	```
-	host    repmgr_usr      repmgr_db   192.168.1.0/24         trust
-	host    replication     all         192.168.1.0/24         trust
-	```
-
-    Restart the PostgreSQL server after making these changes.
-2. Create the repmgr configuration file:
-
-        $ cat $HOME/repmgr/repmgr.conf
-        cluster=test
-        node=1
-        node_name=node1
-        conninfo='host=repmgr_node1 user=repmgr_usr dbname=repmgr_db'
-        pg_bindir=/path/to/postgres/bin
-
-3. Register the master node with repmgr:
-
-        $ repmgr -f $HOME/repmgr/repmgr.conf --verbose master register
-        [2014-07-04 10:43:42] [INFO] repmgr mgr connecting to master database
-        [2014-07-04 10:43:42] [INFO] repmgr connected to master, checking its state
-        [2014-07-04 10:43:42] [INFO] master register: creating database objects inside the repmgr_test schema
-        [2014-07-04 10:43:43] [NOTICE] Master node correctly registered for cluster test with id 1 (conninfo: host=localhost user=repmgr_usr dbname=repmgr_db)
-
-
-Slave/standby setup
-------------------
-
-1. Use repmgr to clone the master:
-
-        $ repmgr -f $HOME/repmgr/repmgr.conf -D $PGDATA -d repmgr_db -U repmgr_usr -R postgres --verbose standby clone 192.168.1.2
-        Opening configuration file: ./repmgr.conf
-        [2014-07-04 10:49:00] [ERROR] Did not find the configuration file './repmgr.conf', continuing
-        [2014-07-04 10:49:00] [INFO] repmgr connecting to master database
-        [2014-07-04 10:49:00] [INFO] repmgr connected to master, checking its state
-        [2014-07-04 10:49:00] [INFO] Successfully connected to primary. Current installation size is 1807 MB
-        [2014-07-04 10:49:00] [NOTICE] Starting backup...
-        [2014-07-04 10:49:00] [INFO] creating directory "/path/to/data/"...
-        (...)
-        [2014-07-04 10:53:19] [NOTICE] Finishing backup...
-        NOTICE:  pg_stop_backup complete, all required WAL segments have been archived
-        [2014-07-04 10:53:21] [INFO] repmgr requires primary to keep WAL files 0000000100000000000000AD until at least 0000000100000000000000AD
-        [2014-07-04 10:53:21] [NOTICE] repmgr standby clone complete
-        [2014-07-04 10:53:21] [NOTICE] HINT: You can now start your postgresql server
-        [2014-07-04 10:53:21] [NOTICE] for example : /etc/init.d/postgresql start
-
-  -R is the database system user on the master node. At this point it does not matter
-  if the `repmgr.conf` file is not found.
-
-  This will clone the PostgreSQL database files from the master, and additionally
-  create an appropriate `recovery.conf` file.
-
-2. Start the PostgreSQL server
-
-3. Create the repmgr configuration file:
-
-        $ cat $HOME/repmgr/repmgr.conf
-        cluster=test
-        node=2
-        node_name=node2
-        conninfo='host=repmgr_node2 user=repmgr_usr dbname=repmgr_db'
-        pg_bindir=/path/to/postgres/bin
-
-4. Register the master node with repmgr:
-
-        $ repmgr -f $HOME/repmgr/repmgr.conf --verbose standby register
-        Opening configuration file: /path/to/repmgr/repmgr.conf
-        [2014-07-04 11:48:13] [INFO] repmgr connecting to standby database
-        [2014-07-04 11:48:13] [INFO] repmgr connected to standby, checking its state
-        [2014-07-04 11:48:13] [INFO] repmgr connecting to master database
-        [2014-07-04 11:48:13] [INFO] finding node list for cluster 'test'
-        [2014-07-04 11:48:13] [INFO] checking role of cluster node 'host=repmgr_node1 user=repmgr_usr dbname=repmgr_db'
-        [2014-07-04 11:48:13] [INFO] repmgr connected to master, checking its state
-        [2014-07-04 11:48:13] [INFO] repmgr registering the standby
-        [2014-07-04 11:48:13] [INFO] repmgr registering the standby complete
-        [2014-07-04 11:48:13] [NOTICE] Standby node correctly registered for cluster test with id 2 (conninfo: host=localhost user=repmgr_usr dbname=repmgr_db)
-
-Monitoring
----------
-
-`repmgrd` is a management and monitoring daemon which runs on standby nodes
-and which and can automate remote actions. It can be started simply with e.g.:
-
-    repmgrd -f $HOME/repmgr/repmgr.conf --verbose > $HOME/repmgr/repmgr.log 2>&1
-
-or alternatively:
-
-    repmgrd -f $HOME/repmgr/repmgr.conf --verbose --monitoring-history > $HOME/repmgr/repmgrd.log 2>&1
-
-which will track advance or lag of the replication in every standby in the
-`repl_monitor` table.
-
-Example log output:
-
-    [2014-07-04 11:55:17] [INFO] repmgrd Connecting to database 'host=localhost user=repmgr_usr dbname=repmgr_db'
-    [2014-07-04 11:55:17] [INFO] repmgrd Connected to database, checking its state
-    [2014-07-04 11:55:17] [INFO] repmgrd Connecting to primary for cluster 'test'
-    [2014-07-04 11:55:17] [INFO] finding node list for cluster 'test'
-    [2014-07-04 11:55:17] [INFO] checking role of cluster node 'host=repmgr_node1 user=repmgr_usr dbname=repmgr_db'
-    [2014-07-04 11:55:17] [INFO] repmgrd Checking cluster configuration with schema 'repmgr_test'
-    [2014-07-04 11:55:17] [INFO] repmgrd Checking node 2 in cluster 'test'
-    [2014-07-04 11:55:17] [INFO] Reloading configuration file and updating repmgr tables
-    [2014-07-04 11:55:17] [INFO] repmgrd Starting continuous standby node monitoring
-
-
-Failover
--------
-
-To promote a standby to master, on the standby execute e.g.:
-
-    repmgr -f  $HOME/repmgr/repmgr.conf --verbose standby promote
-
-repmgr will attempt to connect to the current master to verify that it
-is not available (if it is, repmgr will not promote the standby).
-
-Other standby servers need to be told to follow the new master with:
-
-    repmgr -f  $HOME/repmgr/repmgr.conf --verbose standby follow
-
-See file `autofailover_quick_setup.rst` for details on setting up
-automated failover.
-
-
-repmgr database schema
----------------------
-
-repmgr creates a small schema for its own use in the database specified in
-each node's conninfo configuration parameter. This database can in principle
-be any database. The schema name is the global `cluster` name prefixed
-with `repmgr_`, so for the example setup above the schema name is
-`repmgr_test`.
-
-The schema contains two tables:
-
-* `repl_nodes`
-  stores information about all registered servers in the cluster
-* `repl_monitor`
-  stores monitoring information about each node
-
-and one view, `repl_status`, which summarizes the latest monitoring information
-for each node.
-
-
--- a/README.rst
+++ b/README.rst
@@ -5,7 +5,7 @@ repmgr: Replication Manager for PostgreSQL clusters
 Introduction
 ============

-PostgreSQL 9+ allow us to have replicated Hot Standby servers
+PostgreSQL 9.0 allow us to have replicated Hot Standby servers 
 which we can query and/or use for high availability.

 While the main components of the feature are included with
@@ -20,17 +20,6 @@ databases as a single cluster.  repmgr includes two components:
 * repmgrd: management and monitoring daemon that watches the cluster
  and can automate remote actions.

-Supported Releases
------------------
-
-repmgr works with PostgreSQL versions 9.0 and later.
-
-There are currently no incompatibilities when upgrading repmgr from 9.0 to 9.1,
-so your 9.0 configuration will work with 9.1
-
-Additional parameters must be added to postgresql.conf to take advantage of
-the new 9.1 features such as synchronous replication or hot standby feedback.
-
 Requirements
 ------------

@@ -77,7 +66,7 @@ and run::
  
 And if a previously failed node becomes available again, such as
 the lost node1 above, you can get it to resynchronize by only copying
-over changes made while it was down.  That happens with what's
+over changes made while it was down using.  That hapens with what's
 called a forced clone, which overwrites existing data rather than
 assuming it starts with an empty database directory tree::

@@ -131,19 +120,19 @@ If you need to remove the source code temporary files from this directory,
 that can be done like this::

  make USE_PGXS=1 clean
-
+  
 See below for building notes specific to RedHat Linux variants.

 Using a full source code tree
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 In this method, the repmgr distribution is copied into the PostgreSQL source
-code tree, assumed to be under ${postgresql_sources} for this example.
+code tree, assumed to be at the ${postgresql_sources} for this example.
 The resulting subdirectory must be named ``contrib/repmgr``, without any
 version number::

  cp repmgr.tar.gz ${postgresql_sources}/contrib
-  cd ${postgresql_sources}/contrib
+  cd ${postgresql_sources}/contrib 
  tar xvzf repmgr-1.0.tar.gz
  cd repmgr
  make
@@ -237,7 +226,7 @@ If you already tried to build repmgr before doing this, you'll need to do::

    make USE_PGXS=1 clean

-to get rid of leftover files from the wrong architecture.
+To get rid of leftover files from the wrong architecture.

 Notes on Ubuntu, Debian or other Debian-based Builds
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -279,8 +268,8 @@ Confirm software was built correctly
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 You should now find the repmgr programs available in the subdirectory where
-the rest of your PostgreSQL binary files are located.  You can confirm the
-software is available by checking its version::
+the rest of your PostgreSQL installation is at.  You can confirm the software
+is available by checking its version::

  repmgr --version
  repmgrd --version
@@ -320,7 +309,7 @@ keys and a maching authorization file to a privledged user on the other system::
  [postgres@node1]$ cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
  [postgres@node1]$ chmod go-rwx ~/.ssh/*
  [postgres@node1]$ cd ~/.ssh
-  [postgres@node1]$ scp id_rsa.pub id_rsa authorized_keys user@node2:
+  [postgres@node1]$ scp id_rsa.pub id_rsa authorized_keys postgres@node2:

 Login as a user on the other system, and install the files into the postgres 
 user's account::
@@ -374,10 +363,10 @@ Usage walkthrough
 This assumes you've already followed the steps in "Installation Outline" to
 install repmgr and repmgrd on the system.

-A typical production installation of ``repmgr`` might involve two PostgreSQL
-instances on seperate servers, both running under the ``postgres`` user account
-and both using the default port (5432). This walkthrough assumes the following
-setup:
+A normal production installation of ``repmgr`` will normally involve two
+different systems running on the same port, typically the default of 5432, 
+with both using files owned by the ``postgres`` user account.  This
+walkthrough assumes the following setup:

 * A primary (master) server called "node1," running as the "postgres" user 
  who is also the owner of the files. This server is operating on port 5432.  This
@@ -389,7 +378,7 @@ setup:

 * Another standby server called "node3" with a similar configuration to "node2".

-* The Postgres installation in each of the above is defined as $PGDATA, 
+* The Postgress installation in each of the above is defined as $PGDATA, 
  which is represented here as ``/var/lib/pgsql/9.0/data``
  
 Creating some sample data
@@ -514,14 +503,12 @@ following the standard directory structure of a RHEL system.  It should contain:

  cluster=test
  node=1
-  node_name=earth
  conninfo='host=node1 user=repmgr dbname=pgbench'

 On "node2" create the file ``/var/lib/pgsql/repmgr/repmgr.conf`` with::

  cluster=test
  node=2
-  node_name=mars
  conninfo='host=node2 user=repmgr dbname=pgbench'

 The STANDBY CLONE process should have created a recovery.conf file on
@@ -625,18 +612,18 @@ Now restore to the original configuration by stopping
 primary server, then bringing up "node2" as a standby with a valid
 ``recovery.conf`` file.

-Stop the "node2" server and type the following on "node1" server::
+Stop the "node2" server::

  repmgr -f /var/lib/pgsql/repmgr/repmgr.conf standby promote

-Now the original primary, "node1", is acting again as primary.
+Now the original primary, "node1" is acting again as primary.

-Start the "node2" server and type this on "node2"::
+Start the "node2" server and type this on "node1"::

  repmgr standby clone --force -h node2 -p 5432 -U postgres -R postgres --verbose

-Verify the roles have reversed by attempting to insert a record on "node1"
-and on "node2".
+Verify the roles have reversed by attempting to insert a record on "node"
+and on "node1".

 The servers are now again acting as primary on "node1" and standby on "node2".

@@ -660,7 +647,7 @@ You can usually leave out changes to the port number in this case too.

 * A database exists on "prime" called "testdb."

-* The Postgres installation in each of the above is defined as $PGDATA, 
+* The Postgress installation in each of the above is defined as $PGDATA, 
  which is represented here with ``/data/prime`` as the "prime" server and 
  ``/data/standby`` as the "standby" server.

@@ -714,14 +701,12 @@ and it should contain::

  cluster=test
  node=1
-  node_name=earth
  conninfo='host=127.0.0.1 dbname=testdb'

 On "standby" create the file ``/home/standby/repmgr/repmgr.conf`` with::

  cluster=test
  node=2
-  node_name=mars
  conninfo='host=127.0.0.1 dbname=testdb'

 Next, with "prime" server running, we want to use the ``clone standby`` command
@@ -839,11 +824,12 @@ Also, if you don't do anything about it the monitor history will keep growing.
 For both of those reasons you sometime want to make some maintainance of the 
 ``repl_monitor`` table.

-If you want to clean the history after a few days you can execute the  
-CLUSTER CLEANUP command in a cron. For example to keep just one day of history
+If you want to clean the history after a few days you can execute a 
+truncate/delete (wheter you want to completely clean history or want to keep
+a few days of history) in a cron. For example to keep just one day of history
 you can put this in your crontab::

-0 1 * * *   repmgr cluster cleanup -k 1 -f ~/repmgr.conf
+0 1 * * *   psql -c "DELETE FROM repmgr_schema.repl_monitor where now() - last_monitor_time >= '1 day'::interval;" postgres

 Configuration and command reference
 ===================================
@@ -876,6 +862,7 @@ The output from this program looks like this::
  Usage:
   repmgr [OPTIONS] master  {register}
   repmgr [OPTIONS] standby {register|clone|promote|follow}
+   repmgr [OPTIONS] cluster {show|cleanup}

  General options:
    --help                     show this help, then exit
@@ -890,11 +877,12 @@ The output from this program looks like this::

  Configuration options:
    -D, --data-dir=DIR         local directory where the files will be copied to
-    -f, --config-file=PATH     path to the configuration file
+    -f, --config_file=PATH     path to the configuration file
    -R, --remote-user=USERNAME database server username for rsync
    -w, --wal-keep-segments=VALUE  minimum value for the GUC wal_keep_segments (default: 5000)
-    -I, --ignore-rsync-warning ignore rsync partial transfer warning
    -F, --force                force potentially dangerous operations to happen
+    -I, --ignore-rsync-warning Ignore partial transfert warning
+    -k, --keep-history         keeps indicated number of days of history

  repmgr performs some tasks like clone a node, promote it or making follow another node and then exits.
  COMMANDS:
@@ -903,6 +891,8 @@ The output from this program looks like this::
   standby clone [node]  - allows creation of a new standby
   standby promote       - allows manual promotion of a specific standby into a new master in the event of a failover
   standby follow        - allows the standby to re-point itself to a new master
+   cluster show          - print node informations
+   cluster cleanup       - cleans monitor's history

 The ``--verbose`` option can be useful in troubleshooting issues with
 the program.
@@ -1013,8 +1003,7 @@ The output from this program looks like this::
    --help                    show this help, then exit
    --version                 output version information, then exit
    --verbose                 output verbose activity information
-    --monitoring-history      track advance or lag of the replication in every standby in repl_monitor
-    -f, --config-file=PATH    path to the configuration file
+    -f, --config_file=PATH    database to connect to
  
  repmgrd monitors a cluster of servers.

@@ -1044,10 +1033,6 @@ Lag monitoring
 repmgrd helps monitor a set of master and standby servers.  You can
 see which node is the current master, as well as how far behind each
 is from current.
-To activate the monitor capabilities of repmgr you must include the
-option --monitoring-history when running it::
-
-  repmgrd --monitoring-history --config-file=/path/to/repmgr.conf &

 To look at the current lag between primary and each node listed
 in ``repl_node``, consult the ``repl_status`` view::
@@ -1080,21 +1065,16 @@ following
 * ERR_DB_QUERY 7:  Error executing a database query.
 * ERR_PROMOTED 8:  Exiting program because the node has been promoted to master.
 * ERR_BAD_PASSWORD 9:  Password used to connect to a database was rejected.
+* ERR_STR_OVERFLOW 10: A string was larger than expected.

 License and Contributions
 =========================

 repmgr is licensed under the GPL v3.  All of its code and documentation is
-Copyright 2010-2014, 2ndQuadrant Limited.  See the files COPYRIGHT and LICENSE for
+Copyright 2010-2011, 2ndQuadrant Limited.  See the files COPYRIGHT and LICENSE for
 details.

-Main sponsorship of repmgr has been from 2ndQuadrant customers.
-
-Additional work has been sponsored by the 4CaaST project for cloud computing,
-which has received funding from the European Union's Seventh Framework Programme
-(FP7/2007-2013) under grant agreement 258862.
-
-Contributions to repmgr are welcome, and will be listed in the file CREDITS.
+Contributions to repmgr are welcome, and listed in the file CREDITS.
 2ndQuadrant Limited requires that any contributions provide a copyright
 assignment and a disclaimer of any work-for-hire ownership claims from the
 employer of the developer.  This lets us make sure that all of the repmgr
@@ -1110,35 +1090,3 @@ Code in repmgr is formatted to a consistent style using the following command::

 Contributors should reformat their code similarly before submitting code to
 the project, in order to minimize merge conflicts with other work.
-
-Support and Assistance
-======================
-
-2ndQuadrant provides 24x7 production support for repmgr, as well as help you
-configure it correctly, verify an installation and train you in running a
-robust replication cluster.
-
-There is a mailing list/forum to discuss contributions or issues
-http://groups.google.com/group/repmgr
-
-#repmgr is registered in freenode IRC
-
-Further information is available at http://www.repmgr.org/
-
-We'd love to hear from you about how you use repmgr. Case studies and
-news are always welcome. Send us an email at info@2ndQuadrant.com, or
-send a postcard to
-
-repmgr
-c/o 2ndQuadrant
-7200 The Quorum
-Oxford Business Park North
-Oxford
-OX4 2JZ
-
-Thanks from the repmgr core team
-
-Jaime Casanova
-Simon Riggs
-Greg Smith
-Cedric Villemain
--- a/RHEL/repmgr.spec
+++ b/RHEL/repmgr.spec
@@ -1,57 +0,0 @@
-Summary: repmgr
-Name: repmgr
-Version: 2.0
-Release: 2
-License: GPLv3
-Group: System Environment/Daemons
-URL: http://repmgr.org 
-Packager: Nathan Van Overloop <nathan.van.overloop@nexperteam.be>
-Vendor: 2ndQuadrant Limited
-Distribution: centos
-Source0: %{name}-%{version}.tar.gz
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
-
-%description
-repmgr for centos6
-
-%prep
-%setup
-
-%build
-export PATH=$PATH:/usr/pgsql-9.3/bin/
-%{__make} USE_PGXS=1
-
-%install
-[ "%{buildroot}" != "/" ] && %{__rm} -rf %{buildroot}
-
-export PATH=$PATH:/usr/pgsql-9.3/bin/
-%{__make} USE_PGXS=1 install DESTDIR=%{buildroot} INSTALL="install -p"
-%{__make} USE_PGXS=1 install_prog DESTDIR=%{buildroot} INSTALL="install -p"
-%{__make} USE_PGXS=1 install_rhel DESTDIR=%{buildroot} INSTALL="install -p"
-
-
-%clean
-[ "%{buildroot}" != "/" ] && %{__rm} -rf %{buildroot}
- 
-
-%files
-%defattr(-,root,root)
-/usr/bin/repmgr
-/usr/bin/repmgrd
-/usr/pgsql-9.3/bin/repmgr
-/usr/pgsql-9.3/bin/repmgrd
-/usr/pgsql-9.3/lib/repmgr_funcs.so
-/usr/pgsql-9.3/share/contrib/repmgr.sql
-/usr/pgsql-9.3/share/contrib/repmgr_funcs.sql
-/usr/pgsql-9.3/share/contrib/uninstall_repmgr.sql
-/usr/pgsql-9.3/share/contrib/uninstall_repmgr_funcs.sql
-%attr(0755,root,root)/etc/init.d/repmgrd 
-%attr(0644,root,root)/etc/sysconfig/repmgrd
-%attr(0644,root,root)/etc/repmgr/repmgr.conf.sample
-
-%changelog
-* Thu Jun 05 2014 Nathan Van Overloop <nathan.van.overloop@nexperteam.be> 2.0.2
- fix witness creation to create db and user if needed
-* Fri Apr 04 2014 Nathan Van Overloop <nathan.van.overloop@nexperteam.be> 2.0.1
- initial build for RHEL6
-
--- a/RHEL/repmgrd.init
+++ b/RHEL/repmgrd.init
@@ -1,114 +0,0 @@
-#!/bin/bash
-#
-# repmgrd	Start up the repmgrd daemon
-#		repmrgd (replication manager daemon)
-#
-# chkconfig: -  75 16
-# description: repmgrd is the repliation manager daemon \
-# The repmgrd replication management and monitoring daemon for PostgreSQL.
-
-### BEGIN INIT INFO
-# Provides: repmgrd
-# Required-Start:  $local_fs $remote_fs $network $syslog postgresql
-# Required-Stop:     $local_fs $remote_fs $network $syslog postgresql
-# Should-Start:	     $syslog postgresql-9.3
-# Should-Stop: $syslog postgresql-9.3
-# Short-Description: start and stop repmrgd
-# Description: Enable repmgrd replication management and monitoring daemon for PostgreSQL
-#	       this is used to monitor a postgresql cluster.
-### END INIT INFO
-
-# Source function library.
-. /etc/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-prog=repmgrd
-REPMGRD_ENABLED=yes
-REPMGRD_OPTS=
-REPMGRD_USER=postgres
-DAEMONIZE="-d"
-
-# pull in sysconfig settings
-[ -f /etc/sysconfig/repmgrd ] && . /etc/sysconfig/repmgrd
-
-LOCKFILE=/var/lock/subsys/$prog
-RETVAL=0
-
-case "$REPMGRD_ENABLED" in
-    [Yy]*)
-	#nothing to do here	
-	;;
-    *)
-	exit 2
-	;;
-esac
-
-
-if [ -z "$REPMGRD_OPTS" ]
-then
-    echo "Not starting $prog, REPMGRD_OPTS not set in /etc/sysconfig/$prog"
-    exit 2
-fi
-
-start() {
-	[ "$EUID" != "0" ] && exit 4
-        [ "$NETWORKING" = "no" ] && exit 1
-
-        # Start daemons.
-        echo -n $"Starting $prog: "
-        daemon --user $REPMGRD_USER $prog $DAEMONIZE $REPMGRD_OPTS
-        RETVAL=$?
-        echo
-        [ $RETVAL -eq 0 ] && touch $LOCKFILE
-        return $RETVAL
-}
-
-stop() {
-	[ "$EUID" != "0" ] && exit 4
-        echo -n $"Shutting down $prog: "
-        killproc $prog
-        RETVAL=$?
-        echo
-        [ $RETVAL -eq 0 ] && rm -f $LOCKFILE
-        return $RETVAL
-}
-status() {
-        if [ -f "$LOCKFILE" ]; then
-            echo "$prog is running"
-        else
-	    RETVAL=3
-            echo "$prog is stopped"
-        fi
-        return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-  start)
-        start
-        ;;
-  stop)
-        stop
-        ;;
-  status)
-        status $prog
-        ;;
-  restart|force-reload)
-        stop
-        start
-        ;;
-  try-restart|condrestart)
-        if status $prog > /dev/null; then
-            stop
-            start
-        fi
-        ;;
-  reload)
-        exit 3
-        ;;
-  *)
-        echo $"Usage: $0 {start|stop|status|restart|try-restart|force-reload}"
-        exit 2
-esac
--- a/RHEL/repmgrd.sysconfig
+++ b/RHEL/repmgrd.sysconfig
@@ -1,4 +0,0 @@
-#default sysconfig file for repmrgd
-#custom overrides can be placed here
-
-REPMGRD_OPTS="-f /etc/repmgr/repmgr.conf"
--- a/18
+++ b/18
@@ -1,18 +1,14 @@
 Known issues in repmgr
 ======================

+* The check for whether ``wal_keep_segments`` is considered large enough
+  does a string comparison rather than an integer one.  It can give both
+  false positive (setting is large enough but flagged as too small) and
+  false negative (setting is too small but not noted as such) errors.
+
 * When running repmgr against a remote machine, operations that start
  the database server using the ``pg_ctl`` command may accidentally
  terminate after their associated ssh session ends.

-Planned feature improvements
-============================
-
-* Timeline increases when promoting a standby
-
-* A better check which standby did receive most of the data
-
-* Make the fact that a standby may be delayed a factor in the voting
-  algorithm
-
-* include support for delayed standbys
+* After running repmgrd as a regular foreground application, hitting
+  control-C causes the program to crash.
--- a/autofailover_quick_setup.rst
+++ b/autofailover_quick_setup.rst
@@ -1,225 +0,0 @@
-=====================================================
- PostgreSQL Automatic Fail-Over - User Documentation
-=====================================================
-
-Automatic Failover
-==================
-
-repmgr allows setups for automatic failover when it detects the failure of the master node.
-Following is a quick setup for this.
-
-Installation
-============
-
-For convenience, we define:
-
-**node1**
-    is the hostname fully qualified of the Master server, IP 192.168.1.10
-**node2**
-    is the hostname fully qualified of the Standby server, IP 192.168.1.11
-**witness**
-    is the hostname fully qualified of the server used for witness, IP 192.168.1.12
-
-**Note:** It is not recommanded to use name defining status of a server like «masterserver»,
-this is a name leading to confusion once a failover take place and the Master is
-now on the «standbyserver».
-
-Summary
-------
-
-2 PostgreSQL servers are involved in the replication.  Automatic fail-over need
-to vote to decide what server it should promote, thus an odd number is required
-and a witness-repmgrd is installed in a third server where it uses a PostgreSQL
-cluster to communicate with other repmgrd daemons.
-
-1. Install PostgreSQL in all the servers involved (including the server used for
-   witness)
-
-2. Install repmgr in all the servers involved (including the server used for witness)
-
-3. Configure the Master PostreSQL
-
-4. Clone the Master to the Standby using "repmgr standby clone" command
-
-5. Configure repmgr in all the servers involved (including the server used for witness)
-
-6. Register Master and Standby nodes
-
-7. Initiate witness server
-
-8. Start the repmgrd daemons in all nodes
-
-**Note** A complete High-Availability design needs at least 3 servers to still have
-a backup node after a first failure.
-
-Install PostgreSQL
------------------
-
-You can install PostgreSQL using any of the recommended methods. You should ensure
-it's 9.0 or later.
-
-Install repmgr
--------------
-
-Install repmgr following the steps in the README file.
-
-Configure PostreSQL
-------------------
-
-Log in node1.
-
-Edit the file postgresql.conf and modify the parameters::
-
-  listen_addresses='*'
-  wal_level = 'hot_standby'
-  archive_mode = on
-  archive_command = 'cd .'	 # we can also use exit 0, anything that
-                             # just does nothing
-  max_wal_senders = 10
-  wal_keep_segments = 5000   # 80 GB required on pg_xlog
-  hot_standby = on
-  shared_preload_libraries = 'repmgr_funcs'
-
-Edit the file pg_hba.conf and add lines for the replication::
-
-  host     repmgr           repmgr      127.0.0.1/32            trust
-  host     repmgr           repmgr      192.168.1.10/30         trust
-  host     replication      all         192.168.1.10/30         trust
-
-**Note:** It is also possible to use a password authentication (md5), .pgpass file
-should be edited to allow connection between each node.
-
-Create the user and database to manage replication::
-
-  su - postgres
-  createuser -s repmgr
-  createdb -O repmgr repmgr
-  psql -f /usr/share/postgresql/9.0/contrib/repmgr_funcs.sql repmgr
-
-Restart the PostgreSQL server::
-
-  pg_ctl -D $PGDATA restart
-
-And check everything is fine in the server log.
-
-Create the ssh-key for the postgres user and copy it to other servers::
-
-  su - postgres
-  ssh-keygen             # /!\ do not use a passphrase /!\
-  cat ~/.ssh/id_rsa.pub > ~/.ssh/authorized_keys
-  chmod 600 ~/.ssh/authorized_keys
-  exit
-  rsync -avz ~postgres/.ssh/authorized_keys node2:~postgres/.ssh/
-  rsync -avz ~postgres/.ssh/authorized_keys witness:~postgres/.ssh/
-  rsync -avz ~postgres/.ssh/id_rsa* node2:~postgres/.ssh/
-  rsync -avz ~postgres/.ssh/id_rsa* witness:~postgres/.ssh/
-
-Clone Master
------------
-
-Log in node2.
-
-Clone the node1 (the current Master)::
-
-  su - postgres
-  repmgr -d repmgr -U repmgr -h node1 standby clone 
-
-Start the PostgreSQL server::
-
-  pg_ctl -D $PGDATA start
-
-And check everything is fine in the server log.
-
-Configure repmgr
----------------
-
-Log in each server and configure repmgr by editing the file
-/etc/repmgr/repmgr.conf::
-
-  cluster=my_cluster
-  node=1
-  node_name=earth
-  conninfo='host=192.168.1.10 dbname=repmgr user=repmgr'
-  master_response_timeout=60
-  reconnect_attempts=6
-  reconnect_interval=10
-  failover=automatic
-  promote_command='promote_command.sh'
-  follow_command='repmgr standby follow -f /etc/repmgr/repmgr.conf'
-
-**cluster**
-    is the name of the current replication.
-**node**
-    is the number of the current node (1, 2 or 3 in the current example).
-**node_name**
-    is an identifier for every node.
-**conninfo**
-    is used to connect to the local PostgreSQL server (where the configuration file is) from any node. In the witness server configuration it is needed to add a 'port=5499' to the conninfo.
-**master_response_timeout**
-    is the maximum amount of time we are going to wait before deciding the master has died and start failover procedure.
-**reconnect_attempts**
-    is the number of times we will try to reconnect to master after a failure has been detected and before start failover procedure.
-**reconnect_interval**
-    is the amount of time between retries to reconnect to master after a failure has been detected and before start failover procedure.
-**failover**
-    configure behavior: *manual* or *automatic*.
-**promote_command**
-    the command executed to do the failover (including the PostgreSQL failover itself). The command must return 0 on success.
-**follow_command**
-    the command executed to address the current standby to another Master. The command must return 0 on success.
-
-Register Master and Standby
---------------------------
-
-Log in node1.
-
-Register the node as Master::
-
-  su - postgres
-  repmgr -f /etc/repmgr/repmgr.conf master register
-
-Log in node2. Register it as a standby::
-
-  su - postgres
-  repmgr -f /etc/repmgr/repmgr.conf standby register
-
-Initialize witness server
-------------------------
-
-Log in witness.
-
-Initialize the witness server::
-
-  su - postgres
-  repmgr -d repmgr -U repmgr -h 192.168.1.10 -D $WITNESS_PGDATA -f /etc/repmgr/repmgr.conf witness create
-
-It needs information to connect to the master to copy the configuration of the cluster, also it needs to know where it should initialize it's own $PGDATA.
-As part of the procees it also ask for the superuser password so it can connect when needed.
-
-Start the repmgrd daemons
-------------------------
-
-Log in node2 and witness.
-
-	su - postgres
-	repmgrd -f /etc/repmgr/repmgr.conf > /var/log/postgresql/repmgr.log 2>&1
-
-**Note:** The Master does not need a repmgrd daemon.
-
-
-Suspend Automatic behavior
-==========================
-
-Edit the repmgr.conf of the node to remove from automatic processing and change::
-
-	failover=manual
-
-Then, signal repmgrd daemon::
-
-	su - postgres
-	kill -HUP `pidof repmgrd`
-
-Usage
-=====
-
-The repmgr documentation is in the README file (how to build, options, etc.)
--- a/check_dir.c
+++ b/check_dir.c
@@ -1,6 +1,6 @@
 /*
 * check_dir.c - Directories management functions
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -31,6 +31,8 @@
 #include "strutil.h"
 #include "log.h"

+static int mkdir_p(char *path, mode_t omode);
+
 /*
 * make sure the directory either doesn't exist or is empty
 * we use this function to check the new data directory and
@@ -44,9 +46,9 @@
 int
 check_dir(char *dir)
 {
-	DIR		   *chkdir;
-	struct dirent *file;
-	int			result = 1;
+	DIR        *chkdir;
+	struct 		dirent *file;
+	int         result = 1;

 	errno = 0;

@@ -58,7 +60,7 @@ check_dir(char *dir)
 	while ((file = readdir(chkdir)) != NULL)
 	{
 		if (strcmp(".", file->d_name) == 0 ||
-			strcmp("..", file->d_name) == 0)
+		        strcmp("..", file->d_name) == 0)
 		{
 			/* skip this and parent directory */
 			continue;
@@ -71,7 +73,6 @@ check_dir(char *dir)
 	}

 #ifdef WIN32
-
 	/*
 	 * This fix is in mingw cvs (runtime/mingwex/dirent.c rev 1.4), but not in
 	 * released version
@@ -83,29 +84,29 @@ check_dir(char *dir)
 	closedir(chkdir);

 	if (errno != 0)
-		return -1;				/* some kind of I/O error? */
+		return -1;          /* some kind of I/O error? */

 	return result;
 }


 /*
- * Create directory with error log message when failing
+ * Create directory
 */
 bool
-create_dir(char *dir)
+create_directory(char *dir)
 {
 	if (mkdir_p(dir, 0700) == 0)
 		return true;

 	log_err(_("Could not create directory \"%s\": %s\n"),
-			dir, strerror(errno));
+	        dir, strerror(errno));

 	return false;
 }

 bool
-set_dir_permissions(char *dir)
+set_directory_permissions(char *dir)
 {
 	return (chmod(dir, 0700) != 0) ? false : true;
 }
@@ -123,15 +124,15 @@ set_dir_permissions(char *dir)
 * note that on failure, the path arg has been modified to show the particular
 * directory level we had problems with.
 */
-int
+static int
 mkdir_p(char *path, mode_t omode)
 {
 	struct stat sb;
 	mode_t		numask,
-				oumask;
+	         oumask;
 	int			first,
-				last,
-				retval;
+	        last,
+	        retval;
 	char	   *p;

 	p = path;
@@ -150,8 +151,8 @@ mkdir_p(char *path, mode_t omode)
 				return 1;
 		}
 		else if (p[1] == ':' &&
-				 ((p[0] >= 'a' && p[0] <= 'z') ||
-				  (p[0] >= 'A' && p[0] <= 'Z')))
+		         ((p[0] >= 'a' && p[0] <= 'z') ||
+		          (p[0] >= 'A' && p[0] <= 'Z')))
 		{
 			/* local drive */
 			p += 2;
@@ -222,87 +223,10 @@ bool
 is_pg_dir(char *dir)
 {
 	const size_t buf_sz = 8192;
-	char		path[buf_sz];
-	struct stat sb;
-	int			r;
+	char		 path[buf_sz];
+	struct stat	 sb;

-	/* test pgdata */
 	xsnprintf(path, buf_sz, "%s/PG_VERSION", dir);
-	if (stat(path, &sb) == 0)
-		return true;

-	/* test tablespace dir */
-	sprintf(path, "ls %s/PG_*/ -I*", dir);
-	r = system(path);
-	if (r == 0)
-		return true;
-
-	return false;
-}
-
-
-bool
-create_pg_dir(char *dir, bool force)
-{
-	bool		pg_dir = false;
-
-	/* Check this directory could be used as a PGDATA dir */
-	switch (check_dir(dir))
-	{
-		case 0:
-			/* dir not there, must create it */
-			log_info(_("creating directory \"%s\"...\n"), dir);
-
-			if (!create_dir(dir))
-			{
-				log_err(_("couldn't create directory \"%s\"...\n"),
-						dir);
-				return false;
-			}
-			break;
-		case 1:
-			/* Present but empty, fix permissions and use it */
-			log_info(_("checking and correcting permissions on existing directory %s ...\n"),
-					 dir);
-
-			if (!set_dir_permissions(dir))
-			{
-				log_err(_("could not change permissions of directory \"%s\": %s\n"),
-						dir, strerror(errno));
-				return false;
-			}
-			break;
-		case 2:
-			/* Present and not empty */
-			log_warning(_("directory \"%s\" exists but is not empty\n"),
-						dir);
-
-			pg_dir = is_pg_dir(dir);
-
-			/*
-			 * we use force to reduce the time needed to restore a node which
-			 * turn async after a failover or anything else
-			 */
-			if (pg_dir && force)
-			{
-				/* Let it continue */
-				break;
-			}
-			else if (pg_dir && !force)
-			{
-				log_warning(_("\nThis looks like a PostgreSQL directory.\n"
-							  "If you are sure you want to clone here, "
-							  "please check there is no PostgreSQL server "
-							  "running and use the --force option\n"));
-				return false;
-			}
-
-			return false;
-		default:
-			/* Trouble accessing directory */
-			log_err(_("could not access directory \"%s\": %s\n"),
-					dir, strerror(errno));
-			return false;
-	}
-	return true;
+	return (stat(path, &sb) == 0) ? true : false;
 }
--- a/check_dir.h
+++ b/check_dir.h
@@ -1,6 +1,6 @@
 /*
 * check_dir.h
- * Copyright (c) 2ndQuadrant, 2010-2014
+ * Copyright (c) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -20,11 +20,9 @@
 #ifndef _REPMGR_CHECK_DIR_H_
 #define _REPMGR_CHECK_DIR_H_

-int			mkdir_p(char *path, mode_t omode);
-int			check_dir(char *dir);
-bool		create_dir(char *dir);
-bool		set_dir_permissions(char *dir);
-bool		is_pg_dir(char *dir);
-bool		create_pg_dir(char *dir, bool force);
+int  check_dir(char *dir);
+bool create_directory(char *dir);
+bool set_directory_permissions(char *dir);
+bool is_pg_dir(char *dir);

 #endif
--- a/config.c
+++ b/config.c
@@ -1,6 +1,6 @@
 /*
 * config.c - Functions to parse the config file
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -18,57 +18,36 @@
 */

 #include "config.h"
-#include "log.h"
-#include "strutil.h"
 #include "repmgr.h"
+#include "strutil.h"

 void
-parse_config(const char *config_file, t_configuration_options * options)
+parse_config(const char* config_file, t_configuration_options* options)
 {
-	char	   *s,
-				buff[MAXLINELENGTH];
-	char		name[MAXLEN];
-	char		value[MAXLEN];
+	char *s, buff[MAXLINELENGTH];
+	char name[MAXLEN];
+	char value[MAXLEN];

-	FILE	   *fp = fopen(config_file, "r");
+	FILE *fp = fopen (config_file, "r");

 	/* Initialize */
 	memset(options->cluster_name, 0, sizeof(options->cluster_name));
 	options->node = -1;
 	memset(options->conninfo, 0, sizeof(options->conninfo));
-	options->failover = MANUAL_FAILOVER;
-	options->priority = 0;
-	memset(options->node_name, 0, sizeof(options->node_name));
-	memset(options->promote_command, 0, sizeof(options->promote_command));
-	memset(options->follow_command, 0, sizeof(options->follow_command));
 	memset(options->rsync_options, 0, sizeof(options->rsync_options));
-	memset(options->ssh_options, 0, sizeof(options->ssh_options));
-	memset(options->pg_bindir, 0, sizeof(options->pg_bindir));
-	memset(options->pgctl_options, 0, sizeof(options->pgctl_options));
-
-	/* if nothing has been provided defaults to 60 */
-	options->master_response_timeout = 60;
-
-	/* it defaults to 6 retries with a time between retries of 10s */
-	options->reconnect_attempts = 6;
-	options->reconnect_intvl = 10;
-
-	options->monitor_interval_secs = 2;
-	options->retry_promote_interval_secs = 300;

 	/*
-	 * Since some commands don't require a config file at all, not having one
-	 * isn't necessarily a problem.
+	 * Since some commands don't require a config file at all, not
+	 * having one isn't necessarily a problem.
 	 */
 	if (fp == NULL)
 	{
-		log_err(_("Did not find the configuration file '%s', continuing\n"),
-				config_file);
+		fprintf(stderr, _("Did not find the configuration file '%s', continuing\n"), config_file);
 		return;
 	}

 	/* Read next line */
-	while ((s = fgets(buff, sizeof buff, fp)) != NULL)
+	while ((s = fgets (buff, sizeof buff, fp)) != NULL)
 	{
 		/* Skip blank lines and comments */
 		if (buff[0] == '\n' || buff[0] == '#')
@@ -79,138 +58,70 @@ parse_config(const char *config_file, t_configuration_options * options)

 		/* Copy into correct entry in parameters struct */
 		if (strcmp(name, "cluster") == 0)
-			strncpy(options->cluster_name, value, MAXLEN);
+			strncpy (options->cluster_name, value, MAXLEN);
 		else if (strcmp(name, "node") == 0)
 			options->node = atoi(value);
 		else if (strcmp(name, "conninfo") == 0)
-			strncpy(options->conninfo, value, MAXLEN);
+			strncpy (options->conninfo, value, MAXLEN);
 		else if (strcmp(name, "rsync_options") == 0)
-			strncpy(options->rsync_options, value, QUERY_STR_LEN);
-		else if (strcmp(name, "ssh_options") == 0)
-			strncpy(options->ssh_options, value, QUERY_STR_LEN);
+			strncpy (options->rsync_options, value, QUERY_STR_LEN);
 		else if (strcmp(name, "loglevel") == 0)
-			strncpy(options->loglevel, value, MAXLEN);
+			strncpy (options->loglevel, value, MAXLEN);
 		else if (strcmp(name, "logfacility") == 0)
-			strncpy(options->logfacility, value, MAXLEN);
-		else if (strcmp(name, "failover") == 0)
-		{
-			char		failoverstr[MAXLEN];
-
-			strncpy(failoverstr, value, MAXLEN);
-
-			if (strcmp(failoverstr, "manual") == 0)
-				options->failover = MANUAL_FAILOVER;
-			else if (strcmp(failoverstr, "automatic") == 0)
-				options->failover = AUTOMATIC_FAILOVER;
-			else
-			{
-				log_warning(_("value for failover option is incorrect, it should be automatic or manual. Defaulting to manual.\n"));
-				options->failover = MANUAL_FAILOVER;
-			}
-		}
-		else if (strcmp(name, "priority") == 0)
-			options->priority = atoi(value);
-		else if (strcmp(name, "node_name") == 0)
-			strncpy(options->node_name, value, MAXLEN);
-		else if (strcmp(name, "promote_command") == 0)
-			strncpy(options->promote_command, value, MAXLEN);
-		else if (strcmp(name, "follow_command") == 0)
-			strncpy(options->follow_command, value, MAXLEN);
-		else if (strcmp(name, "master_response_timeout") == 0)
-			options->master_response_timeout = atoi(value);
-		else if (strcmp(name, "reconnect_attempts") == 0)
-			options->reconnect_attempts = atoi(value);
-		else if (strcmp(name, "reconnect_interval") == 0)
-			options->reconnect_intvl = atoi(value);
-		else if (strcmp(name, "pg_bindir") == 0)
-			strncpy(options->pg_bindir, value, MAXLEN);
-		else if (strcmp(name, "pg_ctl_options") == 0)
-			strncpy(options->pgctl_options, value, MAXLEN);
-		else if (strcmp(name, "logfile") == 0)
-			strncpy(options->logfile, value, MAXLEN);
-		else if (strcmp(name, "monitor_interval_secs") == 0)
-			options->monitor_interval_secs = atoi(value);
-		else if (strcmp(name, "retry_promote_interval_secs") == 0)
-			options->retry_promote_interval_secs = atoi(value);
+			strncpy (options->logfacility, value, MAXLEN);
 		else
-			log_warning(_("%s/%s: Unknown name/value pair!\n"), name, value);
+			printf ("WARNING: %s/%s: Unknown name/value pair!\n", name, value);
 	}

 	/* Close file */
-	fclose(fp);
+	fclose (fp);

 	/* Check config settings */
-	if (*options->cluster_name == '\0')
+	if (strnlen(options->cluster_name, MAXLEN)==0)
 	{
-		log_err(_("Cluster name is missing. Check the configuration file.\n"));
+		fprintf(stderr, "Cluster name is missing. "
+		        "Check the configuration file.\n");
 		exit(ERR_BAD_CONFIG);
 	}

 	if (options->node == -1)
 	{
-		log_err(_("Node information is missing. Check the configuration file.\n"));
-		exit(ERR_BAD_CONFIG);
-	}
-
-	if (options->master_response_timeout <= 0)
-	{
-		log_err(_("Master response timeout must be greater than zero. Check the configuration file.\n"));
-		exit(ERR_BAD_CONFIG);
-	}
-
-	if (options->reconnect_attempts < 0)
-	{
-		log_err(_("Reconnect attempts must be zero or greater. Check the configuration file.\n"));
-		exit(ERR_BAD_CONFIG);
-	}
-
-	if (options->reconnect_intvl <= 0)
-	{
-		log_err(_("Reconnect intervals must be zero or greater. Check the configuration file.\n"));
-		exit(ERR_BAD_CONFIG);
-	}
-
-	if (*options->pg_bindir == '\0')
-	{
-		log_err(_("pg_bindir config value not found. Check the configuration file.\n"));
+		fprintf(stderr, "Node information is missing. "
+		        "Check the configuration file.\n");
 		exit(ERR_BAD_CONFIG);
 	}
 }

-
 char *
-trim(char *s)
+trim (char *s)
 {
 	/* Initialize start, end pointers */
-	char	   *s1 = s,
-			   *s2 = &s[strlen(s) - 1];
+	char *s1 = s, *s2 = &s[strlen (s) - 1];

 	/* Trim and delimit right side */
-	while ((isspace(*s2)) && (s2 >= s1))
+	while ( (isspace (*s2)) && (s2 >= s1) )
 		--s2;
-	*(s2 + 1) = '\0';
+	*(s2+1) = '\0';

 	/* Trim left side */
-	while ((isspace(*s1)) && (s1 < s2))
+	while ( (isspace (*s1)) && (s1 < s2) )
 		++s1;

 	/* Copy finished string */
-	memmove(s, s1, s2 - s1);
-	s[s2 - s1 + 1] = '\0';
-
+	strcpy (s, s1);
 	return s;
 }

 void
 parse_line(char *buff, char *name, char *value)
 {
-	int			i = 0;
-	int			j = 0;
+	int i = 0;
+	int j = 0;

 	/*
 	 * first we find the name of the parameter
 	 */
-	for (; i < MAXLEN; ++i)
+	for ( ; i < MAXLEN; ++i)
 	{
 		if (buff[i] != '=')
 			name[j++] = buff[i];
@@ -223,7 +134,7 @@ parse_line(char *buff, char *name, char *value)
 	 * Now the value
 	 */
 	j = 0;
-	for (++i; i < MAXLEN; ++i)
+	for ( ++i ; i < MAXLEN; ++i)
 		if (buff[i] == '\'')
 			continue;
 		else if (buff[i] != '\n')
@@ -233,100 +144,3 @@ parse_line(char *buff, char *name, char *value)
 	value[j] = '\0';
 	trim(value);
 }
-
-bool
-reload_config(char *config_file, t_configuration_options * orig_options)
-{
-	PGconn	   *conn;
-
-	t_configuration_options new_options;
-
-	/*
-	 * Re-read the configuration file: repmgr.conf
-	 */
-	log_info(_("Reloading configuration file and updating repmgr tables\n"));
-	parse_config(config_file, &new_options);
-	if (new_options.node == -1)
-	{
-		log_warning(_("Cannot load new configuration, will keep current one.\n"));
-		return false;
-	}
-
-	if (strcmp(new_options.cluster_name, orig_options->cluster_name) != 0)
-	{
-		log_warning(_("Cannot change cluster name, will keep current configuration.\n"));
-		return false;
-	}
-
-	if (new_options.node != orig_options->node)
-	{
-		log_warning(_("Cannot change node number, will keep current configuration.\n"));
-		return false;
-	}
-
-	if (strcmp(new_options.node_name, orig_options->node_name) != 0)
-	{
-		log_warning(_("Cannot change standby name, will keep current configuration.\n"));
-		return false;
-	}
-
-	if (new_options.failover != MANUAL_FAILOVER && new_options.failover != AUTOMATIC_FAILOVER)
-	{
-		log_warning(_("New value for failover is not valid. Should be MANUAL or AUTOMATIC.\n"));
-		return false;
-	}
-
-	if (new_options.master_response_timeout <= 0)
-	{
-		log_warning(_("New value for master_response_timeout is not valid. Should be greater than zero.\n"));
-		return false;
-	}
-
-	if (new_options.reconnect_attempts < 0)
-	{
-		log_warning(_("New value for reconnect_attempts is not valid. Should be greater or equal than zero.\n"));
-		return false;
-	}
-
-	if (new_options.reconnect_intvl < 0)
-	{
-		log_warning(_("New value for reconnect_interval is not valid. Should be greater or equal than zero.\n"));
-		return false;
-	}
-
-	/* Test conninfo string */
-	conn = establish_db_connection(new_options.conninfo, false);
-	if (!conn || (PQstatus(conn) != CONNECTION_OK))
-	{
-		log_warning(_("conninfo string is not valid, will keep current configuration.\n"));
-		return false;
-	}
-	PQfinish(conn);
-
-	/* Configuration seems ok, will load new values */
-	strcpy(orig_options->cluster_name, new_options.cluster_name);
-	orig_options->node = new_options.node;
-	strcpy(orig_options->conninfo, new_options.conninfo);
-	orig_options->failover = new_options.failover;
-	orig_options->priority = new_options.priority;
-	strcpy(orig_options->node_name, new_options.node_name);
-	strcpy(orig_options->promote_command, new_options.promote_command);
-	strcpy(orig_options->follow_command, new_options.follow_command);
-	strcpy(orig_options->rsync_options, new_options.rsync_options);
-	strcpy(orig_options->ssh_options, new_options.ssh_options);
-	orig_options->master_response_timeout = new_options.master_response_timeout;
-	orig_options->reconnect_attempts = new_options.reconnect_attempts;
-	orig_options->reconnect_intvl = new_options.reconnect_intvl;
-
-	/*
-	 * XXX These ones can change with a simple SIGHUP?
-	 *
-	 * strcpy (orig_options->loglevel, new_options.loglevel); strcpy
-	 * (orig_options->logfacility, new_options.logfacility);
-	 *
-	 * logger_shutdown(); XXX do we have progname here ? logger_init(progname,
-	 * orig_options.loglevel, orig_options.logfacility);
-	 */
-
-	return true;
-}
--- a/config.h
+++ b/config.h
@@ -1,6 +1,6 @@
 /*
 * config.h
- * Copyright (c) 2ndQuadrant, 2010-2014
+ * Copyright (c) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -25,33 +25,16 @@

 typedef struct
 {
-	char		cluster_name[MAXLEN];
-	int			node;
-	char		conninfo[MAXLEN];
-	int			failover;
-	int			priority;
-	char		node_name[MAXLEN];
-	char		promote_command[MAXLEN];
-	char		follow_command[MAXLEN];
-	char		loglevel[MAXLEN];
-	char		logfacility[MAXLEN];
-	char		rsync_options[QUERY_STR_LEN];
-	char		ssh_options[QUERY_STR_LEN];
-	int			master_response_timeout;
-	int			reconnect_attempts;
-	int			reconnect_intvl;
-	char		pg_bindir[MAXLEN];
-	char		pgctl_options[MAXLEN];
-	char		logfile[MAXLEN];
-	int			monitor_interval_secs;
-	int			retry_promote_interval_secs;
-}	t_configuration_options;
+	char cluster_name[MAXLEN];
+	int node;
+	char conninfo[MAXLEN];
+	char loglevel[MAXLEN];
+	char logfacility[MAXLEN];
+	char rsync_options[QUERY_STR_LEN];
+} t_configuration_options;

-#define T_CONFIGURATION_OPTIONS_INITIALIZER { "", -1, "", MANUAL_FAILOVER, -1, "", "", "", "", "", "", "", -1, -1, -1, "", "", "", 0, 0 }
-
-void		parse_config(const char *config_file, t_configuration_options * options);
-void		parse_line(char *buff, char *name, char *value);
-char	   *trim(char *s);
-bool		reload_config(char *config_file, t_configuration_options * orig_options);
+void parse_config(const char* config_file, t_configuration_options* options);
+void parse_line(char *buff, char *name, char *value);
+char *trim(char *s);

 #endif
--- a/dbutils.c
+++ b/dbutils.c
@@ -1,6 +1,6 @@
 /*
 * dbutils.c - Database connection/management functions
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -17,30 +17,21 @@
 *
 */

-#include <unistd.h>
-#include <time.h>
-#include <sys/time.h>
-
 #include "repmgr.h"
 #include "strutil.h"
 #include "log.h"

 PGconn *
-establish_db_connection(const char *conninfo, const bool exit_on_error)
+establishDBConnection(const char *conninfo, const bool exit_on_error)
 {
 	/* Make a connection to the database */
-	PGconn	   *conn = NULL;
-	char		connection_string[MAXLEN];
-
-	strcpy(connection_string, conninfo);
-	strcat(connection_string, " fallback_application_name='repmgr'");
-	conn = PQconnectdb(connection_string);
+	PGconn *conn = PQconnectdb(conninfo);

 	/* Check to see that the backend connection was successfully made */
 	if ((PQstatus(conn) != CONNECTION_OK))
 	{
 		log_err(_("Connection to database failed: %s\n"),
-				PQerrorMessage(conn));
+		        PQerrorMessage(conn));

 		if (exit_on_error)
 		{
@@ -53,17 +44,16 @@ establish_db_connection(const char *conninfo, const bool exit_on_error)
 }

 PGconn *
-establish_db_connection_by_params(const char *keywords[], const char *values[],
-								  const bool exit_on_error)
+establishDBConnectionByParams(const char *keywords[], const char *values[],const bool exit_on_error)
 {
 	/* Make a connection to the database */
-	PGconn	   *conn = PQconnectdbParams(keywords, values, true);
+	PGconn *conn = PQconnectdbParams(keywords, values, true);

 	/* Check to see that the backend connection was successfully made */
 	if ((PQstatus(conn) != CONNECTION_OK))
 	{
 		log_err(_("Connection to database failed: %s\n"),
-				PQerrorMessage(conn));
+		        PQerrorMessage(conn));
 		if (exit_on_error)
 		{
 			PQfinish(conn);
@@ -74,133 +64,58 @@ establish_db_connection_by_params(const char *keywords[], const char *values[],
 	return conn;
 }

-int
+bool
 is_standby(PGconn *conn)
 {
 	PGresult   *res;
-	int			result = 0;
+	bool		result;

 	res = PQexec(conn, "SELECT pg_is_in_recovery()");

-	if (res == NULL || PQresultStatus(res) != PGRES_TUPLES_OK)
-	{
-		log_err(_("Can't query server mode: %s"),
-				PQerrorMessage(conn));
-		result = -1;
-	}
-	else if (PQntuples(res) == 1 && strcmp(PQgetvalue(res, 0, 0), "t") == 0)
-		result = 1;
-
-	PQclear(res);
-	return result;
-}
-
-
-
-int
-is_witness(PGconn *conn, char *schema, char *cluster, int node_id)
-{
-	PGresult   *res;
-	int			result = 0;
-	char		sqlquery[QUERY_STR_LEN];
-
-	sqlquery_snprintf(sqlquery, "SELECT witness from %s.repl_nodes where cluster = '%s' and id = %d",
-					  schema, cluster, node_id);
-	res = PQexec(conn, sqlquery);
 	if (PQresultStatus(res) != PGRES_TUPLES_OK)
 	{
-		log_err(_("Can't query server mode: %s"), PQerrorMessage(conn));
-		result = -1;
+		log_err(_("Can't query server mode: %s"),
+		        PQerrorMessage(conn));
+		PQclear(res);
+		PQfinish(conn);
+		exit(ERR_DB_QUERY);
 	}
-	else if (PQntuples(res) == 1 && strcmp(PQgetvalue(res, 0, 0), "t") == 0)
-		result = 1;
+
+	if (strcmp(PQgetvalue(res, 0, 0), "f") == 0)
+		result = false;
+	else
+		result = true;

 	PQclear(res);
 	return result;
 }


-/* check the PQStatus and try to 'select 1' to confirm good connection */
-bool
-is_pgup(PGconn *conn, int timeout)
-{
-	char		sqlquery[QUERY_STR_LEN];
-
-	/* Check the connection status twice in case it changes after reset */
-	bool		twice = false;
-
-	/* Check the connection status twice in case it changes after reset */
-	for (;;)
-	{
-		if (PQstatus(conn) != CONNECTION_OK)
-		{
-			if (twice)
-				return false;
-			PQreset(conn);		/* reconnect */
-			twice = true;
-		}
-		else
-		{
-			/*
-			 * Send a SELECT 1 just to check if the connection is OK
-			 */
-			if (!cancel_query(conn, timeout))
-				goto failed;
-			if (wait_connection_availability(conn, timeout) != 1)
-				goto failed;
-
-			sqlquery_snprintf(sqlquery, "SELECT 1");
-			if (PQsendQuery(conn, sqlquery) == 0)
-			{
-				log_warning(_("PQsendQuery: Query could not be sent to primary. %s\n"),
-							PQerrorMessage(conn));
-				goto failed;
-			}
-			if (wait_connection_availability(conn, timeout) != 1)
-				goto failed;
-
-			break;
-
-	failed:
-
-			/*
-			 * we need to retry, because we might just have loose the
-			 * connection once
-			 */
-			if (twice)
-				return false;
-			PQreset(conn);		/* reconnect */
-			twice = true;
-		}
-	}
-	return true;
-}
-
-
 /*
 * If postgreSQL version is 9 or superior returns the major version
 * if 8 or inferior returns an empty string
 */
 char *
-pg_version(PGconn *conn, char *major_version)
+pg_version(PGconn *conn, char* major_version)
 {
-	PGresult   *res;
+	PGresult	*res;

-	int			major_version1;
-	char	   *major_version2;
+	int					 major_version1;
+	char				*major_version2;

 	res = PQexec(conn,
-				 "WITH pg_version(ver) AS "
-				 "(SELECT split_part(version(), ' ', 2)) "
-				 "SELECT split_part(ver, '.', 1), split_part(ver, '.', 2) "
-				 "FROM pg_version");
+	             "WITH pg_version(ver) AS "
+	             "(SELECT split_part(version(), ' ', 2)) "
+	             "SELECT split_part(ver, '.', 1), split_part(ver, '.', 2) "
+	             "FROM pg_version");

 	if (PQresultStatus(res) != PGRES_TUPLES_OK)
 	{
 		log_err(_("Version check PQexec failed: %s"),
-				PQerrorMessage(conn));
+		        PQerrorMessage(conn));
 		PQclear(res);
-		return NULL;
+		PQfinish(conn);
+		exit(ERR_DB_QUERY);
 	}

 	major_version1 = atoi(PQgetvalue(res, 0, 0));
@@ -210,7 +125,7 @@ pg_version(PGconn *conn, char *major_version)
 	{
 		/* form a major version string */
 		xsnprintf(major_version, MAXVERSIONSTR, "%d.%s", major_version1,
-				  major_version2);
+		          major_version2);
 	}
 	else
 		strcpy(major_version, "");
@@ -221,92 +136,59 @@ pg_version(PGconn *conn, char *major_version)
 }


-int
-guc_set(PGconn *conn, const char *parameter, const char *op,
-		const char *value)
+bool
+guc_setted(PGconn *conn, const char *parameter, const char *op,
+           const char *value)
 {
-	PGresult   *res;
+	PGresult	*res;
 	char		sqlquery[QUERY_STR_LEN];
-	int			retval = 1;

 	sqlquery_snprintf(sqlquery, "SELECT true FROM pg_settings "
-					  " WHERE name = '%s' AND setting %s '%s'",
-					  parameter, op, value);
+	                  " WHERE name = '%s' AND setting %s '%s'",
+	                  parameter, op, value);

 	res = PQexec(conn, sqlquery);
 	if (PQresultStatus(res) != PGRES_TUPLES_OK)
 	{
 		log_err(_("GUC setting check PQexec failed: %s"),
-				PQerrorMessage(conn));
-		retval = -1;
+		        PQerrorMessage(conn));
+		PQclear(res);
+		PQfinish(conn);
+		exit(ERR_DB_QUERY);
 	}
-	else if (PQntuples(res) == 0)
+	if (PQntuples(res) == 0)
 	{
-		retval = 0;
+		PQclear(res);
+		return false;
 	}
-
 	PQclear(res);

-	return retval;
-}
-
-/**
- * Just like guc_set except with an extra parameter containing the name of
- * the pg datatype so that the comparison can be done properly.
- */
-int
-guc_set_typed(PGconn *conn, const char *parameter, const char *op,
-			  const char *value, const char *datatype)
-{
-	PGresult   *res;
-	char		sqlquery[QUERY_STR_LEN];
-	int			retval = 1;
-
-	sqlquery_snprintf(sqlquery, "SELECT true FROM pg_settings "
-					  " WHERE name = '%s' AND setting::%s %s '%s'::%s",
-					  parameter, datatype, op, value, datatype);
-
-	res = PQexec(conn, sqlquery);
-	if (PQresultStatus(res) != PGRES_TUPLES_OK)
-	{
-		log_err(_("GUC setting check PQexec failed: %s"),
-				PQerrorMessage(conn));
-		retval = -1;
-	}
-	else if (PQntuples(res) == 0)
-	{
-		retval = 0;
-	}
-
-	PQclear(res);
-
-	return retval;
+	return true;
 }


 const char *
 get_cluster_size(PGconn *conn)
 {
-	PGresult   *res;
-	const char *size = NULL;
-	char		sqlquery[QUERY_STR_LEN];
+	PGresult	*res;
+	const char	*size;
+	char		 sqlquery[QUERY_STR_LEN];

 	sqlquery_snprintf(
-					  sqlquery,
-				 "SELECT pg_size_pretty(SUM(pg_database_size(oid))::bigint) "
-					  "	 FROM pg_database ");
+	    sqlquery,
+	    "SELECT pg_size_pretty(SUM(pg_database_size(oid))::bigint) "
+	    "	 FROM pg_database ");

 	res = PQexec(conn, sqlquery);
 	if (PQresultStatus(res) != PGRES_TUPLES_OK)
 	{
 		log_err(_("Get cluster size PQexec failed: %s"),
-				PQerrorMessage(conn));
+		        PQerrorMessage(conn));
+		PQclear(res);
+		PQfinish(conn);
+		exit(ERR_DB_QUERY);
 	}
-	else
-	{
-		size = PQgetvalue(res, 0, 0);
-	}
-
+	size = PQgetvalue(res, 0, 0);
 	PQclear(res);
 	return size;
 }
@@ -315,23 +197,24 @@ get_cluster_size(PGconn *conn)
 * get a connection to master by reading repl_nodes, creating a connection
 * to each node (one at a time) and finding if it is a master or a standby
 *
- * NB: If master_conninfo_out may be NULL.	If it is non-null, it is assumed to
+ * NB: If master_conninfo_out may be NULL.  If it is non-null, it is assumed to
 * point to allocated memory of MAXCONNINFO in length, and the master server
 * connection string is placed there.
 */
 PGconn *
-get_master_connection(PGconn *standby_conn, char *schema, char *cluster,
-					  int *master_id, char *master_conninfo_out)
+getMasterConnection(PGconn *standby_conn, char *cluster,
+                    int *master_id, char *master_conninfo_out)
 {
-	PGconn	   *master_conn = NULL;
-	PGresult   *res1;
-	PGresult   *res2;
-	char		sqlquery[QUERY_STR_LEN];
-	char		master_conninfo_stack[MAXCONNINFO];
-	char	   *master_conninfo = &*master_conninfo_stack;
-	char		schema_quoted[MAXLEN];
+	PGconn		*master_conn	 = NULL;
+	PGresult	*res1;
+	PGresult	*res2;
+	char		 sqlquery[QUERY_STR_LEN];
+	char		 master_conninfo_stack[MAXCONNINFO];
+	char		*master_conninfo = &*master_conninfo_stack;
+	char		 schema_str[MAXLEN];
+	char		 schema_quoted[MAXLEN];

-	int			i;
+	int		 i;

 	/*
 	 * If the caller wanted to get a copy of the connection info string, sub
@@ -345,9 +228,10 @@ get_master_connection(PGconn *standby_conn, char *schema, char *cluster,
 	 *
 	 * Assemble the unquoted schema name
 	 */
+	maxlen_snprintf(schema_str, "repmgr_%s", cluster);
 	{
-		char	   *identifier = PQescapeIdentifier(standby_conn, schema,
-													strlen(schema));
+		char *identifier = PQescapeIdentifier(standby_conn, schema_str,
+		                                      strlen(schema_str));

 		maxlen_snprintf(schema_quoted, "%s", identifier);
 		PQfreemem(identifier);
@@ -355,44 +239,45 @@ get_master_connection(PGconn *standby_conn, char *schema, char *cluster,

 	/* find all nodes belonging to this cluster */
 	log_info(_("finding node list for cluster '%s'\n"),
-			 cluster);
+	         cluster);

-	sqlquery_snprintf(sqlquery, "SELECT id, conninfo FROM %s.repl_nodes "
-					  " WHERE cluster = '%s' and not witness",
-					  schema_quoted, cluster);
+	sqlquery_snprintf(sqlquery, "SELECT * FROM %s.repl_nodes "
+	                  " WHERE cluster = '%s'",
+	                  schema_quoted, cluster);

 	res1 = PQexec(standby_conn, sqlquery);
 	if (PQresultStatus(res1) != PGRES_TUPLES_OK)
 	{
 		log_err(_("Can't get nodes info: %s\n"),
-				PQerrorMessage(standby_conn));
+		        PQerrorMessage(standby_conn));
 		PQclear(res1);
-		return NULL;
+		PQfinish(standby_conn);
+		exit(ERR_DB_QUERY);
 	}

 	for (i = 0; i < PQntuples(res1); i++)
 	{
 		/* initialize with the values of the current node being processed */
 		*master_id = atoi(PQgetvalue(res1, i, 0));
-		strncpy(master_conninfo, PQgetvalue(res1, i, 1), MAXCONNINFO);
+		strncpy(master_conninfo, PQgetvalue(res1, i, 2), MAXCONNINFO);
 		log_info(_("checking role of cluster node '%s'\n"),
-				 master_conninfo);
-		master_conn = establish_db_connection(master_conninfo, false);
+		         master_conninfo);
+		master_conn = establishDBConnection(master_conninfo, false);

 		if (PQstatus(master_conn) != CONNECTION_OK)
 			continue;

 		/*
 		 * Can't use the is_standby() function here because on error that
-		 * function closes the connection passed and exits.  This still needs
-		 * to close master_conn first.
+		 * function closes the connection passed and exits.  This still
+		 * needs to close master_conn first.
 		 */
 		res2 = PQexec(master_conn, "SELECT pg_is_in_recovery()");

 		if (PQresultStatus(res2) != PGRES_TUPLES_OK)
 		{
 			log_err(_("Can't get recovery state from this node: %s\n"),
-					PQerrorMessage(master_conn));
+			        PQerrorMessage(master_conn));
 			PQclear(res2);
 			PQfinish(master_conn);
 			continue;
@@ -414,116 +299,15 @@ get_master_connection(PGconn *standby_conn, char *schema, char *cluster,
 		}
 	}

-	/*
-	 * If we finish this loop without finding a master then we doesn't have
-	 * the info or the master has failed (or we reached max_connections or
-	 * superuser_reserved_connections, anything else I'm missing?).
+	/* If we finish this loop without finding a master then
+	 * we doesn't have the info or the master has failed (or we
+	 * reached max_connections or superuser_reserved_connections,
+	 * anything else I'm missing?).
 	 *
-	 * Probably we will need to check the error to know if we need to start
-	 * failover procedure or just fix some situation on the standby.
+	 * Probably we will need to check the error to know if we need
+	 * to start failover procedure or just fix some situation on the
+	 * standby.
 	 */
 	PQclear(res1);
 	return NULL;
 }
-
-
-/*
- * wait until current query finishes ignoring any results, this could be an
- * async command or a cancelation of a query
- * return 1 if Ok; 0 if any error ocurred; -1 if timeout reached
- */
-int
-wait_connection_availability(PGconn *conn, long long timeout)
-{
-	PGresult   *res;
-	fd_set		read_set;
-	int			sock = PQsocket(conn);
-	struct timeval tmout,
-				before,
-				after;
-	struct timezone tz;
-
-	/* recalc to microseconds */
-	timeout *= 1000000;
-
-	while (timeout > 0)
-	{
-		if (PQconsumeInput(conn) == 0)
-		{
-			log_warning(_("wait_connection_availability: could not receive data from connection. %s\n"),
-						PQerrorMessage(conn));
-			return 0;
-		}
-
-		if (PQisBusy(conn) == 0)
-		{
-			do
-			{
-				res = PQgetResult(conn);
-				PQclear(res);
-			} while (res != NULL);
-
-			break;
-		}
-
-
-		tmout.tv_sec = 0;
-		tmout.tv_usec = 250000;
-
-		FD_ZERO(&read_set);
-		FD_SET(sock, &read_set);
-
-		gettimeofday(&before, &tz);
-		if (select(sock, &read_set, NULL, NULL, &tmout) == -1)
-		{
-			log_warning(
-						_("wait_connection_availability: select() returned with error: %s"),
-						strerror(errno));
-			return -1;
-		}
-		gettimeofday(&after, &tz);
-
-		timeout -= (after.tv_sec * 1000000 + after.tv_usec) -
-			(before.tv_sec * 1000000 + before.tv_usec);
-	}
-
-
-	if (timeout >= 0)
-	{
-		return 1;
-	}
-
-	log_warning(_("wait_connection_availability: timeout reached"));
-	return -1;
-}
-
-
-bool
-cancel_query(PGconn *conn, int timeout)
-{
-	char		errbuf[ERRBUFF_SIZE];
-	PGcancel   *pgcancel;
-
-	if (wait_connection_availability(conn, timeout) != 1)
-		return false;
-
-	pgcancel = PQgetCancel(conn);
-
-	if (pgcancel == NULL)
-		return false;
-
-	/*
-	 * PQcancel can only return 0 if socket()/connect()/send() fails, in any
-	 * of those cases we can assume something bad happened to the connection
-	 */
-	if (PQcancel(pgcancel, errbuf, ERRBUFF_SIZE) == 0)
-	{
-		log_warning(_("Can't stop current query: %s\n"), errbuf);
-		PQfreeCancel(pgcancel);
-		return false;
-	}
-
-	PQfreeCancel(pgcancel);
-
-	return true;
-}
--- a/dbutils.h
+++ b/dbutils.h
@@ -1,6 +1,6 @@
 /*
 * dbutils.h
- * Copyright (c) 2ndQuadrant, 2010-2014
+ * Copyright (c) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -22,25 +22,16 @@

 #include "strutil.h"

-PGconn *establish_db_connection(const char *conninfo,
-						const bool exit_on_error);
-PGconn *establish_db_connection_by_params(const char *keywords[],
-								  const char *values[],
-								  const bool exit_on_error);
-int			is_standby(PGconn *conn);
-int			is_witness(PGconn *conn, char *schema, char *cluster, int node_id);
-bool		is_pgup(PGconn *conn, int timeout);
-char	   *pg_version(PGconn *conn, char *major_version);
-int guc_set(PGconn *conn, const char *parameter, const char *op,
-		const char *value);
-int guc_set_typed(PGconn *conn, const char *parameter, const char *op,
-			  const char *value, const char *datatype);
-
-const char *get_cluster_size(PGconn *conn);
-PGconn *get_master_connection(PGconn *standby_conn, char *schema, char *cluster,
-					  int *master_id, char *master_conninfo_out);
-
-int			wait_connection_availability(PGconn *conn, long long timeout);
-bool		cancel_query(PGconn *conn, int timeout);
+PGconn *establishDBConnection(const char *conninfo, const bool exit_on_error);
+PGconn *establishDBConnectionByParams(const char *keywords[],
+                                      const char *values[],
+                                      const bool exit_on_error);
+bool	is_standby(PGconn *conn);
+char   *pg_version(PGconn *conn, char* major_version);
+bool	guc_setted(PGconn *conn, const char *parameter, const char *op,
+                   const char *value);
+const char	 *get_cluster_size(PGconn *conn);
+PGconn *getMasterConnection(PGconn *standby_conn, char *cluster,
+                            int *master_id, char *master_conninfo_out);

 #endif
--- a/debian/DEBIAN/control
+++ b/debian/DEBIAN/control
@@ -1,9 +1,9 @@
-Package: repmgr-auto
-Version: 2.0beta2
+Package: repmgr
+Version: 1.0-1
 Section: database
 Priority: optional
 Architecture: all
-Depends: rsync, postgresql-9.0 | postgresql-9.1 | postgresql-9.2 | postgresql-9.3
-Maintainer: Jaime Casanova <jaime@2ndQuadrant.com>
+Depends: rsync, postgresql-9.0
+Maintainer: Greg Smith <greg@2ndQuadrant.com>
 Description: PostgreSQL replication setup, magament and monitoring
 has two main executables
--- a/debian/repmgr.repmgrd.default
+++ b/debian/repmgr.repmgrd.default
@@ -1,18 +0,0 @@
-# default settings for repmgrd. This file is source by /bin/sh from
-# /etc/init.d/repmgrd
-
-# disable repmgrd by default so it won't get started upon installation
-# valid values: yes/no
-REPMGRD_ENABLED=no
-
-# Options for repmgrd (required)
-#REPMGRD_OPTS="--config-file /path/to/repmgr.conf"
-
-# User to run repmgrd as
-#REPMGRD_USER=postgres
-
-# repmgrd binary
-#REPMGR_BIN=/usr/bin/repmgr
-
-# pid file
-#REPMGR_PIDFILE=/var/run/repmgrd.pid
--- a/debian/repmgr.repmgrd.init
+++ b/debian/repmgr.repmgrd.init
@@ -1,101 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:	     repmgrd
-# Required-Start:    $local_fs $remote_fs $network $syslog postgresql
-# Required-Stop:     $local_fs $remote_fs $network $syslog postgresql
-# Should-Start:	     $syslog postgresql
-# Default-Start:     2 3 4 5
-# Default-Stop:	     0 1 6
-# Short-Description: Start/stop repmgrd
-# Description:       Enable repmgrd replication management and monitoring daemon for PostgreSQL
-### END INIT INFO
-
-set -e
-
-DESC="PostgreSQL replication management and monitoring daemon"
-NAME=repmgrd
-
-REPMGRD_ENABLED=no
-REPMGRD_OPTS=
-REPMGRD_USER=postgres
-REPMGRD_BIN=/usr/bin/repmgrd
-REPMGRD_PIDFILE=/var/run/repmgrd.pid
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-test -x $REPMGRD_BIN || exit 0
-
-case "$REPMGRD_ENABLED" in
-    [Yy]*)
-	break
-	;;
-    *)
-	exit 0
-	;;
-esac
-
-# Define LSB log_* functions.
-. /lib/lsb/init-functions
-
-if [ -z "$REPMGRD_OPTS" ]
-then
-    log_warning_msg "Not starting $NAME, REPMGRD_OPTS not set in /etc/default/$NAME"
-    exit 0
-fi
-
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   other if daemon could not be started or a failure occured
-	start-stop-daemon --start --quiet --background --chuid $REPMGRD_USER --make-pidfile --pidfile $REPMGRD_PIDFILE --exec $REPMGRD_BIN -- $REPMGRD_OPTS
-}
-
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   other if daemon could not be stopped or a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $REPMGRD_PIDFILE --exec $REPMGRD_BIN
-}
-
-case "$1" in
-  start)
-	log_daemon_msg "Starting $DESC" "$NAME"
-	do_start
-	case "$?" in
-		0) log_end_msg 0 ;;
-		1) log_progress_msg "already started"
-		   log_end_msg 0 ;;
-		*) log_end_msg 1 ;;
-	esac
-
-	;;
-  stop)
-	log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0) log_end_msg 0 ;;
-		1) log_progress_msg "already stopped"
-		   log_end_msg 0 ;;
-		*) log_end_msg 1 ;;
-	esac
-
-	;;
-  restart|force-reload)
-	$0 stop
-	$0 start
-	;;
-  status)
-	status_of_proc -p $REPMGRD_PIDFILE $REPMGRD_BIN $NAME && exit 0 || exit $?
-	;;
-  *)
-	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2
-	exit 3
-	;;
-esac
-
-exit 0
--- a/errcode.h
+++ b/errcode.h
@@ -1,6 +1,6 @@
 /*
 * errcode.h
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -33,8 +33,5 @@
 #define ERR_PROMOTED 8
 #define ERR_BAD_PASSWORD 9
 #define ERR_STR_OVERFLOW 10
-#define ERR_FAILOVER_FAIL 11
-#define ERR_BAD_SSH 12
-#define ERR_SYS_FAILURE 13

-#endif   /* _ERRCODE_H_ */
+#endif	/* _ERRCODE_H_ */
--- a/log.c
+++ b/log.c
@@ -1,6 +1,6 @@
 /*
 * log.c - Logging methods
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2010-2011
 *
 * This module is a set of methods for logging (currently only syslog)
 *
@@ -25,10 +25,8 @@

 #ifdef HAVE_SYSLOG
 #include <syslog.h>
-#endif
-
 #include <stdarg.h>
-#include <time.h>
+#endif

 #include "log.h"

@@ -39,44 +37,20 @@

 /* #define REPMGR_DEBUG */

-void
-stderr_log_with_level(const char *level_name, int level, const char *fmt, ...)
+static int detect_log_level(const char* level);
+static int detect_log_facility(const char* facility);
+
+int log_type = REPMGR_STDERR;
+int log_level = LOG_NOTICE;
+
+bool logger_init(const char* ident, const char* level, const char* facility)
 {
-	time_t		t;
-	struct tm  *tm;
-	char		buff[100];
-	va_list		ap;

-	if (log_level >= level)
-	{
-		time(&t);
-		tm = localtime(&t);
-		strftime(buff, 100, "[%Y-%m-%d %H:%M:%S]", tm);
-		fprintf(stderr, "%s [%s] ", buff, level_name);
-
-		va_start(ap, fmt);
-		vfprintf(stderr, fmt, ap);
-		va_end(ap);
-
-		fflush(stderr);
-	}
-}
-
-
-static int	detect_log_level(const char *level);
-static int	detect_log_facility(const char *facility);
-
-int			log_type = REPMGR_STDERR;
-int			log_level = LOG_NOTICE;
-
-bool
-logger_init(t_configuration_options * opts, const char *ident, const char *level, const char *facility)
-{
-	int			l;
-	int			f;
+	int l;
+	int f;

 #ifdef HAVE_SYSLOG
-	int			syslog_facility = DEFAULT_SYSLOG_FACILITY;
+	int syslog_facility = DEFAULT_SYSLOG_FACILITY;
 #endif

 #ifdef REPMGR_DEBUG
@@ -133,33 +107,21 @@ logger_init(t_configuration_options * opts, const char *ident, const char *level

 	if (log_type == REPMGR_SYSLOG)
 	{
-		setlogmask(LOG_UPTO(log_level));
-		openlog(ident, LOG_CONS | LOG_PID | LOG_NDELAY, syslog_facility);
+		setlogmask (LOG_UPTO (log_level));
+		openlog (ident, LOG_CONS | LOG_PID | LOG_NDELAY, syslog_facility);

 		stderr_log_notice(_("Setup syslog (level: %s, facility: %s)\n"), level, facility);
 	}
+
 #endif

-	if (*opts->logfile)
-	{
-		FILE	   *fd;
-
-		fd = freopen(opts->logfile, "a", stderr);
-
-		if (fd == NULL)
-		{
-			fprintf(stderr, "error reopening stderr to '%s': %s",
-					opts->logfile, strerror(errno));
-		}
-	}
-
 	return true;

 }

-bool
-logger_shutdown(void)
+bool logger_shutdown(void)
 {
+
 #ifdef HAVE_SYSLOG
 	if (log_type == REPMGR_SYSLOG)
 		closelog();
@@ -173,15 +135,13 @@ logger_shutdown(void)
 * options, which might increase requested logging over what's specified
 * in the regular configuration file.
 */
-void
-logger_min_verbose(int minimum)
+void logger_min_verbose(int minimum)
 {
 	if (log_level < minimum)
 		log_level = minimum;
 }

-int
-detect_log_level(const char *level)
+int detect_log_level(const char* level)
 {
 	if (!strcmp(level, "DEBUG"))
 		return LOG_DEBUG;
@@ -203,42 +163,40 @@ detect_log_level(const char *level)
 	return 0;
 }

-int
-detect_log_facility(const char *facility)
+int detect_log_facility(const char* facility)
 {
-	int			local = 0;
-
+	int local = 0;
 	if (!strncmp(facility, "LOCAL", 5) && strlen(facility) == 6)
 	{

-		local = atoi(&facility[5]);
+		local = atoi (&facility[5]);

 		switch (local)
 		{
-			case 0:
-				return LOG_LOCAL0;
-				break;
-			case 1:
-				return LOG_LOCAL1;
-				break;
-			case 2:
-				return LOG_LOCAL2;
-				break;
-			case 3:
-				return LOG_LOCAL3;
-				break;
-			case 4:
-				return LOG_LOCAL4;
-				break;
-			case 5:
-				return LOG_LOCAL5;
-				break;
-			case 6:
-				return LOG_LOCAL6;
-				break;
-			case 7:
-				return LOG_LOCAL7;
-				break;
+		case 0:
+			return LOG_LOCAL0;
+			break;
+		case 1:
+			return LOG_LOCAL1;
+			break;
+		case 2:
+			return LOG_LOCAL2;
+			break;
+		case 3:
+			return LOG_LOCAL3;
+			break;
+		case 4:
+			return LOG_LOCAL4;
+			break;
+		case 5:
+			return LOG_LOCAL5;
+			break;
+		case 6:
+			return LOG_LOCAL6;
+			break;
+		case 7:
+			return LOG_LOCAL7;
+			break;
 		}

 	}
--- a/log.h
+++ b/log.h
@@ -1,6 +1,6 @@
 /*
 * log.h
- * Copyright (c) 2ndQuadrant, 2010-2014
+ * Copyright (c) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -25,19 +25,15 @@
 #define REPMGR_SYSLOG 1
 #define REPMGR_STDERR 2

-void
-stderr_log_with_level(const char *level_name, int level, const char *fmt,...)
-__attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 4)));
-
 /* Standard error logging */
-#define stderr_log_debug(...) stderr_log_with_level("DEBUG", LOG_DEBUG, __VA_ARGS__)
-#define stderr_log_info(...)  stderr_log_with_level("INFO", LOG_INFO, __VA_ARGS__)
-#define stderr_log_notice(...) stderr_log_with_level("NOTICE", LOG_NOTICE, __VA_ARGS__)
-#define stderr_log_warning(...) stderr_log_with_level("WARNING", LOG_WARNING, __VA_ARGS__)
-#define stderr_log_err(...) stderr_log_with_level("ERROR", LOG_ERR, __VA_ARGS__)
-#define stderr_log_crit(...) stderr_log_with_level("CRITICAL", LOG_CRIT, __VA_ARGS__)
-#define stderr_log_alert(...) stderr_log_with_level("ALERT", LOG_ALERT, __VA_ARGS__)
-#define stderr_log_emerg(...) stderr_log_with_level("EMERGENCY", LOG_EMERG, __VA_ARGS__)
+#define stderr_log_debug(...) if (log_level >= LOG_DEBUG) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_info(...) if (log_level >= LOG_INFO) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_notice(...) if (log_level >= LOG_NOTICE) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_warning(...) if (log_level >= LOG_WARNING) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_err(...) if (log_level >= LOG_ERR) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_crit(...) if (log_level >= LOG_CRIT) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_alert(...) if (log_level >= LOG_ALERT) fprintf(stderr, __VA_ARGS__)
+#define stderr_log_emerg(...) if (log_level >= LOG_EMERG) fprintf(stderr, __VA_ARGS__)

 #ifdef HAVE_SYSLOG

@@ -90,16 +86,17 @@ __attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 4)));
 		if (log_type == REPMGR_SYSLOG) syslog(LOG_ALERT, __VA_ARGS__); \
 		else stderr_log_alert(__VA_ARGS__); \
 	}
+
 #else

-#define LOG_EMERG	0			/* system is unusable */
-#define LOG_ALERT	1			/* action must be taken immediately */
-#define LOG_CRIT	2			/* critical conditions */
-#define LOG_ERR		3			/* error conditions */
-#define LOG_WARNING 4			/* warning conditions */
-#define LOG_NOTICE	5			/* normal but significant condition */
-#define LOG_INFO	6			/* informational */
-#define LOG_DEBUG	7			/* debug-level messages */
+#define	LOG_EMERG	0	/* system is unusable */
+#define	LOG_ALERT	1	/* action must be taken immediately */
+#define	LOG_CRIT	2	/* critical conditions */
+#define	LOG_ERR		3	/* error conditions */
+#define	LOG_WARNING	4	/* warning conditions */
+#define	LOG_NOTICE	5	/* normal but significant condition */
+#define	LOG_INFO	6	/* informational */
+#define	LOG_DEBUG	7	/* debug-level messages */

 #define log_debug(...) stderr_log_debug(__VA_ARGS__)
 #define log_info(...) stderr_log_info(__VA_ARGS__)
@@ -109,18 +106,16 @@ __attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 4)));
 #define log_crit(...) stderr_log_crit(__VA_ARGS__)
 #define log_alert(...) stderr_log_alert(__VA_ARGS__)
 #define log_emerg(...) stderr_log_emerg(__VA_ARGS__)
+
 #endif


 /* Logger initialisation and shutdown */
-bool		logger_shutdown(void);
+bool logger_shutdown(void);
+bool logger_init(const char* ident, const char* level, const char* facility);
+void logger_min_verbose(int minimum);

-bool logger_init(t_configuration_options * opts, const char *ident,
-			const char *level, const char *facility);
-
-void		logger_min_verbose(int minimum);
-
-extern int	log_type;
-extern int	log_level;
+extern int log_type;
+extern int log_level;

 #endif
--- a/repmgr.c
+++ b/repmgr.c
--- a/repmgr.conf
+++ b/repmgr.conf
@@ -0,0 +1,21 @@
+###################################################
+# Replication Manager configuration file
+###################################################
+
+# Cluster name
+cluster=test
+
+# Node ID
+node=2
+
+# Connection information
+conninfo='host=192.168.204.104'
+rsync_options=--archive --checksum --compress --progress --rsh=ssh
+
+# Log level: possible values are DEBUG, INFO, NOTICE, WARNING, ERR, ALERT, CRIT or EMERG
+# Default: NOTICE
+loglevel=NOTICE
+
+# Logging facility: possible values are STDERR or - for Syslog integration - one of LOCAL0, LOCAL1, ..., LOCAL7, USER
+# Default: STDERR
+logfacility=STDERR
--- a/repmgr.conf.sample
+++ b/repmgr.conf.sample
@@ -1,62 +0,0 @@
-###################################################
-# Replication Manager configuration file
-###################################################
-
-# Cluster name
-cluster=test
-
-# Node ID
-node=2
-node_name=standby2
-
-# Connection information
-conninfo='host=192.168.204.104'
-rsync_options=--archive --checksum --compress --progress --rsh="ssh -o \"StrictHostKeyChecking no\""
-ssh_options=-o "StrictHostKeyChecking no"
-
-# How many seconds we wait for master response before declaring master failure
-master_response_timeout=60
-
-# How many time we try to reconnect to master before starting failover procedure
-reconnect_attempts=6
-reconnect_interval=10
-
-# Autofailover options
-failover=manual
-priority=-1
-promote_command='repmgr standby promote -f /path/to/repmgr.conf'
-follow_command='repmgr standby follow -f /path/to/repmgr.conf -W'
-
-# Log level: possible values are DEBUG, INFO, NOTICE, WARNING, ERR, ALERT, CRIT or EMERG
-# Default: NOTICE
-loglevel=NOTICE
-
-# Logging facility: possible values are STDERR or - for Syslog integration - one of LOCAL0, LOCAL1, ..., LOCAL7, USER
-# Default: STDERR
-logfacility=STDERR
-
-# path to pg_ctl executable
-pg_bindir=/usr/bin/
-
-#
-# you may add command line arguments for pg_ctl
-#
-# pg_ctl_options='-s'
-
-#
-# redirect stderr to a logfile
-#
-# logfile='/var/log/repmgr.log'
-
-#
-# change monitoring interval; default is 2s
-#
-# monitor_interval_secs=2
-
-#
-# change wait time for master; before we bail out and exit when the
-# master disappears, we wait 6 * retry_promote_interval_secs seconds;
-# by default this would be half an hour (since sleep_delay default
-# value is 300)
-#
-# retry_promote_interval_secs=300
--- a/repmgr.h
+++ b/repmgr.h
@@ -1,6 +1,6 @@
 /*
 * repmgr.h
- * Copyright (c) 2ndQuadrant, 2010-2014
+ * Copyright (c) 2ndQuadrant, 2010-2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -30,7 +30,6 @@

 #define PRIMARY_MODE		0
 #define STANDBY_MODE		1
-#define WITNESS_MODE		2

 #include "config.h"
 #define MAXFILENAME		1024
@@ -43,34 +42,25 @@
 #define DEFAULT_DBNAME			"postgres"
 #define DEFAULT_REPMGR_SCHEMA_PREFIX	"repmgr_"

-#define MANUAL_FAILOVER		0
-#define AUTOMATIC_FAILOVER	1
-
 /* Run time options type */
 typedef struct
 {

-	char		dbname[MAXLEN];
-	char		host[MAXLEN];
-	char		username[MAXLEN];
-	char		dest_dir[MAXFILENAME];
-	char		config_file[MAXFILENAME];
-	char		remote_user[MAXLEN];
-	char		wal_keep_segments[MAXLEN];
-	bool		verbose;
-	bool		force;
-	bool		wait_for_master;
-	bool		ignore_rsync_warn;
+	char dbname[MAXLEN];
+	char host[MAXLEN];
+	char username[MAXLEN];
+	char dest_dir[MAXFILENAME];
+	char config_file[MAXFILENAME];
+	char remote_user[MAXLEN];
+	char wal_keep_segments[MAXLEN];
+	bool verbose;
+	bool force;
+	bool ignore_rsync_warn;

-	char		masterport[MAXLEN];
-	char		localport[MAXLEN];
+	char masterport[MAXLEN];

 	/* parameter used by CLUSTER CLEANUP */
-	int			keep_history;
-
-	char min_recovery_apply_delay[MAXLEN];
-}	t_runtime_options;
-
-#define T_RUNTIME_OPTIONS_INITIALIZER { "", "", "", "", "", "", DEFAULT_WAL_KEEP_SEGMENTS, false, false, false, false, "", "", 0, "" }
+	int	keep_history;
+} t_runtime_options;

 #endif
--- a/repmgr.sql
+++ b/repmgr.sql
@@ -1,7 +1,7 @@
 /*
 * repmgr.sql
 *
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2011
 *
 */

@@ -14,11 +14,8 @@ CREATE SCHEMA repmgr;
 */
 CREATE TABLE repl_nodes (
  id            integer primary key,
-  cluster   	text    not null,       -- Name to identify the cluster
-  name			text	not null,
-  conninfo      text    not null,
-  priority  	integer not null,
-  witness   	boolean not null default false
+  cluster   text        not null,       -- Name to identify the cluster
+  conninfo      text    not null
 );
 ALTER TABLE repl_nodes OWNER TO repmgr;

@@ -31,12 +28,13 @@ CREATE TABLE repl_monitor (
  standby_node                   INTEGER NOT NULL,
  last_monitor_time                      TIMESTAMP WITH TIME ZONE NOT NULL,
  last_wal_primary_location      TEXT NOT NULL,
-  last_wal_standby_location      TEXT,		-- In case of a witness server this will be NULL
+  last_wal_standby_location      TEXT NOT NULL,
  replication_lag                BIGINT NOT NULL,
  apply_lag                      BIGINT NOT NULL
 );
 ALTER TABLE repl_monitor OWNER TO repmgr;

+
 /*
 * This view shows the latest monitor info about every node.
 * Interesting thing to see:
@@ -48,14 +46,14 @@ ALTER TABLE repl_monitor OWNER TO repmgr;
 * time_lag: how many seconds are we from being up-to-date with master
 */
 CREATE VIEW repl_status AS
-SELECT primary_node, standby_node, name AS standby_name, last_monitor_time, last_wal_primary_location,
+WITH monitor_info AS (SELECT *, ROW_NUMBER() OVER (PARTITION BY primary_node, standby_node
+                                                       ORDER BY last_monitor_time desc)
+                        FROM repl_monitor)
+SELECT primary_node, standby_node, last_monitor_time, last_wal_primary_location,
       last_wal_standby_location, pg_size_pretty(replication_lag) replication_lag,
       pg_size_pretty(apply_lag) apply_lag,
       age(now(), last_monitor_time) AS time_lag
- FROM repl_monitor JOIN repl_nodes ON standby_node = id
-WHERE (standby_node, last_monitor_time) IN (SELECT standby_node, MAX(last_monitor_time)
-                                              FROM repl_monitor GROUP BY 1);
+  FROM monitor_info a
+ WHERE row_number = 1;

 ALTER VIEW repl_status OWNER TO repmgr;
-
-CREATE INDEX idx_repl_status_sort ON repl_monitor(last_monitor_time, standby_node);
--- a/repmgrd.c
+++ b/repmgrd.c
--- a/sql/Makefile
+++ b/sql/Makefile
@@ -1,20 +0,0 @@
-#
-# Makefile
-# Copyright (c) 2ndQuadrant, 2010
-#
-
-MODULE_big = repmgr_funcs
-DATA_built=repmgr_funcs.sql
-DATA=uninstall_repmgr_funcs.sql
-OBJS=repmgr_funcs.o
-
-ifdef USE_PGXS
-PG_CONFIG = pg_config
-PGXS := $(shell $(PG_CONFIG) --pgxs)
-include $(PGXS)
-else
-subdir = contrib/repmgr/sql
-top_builddir = ../../..
-include $(top_builddir)/src/Makefile.global
-include $(top_srcdir)/contrib/contrib-global.mk
-endif
--- a/sql/repmgr_funcs.c
+++ b/sql/repmgr_funcs.c
@@ -1,232 +0,0 @@
-/*
- * repmgr_funcs.c
- * Copyright (c) 2ndQuadrant, 2010
- *
- * Shared memory state management and some backend functions in SQL
- */
-
-#include "postgres.h"
-#include "fmgr.h"
-#include "access/xlog.h"
-#include "miscadmin.h"
-#include "storage/ipc.h"
-#include "storage/lwlock.h"
-#include "storage/procarray.h"
-#include "storage/shmem.h"
-#include "storage/spin.h"
-#include "utils/builtins.h"
-#include "utils/timestamp.h"
-
-/* same definition as the one in xlog_internal.h */
-#define MAXFNAMELEN		64
-
-PG_MODULE_MAGIC;
-
-/*
- * Global shared state
- */
-typedef struct repmgrSharedState
-{
-	LWLockId	lock;			/* protects search/modification */
-	char		location[MAXFNAMELEN];	/* last known xlog location */
-	TimestampTz last_updated;
-}	repmgrSharedState;
-
-/* Links to shared memory state */
-static repmgrSharedState *shared_state = NULL;
-
-static shmem_startup_hook_type prev_shmem_startup_hook = NULL;
-
-void		_PG_init(void);
-void		_PG_fini(void);
-
-static void repmgr_shmem_startup(void);
-static Size repmgr_memsize(void);
-
-static bool repmgr_set_standby_location(char *locationstr);
-
-Datum		repmgr_update_standby_location(PG_FUNCTION_ARGS);
-Datum		repmgr_get_last_standby_location(PG_FUNCTION_ARGS);
-
-PG_FUNCTION_INFO_V1(repmgr_update_standby_location);
-PG_FUNCTION_INFO_V1(repmgr_get_last_standby_location);
-
-Datum		repmgr_update_last_updated(PG_FUNCTION_ARGS);
-Datum		repmgr_get_last_updated(PG_FUNCTION_ARGS);
-
-PG_FUNCTION_INFO_V1(repmgr_update_last_updated);
-PG_FUNCTION_INFO_V1(repmgr_get_last_updated);
-
-
-/*
- * Module load callback
- */
-void
-_PG_init(void)
-{
-	/*
-	 * In order to create our shared memory area, we have to be loaded via
-	 * shared_preload_libraries.  If not, fall out without hooking into any of
-	 * the main system.  (We don't throw error here because it seems useful to
-	 * allow the repmgr functions to be created even when the module isn't
-	 * active.	The functions must protect themselves against being called
-	 * then, however.)
-	 */
-	if (!process_shared_preload_libraries_in_progress)
-		return;
-
-	/*
-	 * Request additional shared resources.  (These are no-ops if we're not in
-	 * the postmaster process.)  We'll allocate or attach to the shared
-	 * resources in repmgr_shmem_startup().
-	 */
-	RequestAddinShmemSpace(repmgr_memsize());
-	RequestAddinLWLocks(1);
-
-	/*
-	 * Install hooks.
-	 */
-	prev_shmem_startup_hook = shmem_startup_hook;
-	shmem_startup_hook = repmgr_shmem_startup;
-}
-
-/*
- * Module unload callback
- */
-void
-_PG_fini(void)
-{
-	/* Uninstall hooks. */
-	shmem_startup_hook = prev_shmem_startup_hook;
-}
-
-/*
- * shmem_startup hook: allocate or attach to shared memory,
- */
-static void
-repmgr_shmem_startup(void)
-{
-	bool		found;
-
-	if (prev_shmem_startup_hook)
-		prev_shmem_startup_hook();
-
-	/* reset in case this is a restart within the postmaster */
-	shared_state = NULL;
-
-	/*
-	 * Create or attach to the shared memory state, including hash table
-	 */
-	LWLockAcquire(AddinShmemInitLock, LW_EXCLUSIVE);
-
-	shared_state = ShmemInitStruct("repmgr shared state",
-								   sizeof(repmgrSharedState),
-								   &found);
-
-	if (!found)
-	{
-		/* First time through ... */
-		shared_state->lock = LWLockAssign();
-		snprintf(shared_state->location,
-				 sizeof(shared_state->location), "%X/%X", 0, 0);
-	}
-
-	LWLockRelease(AddinShmemInitLock);
-}
-
-
-/*
- * Estimate shared memory space needed.
- */
-static Size
-repmgr_memsize(void)
-{
-	return MAXALIGN(sizeof(repmgrSharedState));
-}
-
-
-static bool
-repmgr_set_standby_location(char *locationstr)
-{
-	/* Safety check... */
-	if (!shared_state)
-		return false;
-
-	LWLockAcquire(shared_state->lock, LW_EXCLUSIVE);
-	strncpy(shared_state->location, locationstr, MAXFNAMELEN);
-	LWLockRelease(shared_state->lock);
-
-	return true;
-}
-
-
-/* SQL Functions */
-
-/* Read last xlog location reported by this standby from shared memory */
-Datum
-repmgr_get_last_standby_location(PG_FUNCTION_ARGS)
-{
-	char		location[MAXFNAMELEN];
-
-	/* Safety check... */
-	if (!shared_state)
-		PG_RETURN_NULL();
-
-	LWLockAcquire(shared_state->lock, LW_SHARED);
-	strncpy(location, shared_state->location, MAXFNAMELEN);
-	LWLockRelease(shared_state->lock);
-
-	PG_RETURN_TEXT_P(cstring_to_text(location));
-}
-
-
-/* Set update last xlog location reported by this standby to shared memory */
-Datum
-repmgr_update_standby_location(PG_FUNCTION_ARGS)
-{
-	text	   *location = PG_GETARG_TEXT_P(0);
-	char	   *locationstr;
-
-	/* Safety check... */
-	if (!shared_state)
-		PG_RETURN_BOOL(false);
-
-	locationstr = text_to_cstring(location);
-
-	PG_RETURN_BOOL(repmgr_set_standby_location(locationstr));
-}
-
-/* update and return last updated with current timestamp */
-Datum
-repmgr_update_last_updated(PG_FUNCTION_ARGS)
-{
-	TimestampTz last_updated = GetCurrentTimestamp();
-
-	/* Safety check... */
-	if (!shared_state)
-		PG_RETURN_NULL();
-
-	LWLockAcquire(shared_state->lock, LW_SHARED);
-	shared_state->last_updated = last_updated;
-	LWLockRelease(shared_state->lock);
-
-	PG_RETURN_TIMESTAMPTZ(last_updated);
-}
-
-
-/* get last updated timestamp */
-Datum
-repmgr_get_last_updated(PG_FUNCTION_ARGS)
-{
-	TimestampTz last_updated;
-
-	/* Safety check... */
-	if (!shared_state)
-		PG_RETURN_NULL();
-
-	LWLockAcquire(shared_state->lock, LW_EXCLUSIVE);
-	last_updated = shared_state->last_updated;
-	LWLockRelease(shared_state->lock);
-
-	PG_RETURN_TIMESTAMPTZ(last_updated);
-}
--- a/sql/repmgr_funcs.sql.in
+++ b/sql/repmgr_funcs.sql.in
@@ -1,23 +0,0 @@
-/*
- * repmgr_function.sql
- * Copyright (c) 2ndQuadrant, 2010-2014
- *
- */
-
-- SET SEARCH_PATH TO 'repmgr';
-
-CREATE FUNCTION repmgr_update_standby_location(text) RETURNS boolean
-AS 'MODULE_PATHNAME', 'repmgr_update_standby_location'
-LANGUAGE C STRICT;
-
-CREATE FUNCTION repmgr_get_last_standby_location() RETURNS text
-AS 'MODULE_PATHNAME', 'repmgr_get_last_standby_location'
-LANGUAGE C STRICT;
-
-CREATE FUNCTION repmgr_update_last_updated() RETURNS TIMESTAMP WITH TIME ZONE
-AS 'MODULE_PATHNAME', 'repmgr_update_last_updated'
-LANGUAGE C STRICT;
-
-CREATE FUNCTION repmgr_get_last_updated() RETURNS TIMESTAMP WITH TIME ZONE
-AS 'MODULE_PATHNAME', 'repmgr_get_last_updated'
-LANGUAGE C STRICT;
--- a/sql/uninstall_repmgr_funcs.sql
+++ b/sql/uninstall_repmgr_funcs.sql
@@ -1,11 +0,0 @@
-/*
- * uninstall_repmgr_funcs.sql
- * Copyright (c) 2ndQuadrant, 2010-2014
- *
- */
-
-DROP FUNCTION repmgr_update_standby_location(text);
-DROP FUNCTION repmgr_get_last_standby_location();
-
-DROP FUNCTION repmgr_update_last_updated();
-DROP FUNCTION repmgr_get_last_updated();
--- a/strutil.c
+++ b/strutil.c
@@ -1,7 +1,7 @@
 /*
 * strutil.c
 *
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2011
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -25,21 +25,29 @@
 #include "log.h"
 #include "strutil.h"

-static int
-xvsnprintf(char *str, size_t size, const char *format, va_list ap)
-__attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 0)));
+static int xvsnprintf(char *str, size_t size, const char *format, va_list ap);
+
+/* Add strnlen on platforms that don't have it, like OS X */
+#ifndef strnlen
+size_t
+strnlen(const char *s, size_t n)
+{
+	const char *end = (const char *) memchr(s, '\0', n);
+	return(end ? end - s : n);
+}
+#endif

 static int
 xvsnprintf(char *str, size_t size, const char *format, va_list ap)
 {
-	int			retval;
+	int retval;

 	retval = vsnprintf(str, size, format, ap);

-	if (retval >= (int) size)
+	if (retval >= size)
 	{
 		log_err(_("Buffer of size not large enough to format entire string '%s'\n"),
-				str);
+		        str);
 		exit(ERR_STR_OVERFLOW);
 	}

@@ -48,10 +56,10 @@ xvsnprintf(char *str, size_t size, const char *format, va_list ap)


 int
-xsnprintf(char *str, size_t size, const char *format,...)
+xsnprintf(char *str, size_t size, const char *format, ...)
 {
-	va_list		arglist;
-	int			retval;
+	va_list arglist;
+	int retval;

 	va_start(arglist, format);
 	retval = xvsnprintf(str, size, format, arglist);
@@ -62,7 +70,7 @@ xsnprintf(char *str, size_t size, const char *format,...)


 int
-sqlquery_snprintf(char *str, const char *format,...)
+sqlquery_snprintf(char *str, const char *format, ...)
 {
 	va_list		arglist;
 	int			retval;
@@ -75,8 +83,7 @@ sqlquery_snprintf(char *str, const char *format,...)
 }


-int
-maxlen_snprintf(char *str, const char *format,...)
+int maxlen_snprintf(char *str, const char *format, ...)
 {
 	va_list		arglist;
 	int			retval;
--- a/strutil.h
+++ b/strutil.h
@@ -1,6 +1,6 @@
 /*
 * strutil.h
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2010-2011
 *
 *
 * This program is free software: you can redistribute it and/or modify
@@ -31,16 +31,13 @@
 #define MAXCONNINFO		1024


-extern int
-xsnprintf(char *str, size_t size, const char *format,...)
-__attribute__((format(PG_PRINTF_ATTRIBUTE, 3, 4)));
+extern int xsnprintf(char *str, size_t size, const char *format, ...);
+extern int sqlquery_snprintf(char *str, const char *format, ...);
+extern int maxlen_snprintf(char *str, const char *format, ...);

-extern int
-sqlquery_snprintf(char *str, const char *format,...)
-__attribute__((format(PG_PRINTF_ATTRIBUTE, 2, 3)));
+/* Add strnlen on platforms that don't have it, like OS X */
+#ifndef strnlen
+extern size_t strnlen(const char *s, size_t n);
+#endif

-extern int
-maxlen_snprintf(char *str, const char *format,...)
-__attribute__((format(PG_PRINTF_ATTRIBUTE, 2, 3)));
-
-#endif   /* _STRUTIL_H_ */
+#endif	/* _STRUTIL_H_ */
--- a/uninstall_repmgr.sql
+++ b/uninstall_repmgr.sql
@@ -1,7 +1,7 @@
 /*
 * uninstall_repmgr.sql
 *
- * Copyright (C) 2ndQuadrant, 2010-2014
+ * Copyright (C) 2ndQuadrant, 2010-2011
 *
 */

--- a/version.h
+++ b/version.h
@@ -1,6 +1,4 @@
 #ifndef _VERSION_H_
 #define _VERSION_H_
-
-#define REPMGR_VERSION "2.1dev"
-
+#define REPMGR_VERSION "1.2.0"
 #endif
Author	SHA1	Message	Date
Jaime Casanova	efd50f11ac	Fix HISTORY to show from newest to oldest	2012-07-27 11:30:35 -05:00
Jaime Casanova	45a39084ed	Prepare release notes for release	2012-07-21 11:56:00 -05:00
Jaime Casanova	94c73a016f	Add a release note that was missing	2012-07-05 09:36:42 -05:00
Jaime Casanova	be5cbe4ddd	Improve the version message to actually show the repmgr version not only postgresql's one	2012-06-25 22:53:16 -05:00
Jaime Casanova	30d35d5b4c	Names on history file are without surnames when they are well-known so, keep it that way	2012-06-13 00:48:34 -05:00
Jaime Casanova	fa889a11ac	Remove now finished TODO item about having a sanity check for ssh	2012-06-13 00:43:00 -05:00
Jaime Casanova	f4087d0a32	Add a \n in a message	2012-06-12 23:41:31 -05:00
Jaime Casanova	a55d7a4bd3	getMasterConnection() cannot avoid checking the same node that asks to find the master. This was a micro optimization based on the fact that all commands that needed to detect the master were executed from the standby but now that we have CLUSTER level commands that is not true anymore	2012-06-12 23:23:49 -05:00
Jaime Casanova	5d8cf6abe0	Allow repmgr to obtain tablespace's locations from pg 9.2 and later in which we no longer have a spclocation column in pg_tablespaces	2012-06-12 10:49:23 -05:00
Jaime Casanova	9caa243354	Moving the 'Starting backup' message to a better place	2012-06-12 09:44:06 -05:00
Jaime Casanova	6880483947	STANDBY CLONE should be run by a SUPERUSER, otherwise we won't be able to retrieve data_directory and the other parameters we need by querying the database.	2012-06-12 09:37:03 -05:00
Jaime Casanova	3d89fdadab	Fix a typo in a message	2012-06-12 09:28:27 -05:00
Cédric Villemain	6e9e4e05ae	Add test_ssh_connection The feature was written by Jaime and reworked by me to fix https://github.com/greg2ndQuadrant/repmgr/issues/5	2012-05-09 15:24:38 -05:00
Jaime Casanova	17a160e970	Correct credits	2012-05-09 14:59:00 -05:00
Jaime Casanova	e0e01aa9db	Add Carlo to CREDITS	2012-04-27 02:09:48 -05:00
Jaime Casanova	b09eff9f76	Avoid the possibility of a double free. Fix by Carlo Ascani	2012-04-27 02:08:40 -05:00
Jaime Casanova	3c5d82b9ef	Complete CREDITS and HISTORY for release	2012-04-27 02:07:42 -05:00
Jaime Casanova	257dbc4f42	Cleanup of patch that introduces write_primary_conninfo()	2012-04-27 01:23:37 -05:00
Jaime Casanova	2a64099163	Added function "write_primary_conninfo" which now adds the username to the primary_conninfo parameter in recovery.conf	2012-04-27 01:10:24 -05:00
Jaime Casanova	41c05bea7b	Fix CLUSTER SHOW, that i have broken	2012-04-26 13:58:39 -05:00
Jaime Casanova	7d76d86e19	Add debug information to CLUSTER SHOW y CLUSTER CLEANUP	2012-04-26 13:31:54 -05:00
Jaime Casanova	36d5b5bc24	I need a local connection to get the master of the cluster	2012-04-26 12:29:04 -05:00
Jaime Casanova	c543402d65	A typo that escaped to my previous review	2012-04-26 12:23:24 -05:00
Jaime Casanova	d0959b953e	Cleanup patch about CLUSTER CLEANUP	2012-04-26 12:21:41 -05:00
Jaime Casanova	0660bded0b	Fix a switch in which a "break" was missing that makes always that --force option was used end up in the default section and error.	2012-04-19 12:21:49 -05:00
Jaime Casanova	209a0c64d2	Add documentation about both CLUSTER SHOW and CLUSTER CLEANUP commands	2012-04-14 21:56:58 -05:00
Jaime Casanova	fd76ec6283	Adds a CLUSTER CLEANUP command to clean monitor's history, also include a --keep-history (-k) option to indicate how many days of history to keep	2012-04-14 21:34:06 -05:00
Jaime Casanova	7d579cf71f	Add CLUSTER SHOW command to show the current nodes configured	2012-04-14 21:11:51 -05:00
Jaime Casanova	d790ef740b	Add a paragraph in the docs describing how to clean history	2012-04-11 10:54:22 -05:00
Jaime Casanova	aa6633b027	Complete the lists of error codes that repmgr can return in the README.rst	2012-04-11 10:38:22 -05:00
Jaime Casanova	c3bffce379	Run astyle to format code before tagging the release	2012-04-11 10:35:37 -05:00
Jaime Casanova	78aea00a6d	Avoid to show what segments are needed for this backup if the rsync failed	2012-04-11 10:34:38 -05:00
Jaime Casanova	91601204b5	Remove last argument from log_err, left in commit `9b8fb7e960`. Also rephrase the sentence Reported by Jeroen Dekkers	2011-11-28 17:26:19 -05:00
Jaime Casanova	c91ddc2f5e	Fix a wrong message. It was saying the problem is the version of the PostgreSQL server while it actually is because the MASTER REGISTER command was running on a standby node	2011-11-10 09:30:42 -05:00
Jaime Casanova	72f74dd7a7	Fix a typo introduced in commit `94c9c3a5c6`	2011-11-03 12:54:55 -05:00
Jaime Casanova	901d07fa92	Improve performance of the repl_status view	2011-10-20 23:20:03 -05:00
Greg Smith	f0e609bcd4	Add strnlen on platforms that don't have it, such as OS X	2011-10-20 17:04:29 -05:00
Jaime Casanova	94c9c3a5c6	Let the clone happen in a session with synchronous_commit off. This is because in pg 9.1 the default configuration can easily allow sync rep to be activated even if no standby is present and will block pg_start_backup() and pg_stop_backup() in that case. Also remove a second connection we were opening to execute pg_stop_backup(), i'm not sure why that was there but now it was a problem because it was another session and not the one we set here.	2011-10-03 13:56:31 -05:00
Cédric Villemain	3af5243bcc	Fix rsync return code test	2011-08-24 09:14:22 -05:00
Cédric Villemain	85bbae462a	Add --ignore-rsync-warning to README	2011-08-22 00:34:01 -05:00
Cédric Villemain	14e49d41c2	Add --ignore-rsync-warning command line option This fix the rsync return code in case there are vanished files. Common situation are DROPed tables and TEMPorary object deletion and are handled by PostgreSQL. But as it may exist situation where an external process delete files in the PGDATA the flag is off by default. XXX 2 items : * is -I a good choice ? maybe we need to prevent future --ignore-foo and add something like : --ignore=rsync_warning -I rsync_warning * the warning message is not enough explicit with the risk involved by --force usage	2011-08-22 00:32:40 -05:00
Cédric Villemain	1bd8a703c8	Fix getopt for ignore-rsync-warning The change was loosed during merge and not checked in master/	2011-06-06 20:56:45 -04:00